11.00EUR

Hardener Aero EPH 161 (250 g)
[R1121250]

Hardener Aero EPH 161 (250 g)

Hardener for Epoxy Resin L and L 20, EP Gel coat colourless and Mould Resin P
Contains no formaldehyde and no paraformaldehyde
Epoxy Resin L
Processing time: 90 minutes
Mixing ratio:
100 : 25 parts by weight of resin to hardener
100 : 29 parts by volume of resin to hardener
Curing time: 24 h at room temperature, followed by hot curing for: approx. 10 h at 60 °C
Max. heat distortion temperature after annealing: 120 °C
Laminate structures for vehicle construction in combination with this product and epoxy resin L are approved by the TÜV-Süd. Process instructions/TÜV-Report (unfortunately only in German)
Epoxy Resin L 20
The combination of L 20 and Hardener EPH 161 yields a low-viscosity laminating resin that exhibits superior impregnating and wetting properties to glass, aramid, and carbon fibres. In conjunction with L 20, hardener EPH 161 results in a long service life for the resin compound with very high mechanical and dynamic strengths and perfect curing in both thick (> 2 cm) and thin (1,5 mm) laminates. Before they can obtain the specified mechanical properties, the laminates must be post-cured for about fifteen hours at 60 °C after their initial cold-curing period.
The system L 20 + EPH 161 is approved for the construction of gliders.
Processing time: 90 minutes
Mixing ratio:
100 : 25 parts by weight of resin to hardener
100 : 29 parts by volume of resin to hardener
Curing time: 24 h at room temperature, followed by post-curing: for 15 h at 60 °C
Gel coat colourless
Processing time: 90 minutes
Mixing ratio:
100 : 24 parts by weight EP Gel coat : Hardener EPH 161
Curing time: 24 h at room temperature, afterwards hot curing approx. 10 h/60 °C (recommended, but not necessary).
Max. heat distorsion temperature after annealing: approx. 120 °C
Mould resin P
Processing time: 90 minutes
Mixing ratio:
100 : 17 parts by weight Mould Resin P : Hardener EPH 161
Gelling time: approx. 4 h
Curing time: 24 h at roomtemperature, afterwards hot curing: approx. 15 h/60 °C
Please order resin L and L 20, gel coatcolourless and mould resin P separately

