4.50EUR

CA Glue fast 20g
[R1501032]

Superglue (fast) is a normal type Cyanoacrylate adhesive with fast setting, high flow abilit, and good penetration characteristics.

It has been specially formulated to achieve the strongest possible bond between well-mated, non-porous surfaces, such as rubber, metals, plastics, glass, etc.

Single-component
Transparent
Very low viscosity, high setting speed
Bonds obtain hand strength after 2-15 seconds
Special bottle*
*A metal needle is fitted in the lid, which is pressed into the opening of the bottle's dosing attachment when it is screwed on. This reliably prevents leakage, drying out and sticking of the opening. The dosing attachment allows a fine dosing of the adhesive.

Physical properties
Liquid state
Base Ethyl Cyanoacrylat
Colour clear
Specific Gravity (at 20 °C) 1.053~1.060
Refraction Index (n 20 D) 1.439
Flash Point (°C) >80 °C
Boiling Point (°C) 65/6mm Hg
Viscosity (cP) 3-5
Cured state
Colour clear
Specific Gravity (at 20 °C) 1.1~1.3
Processing temperature -55 - 80 °C
Refraction Index (n 20 D) 1.49
Dielectric Constant (bei 10 MHz) 3.5
Dielectric Loss (bei 10 MHz) 0.067
Soluble in Acetone, Dimethyl formamide,Nitromethame and Dimethyl sulfoxide.
Bond strength (Tensile shear strength, cured for 24 hours at 20-25 °C)
kg/cm²
Rigid PVC to rigid PVC 40-60
ABS to ABS 50-70
Polycarbonate to polycarbonate 80-120
Polystyrene to polystyrene 30-45
Natural rubber to natural rubber 5-9
Steel to steel 190-210
Stainless steel to stainless steel 200-220
Aluminum to aluminum 160-180
Copper to copper 150-170
Steel to rigid PVC 50-60
Stainless steel to neoprene 5-10
SBR to SBR 5-10
Cure speed
Seconds
ABS to ABS 4-5
Wood to wood 50-60
ABS to stainless steel 5-10
NBR to stainless steel 3-5
NBR to NBR 3-5
Stainless steel to stainless steel 3-5
ABS to NBR 3-5
Wood to ABS 5-10
Storage and shelf life:
Our superglue can be stored in a cool and dark place for about 1 year (for example in the refrigerator at + 5 °C).
At room temperature about 6 months. At temperatures above 20 °C the shelf life is further reduced (e. g. in the summer months)

temporarily out of stock

Reviews

Customers who bought this product also purchased

Sparkplug NGK CM6 temporarily out of stock	TYGON tubo 1 m Diam. 3.4 x 2.0 mm temporarily out of stock	Tygon tube 6.35 - 3.18 mm 1m temporarily out of stock
Propeller MENZ-S 23x8 temporarily out of stock	CA Glue (medium) 20g temporarily out of stock	Conector BEC male (10 pcs) temporarily out of stock

Quick Find

Shopping Cart

1 x	Carbon fiber rod 6.0 mmx1000 mm
1 x	Squared carbon wing joinner 5x5x220 mm
1 x	Carbon fiber rod 2.5 mmx1000 mm
1 x	Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x	Carbon fiber rod 5.0 mmx1000 mm
1 x	Carbon fiber rod 8.0 mmx1000 mm
1 x	Carbon fiber rod 3.0 mm x 1000 mm
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Carbon fiber rod 2.0 mmx1000 mm
1 x	Carbon fiber rod 20 mmx1000 mm
1 x	Carbon fiber rod 14 mmx1000 mm
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	Carbon fiber flat 1000x6.0x0.8 mm
1 x	Carbon fiber flat 1000x3.0x0.5 mm
1 x	Carbon fiber flat 1000x3.0x0.13 mm
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Carbon fiber rod 10 mm x 1000 mm
1 x	Carbon fiber rod 12 mm x 1000 mm
2 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x	Bungee HLG Premium
1 x	Vasa model Catapult
1 x
1 x	SE Ring 330 mm (4 pcs)
1 x	SE Ring 250 mm (2 pcs)
1 x	Marker ties (20 pcs)
1 x	Tape GFK 50 mm
3 x	SE Ring 360 mm (2 pcs)
1 x	Foil for sticking flaps and ailerons
1 x	Tape GFK 38 mm
1 x	Universal Colour Paste deep black 250 g
1 x	Solvent Plasti Dip 1000 ml
1 x	Medidor ángulos y/o incidencias
1 x	Angle measurer
1 x	Presto SF Light Filler styrene-free (420 g)
1 x	Spray YELLOW Inca Lexan 150ml
1 x	Plasti Dip Liquid Tape 429 ml orange
1 x	PARTALL® Hi-Temp Wax, 340 g
1 x	500 ml sealer (DOPE)
1 x	Surface Indicator Gauge Small
1 x	Angle of incidence meter
1 x
1 x	Truck-trailer for gliders 720 x 239 mm
1 x	Propeller balancer
1 x	Release wax 250ml
1 x	Spray adhesive AEROFIX 2
1 x	Nitroverdu 500 ml
2 x	Propeller balancer
1 x	Plasti Dip Liquid Tape 429 ml black
1 x	Universal Colour Paste signal white (RAL 9003) 1 Kg
1 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	Horn 6/20 with M3 Bearing
1 x	SlowFlyer control horn (3 pcs)
2 x	Carbon fiber rod 4.0 mmx1000 mm
1 x	1/6 Pilot "Tony"
1 x	1/7 Pilot "Japanese"
1 x	Pilot "Anthony" (Slimline)
1 x	ASH 31 Mi Scale:1/3 - 7m
1 x	ASH 31 6.08m Composite Hollow Molded
1 x	FANTASY ARF 3.2m
1 x	Fournier RF-4D
1 x	Albatros red/white (Top Model)
1 x	Aero-Master (Aero-naut)
1 x	GlassBubbles 2.5 g/cm³ Panda, tin (approx. 1 l)
1 x	Epoxy Resin L + Hardener CL (60 min) kit/ 930 g
1 x	Mould Resin P 10 kg
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	XICOY X45 rail
2 x	20x200 mm battery rings
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	ASPIRE Navy ARF 2.000 mm
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x
1 x	Electric Landing Gear ASPIRE (Elektron Retracts)
1 x	ASPIRE Red ARF 2.000 mm
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x	JEEMO Kit ARF Basic (2 color) - XTRALIGHT
1 x	Electric Landing Gear F9F COUGAR
1 x	MB-339 Aermachi 84" ARF c/retractil electric
1 x	SE Ring 350 mm (2 pcs)
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Ring 320 mm length (5 pcs)
1 x	F-16 Scale 1:6, Electric retract landing gear
1 x	MB-339 Aerofoam G2 "Italian Air Force Camu"
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	SE Ring 450 mm (2 pcs)
1 x	SE Ring 200 mm (2 pcs)
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	SE Ring 400 mm (2 pcs)
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m

20,742.63EUR