7.00EUR

Cyanoacrylate MD GLUE plus 405, for extreme loads 20g
[R1501215]

Superglue for extreme loading conditions

Viscous, impact-resistant, high-tensile, heat-resistant, foaming resistant
ca. six times greater impact strength and ten times greater shear strength than conventional CA adhesives
Very high lap shear strength (240 kg/cm² = 24 MPa; for steel on steel)
Max thermal resistance +135 °C (at this high temperature the adhesive still exhibits a lap shear strength of 60 kg/cm² = 6 MPa; for steel on steel)
Excellent water resistance
Viscosity approx. 3000 mPa·s
This one-component ethyl cyanoacrylate adhesives sets quickly to yield a transparent bond ideal for balsa wood and materials exhibiting low porosity, e.g. metals, rubbers and plastics
Content: 20 g

Storage and shelf life:
Our superglue can be stored in a cool and dark place for about 1 year (for example in the refrigerator at + 5 °C).
At room temperature about 6 months. At temperatures above 20 °C the shelf life is further reduced (e. g. in the summer months)

temporarily out of stock

Reviews

Quick Find

Shopping Cart

1 x	Pine wood slat 6.0x6.0x1000 mm
1 x	BALSA leading edge 8x10x1000 mm
1 x	Beech dowels 3.0 x 1000 mm
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	Linden wood slat 2.0x2.0x1000 mm
1 x	Walnut wood slat 3.0x3.0x1000 mm
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Pine wood slat 3.0x5.0x1000 mm
1 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	Beech dowels 4.0 x 1000 mm
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	Pine wood slat 3.0x7.0x1000 mm
1 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	BALSA trip 8.0x8.0x1000 mm
1 x	Beech dowels 2.0 x 1000 mm
1 x	Pine wood slat 10x10x1000 mm
1 x	Liston HAYA 3 x 10 x 1000 mm
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	Beech dowels 10 mm x 1000 mm
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	OBECHI sheet 2.0x3.0x1000 mm
1 x	Mahogany wood slat 1.5x1.5x1000 mm
1 x	BALSA triangular 15x15x1000 mm
1 x	BALSA triangular 6x6x1000 mm
1 x	BALSA trip 10x10x1000 mm
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Pine wood slat 5.0x5.0x1000 mm
1 x	BALSA triangular 10x10x1000 mm
1 x	Truck-trailer for gliders 720 x 285 mm
1 x	2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x	Tube Pitot to PIXHAWK
1 x	ABS angle 6,0x6,0x1000 mm
1 x	Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x	U Profile ABS 2,0x4,0x1000 mm
1 x	ABS angle 10,0x10,0x1000 mm
1 x	ABS "T" angle 2.0x2.0x1000 mm
1 x	Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x	U Profile ABS 8,0x4,0x1000 mm
1 x	Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x	Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x	Profile ABS Square 2 x 1000 mm
1 x	U Profile ABS 3,0x6,0x1000 mm
1 x	Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x	U Profile ABS 5,0x10,0x1000 mm
1 x	L-Connector 1.5 mm x 1000 mm
1 x	ABS "T" angle 8.0x8.0x1000 mm
2 x	Profile ABS Square 4 x 1000 mm
1 x	Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x	U Profile ABS 1,0x2,0x1000 mm
1 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	Profile ABS Square 3 x 1000 mm
1 x	ABS angle 3,0x3,0x1000 mm
1 x	Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x	ABS "T" angle 10.0x10.0x1000 mm
1 x	Profile ABS half cane 2.5x1000 mm
1 x	Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x	Starter 12v (Max 180 and 30ccm)
1 x	Hexagonal ball head 2.0 x 50 mm
1 x	Blue metalic ball link M3/3 azul (2 pcs)
1 x	Horn 6/27 with M3 Bearing
1 x	1/4 Pilot "Mike"
1 x	LUCAS pilot ARTF
1 x	Crystal RX 35.120 Ch 72
1 x	Aro pasacable Ø25 mm (4 pcs)
1 x	Support FUEL DOT V3
1 x	Trailing edge BALSA 35x8x1000 mm
1 x	Angle measurer
2 x	Angle of incidence meter
2 x	Servo NARO Max Std
1 x	Medidor ángulos y/o incidencias
1 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x	CA Glue fast 20g
1 x	Vacuum bag, 1200 mm x 50 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x	Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x	Propeller balancer
1 x	ARAMID honeycomb 1300x2600x2 mm

1,925.02EUR