11.00EUR

Hardener Aero EPH 161 (250 g)
[R1121250]

Hardener Aero EPH 161 (250 g)

Hardener for Epoxy Resin L and L 20, EP Gel coat colourless and Mould Resin P
Contains no formaldehyde and no paraformaldehyde
Epoxy Resin L
Processing time: 90 minutes
Mixing ratio:
100 : 25 parts by weight of resin to hardener
100 : 29 parts by volume of resin to hardener
Curing time: 24 h at room temperature, followed by hot curing for: approx. 10 h at 60 °C
Max. heat distortion temperature after annealing: 120 °C
Laminate structures for vehicle construction in combination with this product and epoxy resin L are approved by the TÜV-Süd. Process instructions/TÜV-Report (unfortunately only in German)
Epoxy Resin L 20
The combination of L 20 and Hardener EPH 161 yields a low-viscosity laminating resin that exhibits superior impregnating and wetting properties to glass, aramid, and carbon fibres. In conjunction with L 20, hardener EPH 161 results in a long service life for the resin compound with very high mechanical and dynamic strengths and perfect curing in both thick (> 2 cm) and thin (1,5 mm) laminates. Before they can obtain the specified mechanical properties, the laminates must be post-cured for about fifteen hours at 60 °C after their initial cold-curing period.
The system L 20 + EPH 161 is approved for the construction of gliders.
Processing time: 90 minutes
Mixing ratio:
100 : 25 parts by weight of resin to hardener
100 : 29 parts by volume of resin to hardener
Curing time: 24 h at room temperature, followed by post-curing: for 15 h at 60 °C
Gel coat colourless
Processing time: 90 minutes
Mixing ratio:
100 : 24 parts by weight EP Gel coat : Hardener EPH 161
Curing time: 24 h at room temperature, afterwards hot curing approx. 10 h/60 °C (recommended, but not necessary).
Max. heat distorsion temperature after annealing: approx. 120 °C
Mould resin P
Processing time: 90 minutes
Mixing ratio:
100 : 17 parts by weight Mould Resin P : Hardener EPH 161
Gelling time: approx. 4 h
Curing time: 24 h at roomtemperature, afterwards hot curing: approx. 15 h/60 °C
Please order resin L and L 20, gel coatcolourless and mould resin P separately