under request

Reviews

Quick Find

Shopping Cart

1 x	20 g tin paste
2 x	Presto SF Light Filler styrene-free (420 g)
2 x	Nitroverdu 500 ml
2 x	Hobbylite Filler, Balsa colour
3 x	Painting GHT Lexan Black 150 ml
2 x	Plasti Dip Liquid Tape 429 ml black
1 x	Spray adhesive INFUTAC (Clear) 500 ml
2 x	Universal Colour Paste signal white (RAL 9003) 1 Kg
2 x	Plasti Dip Liquid Tape 429 ml orange
2 x	Universal Colour Paste white 50 g
1 x	500 ml sealer (DOPE)
2 x	Solvent Plasti Dip 1000 ml
2 x	1000 ml sealer (DOPE)
2 x	Oratex Natural White 2m
1 x	Oratex Yellow Cub 10 m
2 x	Oracover Brown 2 m
1 x	Monokote BLUE metalizado (1.8x0.65m)
1 x	ORACOVER Fluor red (2 m)
2 x	Oratex Silver 2m
2 x	Oracover Yellow CUB 10 m
1 x	Ply-Span 450x600/13g Yellow
1 x	Ply-Span 450x600/13g Black
1 x	Oracover CHROME 2m
1 x	Oracover Yellow CUB 2 m
1 x	Oracover Azul 2 m
1 x	Oracover White 10 m
2 x	Oratex Natural White 20m
1 x	Oracover CARBON Metalic 1 m
1 x	Oracover Black 2 m
1 x	ORACOVER Ferrari red (2 m)
1 x	Oracover White 2 m
1 x	Oracover Azul Cielo 2 m
1 x	Oracover Yellow CADMIO 10 m
1 x	Monokote PLATINO metalizado (1.8x0.65m)
1 x	Oracover Verde 2 m
1 x	SE Ring 250 mm (2 pcs)
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
2 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Tape GFK 38 mm
1 x	SE Ring 400 mm (2 pcs)
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	SE Ring 360 mm (2 pcs)
1 x	Silent-blocks DLE 170M
1 x	Para-RC Trike "RC-Bullix"
1 x	Parachute PV6 for F3J
1 x	Trike XL motor set (motor+esc+prop)
2 x	Parachute BACKUP X100
2 x	Aramid 50 daN 50 m
2 x	Para-RC Mix
2 x	Set cintas unión paracaídas 145 cm
1 x	MAX pilot ARTF
1 x	Windsock Ozone L - 700 mm
1 x	Para-RC "RC-Evo-Cross" Rescue
1 x	Wing OXY 0,5 pulgadas2
1 x	Paramotor BackPack XXS 2
1 x	Paramotor Kit Camo H1.5/ Ben Red
1 x	Parachute P4
1 x	Ballast 700gr OPALE
1 x	Paramotor BackPack XXS (without accessories)
1 x	Windsock Ozone L -1200 mm
1 x	Screw-lock connector M2 (2 uds)
1 x	Paint gun for sprays
1 x
1 x	Stainless steel cable Ø 0.5 mm (2 m)
1 x	Spray EC Red 400ml
1 x	Spray YELLOW Inca Lexan 150ml
1 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x	Ferrita 17x10x6.5 mm
1 x	Canopy Latch
1 x	Ferrita con funda
1 x	Motor A2212/13T
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	L cockpit anchor "tipe F3A" (2 pcs)
1 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x	Steering arm 12 mm Ø 4 mm
1 x	Locking cable tie 2.5x100 (uds)
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	Partall paste 650 g
1 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	Stainless steel cable Ø 0.5 mm (10 m)
1 x	Steering arm 12 mm Ø 4 mm (2 uds)
1 x	Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x	SUS wire 3m (nylon coated)
1 x	Steering arm 16 mm Ø 4 mm
1 x	Electric spoiler 250 mm (2 pcs)
1 x	Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
1 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	Spray adhesive AEROFIX 2
1 x	Universal Colour Paste deep black 250 g
1 x	Ferrita 14x8x5.5 mm
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Horn 6/27 with M3 Bearing
1 x	White smoke canister 65 g
1 x	Connectors banna gold 5,5 mm (M/F)
1 x	Extension silicon 10 cm (Graupner)
1 x	Straightened rod Ø 5.0 mm x 1000 mm
3 x	Oratex Antik 2m
2 x	Ply-Span 450x600/13g Blue
1 x	6,4x1000 mm 2:1 green termoretract tube
1 x	1,2x1000 mm 2:1 red termoretract tube
1 x	3,2x1000 mm 2:1 red termoretract tube
1 x	PVC transparent red battery termo-retract 68 mm (10 m)
1 x	4,8x1000 mm 2:1 red termoretract tube
1 x	ORACOVER transparent Yellow (10 m)
1 x	1,6x1000 mm 2:1 red termoretract tube
1 x	58 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	PVC yellow transparent battery termo-retract 68 mm (1 m)
2 x	MYLAR film A350 (1000x500 mm)
2 x	Oratex Red Fokker 10 m
1 x	PVC transparent battery termo-retract 70 mm (10 m)
1 x	Oracover Black 10 m
1 x	Papel japones 12 grs/m2 760x510 mm JAPICO
1 x	Oracover Red 2 m
2 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	Marker ties (20 pcs)
1 x	SE Ring 200 mm (2 pcs)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	PROFICOVER 5m
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	SE Ring 240 mm (2 pcs)
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	20x200 mm battery rings
1 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	200m servo "Premium" wire (white/red/blue)
1 x	Fiberglass heat shield Ø 6 mm 1000 mm
1 x	Conexion PREMIUM MAXI fuselaje/alas 200 cm one4one
1 x	Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x	Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x	TX 250 mW especial GOPRO
1 x	Motor DLE 200cc Premium Muffler
1 x	Opale Rucksack
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Cable video GoPro and 5V cable

11,856.73EUR