5 x | Glases Nimbus |
4 x | Glases Nimbus "Black" |
5 x | Glases Flitemaster |
4 x | Glases Stratus |
6 x | Glases Ace |
5 x | 1/6 Pilot "John" |
6 x | Pilot "Duke" Legends Series (Slimline) |
7 x | Civilian pilot "G-Man" size 9cm (Slimline) |
5 x | Civilian pilot "Joe" size 9cm (Slimline) |
7 x | 1/12 Pilot "Cougar" |
3 x | Ply-Span 450x600/13g Red |
3 x | Oracover White 2 m |
3 x | Ply-Span 450x600/13g Blue |
2 x | Oracover CARBON Metalic 1 m |
3 x | Oracover Azul Cielo 2 m |
4 x | Oracover White 10 m |
2 x | Oracover Yellow CADMIO 2 m |
2 x | ORACOVER Ferrari red (2 m) |
4 x | Fox MDM 1 6000 mm |
5 x | LO 100 ARC 3.3m |
5 x | Ka-8b ELECTRIC 6000 mm ARF 1:2.5 (Phoenix Models) |
5 x | Swift S1 De-luxe 3.140 mm |
6 x | DISCUS 2A De Luxe 3.750 mm (Topmodel) |
4 x | Swift S1 De-luxe JEPPESEN 3.140 mm |
5 x | LS-8 GFK 6m Glider |
5 x | DG-303 ACRO 3750 mm, canopy |
3 x | Ventus 2cx 4.5 m |
4 x | LUNAK 4,00 m |
8 x | DG-303 ACRO 3750 mm, winglets |
7 x | ASK 21 6.5m + pylona |
6 x | Fox 4000 mm with flaps (Airwold) |
9 x | LO 100 ARC 3.3m,cabina |
12 x | Fournier RF-4D |
6 x | Swift S1 De-luxe 3.730 mm |
5 x | LO 100 Scale 1:2 - Modellbau Bruckmann |
5 x | Ventus 2cx 4.5 m Sapare Fuselaje |
7 x | LO 100 ARC 3.3m,frame canopy |
5 x | SAGITA Alsema 4.0 m |
7 x | Swift 5050 mm (Airwold) |
3 x | SHK 4000 mm Scale 1:4.25, V-Tails |
7 x | Kobuz 5000 mm (Airwold) |
6 x | Fox 4000 mm (Airwold) |
7 x | SOLOFOX 5m Voll-GfK |
9 x | Fox MDM 1 4000 mm DeLuxe |
7 x | Elevator VENTUS 2cx 4.5m |
6 x | ASW 20 5000 mm with winglets (Airwold) |
5 x | Gobe R-26S (Airwold) |
8 x | Set of buckles and strap, 1:4 scale. |
7 x | Fox MDM 1 4000 mm Std. |
7 x | DG-303 ACRO 3750 mm (Airworld) |
6 x | SHK 4000 mm Scale 1:4.25 |
5 x | Fox MDM 1 4000 mm DeLuxe,cabina |
5 x | ASW 15 5000 mm (Airwold) |
2 x | Spray adhesive AEROFIX 2 |
2 x | Nitroverdu 500 ml |
2 x | 20 g tin paste |
5 x | Silicone 0,25 qmm servos wire Graupner (100 m) |
2 x | Aluminium cap bolt washer M3 black (8 pcs) |
1 x | Aluminium cap bolt washer M4 green (8 pcs) |
2 x | Aluminium cap bolt washer M3 red (8 pcs) |
3 x | Aluminium wide washer M4 Red (4 pcs) |
2 x | Aluminium wide washer M3 gold (4 pcs) |
2 x | Quicklock washer 1.5 mm (10 pcs) |
2 x | Ferrita 17x10x6.5 mm |
3 x | Angle measurer |
2 x | Jeti Black cap |
2 x | ABS Strip 1.5x4.0x1000 mm |
5 x | 1/12 Pilot "Langley" |
2 x | Oracover Black 2 m |
2 x | 4 LiPo XH>EH adapter |
4 x | Straightened rod Ø 3.0 mm x 1000 mm |
3 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
5 x | 25 mm reinforced hinge |
4 x | 20x1000 mm Ring Strap Back To Back |
2 x | 12.7 mm 2:1 black termoretract tube |
3 x | Servo MKS 6100 DS |
2 x | Ball link M3 (6 uds) |
3 x | Medidor ángulos y/o incidencias |
3 x | 1,6x1000 mm 2:1 black termoretract tube |
2 x | Motor DLE 430 cc - Paramotors |
3 x | UBEC 6A KAVAN |
1 x | Pilot "Ice Man" (Slimline) |
1 x | Round Rod 1,5x1000 mm |
1 x | Servo JETI DSHV 3D13T (13 Kg) |
2 x | Short ball link M1.6 (6 uds) |
2 x | Spring lock washer 2.1 mm (20 pcs) |
2 x | Red aluminium servo arm V3-Futaba 1,25inch M3 |
3 x | Straightened rod Ø 1.5 mm x 1000 mm |
4 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
3 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
3 x | Paramotor Trike XL |
3 x | Tape GFK 25 mm |
4 x | Round Rod 1,25x1000 mm |
5 x | 1/12 Pilot "Tom" |
2 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
2 x | Servo SAVOX SA-1256 TG |
3 x | Round Rod 6,0x1000 mm |
2 x | Servo HITEC HS-5625 MG Digi |
2 x | Electric spoiler 440 mm (2 pcs) |
1 x | HITEC DPC-11 programmer |
3 x | 50 mm servo arm with bearing (2 pcs) |
1 x | SAVOX SH 0255 MG servo |
6 x | Ventus 2cx 4.5 m de Luxe |
3 x | Aluminium cap bolt washer M3 green (8 pcs) |
2 x | M2 5Diam short black ball link V2 (2 pcs) |
2 x | Cinta Goldfix 1m |
4 x | Circlik for shaft 1.9 mm (10 pcs) |
1 x | Socket head ball link M3 (2 uds) |
2 x | Brass ball links BS M3 V1 (10 pcs) |
2 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
2 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
2 x | Trike XL motor set (motor+esc+prop) |
2 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
2 x | Propeller balancer |
2 x | Servo HITEC HS-5485 HB Digi |
7 x | 1/10 Pilot "Jack" |
2 x | Dean "T" - Futaba Adapter |
2 x | Monokote PLATINO metalizado (1.8x0.65m) |
1 x | ALU servo arm 90º 3 mm shaft |
2 x | 800TVL CMOS camera for FPV |
3 x | 2,4x1000 mm 2:1 red termoretract tube |
2 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
6 x | Piloto Jet "Red" 1/6 Scale |
4 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
2 x | Savox Brushless Servo SC-1251 MG |
2 x | Blue metalic ball link M3/3 azul (2 pcs) |
2 x | Shirt Hispano Aviación |
1 x | Servo SAVOX SV-1270 TG |
3 x | 250 mm / 16 mm Airbrakes |
6 x | ASK 21 6.8m |
3 x | 1,2x1000 mm 2:1 black termoretract tube |
1 x | Socket head long ball link M3 (2 uds) |
3 x | Flat washer 2.7 mm (20 uds)pcs) |
2 x | Ball link M2,5 (10 pcs) |
2 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
3 x | Circlik for shaft 1.5 mm (10 pcs) |
3 x | Aluminium cap bolt washer M4 blue (8 pcs) |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
4 x | Civilian pilot "Curt" size 9cm (Slimline) |
2 x | Oracover Green10 m |
1 x | Glider Ka 7 Red (2540mm) |
4 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
3 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
2 x | Vest clothes Hispano Aviación |
2 x | M2/M1/6 3Diam short black ball link V1 (6 pcs) |
3 x | Aluminium wide washer M4 Blue (4 pcs) |
4 x | 1/6 Pilot "Tony" |
2 x | Monokote BLANCO jet (1.8x0.65m) |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
3 x | Angle of incidence meter |
1 x | Strip 1,5x1,5x330 mm |
2 x | Ferrita 27x14x7 mm |
1 x | Servo HITEC HS-55 |
1 x | Gates hinge |
4 x | 4,8x1000 mm 2:1 red termoretract tube |
3 x | Black copper lacquer wire Ø0,2 mm (5 m) |
3 x | X-RAY Micro QR (Tail Tube) |
1 x | Universal Colour Paste white 50 g |
2 x | MYLAR film A350 (1000x500 mm) |
3 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
3 x | Small aluminium horn gold (2pcs) |
1 x | Servo HITEC HS-125 MG |
4 x | Windsock Ozone L -1200 mm |
2 x | Big-Malibu XL Roof box with surfboard rack GREY |
3 x | Ferrita 14x8x5.5 mm |
4 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
3 x | Spikes Band (5 m) |
2 x | Ball link duraluminium M3 V1 (10 pcs) |
2 x | Blue aluminium servo arm V2-Hitec 1,25 inch M3 |
2 x | ABS I Strip 20x10x1000 mm |
2 x | JETImodel SINGLE BEC |
1 x | Blue aluminium servo arm V2-Hitec 1,0 inch M3 |
5 x | 1/10 Pilot "Jimmy" |
5 x | Pilot "Goose" (Slimline) |
3 x | Circlik for shaft 1.2 mm (10 pcs) |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
3 x | Long pinned hinge (12 uds) |
1 x | Surface Indicator Gauge Small |
3 x | Spring lock washer 4.1 mm (20 pcs) |
2 x | Kwik link AL M3 con Clip (2 pcs) |
10 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
4 x | Set cintas unión paracaídas 145 cm |
2 x | Ball link M3 RPA's-UAV's |
7 x | Pilot JAN 1/4 Saiplanes |
4 x | 1,6x1000 mm 2:1 red termoretract tube |
3 x | TP/TopFuel - XH 2/3S Adapter |
4 x | Quicklock washer 2.5 mm (10 pcs) |
