96.00EUR

Epoxy 40 min (Resin). 5 Kg
[R1001351]

General information about the system Epoxy Resin L with different hardeners

Low viscosity, free of solvents and fillers
Fast impregnation of glass, aramid, and carbon fibres
High static and dynamic strength
Epoxy Resin L with the corresponding hardeners is the most commonly used laminating and adhesive resin in the R&G delivery programme.

In conjunction with the Hardeners S (15 minutes), L (40 minutes), CL (60 minutes), EPH 500 (60 minutes), EPH 161 (90 minutes), W 300 (300 minutes), GL 1 (30 minutes) and GL 2 (210 minutes), this epoxy resin exhibits similar mechanical properties to those of the laminating systems usual aerospace .Its heat deflection temperature reaches from 60 °C (S, L, EPH 500, W 300), to 80 °C (GL 1 and GL 2, after post-curing), to 95 °C (CL, after post-curing) and finally to 120 °C (EPH 161, after post-curing).

Epoxy Resin L has a low viscosity, is free of solvents and fillers, and ideal for impregnating glass, aramid, and carbon fibres. Its low surface tension, good adhesion, and minimal curing shrinkage makes it ideal for bonding wood, metal, foamed polystyrene, etc. It can be processed in all of the customary methods, e.g. hand lay-up operations, pressure and vacuum impregnation, press moulding, winding, etc.

The well-proven R&G Epoxy Resin L in combination with Hardeners GL 1 and GL 2 offer an approval by the Germanische Lloyd for the construction of boats and rotor blades for wind turbines.
Expertise for the resin systems Epoxy Resin L + Hardener S, Epoxy Resin L + Hardener L, Epoxy Resin L + Hardener CL and Epoxy Resin L + Hardener EPH 500: these are not cytotoxic (cell damaging), important for applications in medical purposes.
Laminate structures for vehicle construction in combination with Hardener EPH 161 are approved by the TÜV-Süd (Document available in german language only).

Suitable hardeners for Epoxy Resin L:

Hardener S
Potlife: 20 minutes
Mixing ratio: 100 : 40 parts by weight resin to hardener, 100 : 45 parts by volume resin to hardener
Order no. 100 139-0 to 100 140-5

Hardener L
Potlife: 40 minutes
Mixing ratio: 100 : 40 parts by weight resin to hardener, 100 : 45 parts by volume resin to hardener
Order no. 100 144-0 to 100 145-5

Hardener EPH 161
Potlife: 90 minutes
Mixing ratio: 100 : 25 parts by weight resin to hardener, 100 : 49 parts by volume resin to hardener
Order no. 112 123-5 to 112 125-4

Hardener EPH 500
Potlife: 60 minutes
Mixing ratio: 100 : 63 parts by weight resin to hardener, 100 : 71 parts by volume resin to hardener
Order no. 100 147-2 to 100 147-8

Hardener W 300
Potlife: 300 minutes
Mixing ratio: 100 : 35 parts by weight resin to hardener, 100 : 42 parts by volume resin to hardener
Order no. 100 149-4 to 100 149-7

Hardener GL 1
Potlife: 30 minutes
Mixing ratio: 100 : 30 parts by weight resin to hardener, 100 : 35 parts by volume resin to hardener
Order no. 104 095-3 to 104 095-7

Hardener GL 2
Potlife: 210 minutes
Mixing ratio: 100 : 30 parts by weight resin to hardener, 100 : 35 parts by volume resin to hardener
Order no. 104 100-3 to 104 100-7

Hardener CL
Potlife: 60 minutes
Mixing ratio: 100 : 30 parts by weight resin to hardener, 100 : 35 parts by volume resin to hardener
Order no. 109 285-H-3 to 109 285-H-6

