11.00EUR

Hardener Aero EPH 161 (250 g)
[R1121250]

Hardener Aero EPH 161 (250 g)

Hardener for Epoxy Resin L and L 20, EP Gel coat colourless and Mould Resin P
Contains no formaldehyde and no paraformaldehyde
Epoxy Resin L
Processing time: 90 minutes
Mixing ratio:
100 : 25 parts by weight of resin to hardener
100 : 29 parts by volume of resin to hardener
Curing time: 24 h at room temperature, followed by hot curing for: approx. 10 h at 60 °C
Max. heat distortion temperature after annealing: 120 °C
Laminate structures for vehicle construction in combination with this product and epoxy resin L are approved by the TÜV-Süd. Process instructions/TÜV-Report (unfortunately only in German)
Epoxy Resin L 20
The combination of L 20 and Hardener EPH 161 yields a low-viscosity laminating resin that exhibits superior impregnating and wetting properties to glass, aramid, and carbon fibres. In conjunction with L 20, hardener EPH 161 results in a long service life for the resin compound with very high mechanical and dynamic strengths and perfect curing in both thick (> 2 cm) and thin (1,5 mm) laminates. Before they can obtain the specified mechanical properties, the laminates must be post-cured for about fifteen hours at 60 °C after their initial cold-curing period.
The system L 20 + EPH 161 is approved for the construction of gliders.
Processing time: 90 minutes
Mixing ratio:
100 : 25 parts by weight of resin to hardener
100 : 29 parts by volume of resin to hardener
Curing time: 24 h at room temperature, followed by post-curing: for 15 h at 60 °C
Gel coat colourless
Processing time: 90 minutes
Mixing ratio:
100 : 24 parts by weight EP Gel coat : Hardener EPH 161
Curing time: 24 h at room temperature, afterwards hot curing approx. 10 h/60 °C (recommended, but not necessary).
Max. heat distorsion temperature after annealing: approx. 120 °C
Mould resin P
Processing time: 90 minutes
Mixing ratio:
100 : 17 parts by weight Mould Resin P : Hardener EPH 161
Gelling time: approx. 4 h
Curing time: 24 h at roomtemperature, afterwards hot curing: approx. 15 h/60 °C
Please order resin L and L 20, gel coatcolourless and mould resin P separately