3 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
2 x | Nylon hinge for flaps 33x9 (2 pcs) |
2 x | Servo HITEC D951 TW |
1 x | Savox Brushless Servo SC-1267 SG |
1 x | Red aluminium servo arm V2-Futaba 1,5" inch M3 |
3 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
7 x | Marker ties (20 pcs) |
2 x | M2/M1/6 3Diam short black ball link V1 (2 pcs) |
3 x | 6 mm ball link M3 (10 pcs) |
1 x | Servo HITEC HS-5645 MG Digi |
4 x | Pilot "Adolf" Legends Series (Slimline) |
2 x | Swift ARF 2000 mm Red (Hacker Model) |
5 x | Civilian pilot "Pamela" size 9cm (Slimline) |
6 x | X-RAY Micro QR (Elevator) |
7 x | 1/4 Pilot "Mike" |
1 x | Chili Race F3K (aramid nose) |
3 x | Quicklock washer 1 mm (10 pcs) |
3 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
2 x | Monokote ROJO misil (1.8x0.65m) |
3 x | Ball link M3 (10 pcs, flat ball) |
3 x | Opale Rucksack |
2 x | SE Ring 200 mm (2 pcs) |
3 x | ABS Strip 1.5x2.0x1000 mm |
1 x | VAGABOND 1500 mm ARF V2 (Red) |
3 x | Lock washer 4.3 mm (20 pcs) |
2 x | HPP-21 PLUS PC and Field Programmer for Hitec Digital Servos |
4 x | 6,4x1000 mm 2:1 blue termoretract tube |
2 x | Ring 320 mm length (5 pcs) |
7 x | 1/6 Pilot "Buddy" |
2 x | Blue aluminium servo arm V2-Hitec 1,75" inch M3 |
1 x | Super Light Wheels (Sponge Tyre) Ø 60mm x 19 mm (2pcs) axis Ø 3. |
1 x | Chili Race F3K 2 wing servo mounted(carbon biax) |
3 x | Tape GFK 38 mm |
4 x | LA500 nose |
1 x | Servo HITEC HS-7975 TG |
1 x | 22 mm Cut Disc Proxxon/Dremmel |
1 x | Blue aluminium double servo arm V3-Hitec 3,5inch |
3 x | Electric spoiler 250 mm (2 pcs) |
2 x | 2,4x1000 mm 2:1 green termoretract tube |
1 x | Chili F3K 2 wing servo mounted |
1 x | Servo HITEC HS-85 MG |
1 x | Wood servo holder (2 pcs) |
1 x | 89 mm double servo arm with bearing (2 pcs) |
2 x | Long ball link M2 (6 uds) |
1 x | DIVA cabin cruiser |
3 x | Aero-Master Cabine (Aero-naut) |
1 x | Servo HITEC HS-53 |
2 x | Servo HITEC HSB-9380TH |
2 x | Wheel 75 mm with electromagnet and brake disk (2 uds) |
3 x | X-RAY Micro QR (Rudder) |
2 x | LA500 pilot-seat set |
3 x | Nylon hinge 15x0,3 (10 pcs) |
3 x | Extension 6 lipos XH > EH |
2 x | Servo HITEC HS-45 HB |
1 x | Complet landing gear |
2 x | Blades 330mm |
2 x | Extension 2/3 lipos JST/C |
3 x | Red aluminium servo arm V1-Futaba 23 mm M2 |
3 x | 165 mm PVC transparent battery termo-retract 165 mm (1 m) |
1 x | Interruptor SAFET-SWITCH 12HV Twinbatt |
1 x | VIPER 1.7 Tailpipe + Fuel Tank 1500ml |
4 x | SE Ring 300 mm (2 pcs) |
1 x | Blue aluminium servo arm V3-Hitec 1,5inch M3 |
1 x | Rotor Mast |
2 x | Servo Bolt M3x8 (8 pcs) |
1 x | Blade holder center GFK 0,5 mm |
2 x | Long ball link M1.6 (6 uds) |
4 x | Red aluminium servo arm V1-Futaba 1,5" inch M3 |
1 x | 102x26 Ø6.0 mm aluminium core wheel |
2 x | Muffler DLE 20 |
2 x | DLE 30 complete electronic ignition |
2 x | Gold aluminium double servo arm JR/Graupner 40 mm M3 F3A |
3 x | ABS Strip 1.5x8.0x1000 mm |
1 x | Servo SAVOX SA-128S SG |
3 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
2 x | Servo Mount M (blue) |
2 x | M3 INDUSTRIAL ball link (2 uds) |
4 x | Electric spoiler 185 mm (2 pcs) |
1 x | 20 mm tail wheel for 0,5-1 Kg models |
1 x | BIG MOSNTER |
1 x | 69x25 mm (2.75") axle Ø4 mm aluminium core wheel |
3 x | Avia spare fouselage CF reinforced (Top Model) |
1 x | 165 mm PVC transparent battery termo-retract 165 mm (10 m) |
2 x | USB Mini Camera endoscope |
3 x | ABS Strip 1.0x5.0x1000 mm |
2 x | DLE 111 Carb gasket (V1) |
1 x | ALU-STAR Digi double servo arm |
3 x | 18 mm reinforced hinge |
3 x | Canopy Sweet / Siesta |
2 x | Silentblock DLE 170M |
2 x | Interruptor RX/Batterie |
8 x | Ion Pro, Wing joiner (JP Model) |
2 x | Raer wall |
2 x | 1,2x1000 mm 2:1 red termoretract tube |
2 x | Alu servo arm double RHINO |
4 x | Fascination 3600 mm, Canopy (Top Model) |
1 x | Servo HITEC D950 TW |
2 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | FEMA DEFLECTOR LEVER FOR WHEEL BRAKE, |
1 x | Angled clevis with threaded rod M3 |
3 x | Copper lacquer wire Ø0,2 mm (5 m) |
2 x | Blade holder lower |
4 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | Female connector for 10 pines AWG |
2 x | 1,5x50 mm allen screwdriver |
4 x | Nut M2 securing |
2 x | SATORI 2 PRO V C64 F5J |
3 x | Round Rod 2,5x1000 mm |
2 x | Servo HITEC HS-5085 MG Digi |
2 x | Servo HITEC HS-56 BB |
1 x | PS-050 TONEGAWA Servo |
5 x | SE Ring 450 mm (2 pcs) |
3 x | ALBATROS 3.0 m (orange/white) |
2 x | Ion Pro NG electric with flaps RED Fluor (JP Model) |
3 x | Aero-Master Fuselage (Aero-naut) |
4 x | Astra wing Joinner (Top Model) |
5 x | Servo RHINO pro SHV digi 4 |
6 x | Fascination 3600 mm, Spare Wings (Top Model) |
3 x | Fascination 3600 mm, Spare Elevator (Top Model) |
5 x | EASYGLIDER 4 RR |
2 x | Fascination 3600 mm (Top Model) |
7 x | Astra (Top Model) |
6 x | HERON RR |
2 x | Aero-Master (Aero-naut) |
4 x | Gracia (Top Model) |
2 x | Flip ARF (Top Model) |
1 x | Ion Pro NG electric with flaps GREEN Fluor (JP Model) |
2 x | Ion Pro, Fuselage (JP Model) |
1 x | IKURA 4.0 m |
2 x | ENIGMA ARF |
3 x | Albatros ,spare cockpit (Top Model) |
3 x | Albatros red/white (Top Model) |
2 x | Fascination 3600 mm ARC |
1 x | SIMtransmitter 6 Mode 2 |
3 x | Ion Pro NG electric with flaps ORANGE (JP Model) |
3 x | Navaho new design (Top Model) |
9 x | ACTIVE ARF Electric 1.995 mm |
3 x | Albatros ,spare fuselage (Top Model) |
2 x | Ka 8 B (Top Model) |
9 x | Ion Pro, Elevator (JP Model) |
5 x | MYSTIQUE 2.9 m ARF |
4 x | Aero-Master Wings (Aero-naut) |
2 x | Servo SAVOX SA-1258 TG |
3 x | Socket Screw M2x3 mm (4 pcs) |
3 x | Oracover Azul 2 m |
2 x | Red aluminium servo arm V2-Futaba 1,0" inch M3 |
3 x | Red copper lacquer wire Ø0,2 mm (5 m) |
2 x | Red aluminium servo arm V3-Futaba 3-3,5inch |
1 x | |
4 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
2 x | 3 blades set |
2 x | Avanti S 1.8m Jet FREECE TRICOLORI |
2 x | Hot Glue Stick RED |
2 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | Blade holder metal LAMA |
1 x | FOX ARF 2000 mm Red (Hacker Model) |
1 x | aluminium servo arm V2-JR 2,0 inch M3 |
3 x | HAWKER HUNTER 1:5,8 Desert (1.770mm) |
4 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
3 x | Avia (Top Model) |
6 x | Challenger ARF (Top Model) |
4 x | Ion Pro, Canopy (JP Model) |
5 x | Avia spare blue cockpit (Top Model) |
2 x | 40 mm servo arm with bearing (2 pcs) |
1 x | 3,9 mm ZG20-ZG38 servo arm |
1 x | 2,3 mm Prop Adapter M5 |
2 x | Extension 2/3 lipos JST - JST/C |
5 x | Glases Moritz |
2 x | Side rudder |
5 x | Joint with bearing M2 22x5,5 |
2 x | Servo HITEC HS-7955 TG Coreless Digi |
1 x | Sanyo RX Battery Eneloop RX 4,8 V Futaba |
1 x | Grafas ARF 3.0 m (Top Model) |
3 x | Flat washer 4.3 mm (20 pcs) |
3 x | Strip 2,0x2,0x330 mm |
1 x | Electric Landing Gear GS-200 ULTIMATUM 2.0 (Elektron Retracts) |
3 x | Circlik for shaft 2.3 mm (10 pcs) |
4 x | 105 mm PVC transparent battery termo-retract 68 mm (1 m) |
3 x | Servo HITEC HS-81 |
2 x | Aluminium wide washer M4 Black (4 pcs) |
3 x | Oracover Verde 2 m |
1 x | Rudder |
1 x | Sanyo Eneloop AA 1,2 V 2400 mAh battery |
