4.50EUR

Fibra de vidrio picada 3mm (200g)
[R2101001]

Fibra de vidrio picada 3mm (200g)

Fast, good wetting
Ideal for polyester resins due to the coating, well suited for epoxy resins

Technical data:
Fibre type: E-Glass
Shape in section: Round
Fibre coarseness: 9–14 µm
Length: 3 mm ± 5 mm
Specific gravity: 2.53–2.55 g/cm³
Resistance to dry heat: ca. 315 °C
Softening temperature: approx. 840 °C
Moisture content on delivery: max. 0.3 %
Colour: White
Surface treatment: Silane based 0.5–1.5 %

Resistance to light, to weather, to ageing = good
Acid resistance = good
Alkali resistance = limited
Solvent resistance = good
Swelling value in water = 0 %

Applications:
Fibre pastes and moulding compounds, synthetic plasters, putties, adheslves, corrosion protection coats, asbestos substitutes. In the case of coupling layers to fill and back up edges and embed alignment dowels and screw unions in mould construction, a mixture of 50 % vol. chopped glass fibre and 50 % vol. cotton flock is mostly used. The volume details are intended to assist in judging the amount supplied. These details refer to the loose bulk amount. The contents may become compressed during transport or storage

temporalmente fuera de stock

Comentarios

Búsqueda Rápida

Cesta de Compras

1 x	Fibra carbono tela 160g/m2 127 cm x 1 m
1 x	Cinta fibra de vidrio 225g / m² (Silane, liso) 40 mm, 100m
1 x	ARAMID panel nido de abeja 1300x2600x2 mm
1 x	Fibra carbono tela 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	AIREX® M060 lámina (amarilla) 1200x550x2,0 mm (20 pcs)
1 x	Fibra carbono tela 160g/m2 100 cm x 5 m
1 x	Cinta carbono TeXtreme 38 g/m2 IM UD 20mm x 100 m
1 x	Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x	Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x	Fibra carbono tela 160g/m2 100 cm x 2 m
1 x	Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Fibra carbono tela 160g/m2 100 cm x 3 m
1 x	Cinta de sellado al vacío, 2,5 x 12 mm (hasta 140 ° C) 15 m
1 x	Hélice POWER-PROP 13x9 Izda
1 x	DUPLEX 2.4EX Central Box 210
1 x	Hélice POWER-PROP 14x9 Izda
1 x	Helice APC 14x8.5 Electric Pusher
1 x	Conjunto de mandos arriostrados
1 x	Horn control flaps (1 pcs)
1 x	Acople ALU Izda. M3 Ø 4 (2 uds)
1 x	Horn aluminio pequeño azul (2pcs)
1 x	Horn con ball 55x40
1 x	Acople ALU M2,5 Ø 6 (2 uds)
1 x	Horn aluminio LH largo L31xH30 (2pcs)
2 x	Horn 16,5x20 mm (2 pcs)
1 x	Horn de mando 5/10 con rótula M2
1 x	Bayoneta: Fibra de vidrio/Carbono (26.5/25 x 25/23) x 1000 mm
1 x	Horn aluminio roscado 6 mm con rótula
1 x	Bayoneta aluminio/strongal D12 mm/0,5 m
1 x	Horn aluminio RH largo (2pcs)
1 x	Horn corto de latón M4 para cable (4 pcs)
1 x	Bayoneta: Fibra de vidrio/Carbono (13.7/12.5) x 1000 mm
1 x	Acople ALU Izda. M2,5 Ø 4 (2 uds)
1 x	Cable con accesorios
1 x	Horn de mando 6/27 con rótula M3
1 x	Horn aluminio pequeño amarillo (2pcs)
1 x	Horn de mando 5/15 con rótula M2
1 x	Horn 20x28,5 mm (2 pcs)
1 x	Horn aluminio pequeño rojo (2pcs)
1 x	Bayoneta aluminio ø30×1 mm x 1m
2 x	Horn 13,5x16 mm (2 pcs)
1 x	Horn de mando carbono 20 mm
1 x	Acople ALU M3 Ø 6 (2 uds)
1 x	Horn aluminio anodiazado 6 mm azul con rótula
1 x	Horn de mando 5/20 con rótula M2
1 x	Acople ALU M3 Ø 4 (2 uds)
1 x	Cierre cubiertas o carenados
1 x	Crimping sleeves para cables de 1.1 mm (10 pcs)
1 x	USBCOM 5i
1 x	Hélice POWER-PROP 14x9
1 x	Soporte filtro FESTO (4 pcs)
1 x	Soporte tubo Ø 6mm (10 pcs)
1 x	Soporte Angular conector XT-60 (2 pcs)
1 x	Soporte bomba Xicoy X45
1 x	Aro pasacable Ø25 mm (4 pcs)
1 x	Plancha PVC 320 x 194 x 0,23 mm (marrón)
1 x	Servo GO-1023MG 7.0 kg.cm 0.09s/60º
1 x	Sandwich carbon + poplar 2mm + carbon 480x290 mm
1 x	Sandwich carbon + poplar 2mm + carbon 290x160 mm
1 x	Sandwich carbon + poplar 3mm + carbon 290x160 mm
1 x	Servo NARO Max Std
1 x	Recambio lonas Hovercraft
1 x	Bateria arranque incl. compresor inflado
1 x	e-Looger V3
1 x	Cuña desmoldeo roja (5 pcs) [40x20mm]
1 x	Varilla carbono 1.5 mm x 2000 mm
1 x	Termo-retráctil rojo tubo de 2,4x1000 mm 2:1
1 x	Cable "Y" equilibrador 6S, 2x JST-XH / 1x JST-EH
1 x	Alambre cobre esmaltado 3 hilos trenzados rojo/negro/cobre Ø0,2
1 x	Device Terminal
1 x	Adaptador 5 LiPos XH>EH
1 x	Cable carga bateria transmisor Multiplex 2x0,5 qmm (50 cm)
1 x	Cable carga bateria transmisor Futaba 2x0,5 qmm (50 cm)
1 x	Alambre de cobre esmaltado en rojo Ø0,2 mm (5 m)
1 x	Cable BEC 30 cm (macho)
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	Bayoneta aluminio/strongal D35 mm/1 m
1 x	Sandwich carbon + poplar 4mm + carbon 290x160 mm
1 x	Motor OS 3820-1200 eléctrico
1 x	Horn mando long (2 pcs)
1 x	Acople ALU Izda. M2,5 Ø 3 (2 uds)
1 x	Acople ALU M2 Ø 3 (2 uds)
1 x	Horn largo de latón M2 para cable (2 pcs)
1 x	Acople ALU M2 Ø 4 (2 uds)
1 x	Reenvío de Profundidad 90x28 mm "tipo Kato"
1 x	Horn largo 50x26
1 x	Horn extra largo 60x30
1 x	Horn de mando corto ajustable con rodamiento

2,769.72EUR