Please order hardener separately

under request

Reviews

Quick Find

Shopping Cart

2 x	Cap Hispano Aviación
2 x	Shirt Hispano Aviación
1 x	Vest clothes Hispano Aviación
1 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x	Release wax 250ml
2 x	ARAMID honeycomb 1300x2600x2 mm
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x	Cyanocrylate MD GA460 odourless 20g
1 x	PARTALL® Hi-Temp Wax, 340 g
1 x	Screwdriver for Torx® TX6
1 x	Dust collector for mould cleaning
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x	1,5x50 mm allen screwdriver
1 x
1 x	Starter Sullivan-STAR 603 DINATRON
1 x	Crimping tool
1 x	3,0x60 mm allen screwdriver
1 x	Cut tube
1 x	Screwdriver for Torx® TX8
1 x	Ball Link Plier
1 x	Crimping tool
1 x	Ball Link Plier
1 x	Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x	Starter EM Gear Power 250
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x	Hexagonal ball head 2.0 x 50 mm
1 x	Copier 2x20 cm pcs
1 x	Starter 12v (Max 180 and 30ccm)
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
1 x	2,0x50 mm allen screwdriver
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	Large flex hinge (12 uds)
2 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x	18 mm reinforced hinge
1 x	Gates hinge black 30x16 mm (2 pcs)
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	Pin type hinge Al 6x98 mm (2 pcs)
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	Lock washer 2.7 mm (20 pcs)
1 x	BALSA triangular 10x10x1000 mm
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x	Premium servo extension 75cm
1 x	B4-0 rocket charges (6 pcs)
1 x	One touch canopy lock
1 x	Head lower part
1 x	resin-hardener package L-385 with hardener H-385
1 x	resin-hardener package L-385 with hardener H-385 (875 g)
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg
1 x	Softshell Hispano Aviación
1 x	Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g
1 x	Ball joint long
1 x	Blade holder lower
1 x	Nut M1,6
1 x	ALBATROS 3.0 m (orange/white)
1 x	Astra (Top Model)
1 x	LA500 housing-lower cyclic
1 x	Gracia Maxi ARF, bags (Top Model)
1 x	Aero-Master (Aero-naut)
1 x	LA500 pre-rotation gear
1 x	LA500 rotor head shaft
1 x	Q-12 2000 mm Electric
1 x	Gracia (Top Model)
1 x	Screwdriver for Hexagon 1,27mm
1 x	E-FUN BUG (ROI-Import)
1 x	XICOY X45 rail
1 x	Electric spoiler 440 mm (2 pcs)
1 x	Anntena Panel 5,8 GHz - 14 dBi
1 x	Medium pin type hinge (12 uds)
1 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	250 mm / 16 mm Airbrakes
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 100m
1 x	Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm)
1 x	Carbon fiber flat 1000x6.0x0.8 mm
1 x	Glass fabric 80 g/m² (twill) 100 cm x 50m
1 x	Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm)
1 x	Chopped glass fibre strands 0.2 mm
1 x	Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm)
1 x	Epoxy 40 min (Resin). 25Kg
1 x	Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm
1 x	Carbon tube (L 2000 mm, Ø16 mm, Ø14 mm)
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
2 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x	Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm)
2 x	Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø22.5 mm)
1 x	Glass fabric 49 g/m² (1,27 x 20 m)
1 x	Glass fabric 80 g/m² (silane, twill) 100 cm x 10m
1 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	CA Glue fast 20g
1 x	Glass fabric 390 g/m² (silane, twill) 100 cm x 20m
1 x	Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm)
1 x	Epoxy 5 min. 200g
1 x	Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm)
1 x	Fiberglass 163 g/m² 1m x 5 m (Twill)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø19 mm, Ø15 mm)
1 x	Epoxy adhesivo Elan-tech ADH 981.892 50ml (dark grey)
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	Fibra de vidrio 80 g/m² (5 m x 100 cm)
1 x	Chopped glass fibre strands 3 mm
1 x	Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min)
1 x	Carbon fiber rod 1.5 mm x 2000 mm
1 x	Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm)

6,784.30EUR