5 x | 6,4x1000 mm 2:1 black termoretract tube |
2 x | DLE 55 Ignition unit |
3 x | M3 black washers (4 pcs) |
4 x | Spring lock washer 2.6 mm (20 pcs) |
3 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
6 x | Civilian pilot "Gramps" size 9cm (Slimline) |
2 x | Servo HITEC HS-635HB Carbonite |
2 x | Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | Female connector JST SH 1.0mm with 10 cm wire |
1 x | LiPo Storage Box Type "P" |
1 x | Dremel PERMAGRIT 18 mm round lime |
3 x | Fresa corte diamante Ø 2.3mm (bola) |
2 x | Flat washer 1.7 mm (20 pcs) |
5 x | MAX pilot ARTF |
1 x | 2,3 mm Prop Drive Günther M4 |
3 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
3 x | Small pinned hinge (6 uds) |
1 x | ASPIRE Red ARF 2.000 mm, Canopy |
2 x | Super Light Wheels(Sponge Tyre) Ø 50mm x 19mm (2pcs) axis Ø 3.5m |
2 x | Head core |
5 x | Tape GFK 50 mm |
3 x | Servo inverter |
3 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | Head lower part New |
2 x | Tank ULTIMATUM 2.0 (3.2 L) PRO |
2 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | Servo FUTABA BLS172 SV |
2 x | Strip 3,5x1,75x330 mm |
2 x | Dremel 3000 130W |
4 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | Motor Mount for TITAN ZG45 and ZG62, length 54 mm |
1 x | Red aluminium servo arm V2-Futaba 1,75" inch M3 |
1 x | Truck-trailer for gliders 720 x 285 mm |
2 x | E_brakes electronics |
1 x | Motor Mount for TITAN ZG45 and ZG62, length 36 mm |
2 x | SE Ring 250 mm (2 pcs) |
2 x | Gracia Maxi ARF (Top Model) |
2 x | 4,8x1000 mm 2:1 blue termoretract tube |
1 x | Female connector for 12 pines AWG |
1 x | Battery bed V2_M (black) |
1 x | Set transmisions ULTIMATUM 2.0 (stainless/aluminium) |
2 x | Cierva C30 simulated motor |
2 x | Ply-Span 450x600/13g Yellow |
4 x | Piloto Jet "Green" 1/6 Scale |
1 x | Electron 22 mm Fitting barb |
2 x | CC 02 |
1 x | 35x14 mm hard foam KOVO wheel (2 pcs) |
2 x | Parachute PV6 for F3J |
2 x | Antena FUTABA receptor Standard 2.4 GHz ( 200 mm aprox.) |
2 x | Motor wall |
1 x | Titanium M3x0,5x8 mm Flat Head screw (4 pcs) |
1 x | Switch Cap L (silver) |
2 x | Ply-Span 450x600/13g White |
1 x | 127x43 Ø6.0 mm aluminium core wheel |
1 x | EWC6 40 cm wing connector |
1 x | Xplorer1 anemometro |
3 x | 30 cm BEC cable (female) |
1 x | ER-40eVo Set A [2x ER40 + RB-45] |
1 x | Motor A20-20 L EVO |
1 x | Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor) |
1 x | 300 Newtons FEMA absorber |
2 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
2 x | Receiver Hitec OPTIMA 9 2.4 GHz AFHSS 9ch |
1 x | Blue aluminium servo arm V1-Hitec 1,5" inch M3 |
1 x | aluminium servo arm V1-JR 1,0 inch M2 |
3 x | Gold aluminium servo arm V2-JR 1,25" inch M3 |
2 x | Blue aluminium servo arm V3-Hitec 1,0inch M3 |
1 x | Bags de Luxe ODYSSEY |
1 x | Multi-adapter balancer JST/C - TP |
1 x | Muffler DLE-120 Right |
2 x | Avanti S Jet , Exhaust for JetCat P-140 (SebArt) |
2 x | Red aluminium servo arm V2-Futaba 1,25" inch M3 |
1 x | Electric Landing Gear ASPIRE (Elektron Retracts) |
2 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | 3,2 mm Prop Adapter M5 |
6 x | 1/6 Pilot "Garry" |
3 x | Sliding window 1:2,4 / 1.2,6 Scale |
1 x | Red aluminium double servo arm FUTABA 40 mm M3 F3A |
1 x | Gracia Maxi ARF, spare wings (Top Model) |
2 x | Ferrita con funda |
4 x | 6,4x1000 mm 2:1 green termoretract tube |
1 x | Flap hinge (6 pcs) |
2 x | Blade holder center |
1 x | Prop Shaft Adapter 6 mm/M8 "long" 35 mm |
1 x | LA500 rotor head core |
1 x | 3 mm Long Prop Adapter M5 |
1 x | Set Stickers Ultimatum 2.0 - Andy Folienwelt |
1 x | Socket Head Screw M2x12 |
1 x | ER-50eVo Set A [2x ER50 + RB-45] |
2 x | GROB G109 Elektro 2.770 mm |
2 x | Wheel Ø 75 mm (1 ud) Electron Retracts |
1 x | Piston DLE 55/111/22 |
1 x | Tail support (2 pcs) |
2 x | Actuator Electric 25 mm |
5 x | LA500 Blades |
2 x | Cabel charger transmitter GRAUPNER |
1 x | Wheel 18 mm |
2 x | DLE 111 pipe plug |
1 x | 60x25 mm tail wheel "type F3A" |
1 x | DH82 Tiger Moth ARC Scale 1:3.3 |
1 x | Prop shaft ZG 23SL and ZG 26SC |
2 x | 10 mm gas motor standoff |
2 x | Nut M2 |
3 x | Baering 3x8x4 |
2 x | Rotorshape Elevator |
3 x | Gates hinge 30x16 mm (2 pcs) |
3 x | Aluminium cap bolt washer M4 red (8 pcs) |
1 x | Servo HITEC HS-5125 MG Slim Metal Gear Wing Servo |
1 x | Transmitter Crystal 35 Mc/s Ch 77 |
2 x | Oracover Yellow CADMIO 10 m |
1 x | Servo HITEC HS-75BB Retract |
2 x | Lunak ARF 2000 mm Yellow (Hacker Model) |
2 x | F450/550 Quadcopter, landing gear |
1 x | Electric Landing Gear PC-21 Skymaster (Elektron Retracts) |
1 x | MPS Gas-Cap-Powerswitch |
1 x | Wheel keeper washer |
4 x | Balls 4 mm |
2 x | Rigid coupling brass Ø 2 mm L: 15 mm |
3 x | 76x23 Ø3.5 mm aluminium core wheel |
2 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
5 x | Strip ABS 2.0x10.0x1000 mm |
1 x | FesEx-Uni8 System |
1 x | Antenna FUTABA 2.4GHz 3PM/8FG/14SG/18SZ/18M |
1 x | Servo HS-5765MH High Voltage |
3 x | Gear set HITEC HS-125MG/5125MG |
2 x | 76 mm light wheels (2 pcs) |
1 x | Digital weight, angle and balance meter BASIC |
1 x | Superlight deluxe wheel 50 mm (2 pcs) |
3 x | 15 mm reinforced hinge |
2 x | Blue aluminium servo arm V1-Hitec 20 mm M2 |
1 x | ODYSSEY Blue ARF 2190 mm |
2 x | Prelude ARF 2500 mm, spare wing (TopModel) |
1 x | Selfstarr EME35 |
3 x | Servo HITEC HS-5685MH |
1 x | Servo HITEC HS-85 BB |
1 x | Servo MKS HV 777A+ |
2 x | Nut M1,6 |
2 x | Red aluminium servo arm V2-Futaba 17 mm iM2 |
3 x | Baal link 4/14/4 (5 pcs) |
3 x | Servo HITEC D625 MW |
2 x | PVC termo-retract battery 45 mm transparent orange (1 m) |
2 x | Siesta T tail (Topmodel) |
2 x | Grub screw M3x3 shouldered (2 pcs) |
5 x | Aramid 50 daN 50 m |
1 x | Switch Cap L (Red) |
2 x | Q-12 2000 mm Electric |
1 x | Switch Cap L (black) |
2 x | ESC XREG 80 Amp 2-6 LiPo BEC 5V/3A |
1 x | Cylinder gasket per 1 for ZG 74B/ZG 80B |
1 x | Servo HITEC HS-225 BB |
3 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
1 x | Futaba Radio Case |
1 x | 5 mm Prop Adapter M6 |
1 x | 75 mm spinner (Carbon Imitation) |
3 x | PVC yellow transparent battery termo-retract 68 mm (1 m) |
1 x | Carbon blade 3D 230 mm |
1 x | Quicklock washer 3.5 mm (10 pcs) |
3 x | Ply-Span 450x600/13g Orange |
2 x | |
1 x | VBar Control RX-Satellite |
2 x | Long ball link M3 (6 uds) |
1 x | Tank Kevlar ASPIRE 6 L Kero |
1 x | Gear set HITEC HS-55 |
2 x | Servo SAVOX SV-1260 MG |
1 x | Blue aluminium servo arm V1-Hitec 1,0" inch M2 |
1 x | JETImodel Addcap 1640 |
2 x | Foam wheel Ø 351 mm (2 pcs) |
2 x | Cylynder DLE 20-RA |
2 x | Wheel 115 mm with electromagnet and brake disk + E-Brake (2 uds) |
2 x | PVC transparent battery termo-retract 70 mm (10 m) |
1 x | Gear set HITEC HS-311/322/325BB |
2 x | Rudder 2_Tray 3~3.5 inch |
2 x | 22m Fitting barb |
1 x | Servo HITEC HS-325 BB |
1 x | PVC yellow battery termo-retract 69 mm (10 m) |
3 x | Threaded insert M5 (10 pcs) |
1 x | Motor OS MAX 160 AX |
1 x | 28x10 BIELA propeller |
1 x | Propeller POWER-PROP 14x10 |
2 x | Poerfly |
1 x | Ball joint long |
3 x | Small flex hinge (12 uds) |
1 x | Servo HITEC HS-7954 SH Digital High |
1 x | Mudguard wheels 112/127 mm |