under request

Reviews

Quick Find

Shopping Cart

1 x	ABS 500 x 400 x 0,5 mm (white)
1 x	Buy Perforated film 100 cm / 10 m
1 x	Aluminium sheet 500x250x0,5mm
2 x	ARAMID honeycomb 1300x2600x2 mm
1 x	ABS 500 x 400 x 1 mm (white)
3 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	ABS 500 x 400 x 1,5 mm (white)
1 x	Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
3 x	ABS 500 x 400 x 2,0 mm (white)
1 x	Breatex™ Non-woven absorber 300 g/m² Roll 41 m
1 x	Carbon fibre sandwich sheet 350x150x3 mm
2 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	Carbon fibre sleeve 12k 170 mm x 5m
1 x	Aluminium wide washer M3 blue (4 pcs)
1 x	Quicklock washer 2.5 mm (10 pcs)
1 x	Spring lock washer 2.1 mm (20 pcs)
1 x	Flat washer 4.3 mm (20 pcs)
1 x	Aluminium cap bolt washer M3 black (8 pcs)
2 x	Spring lock washer 3.1 mm (20 pcs)
1 x	Quicklock washer 1 mm (10 pcs)
1 x	Aluminium cap bolt washer M3 green (8 pcs)
1 x	Aluminium cap bolt washer M3 blue (8 pcs)
1 x	Lock washer 3.2 mm (20 pcs)
2 x	M3 black washers (4 pcs)
1 x	Flat washer 2.7 mm (20 uds)pcs)
2 x	Lock washer 2.2 mm (20 pcs)
1 x	Quicklock washer 3.5 mm (10 pcs)
1 x	Aluminium wide washer M4 Red (4 pcs)
2 x	Spring lock washer 4.1 mm (20 pcs)
1 x	M3-M4 rubber washer (8 pcs)
1 x	Spring lock washer 2.6 mm (20 pcs)
2 x	Cable S.BUS 3 salidas 100 mm
3 x	Extension silicon 10 cm (Graupner)
1 x	Premium servo extension 25cm
1 x	Foam plastic plates (310x210x3 mm)
1 x	Thermoforming sheet 0.3mm (0.039in) DIN A4
1 x	PVC plate 320 x 194 x 0.23 mm (brown)
2 x	Prolongador S-Bus JR/JR 10cm
1 x	PVC grid diagonal 290x185x0.32 mm
1 x	Extension silicon 30 cm female (Graupner)
1 x	Fiberglass plate 350x150x0.3 mm
1 x	Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m
1 x	Thermoforming sheet 0.5mm (0.02in) DIN A4
2 x	Cable silicona macho batt. receptor 30 cm (Graupner)
1 x	Foam plastic plates (310x210x5 mm)
2 x	Extension 100 cm (Futaba)
2 x	Premium servo extension 100cm
1 x	Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs)
1 x	Extension 15 cm (Futaba)
1 x	Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m
3 x	Extension 30 cm (Futaba)
1 x	Premium servo extension 75cm
1 x	PVC grid straight 290x185x0.32 mm
3 x	Extension silicon 35 cm male (Futaba)
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x	Styrene plate 320x120x1.0 mm
2 x	silicon 100 cm Futaba Extension Ø 0,35 mm
3 x	Extension 7.5 cm
2 x	Futaba Female 40 cm extension
1 x	Extension silicon 100 cm (Graupner)
1 x	Fiberglass plate 350x150x0.5 mm
1 x	Fiberglass plate 350x150x2.5 mm
1 x	Foam plastic plates (310x210x2 mm)
1 x	Sheet Depron Aero 1250x800x3 mm
1 x	0,14 mm PVC servo wire extension, ZH micro conector.
1 x	Extension lead 15 cm Multiplex
1 x	Carbon roving DowAksa / 24k / 1600 tex
1 x	Extension silicon 10 cm (Futaba)
1 x	Cable silicona macho batt. receptor 30 cm (Futaba)
1 x	Chopped glass fibre strands 3 mm
2 x	Cabel "Y" 30 cm (Futaba)
2 x	Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x	Extension PVC 150 cm (Graupner)
1 x	Demoulding wedge red (40 x 20 mm) 5 pcs
1 x	Circlick securite
1 x	Styrene plate 320x120x0.5 mm
2 x	Extension silicon 30 cm female (Futaba)
1 x	ABS tube 5.0x4.0x1000 mm
1 x	ABS tube 3.0x1.0x1000 mm
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x	Ball link M3 RPA's-UAV's
1 x	Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x	Oratex Natural White 2m
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	Breatex™ Non-woven absorber 150 g/m² Roll 50m
1 x	PIT (Aero-Naut)
1 x	Hexagonal Nut M3 (10 pcs)
2 x	Extension silicon 30 cm male (Graupner)
1 x	Nut for mounting M5 (4 pcs)
1 x	Screw M2x8 (10 pcs)
1 x	Screw M4x20 (10 pcs)
1 x	Tapping Screw M2.2x9.5 (10 pcs)
1 x	Flat washer 2.2 mm (20 pcs)
1 x	Screws 2,2 x 6,5 mm (20 pcs)
1 x	Pan Head Screw M2x6 PH
1 x	Titanium M3x0,5x8 mm Flat Head screw (4 pcs)
1 x	Hexagonal Nut M4 (10 pcs)
1 x	Resistor 3W 5% OR82
1 x	Cover cap drop-shaped paintable 43 mm
1 x	Screw M2x6 (10 pcs)
1 x	Combo lighting module with covering drop shape
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
2 x	Futaba male 40 cm extension
1 x	Buy Perforated film 145 cm / 50 m
2 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
3 x	Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x	Extension silicon 75 cm (Futaba)
1 x	Mixing tube for double syringes and cartridges (MR 1:1 and 2:1)
1 x	Vacuum bag, 1200 mm x 50 m
1 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x	servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
3 x	Futaba Female 40 cm extension
1 x	Servo inverter
1 x	HITEC DPC-11 programmer
1 x	Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x	Green silicone 0,25 mm² wire (25 m)
1 x	Fiberglass heat shield Ø 8 mm 1000 mm
1 x	Black silicone 1,0 qmm wire (50 m)
1 x	Green silicone 0,25 qmm wire (50 m)
1 x	Extension silicon 30 cm male (Futaba)
1 x	Extension silicon 50 cm (Graupner)
1 x	Extension silicon 25 cm (Graupner)
1 x	Cable S.BUS 3 salidas 300 mm
1 x	TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x	Extension silicon 75 cm (Graupner)
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 20m
2 x	Extension silicon 25 cm (Futaba)
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x	Fibra de vidrio 100 g/m² (50 m x 100 cm)
1 x	Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x	Carbon Non-Woven, 240 g/m² 100 cm x 20 m
2 x	Extension silicon 100 cm (Futaba)
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 5 m
1 x	Extension 90 cm (Futaba)
1 x	Fibra vidrio 25g 110 cm/ 100m (Interglass 02034, finish FE800 p
1 x	Cabel "Y" 15 cm
1 x	Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm

6,538.50EUR