59.00EUR

Tubo carbono/kevlar 3K-PW (Ø25 mm, Ø22.5 mm L:1500 mm)
[R7425232-A]

Tubo de carbono 3K-PW, 25 mm diámetro exterior, 22.5 mm diámetro interior y 1500 mm de longitud.

Roll wrapped carbon fibre tubes with a smooth surface finish of 3k carbon farbic prepreg in plain weave, clear-coated glossy with an intermediate layer of aramid fabric as fragmentation protection. Subjacent layers from unidirectional non-crimp fabric. High quality epoxy resin matrix.

Fibre orientation:
Surface: 0°/90°
Core: 0°

Characteristics:
Light weight, excellent corrosion and heat resistance and electrical conductivity. Very good flexural and hoop stiffness.

After laminating, the wound CFK round tubes are ground (round) to size and then coated.

Tolerances:
Deviation in diameter ± 0.2 mm. Deviation in straightness max. 2 mm/m. The measured values are generally far below the maximum.

Bajo pedido

Comentarios

Búsqueda Rápida

Cesta de Compras

1 x	Liston ABS 2.0x3.0x1000 mm
1 x	Liston ABS 1,0x4,0x1000 mm
1 x	Liston ABS 2.0x5.0x1000 mm
1 x	Varilla ABS 2,0x1000 mm
1 x	Varilla ABS 4,0x1000 mm
1 x	Varilla ABS 5,0x1000 mm
1 x	Varilla ABS 1,25x1000 mm
1 x	Liston ABS 1,0x5,0x1000 mm
1 x	Liston ABS 1,5x2,0x1000 mm
1 x	Varilla ABS 6,0x1000 mm
1 x	Varilla ABS 3,0x1000 mm
2 x	Liston ABS 2.0x10.0x1000 mm
1 x	Liston ABS I 20x10x1000 mm
1 x	Liston ABS 1,5x8,0x1000 mm
1 x	Liston ABS I 2,5x1,25x330 mm
1 x	Liston ABS 1,5x6,0x1000 mm
2 x	Varilla ABS 1,0x1000 mm
2 x	Liston ABS 1,0x2,0x1000 mm
1 x	Liston ABS I 10x5x1000 mm
2 x	Varilla acero Ø 0,5 mm x 1000 mm
1 x	Varilla acero Ø 4,0 mm x 1000 mm
2 x	Varilla acero roscada M2 - 1m
2 x	Varilla acero Ø 5,0 mm x 1000 mm
1 x	Varilla acero Ø 2,0 mm x 1000 mm
3 x	Varilla latón hexagonal Ø 3.5 mm x 1000 mm
2 x	Varilla acero Ø 6,0 mm x 1000 mm
1 x	Perfil Acero Inox. 9.0x5.0x1000 mm
1 x	Conector ABS "L" 4.0 mm x 1000 mm
1 x	Perfil de ABS "T" 6.0x6.0x1000 mm
1 x	Canal de ABS de 1,0x2,0x1000 mm
1 x	Perfil de ABS cuadrado 2 x 1000 mm
1 x	Perfil Acero Inox. 19.5x9.8x1000 mm
1 x	Perfil de ABS "L" 10,0x10,0x1000 mm
1 x	Interface Realflight Simulator
1 x	Cable "Y" equilibrador 7S, 2x JST-XH / 1x JST-EH
1 x	Adaptador JST-XH
1 x	Bayoneta: Fibra de vidrio/Carbono (13.7/12.5) x 1000 mm
1 x	Tubo ABS 8,0x7,0x1000 mm
1 x	Acople ALU M2 Ø 3 (2 uds)
1 x	Cable servos PVC 0,08 mm2 Futaba (5 m)
1 x	Arandela abierta 2.6 mm (20 pcs)
1 x	Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x	Sun Cover PC 21 XXL (JMB Jets)
1 x	Liston ABS 1,5x3,0x1000 mm
1 x	Liston ABS H 2,0x2,0x330 mm
2 x	Varilla acero Ø 14,0 mm x 1000 mm
1 x	Varilla latón Ø 1,0 mm x 1000 mm
1 x	Varilla latón Ø 1,5 mm x 1000 mm
1 x	Varilla acero Ø 1,2 mm x 1500 mm
2 x	Varilla acero Ø 3,0 mm x 1000 mm
2 x	Varilla latón hexagonal Ø 3 mm x 1000 mm
1 x	Varilla latón Ø 0,5 mm x 1000 mm
1 x	Varilla acero Ø 1,0 mm x 1000 mm
2 x	Varilla latón hexagonal Ø 4 mm x 1000 mm
1 x	Varilla acero Ø 4,5 mm x 1000 mm
3 x	Varilla Aluminio Ø 4,0 mm x 3000 mm
2 x	Varilla acero Ø 0,8 mm x 1000 mm
1 x	Varilla latón Ø 0,8 mm x 1000 mm
1 x	Varilla acero Ø 8,0 mm x 1000 mm
1 x	Varilla latón hexagonal Ø 5 mm x 1000 mm
1 x	PowerPack 2.5X2 PRO
1 x	Bateria RX JETI LiIon RB 5200 7.2v
1 x	Servo KST X08H V5.0 HV DIGITAL Wing servo 8mm
1 x	Brazo servo aluminio 15-10 mm Futaba/MKS/Savox
1 x	SERVO DES 707 BB MG
1 x	Brazo servo aluminio 1.25/1.5" Futaba/MKS/Savox
1 x	Brazo Servo XTorque 38 mm DES
1 x	Caja para guardar baterías LiPo Std
1 x	Bateria LiFe TopFuel 3100 mAh 3s MTAG 30C
1 x	Tester batería universal
1 x	Cable silicona hembra batt. receptor 30 cm (Futaba)
1 x	Prolongador cable servo 0,14 PVC, conector ZH micro
1 x	Extension silicona 30 cm hembra (Futaba)
1 x	Prolongador 30 cm (Futaba)
1 x	Prolongador cable servo 0,14 PVC, conector ZH micro
1 x	Prolongador 15 cm (Futaba)
1 x	SIMtransmitter 6 Modo 2
1 x	Interface Jack Adapter IKARUS

1,348.39EUR