1 x | Electric Landing Gear ODYSSEY (Elektron Retracts) |
2 x | 37 mm PVC transparent battery termo-retract (1 m) |
1 x | Battery bed V2_S (black) |
2 x | Head upper part |
2 x | Fuselage Autogyro RAINBOW |
2 x | Motor DLE 170 M- Paramotors |
2 x | Head runner |
1 x | OS Engine 105HZ-R Heli |
2 x | Electric Landing Gear "Black Edition" BULL Mo1 2.6 (Elektron Re |
4 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | Crystal TX 35.150 Ch 75 |
4 x | Rudder 2_Tray 4.5~5 inch |
1 x | Telemetry interface ALTIS 6 cm |
2 x | PVC transparent battery termo-retract 195 mm (1 m) |
2 x | BAE HAWK Mini 1.29m RED ARROW ARF +elec.L.Gear + 3 Microservos |
4 x | Head lower part |
1 x | Servo Fork |
5 x | SE Ring 350 mm (2 pcs) |
3 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Lightweight aircraft wheel, 45x18.5x2 |
2 x | 32x9 mm foam standar KOVO wheel (2 pcs) |
3 x | Oracover Brown 2 m |
1 x | Servo HITEC HS-65 HB |
1 x | Tail tube RAINBOW |
2 x | Actuator Electric 25 mm HIGH TORQUE |
2 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
1 x | Landing gear axle Ø 4 mm (2 uds) |
1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg |
2 x | ORACOVER transparent Yellow (10 m) |
1 x | SunCover 2.2 Class (SebART) |
2 x | Servo HS-5070 MH Hi Volt |
2 x | Rudder 2_Tray 4~4.5 inch |
2 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
2 x | 200 Newtons FEMA absorber |
1 x | Servo HS-7980TH digi high voltage ultra torque |
2 x | Aluminium cap bolt washer M3 blue (8 pcs) |
1 x | Double aluminium servo arm V1-Hitec 2,5 inch M3 (blue) |
1 x | Spinner 102 mm |
3 x | LA500 tail empennage |
1 x | Race 400 7,2 V |
4 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | THERMIK XL 4000 mm |
4 x | SE Ring HACKER 300 mm (2 pcs) |
2 x | Parachute BACKUP X100 |
5 x | LUCAS pilot ARTF |
1 x | BULL MØ1 2.600mm (mono color) |
1 x | Servo HITEC HS-5475 HB Digi |
3 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
1 x | Superlight deluxe wheel 56 mm (2 pcs) |
3 x | Dumper propeller 6/8 mm |
1 x | ALMIRALSANKER anchor 40 mm (2 uds) |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel) |
1 x | Coversion set HIROBO EX/EAGLE elektro |
1 x | Male connector for 20 pines AWG |
3 x | Oratex White 2m |
1 x | Washer 2.2×4 |
1 x | Starter Sullivan-STAR 603 DINATRON |
1 x | SSPS105 Super Hi-Power servo |
3 x | Brass control horn M4 short for wire (4 pcs) |
4 x | Wing OXY 5,0 m2 |
1 x | Female connector for 20 pines AWG |
1 x | USB Interface REVOLECTRIX for CellPRO 10s |
1 x | Gear set HITEC HS-81 |
2 x | 101x28 mm (4.0") Type jets aluminium core wheel |
1 x | Set transmisions ULTIMATUM 2.0 (dura/aluminium) |
2 x | Prolonguer for Balancer Thunder Power 6S |
1 x | Propeller MENZ-S 26x10 |
2 x | 100x50 mm SLH KOVO wheel |
3 x | PVC transparent battery termo-retract 51 mm (1 m) |
1 x | Propeller electric carbon 8.5x5 |
1 x | Compact on-board starting system (9713) |
2 x | Avanti S 1.8m Jet White/Blue |
1 x | Blue aluminium servo arm V3-Hitec 1,25inch M3 |
3 x | Windsock Ozone L - 700 mm |
1 x | Servo Mount S (red) |
1 x | RB-45 Electronic |
4 x | LA500 pre-rotation gear |
2 x | EWC3 100 cm wing connector |
1 x | Liferaft 47 mm |
2 x | LA500 housing-lower cyclic |
1 x | M3-M4 rubber washer (8 pcs) |
2 x | 4 blades set |
1 x | Wheel collar 2 mm Ø (4 uds) |
1 x | Jet wheels 65 mm E-brake 4 mm shaft |
1 x | Shaft sleeve LAMA |
1 x | Aluminium wide washer M3 red (4 pcs) |
1 x | Recess mount-rem. glow plug set |
2 x | Set wings Mini AVANTI S 1.4m W/B/R |
3 x | Blade holder upper |
1 x | LiPo Storage Box Type "BIG" |
1 x | Blade Holder (3 blades) |
2 x | Blue Aluminium double servo arm V3-Hitec 3-3,5inch |
1 x | Chopped glass fibre strands 3 mm |
1 x | Servo HITEC HS-45 HB, servo box |
1 x | Servo HITEC HS-645 MG |
2 x | Wheel FEMA 100 mm / 6 mm |
3 x | Glases Aspen |
1 x | Premiant II (Aero-naut) |
1 x | Screw M3x16 |
4 x | Motor rotor LA-500 |
1 x | Futaba S-Bus Rx/Gyro Link Lead |
1 x | Servo Digital HITEC HS-5065 MG |
1 x | BlueCom™ Adapter (Android / WP) |
1 x | wing/fuselage connector for 16 pines AWG 20-24 |
3 x | Paramotor BackPack XXS (without accessories) |
1 x | Antenna Hole Cap V1 (Silver) |
2 x | BEC 3A FOXY |
1 x | Fixing Ring with Base 60 mm |
2 x | Quick hose connector 6-4 mm |
2 x | Red aluminium servo arm V1-Futaba 1,25" inch M3 |
1 x | Cierva C30 spanish decoration Stickers |
1 x | Motor Mega AC 16/10/03 RACE |
5 x | Opto Gas Engine Kill Switch |
2 x | ABS Strip 1.5x3.0x1000 mm |
1 x | Super Light Wheels(Sponge Tyre) Ø 65mm x 19mm (2pcs) axis Ø 3.5m |
1 x | Gasket, cylinder ZG 20 |
3 x | Socket head ball link M3 (2 uds) |
1 x | Neoprene tube 7,5x3,5 mm (1 m) |
1 x | Servo HITEC HS-5585MH |
2 x | Servo HS-5565MH High Voltage |
4 x | X-RAY Micro QR (Fuselage with canopy) |
2 x | Mini AVANTI S Jet , L.Gear Electric (SebArt) |
2 x | Motor Mega AC 16/15/05 CE F5J |
2 x | Electric spoiler 300 mm (2 pcs) |
2 x | Digital scale up to 40 kg |
2 x | Prelude ARF 2500 mm (TopModel) |
1 x | PowerBox Spare part magnetic sensor |
2 x | Servo HITEC HS-225 MG |
5 x | 1/12 Pilot "Fighter" |
1 x | Absorver mount set for 5-10 Kg models |
1 x | Gold aluminium servo arm V2-JR 1,5" inch M3 |
1 x | Electric Landing Gear "Black Edition" BULL Mo1 2.6 GS200 (Electr |
1 x | Tank ULTIMATUM 2.0 (3.2 L) + Smoke (0.9 L) PRO |
1 x | bavarianDEMON USB cable |
4 x | Quicklock washer 4 mm (10 pcs) |
1 x | Kevlar tank ULTIMATUM 2.0 (3.0 l) |
1 x | Blade Holder Full (3 blades) |
1 x | 7 Servo SET 9g DS MG + Full servo extension cable set for Avanti |
1 x | TARANIS X9D - plus EU/LBT FrSky complete set w. travel case incl |
1 x | XENON RC (Aero-naut) |
2 x | Motor Mega AC 22/20/03 |
1 x | Savox Brushless Servo SB-2271SG |
1 x | Cylinder ZG 26SC/SLH |
1 x | Sanyo RX Battery Eneloop 6,0 V JR |
1 x | Stainless Steel Bend D 20x0,6mm |
2 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
1 x | Transmitter Stick Ends V5 Red - M4 JR/DX7 |
1 x | MOKI S250 Intake Bend |
2 x | wing/fuselage connector for 12 pines AWG 20-24 |
1 x | Screw M4x12 (10 pcs) |
3 x | Aluminum Bayonet / strongal D25 mm / 1 m |
1 x | Servo Bolt M3x6 (8 pcs) |
2 x | SWTU2 switch |
1 x | Glass Bubbles 0.19 g/cm³ Panda, tin/ 120 g (approx. 1 l) |
1 x | ODYSSEY CUST ARF 2190 mm |
1 x | Compact on-board starting system (9724) |
2 x | EWC3 40 cm wing connector |
2 x | SBEC Jeti |
1 x | 64x20 mm (2.5") Type jets aluminium core wheel |
1 x | Bearing housing |
1 x | Aluminium ignition bad (blue) |
2 x | Q-12 X-light 2000 mm Electric |
1 x | Carbon blade 230 mm |
2 x | SIG Coverall 1.2x0.9 m |
2 x | ER-40eVo Set B [Complet Set + GS200] |
1 x | 150 mm inflatable superlight deluxe wheel (2 pcs) |
2 x | Tray for FUTABA 18 SZ |
1 x | Single rim type C3 36/33,5/18,5 mm (pneumatics 55-70 mm) |
1 x | Molinete / Cabestrante amarre Scale 1:32 |
1 x | 45x9 mm foam special light KOVO wheel with radius (2 pcs) |
2 x | Gear set HITEC HS-65 HB |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg |
2 x | Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | Flex-headers for Valach VM 85B2-FS |
1 x | Bearings for motor HACKER C50 |
2 x | ASPIRE Red ARF 2.000 mm |