under request

Reviews

Quick Find

Shopping Cart

4 x	4,8x1000 mm 2:1 red termoretract tube
3 x	12,7x1000 mm 2:1 green termoretract tube
1 x	19 mm 2:1 black termoretract tube
1 x	20 g tin paste
1 x	4,8x1000 mm 2:1 black termoretract tube
1 x	1,6x1000 mm 2:1 black termoretract tube
1 x	Oracover Black 2 m
2 x	2,4x1000 mm 2:1 red termoretract tube
1 x	Spannlack 1000 ml
2 x	Plasti Dip Liquid Tape 429 ml orange
2 x	Paint gun for sprays
1 x	Monokote BLANCO jet (1.8x0.65m)
2 x	Presto SF Light Filler styrene-free (420 g)
2 x	6,4x1000 mm 2:1 black termoretract tube
1 x	Nitroverdu 500 ml
3 x	3,2x1000 mm 2:1 red termoretract tube
2 x	6,4x1000 mm 2:1 red termoretract tube
1 x	Painting GHT Lexan Black 150 ml
1 x	3,2x1000 mm 2:1 black termoretract tube
1 x	Spray adhesive INFUTAC (Clear) 500 ml
2 x	6,4x1000 mm 2:1 green termoretract tube
2 x	37 mm PVC transparent battery termo-retract (1 m)
2 x	1,2x1000 mm 2:1 black termoretract tube
1 x	Monokote ROJO misil (1.8x0.65m)
2 x	12.7 mm 2:1 black termoretract tube
2 x	Partall paste 650 g
2 x	2,4x1000 mm 2:1 green termoretract tube
2 x	4,8x1000 mm 2:1 blue termoretract tube
2 x	135 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	Spray adhesive AEROFIX 2
2 x	165 mm PVC transparent battery termo-retract 165 mm (1 m)
2 x	105 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	Universal Colour Paste signal white (RAL 9003) 1 Kg
1 x	Spray Graphit 33
1 x	ORACOVER Ferrari red (2 m)
1 x	1000 ml sealer (DOPE)
1 x	Oracover Azul 2 m
1 x	Universal Colour Paste deep black 250 g
2 x	1,2x1000 mm 2:1 red termoretract tube
2 x	500 ml sealer (DOPE)
1 x	A/C quality beech plywood 1520x750x3.0 mm
1 x	Balsa panel 4.0x100x1000 mm
2 x	Balsa panel 1.5x100x1000 mm
1 x	A/C quality beech plywood 600x300x1.5 mm
1 x	BALSA trip 10x10x1000 mm
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	Balsa panel 2.0x100x1000 mm
1 x	BALSA triangular 6x6x1000 mm
1 x	A/C quality beech plywood 600x300x0.6 mm
1 x	Balsa panel 5.0x100x1000 mm
1 x	Balsa panel 2.5x100x1000 mm
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	A/C quality beech plywood 498x247x2.0 mm
1 x	Beech dowels 10 mm x 1000 mm
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	Balsa panel 8.0x100x1000 mm
1 x	BALSA triangular 15x15x1000 mm
1 x	A/C quality beech plywood 1520x750x4.0 mm
1 x	BALSA leading edge 8x10x1000 mm
1 x	A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x	BALSA trip 6.0x6.0x1000 mm
1 x	ABS angle 4,0x4,0x1000 mm
1 x	L-Connector 4.0 mm x 1000 mm
1 x	ABS angle 2,0x2,0x1000 mm
2 x	Rubber profile 6-2 mm 2M
2 x	Profile ABS half cane 7.0x1000 mm
1 x	Rubber profile 10-2 mm 2M
1 x	ABS angle 10,0x10,0x1000 mm
3 x	Profile ABS half cane 5.0x1000 mm
2 x	ABS rectangular profile 10x5.0x1000 mm
1 x	Profile ABS triangular 4.0x1000 mm 60º
2 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	Profile ABS half cane 2.0x1000 mm
1 x	Cross Connector 4.0 mm x 1000 mm
1 x	Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x	ABS "T" angle 8.0x8.0x1000 mm
2 x	ABS rectangular profile 12x6.0x1000 mm
2 x	Rubber profile 8-2 mm 2M
1 x	Spray YELLOW Inca Lexan 150ml
1 x	800TVL CMOS camera for FPV
1 x	Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x	USB Mini Camera endoscope
1 x	Ply-Span 450x600/13g Red
1 x	2,4x1000 mm 2:1 black termoretract tube
1 x	PVC termo-retract battery 45 mm transparent orange (1 m)
2 x	6,4x1000 mm 2:1 blue termoretract tube
1 x	Ply-Span 450x600/13g White
1 x	Ply-Span 450x600/13g Orange
1 x	Ply-Span 450x600/13g Yellow
1 x	PVC yellow-orange transparent battery termo-retract 57 mm (1 m)
1 x	PVC termo-retract battery 45 mm black transparent (1 m)
1 x	Ply-Span 450x600/13g Blue
1 x	PVC yellow transparent battery termo-retract 68 mm (1 m)
1 x	Straightened rod Ø 14.0 mm x 1000 mm
1 x	Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x	Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm
1 x	41x5,5 mm wires output (2 pcs)
1 x	Spray EC Red 400ml
1 x	Monokote BLUE metalizado (1.8x0.65m)
1 x	A/C quality beech plywood 600x300x5.0 mm
1 x	BALSA triangular 8x8x1000 mm
1 x	Balsa panel 10x100x1000 mm
1 x	Balsa panel 6.0x100x1000 mm
1 x	Sanyo RX Battery Eneloop 6,0 V Futaba
1 x	ABS "T" angle 10.0x10.0x1000 mm
1 x	Sanyo Eneloop AA 1,2 V battery 2000 mAh
1 x	Profile ABS triangular 4.0x1000 mm 90º
1 x	Profile ABS half cane 6.0x1000 mm
1 x	Streamline Stainless Steel Tubing 11.5x6.5x1000 m
1 x	Sanyo TX Battery Eneloop 7,2 V MPX
1 x	Sanyo RX Battery Eneloop 6,0 V JR
2 x	Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x	Sanyo RX Battery Eneloop 4,8 V JR
1 x	L-Connector 1.0 mm x 1000 mm
1 x	Profile ABS half cane 8.0x1000 mm
1 x	Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x	U Profile ABS 2,0x4,0x1000 mm
1 x	Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x	Battery Protection Circuit Board 22.2v 6s
1 x	2 mm Prop Adapter M5
1 x	Profile ABS Square 4 x 1000 mm
1 x	Servo Dymond D 37 Eco
1 x	Flat Connector 4.0 mm x 1000 mm
2 x	Profile ABS Square 3 x 1000 mm
1 x	PARTALL® Hi-Temp Wax, 340 g
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m

1,617.78EUR