3 x | Esc MasterBasic 70SB |
2 x | Silent-blocks DLE 170M |
2 x | Ply-Span 450x600/13g Black |
1 x | Propeller diller 5/6,3/8/9 |
1 x | Charger FUTABA SQN30W12P-08 220v |
1 x | 45x19 mm hard foam KOVO wheel (2 pcs) |
1 x | 80x40 mm hard foam KOVO wheel |
1 x | Muffler for Titan ZG 26SC/EI |
2 x | Battery plate |
1 x | SAVOX SH 0254 servo |
1 x | Avanti S 1.8m Jet FREECE TRICOLORI + Landing gear |
3 x | Transmitter Crystal 35 Mc/s Ch 62 |
1 x | Aluminium Motor Mount ZG23SL/H/M and ZG26SC/SCM, ZG231SLH |
1 x | Aluminium ignition bad (red) |
1 x | Retract Landing gear ER40 Combo Xcalibur complete |
1 x | Red aluminium servo arm V1-Futaba 20 mm M2 |
1 x | Charger HITEC CG-42 TX 7.2v/ RX 4.8v (80 mA) |
1 x | Avanti S Jet, Kerosene+Smoke Tank(SebART) |
2 x | Pilot LA 500 |
1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
3 x | 4,8x1000 mm 2:1 black termoretract tube |
1 x | Wheel 22 mm |
2 x | Three-position switched channel, short |
1 x | Sandpaper file 13 mm |
1 x | Wheel 28 mm |
1 x | Electric Landing Gear AVANTI XS (Elektron Retracts) |
1 x | PVC transparent red battery termo-retract 68 mm (10 m) |
1 x | Propeller APC 9x4.5 Electric Pusher |
1 x | Servo HITEC HS-5245 MG Digi |
1 x | 76x24 mm (3.0") Type jets aluminium core wheel |
1 x | SBEC 40 |
1 x | Propeller electric carbon 9.5x6 |
1 x | Propeller APC 22x12 WE Electric |
1 x | Red aluminium double servo arm FUTABA 2,5inch M3 |
1 x | Bags de Luxe ULTIMATUM 2.0 |
3 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Motor Mega AC 16/15/03 |
1 x | Gear set HITEC HS-645MG/5645MG/5685MH |
2 x | LA500 housing-upper cyclic |
1 x | Super Light Wheels(Sponge Tyre) Ø 60mm x 21mm (2pcs) axis Ø 4.0m |
1 x | Wheel collar 4 mm Ø (4 uds) |
1 x | Epoxy MID-CURE™ 15 min (130g) |
1 x | Battery LiPo GENS 450 mAh 2S 7.4V 25C (Gens Ace) |
1 x | BlueCom™ Adapter (iOS) |
1 x | VIPER 1.7 Electric break wheels + structure |
2 x | HPP-25 PLUS PC Programmer for Hitec Digital Servos Field Program |
2 x | 170x54 mm SLH KOVO wheel with bearing and metal hub |
1 x | PU aircraft tyre, 45x16x3 mm |
2 x | USB HLS prog. interface |
3 x | SE Ring 330 mm (4 pcs) |
1 x | Ø 28 mm fiberglass motor-holder for electric motors |
2 x | Small Crow DLE-170M |
1 x | Gear set HITEC HS-56 HB |
6 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
3 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Mould Resin P + Hardener EPH 161-P, kit/ 585 g |
4 x | Teacher-student connector T12FG/FX-30 |
1 x | SERVO DES 806 Pignons |
1 x | A/C quality beech plywood 600x300x0.6 mm |
1 x | Bearing ZZ 6x16x5 for AXI 5330/xx |
1 x | Superlight deluxe wheel 45 mm (2 pcs) |
1 x | Device Terminal |
2 x | resin-hardener package L-385 with hardener H-385 (875 g) |
1 x | Male connector JST SH 1.0mm with 10 cm wire |
3 x | Tapping Screw M2.9x13 (10 pcs) |
1 x | Keypad ALTIS V4 |
1 x | Propeller APC 12x4.5 MR |
2 x | Crystal RX 35.120 Ch 72 |
1 x | Epoxy Resin L (2.5 Kg) |
1 x | Anchor of tow Met. 60 mm |
2 x | ABS Strip 1.0x2.0x1000 mm |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | SensorSwitch, red connector wit 200cm ribbon cable |
2 x | Oracover Orange 2 m |
2 x | Para-RC "RC-Evo-Cross" Rescue |
4 x | Beech dowels 2.0 x 1000 mm |
1 x | 5 mm Prop Adapter M8 |
2 x | Female connector for 16 pines AWG |
4 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
2 x | Z Bender - S Type Tool |
1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | Gear set HITEC HS-85 |
1 x | Propeller APC 10x4.5 MR |
1 x | Motor Mega AC 22/30/02 |
1 x | Propeller POWER-PROP 10x7 Izda |
1 x | Contest-S-Pult-Carbon mc-20/mc-24 |
1 x | Glow filter |
2 x | Crystal Universal RX 35.050 Ch 65 |
5 x | 1/7 Pilot "Japanese" |
1 x | Turbine MAMMOTH 25.4 Kg |
1 x | Motor Mega AC 16/15/04 |
3 x | Extension 5 lipos JST/C |
1 x | Super Light Wheels(Sponge Tyre) Ø 55mm x 19mm (2pcs) axis Ø 3.5m |
1 x | Receiver replacement antenna, approx. 85 |
2 x | ABS Strip 1.0x4.0x1000 mm |
2 x | Neck strap JETI DS |
2 x | PSC 5 |
1 x | Prop Shaft Adapter 5 mm "long" |
1 x | 10 mm aluminium spinner (Kavan) |
2 x | Tapping Screw M2.2x13 (10 pcs) |
1 x | Carburettor and crankcase nipple for ZG45SL, ZG62/S/SL and ZG74B |
1 x | Servo HITEC HS-311 |
1 x | SLICK 360-B 104" (2640 mm) |
1 x | MULTIPLEX ALUMINUM CASE "M-LINK" |
1 x | Gear set HITEC HS-225 |
1 x | Electromagnets brake |
1 x | 8 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | FPV Station for SE TX-Tray V1 |
2 x | Switch Nutspanner for JETI Duplex Transmitter DC / DS |
1 x | Set Micro-horns HS-60/81/85 |
2 x | Heat-conducting adhesive (2x2ml), WLK DK 4 |
1 x | SERVO DES 806 Pignons |
1 x | DPS Switch JR/JR |
1 x | Rubber wheel Ø 50mm x 18mm (2pcs) axis Ø 2.6mm |
1 x | Steel Screw M1x8 (10 pcs) |
1 x | GRAFAS MAXI ARF |
1 x | Bearings for motors hacker A50 |
1 x | Reed valve petal for DLE 120 |
2 x | Propeller APC 11x4.7 SF Pusher |
1 x | resin-hardener L-385 H-385 (625 g) |
3 x | SE Ring 360 mm (2 pcs) |
1 x | 120x60 mm C SLH KOVO wheel |
1 x | Gasket set DLE-55 |
1 x | Motor Mega AC 16/07/08 |
2 x | Ignition for ZG motors |
1 x | Anchor 50 mm (2 uds) |
1 x | Propeller APC 5.5x4.5 |
1 x | Aluminium Hub for folding Props 37 mm M8 Shaft 5 mm |
1 x | Aluminium Hub for folding Props 55 mm M8 Shaft 6 mm |
2 x | Crystal Universal RX 35.140 Ch 74 |
1 x | Male connector for 16 pines AWG |
1 x | MAULE M-7-420 2.8m Red |
1 x | Propeller Pleg CAM-Prop 8x6 |
2 x | Crystal Universal RX 35.070 Ch 67 |
1 x | RCEXL Electronic ignition twin A-02 |
1 x | Propeller APC 7x5 Electric |
1 x | Servo MKS 6100 DS |
1 x | 43x14 mm hard foam KOVO wheel (2 pcs) |
2 x | Brass rod Ø 1.0 mm x 1000 mm |
1 x | Compact on-board starting system (9512) |
1 x | Servo HITEC D645 MW |
3 x | HAWKER HUNTER 1:5,8, Electric retract landing gear |
2 x | 10cm Flexible Stainless Steel Exhaust Tubing D=25mm |
2 x | |
1 x | Plastic wheels 30 mm (2 pcs) |
1 x | Antena FUTABA receptor Standard 2.4 GHz ( 160 mm aprox.) |
1 x | 20 mm gas motor standoff |
1 x | Propeller APC 12x6 Electric Pusher |
1 x | XPower H PROP HUB Ø6.0/42.5mm 0º |
1 x | Retract electric landing gear 90 - Viper |
1 x | Avanti S 1.8m Jet White/Blue + Landing gear |
1 x | Turbo Prop KS |
1 x | Head spacer |
2 x | Propeller CFK 12X6 |
1 x | Switch Cap L (Blue) |
1 x | Mini AVANTI S Jet , Carrying bags (SebArt) |
2 x | 3,0x60 mm allen screwdriver |
1 x | Propeller POWER-PROP 11x6 |
2 x | ZENOAH ZG26 SCM Marine Engine |
3 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
1 x | 15 mm floating pad (30 pcs) |
1 x | Aluminium wide washer M4 Gold (4 pcs) |
2 x | 58 mm micro servo cover |
3 x | 6 mm aluminium horn with patella |
3 x | Silicone 0,50 qmm servos wire Graupner(100 m) |
3 x | Silicone black 0,5 qmm wire ( 25 m) |
2 x | Silicone black 0,75 qmm cable ( 1 m) |
2 x | Straightened rod Ø 2.0 mm x 1000 mm |
1 x | Silicone black 0,75 qmm wire ( 25 m) |
2 x | Straightened threaded rod M3 - 1m |
3 x | Silicone red 0,25 mm² wire (25 m) |
3 x | White silicone 0,25 qmm wire (100 m) |
1 x | Straightened rod Ø 4.5 mm x 1000 mm |
4 x | Silicone red 0,75 qmm wire ( 25 m) |
2 x | Silicone red 0,75 qmm wire ( 1 m) |
2 x | Straightened rod Ø 6.0 mm x 1000 mm |
3 x | Silicone 0,35 qmm servos wire Futaba (100 m) |
2 x | Green silicone 0,25 mm² wire (25 m) |
2 x | Blue silicone 0,5 qmm wire (50 m) |
2 x | PVC 0,08 qmm Futaba servos wire (5 m) |
3 x | Silicone 0,25 qmm servos wire Graupner (5 m) |
3 x | Silicone 0,35 qmm servos wire Graupner(100 m) |
1 x | Brass rod Ø 0.5 mm x 1000 mm |
3 x | Silicone red 0,5 qmm wire ( 1 m) |
2 x | Straightened rod Ø 5.5 mm x 1000 mm |
5 x | 1 m servo "Premium" wire (white/red/blue) |
2 x | Straightened rod Ø 4.0 mm x 1000 mm |
2 x | Cabel PVC 2 x 0.25 mm2 (5 m) red-black |
5 x | Silicone 0,14 qmm servos wire Graupner (5 m) |
4 x | 5 line servos wire black (1 m) |
3 x | Cable Cargador FUTABA |
3 x | PVC 0,14 qmm servos wire Graupner (100 m) |
3 x | Green silicone 0,25 qmm wire (50 m) |
2 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
4 x | PVC 0,08 qmm Graupner servos wire (5 m) |
2 x | Yellow silicone 0,5 qmm wire (50 m) |
2 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
2 x | JR silicone servo wire 0,35 qmm / 5m |
3 x | PVC 0,14 qmm servo wire Futaba (5 m) |
1 x | Straightened rod Ø 2.5 mm x 1000 mm |
1 x | White silicone 0,25 qmm wire (150 m) |
2 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
4 x | PVC 0,14 qmm servos wire Hitec/Mpx (5 m) |
3 x | PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m) |
4 x | PVC 0,14 qmm servos wire JR/Graupner (5 m) |
2 x | Brass rod Ø 0.8 mm x 1000 mm |
2 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | Silicone black 0,5 qmm wire ( 1 m) |
2 x | White silicone 0,25 mm² wire (25 m) |
2 x | Silicone 0,50 qmm servos wire Graupner(5 m) |
2 x | Straightened threaded rod M2-1m |
2 x | Straightened rod Ø 0.5 mm x 1000 mm |
3 x | Silicone red 0,5 qmm wire ( 25 m) |
2 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
2 x | Black silicone 0,25 mm² wire (25 m) |
1 x | Straightened rod Ø 5.0 mm x 1000 mm |
3 x | Silicone 0,14 qmm servos wire Graupner (100 m) |
2 x | Silicone 0,50 qmm servos wire Futaba (100 m) |
5 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | Carbon fiber flat 1000x3.0x0.13 mm |
2 x | 6 mm M3 variable inclined horn |
1 x | Profile ABS Square 3 x 1000 mm |
1 x | 90x60 mm standart servo cover |
1 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
2 x | Mahogany wood slat 1.5x1.5x1000 mm |
2 x | Hot Glue Stick BLACK |
1 x | Balsa panel 2.5x100x1000 mm |
3 x | CM-3 |
1 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
1 x | Vasa model Catapult |
1 x | EC5-Set female, simple quality, 2 x female pin, 1 x blue housing |
1 x | Pegasus 2050 mm F4J (Top Model) |
1 x | Wing tips support for AX-18/AX-60 (2 pcs) |
1 x | DYMOND VTX UBS Programming adapter |
1 x | B4-0 rocket charges (6 pcs) |
3 x | Extension silicon 30 cm male (Futaba) |
2 x | Horn 6/35 with M3 Bearing |
3 x | 10 mm floating pad (72 pcs) |
2 x | Beech dowels 3.0 x 1000 mm |
1 x | 50x45 mm micro-mini servo cover |
1 x | M3 Maxi ball link (2 uds) |
1 x | ABS angle 6,0x6,0x1000 mm |
2 x | Lock washer 2.7 mm (20 pcs) |
2 x | ABS 500 x 400 x 1,5 mm (white) |
1 x | 90 mm rods + T patellas set for direction control |
4 x | Long pinned hinge (6 uds) |
3 x | Carbon fiber rod 6.0 mmx1000 mm |
2 x | Cockpit aluminium closing |
1 x | Conector JR/Uni Servo male BLUE silicon (10 pcs) |
1 x | PC-6 Pilatus Porter Big "Fredi" (PICHLER) |
1 x | Canopy Astra |
1 x | ORACOVER Fluor red (2 m) |
1 x | ABS tube 16.0x14.0x1000 mm |
1 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
1 x | Extension silicon 100 cm (Futaba) |
3 x | Profile ABS half cane 2.5x1000 mm |
2 x | Connectors banna oro 8,0 mm (M/F) |
1 x | Carbon fiber rod 5.0 mmx1000 mm |
1 x | XT-30 connector (pair) |
1 x | 135 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | Ball link M1.6 (6 uds) |
2 x | Prolongador S-Bus JR/JR 10cm |
2 x | Extension silicon 30 cm male (Graupner) |
1 x | SUPER DIMONA TC-80 |
1 x | Pine wood slat 10x10x1000 mm |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | Red smoke canister 100 g |
2 x | Plasti Dip Liquid Tape 429 ml black |
1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs) |
1 x | ABS tube 3.0x1.0x1000 mm |
1 x | Connectors banna oro 3,5 mm (M/F) |
2 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
2 x | Disposable Injector Bags (30x16cm) 100 pcs |
1 x | BALSA trip 4.0x4.0x1000 mm |
2 x | MPX-Dean "T" Adapter |
2 x | 6 mm Quick clamp_S (10 pcs) |
1 x | Optotronix Aurora Plug |
3 x | Surprise XII Horizontal Estabilizer (Freudenthaler) |
2 x | ABS tube 18.0x16.0x1000 mm |
2 x | Cabling for Fox MDM1 wings |
1 x | Cable tie mounts 4.3 (4 uds) |
1 x | Plasti Dip Liquid Tape 429 ml orange |
3 x | L-Connector 1.0 mm x 1000 mm |
3 x | ABS Strip 1.0x3.0x1000 mm |
2 x | Wing OXY 0,5 pulgadas2 |
3 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
2 x | Carbon fiber flat 1000x6.0x0.8 mm |
1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | ABS tube 6.0x4.0x1000 mm |
1 x | PVC yellow-orange transparent battery termo-retract 57 mm (1 m) |
1 x | Silicone black 6,0 qmm wire (25 m) |
1 x | Starter EM Gear Power 250 |
1 x | White smoke canister 100 g |
1 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
1 x | Bidule 55 2460 mm Cabina |
2 x | Indoor hinge with servo arm integraded |
1 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
1 x | 11 mm Rubber pads (14 pcs) |
1 x | ABS "T" angle 8.0x8.0x1000 mm |
5 x | Pilot "Anthony" (Slimline) |
2 x | Balsa panel 10x100x1000 mm |
3 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
2 x | Extension silicon 10 cm (Graupner) |
1 x | Intairco CMB Super Filter - 4mm Barb |
3 x | APM2.6 Power module with 5.3V DC BEC |
1 x | Double conector with JR adapter and 200 mm extension |
1 x | Profile ABS triangular 6.0x1000 mm 90º |
1 x | 3 LiPo XH>EH adapter |
4 x | Zurich Sport Sunglasse Dark Sensity BROWN Glasses |
2 x | CF tube (L 1000 mm Ø030 mm, Ø26 mm) |
1 x | Balsa panel 5.0x100x1000 mm |
1 x | Solarfilm Lite blue transp. 5m |
2 x | Stickers-digit for marking |
1 x | Silicon red 1,0 qmm cable ( 25 m) |
1 x | 28x5 mm wires output (2 pcs) |
2 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
2 x | 6,4x1000 mm 2:1 red termoretract tube |
2 x | Blind nut M3 (4 pcs) |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Carbon fibre sandwich sheet 350x150x3 mm |
1 x | Starter Sullivan-STAR 601 |
1 x | Remolcador "Jonny Hafenschlepper" |
2 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
2 x | CC 01 |
1 x | Carbon fiber rod 12 mm x 1000 mm |
3 x | Horn with ball 55x40 |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
2 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
2 x | Kwik link with arm M3xM2xL24 |
1 x | XT-90 connector (pair) |
1 x | ABS tube 10.0x8.0x1000 mm |
1 x | Cable grommet Ø 3.2 mm (4 uds) |
2 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
4 x | Ball link M3 (10 pcs) |
2 x | Glider STROLCH |
1 x | ABS 500 x 400 x 1 mm (white) |
1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
2 x | Gates hinge aluminium (1 pcs) |
1 x | Medium pin type hinge (12 uds) |
2 x | Parachute P4 |
2 x | Extension silicon 35 cm male (Futaba) |
1 x | 2 mm female connector (2 pcs) with safety connector |
1 x | Extension silicon 75 cm (Futaba) |
1 x | M2,5 5Diam black ball link V2 (2 pcs) |
1 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
1 x | Spannlack 1000 ml |
1 x | Fresa corte diamante Ø 2.35mm (flame) |
1 x | Smoke set "S" |
1 x | SE Ring 400 mm (2 pcs) |
1 x | TrainerCord (master-learner) |
3 x | 20 mm carbon horn |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | 2,0x50 mm allen screwdriver |
2 x | 5 LiPo XH>EH adapter |
1 x | Squared carbon wing joinner 5x5x220 mm |
3 x | Extension silicon 30 cm female (Futaba) |
1 x | 140 mm rods + T patellas set for direction control |
1 x | Red smoke bombs AX-60 (5 pcs) |
1 x | ABS tube 9.0x7.0x1000 mm |
1 x | ABS tube 20.0x18.0x1000 mm |
1 x | Bidule 111 3000 mm |
1 x | Profile ABS half cane 3x1000 mm |
2 x | Flat washer 3.2 mm (20 pcs) |
2 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
2 x | 3,2x1000 mm 2:1 red termoretract tube |
2 x | Profile ABS half cane 4x1000 mm |
2 x | Horn for flap control (1 pcs) |
1 x | Conector FUTABA Servo male (10 pcs) |
1 x | Connectors banna oro 6,0 mm (M/F) |
2 x | 3,2x1000 mm 2:1 black termoretract tube |
3 x | Glidder Mü13e (Bergfalke) |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 10 m |
1 x | 30 cm MULTIPLEX female connector |
1 x | M2,5 5Diam metal ball link V3 (2 pcs) |
1 x | 5 mm M2 variable inclined horn |
1 x | Silicone black 1,0 qmm wire ( 1 m) |
1 x | Buy Perforated film 100 cm / 20 m |
2 x | Cable silicona female batt. receptor 30 cm (Futaba) |
1 x | quality beech plywood BIRCH 600x300x2.0 mm |
1 x | Cable grommet 9.5 mm (4 uds) |
1 x | Initior Transmitter FTX2 Wireless |
1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
2 x | Large flex hinge (12 uds) |
1 x | Conector FUTABA Servo female (10 pcs) |
2 x | Balsa panel 3.0x100x1000 mm |
1 x | Balsa panel 4.0x100x1000 mm |
2 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
2 x | Rescue 1,8m2 / BackPack |
3 x | Para-RC Trike "RC-Bullix" |
1 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
1 x | Fresa corte diamante Ø 2.7mm (bola) |
2 x | Balsa panel 1.0x100x1000 mm |
3 x | L-Connector 4.0 mm x 1000 mm |
1 x | Universal Filter |
1 x | Kontronik ProgUnit |
2 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
1 x | Connectors DEANS (T) micro |
2 x | 18 mm wing servo holder |
3 x | Round Rod 3,0x1000 mm |
5 x | 1/4 Pilot "Heidi" |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | ABS tube 7.0x5.0x1000 mm |
1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
3 x | 1/6 Pilot "Cindy" |
2 x | Profile ABS half cane 5.0x1000 mm |
1 x | Connector Sub-D 2+5 Female |
1 x | 34 mm Alu spinner 3.17 mm pleg. propeller |
2 x | Brass control horn M2 long for wire (10pcs) |
2 x | Cable control set |
1 x | Conector JR Servo male (10 pcs) |
1 x | Piston ring for DLE-20 RA |
2 x | Silicone black 1,0 qmm wire (100 m) |
2 x | OBECHI sheet 2.0x3.0x1000 mm |
2 x | M3/5Diam metal ball link V3 (2 pcs) |
2 x | Connectors DEANS (T) |
2 x | Anodized aluminium servo M4x5/8 screw (4 blue pcs) |
1 x | Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs) |
1 x | 65 mm mini servo cover |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 20 m |
1 x | BULLIT Wing 840 mm |
1 x | Anodized aluminium servo M4x5/8 screw (4 lilac pcs) |
1 x | Manual Controller |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Aluminium sheet 500x250x0,5mm |
2 x | BABY glider drawings (Aero-naut) |
2 x | Protective open Cover for wires Ø 13 mm 1000 mm |
1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
3 x | Horn 20x28,5 mm (2 pcs) |
1 x | Cut tube |
1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
1 x | Partall paste 650 g |
2 x | SIG Coverall 1.2x4.5 m |
2 x | Flat washer 2.2 mm (20 pcs) |
1 x | Profile ABS Square 2 x 1000 mm |
1 x | Electric rocket starters (6 pcs) |
1 x | ABS "T" angle 6.0x6.0x1000 mm |
1 x | White smoke bombs AX-9 (10 pcs) |
1 x | UMX™ Whipit™ DLG BNF Basic (E-flite) |
1 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
1 x | Carbon fiber rod 14 mmx1000 mm |
1 x | Aluminium servo arm (2 uds) |
2 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Miss ULTIMATE 50E Red/Black |
1 x | CC 05 |
1 x | Allen wheel collar M3x5 |
2 x | Z type of cable coupler Ø 1.8 (2 uds) |
3 x | U Profile ABS 1,0x2,0x1000 mm |
1 x | Lock washer 2.2 mm (20 pcs) |
2 x | Anodized alum. M4x0,7x25 mm Button Head screw (4 blue pcs) |
1 x | Gold antispark 4 mm plug |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | Futaba Female 40 cm extension |
1 x | Monokote BLUE metalizado (1.8x0.65m) |
1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
1 x | Horn micro type4 Ø 0,5 (2 pcs) |
1 x | Balsa panel 6.0x100x1000 mm |
1 x | 58 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | Extractor piñones 2.3/3.2 mm |
2 x | BALSA triangular 10x10x1000 mm |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
1 x | Pine wood slat 2.0x2.0x1000 mm |
2 x | Brass control horn M2 short for wire (2 pcs) |
1 x | ABS "T" angle 10.0x10.0x1000 mm |
2 x | Paramotor BackPack XXS 2 |
3 x | Horn 5/20 with M2 Bearing |
1 x | Strip 2,5x1,25x330 mm |
2 x | Profile ABS half cane 4x2.5x1000 mm |
1 x | Buy Perforated film 100 cm / 50 m |
2 x | Rubber profile 8-2 mm 2M |
1 x | AX-60 starters (5 pcs) |
2 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
5 x | 6 mm M3 variable horn |
1 x | Oracover Yellow CUB 2 m |
5 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
2 x | Spray EC Red 400ml |
1 x | Cable grommet Ø 6.4 mm (4 uds) |
1 x | Blue smoke canister 100 g |
2 x | Balsa panel 2.0x100x1000 mm |
1 x | ABS tube 5.0x4.0x1000 mm |
1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
1 x | Paint gun for sprays |
1 x | Truck-trailer for gliders 720 x 239 mm |
1 x | 11 mm wing servo holder |
1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
1 x | Green smoke canister 140 g |
4 x | Glases Innovation Plus |
1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
3 x | Horn 5/15 with M2 Bearing |
2 x | Conector BEC male (10 pcs) |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | 1000 ml sealer (DOPE) |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | Cable grommet Ø 4 mm (4 uds) |
1 x | Futaba Female 40 cm extension |
1 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
2 x | 12,7x1000 mm 2:1 green termoretract tube |
1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs) |
1 x | Short ball link M2 (6 uds) |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
2 x | Horn mando small (2 pcs) |
3 x | Cable set PREMIUM , fuselage/wing one4one |
2 x | Jeti Advance Plus Program Card |
2 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
1 x | Pine wood slat 2.0x10.0x1000 mm |
2 x | Profile ABS half cane 2.0x1000 mm |
2 x | Horn DUBRO 1/2A |
1 x | M3/5 Diam metal short ball link V3 (2 pcs) |
1 x | Ball Link Plier |
1 x | 12 mm floating pad (49 pcs) |
1 x | ABS tube 9.0x8.0x1000 mm |
1 x | 100 mm rods + T patellas set for direction control |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
2 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | Z type of cable coupler Ø 1 (2 uds) |
2 x | Rubber profile 10-2 mm 2M |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
2 x | PVC yellow transparent battery termo-retract 69 mm (10 m) |
2 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
2 x | Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs) |
1 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
2 x | Quicklock washer 2 mm (10 pcs) |
2 x | Blind nut M2 (10 pcs) |
2 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | Jeti Box mini |
2 x | Para-RC Mix |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 5 m |
1 x | Buy Perforated film 145 cm / 50 m |
2 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Aluminium M2x12 mm screw (4 pcs) |
2 x | MXS-C (Mini) Blue |
1 x | White large kwik link (10 pcs) |
1 x | Adjustable launching hook |
1 x | 13 mm wing servo holder |
1 x | ABS 500 x 400 x 0,5 mm (white) |
2 x | Glider PIROL |
1 x | Boat 43 mm (5 pcs) |
1 x | Ball Link Plier |
1 x | Conector JR Servo female (10 pcs) |
1 x | Xplorer2 anemometro |
1 x | Connectors DEANS 4 pins (1 pair) |
2 x | 6 mm blue aluminium threaded horn with patella |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | 19 mm 2:1 black termoretract tube |
1 x | Painting GHT Lexan Black 150 ml |
2 x | A/C quality beech plywood 600x300x1.5 mm |
1 x | Field folding model stand |
3 x | Silicone red 4,0 qmm wire ( 1 m) |
1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
2 x | Circlick securite |
3 x | 7 mm gas motor standoff |
2 x | Horn with ball 40x30 |
1 x | Smoke set "M" |
2 x | Silicone black 4,0 qmm wire ( 1 m) |
3 x | Lock washer 3.2 mm (20 pcs) |
1 x | Oracover Red 2 m |
1 x | 3-Blade Spinner 85 x 80 mm GFK |
2 x | Fresa corte diamante Ø 2.35mm (lentil) |
2 x | Extension 100 cm (Futaba) |
1 x | Hacker X-Pro USB interface V2 |
1 x | Extension silicon 35 cm (Futaba) |
4 x | Ball link M2 (10 pcs) |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | 57 mm micro-mini servo cover |
1 x | Field folding model stand SebArt |
2 x | Conector Servo female 4 pines |
2 x | Round Rod 5,0x1000 mm |
1 x | PIX Hawk with accesories |
1 x | Spray Graphit 33 |
1 x | 2,5x60 mm allen screwdriver |
1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
1 x | Propeller RABOESCH.Ms 20mm/M3r 5-BL (rigth hydropropeller) |
2 x | L-Connector 1.5 mm x 1000 mm |
1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
1 x | Cap closure 33/23.5mm (2 uds) |
2 x | Anodized aluminium servo M4x5/8 screw (4 silver pcs) |
3 x | Brass control horn M4 short for wire (10pcs) |
1 x | M2 5Diam black ball link V2 (2 pcs) |
1 x | Futaba male 40 cm extension |
1 x | Black smoke bombs AX-60 (5 pcs) |
1 x | Conector FUTABA Servo female BLUE silicon (10 pcs) |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
2 x | Profile ABS half cane 6.0x1000 mm |
1 x | XH male balance (2S) connector (2 pcs) |
3 x | Anodized aluminium M4x0,7x20 mm screw (4 blue pcs) |
2 x | Balsa panel 1.5x100x1000 mm |
1 x | 45 mm rods + T patellas set for direction control |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Gold antispark 5,5 mm plug |
1 x | "S" set for boats |
2 x | A/C quality beech plywood 600x300x5.0 mm |
2 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | XT-60 connector (male) |
1 x | Cross Connector 4.0 mm x 1000 mm |
1 x | ABS tube 4.0x3.0x1000 mm |
2 x | Bec MR UBEC 5A (5v/6v/7v) |
1 x | AX-60 starters (5 pcs) |
1 x | Silicone red 6,0 qmm wire (25 m) |
1 x | 30 mm Alu spinner 3 mm pleg. propeller |
1 x | Yellow smoke canister 65 g |
1 x | Bidule 170 ARF 3.48 m |
2 x | Profile ABS half cane 8.0x1000 mm |
2 x | Connectors banna oro 2 mm (M/F) |
3 x | Extension silicon 75 cm (Graupner) |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | Blind nut M6 (4 pcs) |
2 x | Hot Glue Stick GREEN |
1 x | PPM Encoder Module |
1 x | Horn 6/27 with M3 Bearing |
1 x | Vacuum pump 12 CFM |
1 x | Anodized aluminium servo M3x16 screw (4 red pcs) |
2 x | Extension silicon 25 cm (Graupner) |
2 x | U Profile ABS 8,0x4,0x1000 mm |
3 x | Connector CAN 15 |
1 x | "M" set |
1 x | Motor A2212/13T |
1 x | DYNAMOMETER S-1580 |
3 x | X-RAY Micro QR |
3 x | Blind nut M6 (4 pcs) |
2 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Strip ABS 2.0x8.0x1000 mm |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | M2,5 / 5Diam metal short ball link V3 (2 pcs) |
1 x | Optical RPM Sensor |
1 x | Black spiral protective cover for wires Ø 0,5/50 mm - 25 m |
3 x | Kwik link aluminio IZD. M2.5 L: 23mm (2 uds) pin Ø 1.6 |
1 x | Connectors banna oro 2 mm (M/F) (ultralight) |
5 x | Pilot "Dick" Legends Series (Slimline) |
1 x | Sealing Iron Sleeve PROF |
1 x | Threaded coupler M2 (10 uds) |
1 x | XH female balance (3S) connector (2 pcs) |
2 x | E-FUN BUG (ROI-Import) |
1 x | Conector JR/Uni Servo female BLUE silicon (10 pcs) |
1 x | Cabin latch Fox MDM1 4m (pair) |
2 x | Surprise XII Rudder (Freudenthaler) |
1 x | White smoke bombs AX-3 (10 pcs) |
1 x | 90x75 mm standart servo cover |
1 x | Carbon fiber rod 4.0 mmx1000 mm |
1 x | Z type of cable coupler Ø 2 (2 uds) |
1 x | ABS tube 5.0x3.0x1000 mm |
2 x | Anodized aluminium servo M4x5/8 screw (4 black pcs) |
1 x | Red smoke canister 65 g |
1 x | 10 mm Quick clamp_L (6 pcs) |
1 x | "S" set for planes |
1 x | Allen wheel collar M4x6 |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 20 m |
2 x | ABS angle 4,0x4,0x1000 mm |
1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
1 x | 45 mm rods set for direction control |
1 x | Brass control horn M4 long for wire (4 pcs) |
1 x | Glider KNIRPS |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Papel japones 12 grs/m2 760x510 mm JAPICO |
2 x | Circlick securite |
1 x | 2,4x1000 mm 2:1 black termoretract tube |
1 x | T-Connector 4.0 mm x 1000 mm |
1 x | Kwik link AL M4 con Clip (2 pcs) |
1 x | Extension PVC 150 cm (Graupner) |
2 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
2 x | Gates hinge black 30x16 mm (2 pcs) |
2 x | 30 cm BEC cable (male) |
2 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 lilac pcs) |
1 x | Remote electric ignition system |
3 x | ABS angle 1.5x1.5x1000 mm |
1 x | Conector JR Servo female (10 pcs) |
2 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
1 x | Blue metalic ball link M2/2 azul (2 pcs) |
2 x | NIKE-2 EVO ARF |
1 x | Carbon fiber rod 2.0 mmx1000 mm |
2 x | Blind nut M8 (10 pcs) |
1 x | Prolongador S-Bus JR/JR 20cm |
1 x | Parachutist |
1 x | Silicon black 2,5 qmm cable ( 25 m) |
1 x | Protective Cover for wires Ø 15 mm 1000 mm |
1 x | Miss ULTIMATE 50E Yellow/Black |
1 x | Extra long horn 60x30 |
1 x | 30 cm DEANS female connector |
2 x | Vacuum bag, 1200 mm x 50 m |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
2 x | U Profile ABS 2,0x4,0x1000 mm |
1 x | Green smoke canister 100 g |
2 x | Connector Sub-D 2+5 Male |
1 x | ABS angle 2,0x2,0x1000 mm |
1 x | White smoke bombs AX-18 (5 pcs) |
1 x | Wing connector 8pin with pin strip, plug & socket |
3 x | 2 mm male connector (2 pcs) with safety connector |
1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
2 x | TP/TopFuel - JST-EH 4/5S Adapter |
2 x | ABS I Strip 10x5x1000 mm |
1 x | U Profile ABS 5,0x10,0x1000 mm |
1 x | Me-163 |
2 x | Brass control horn M2 large for wire (2pcs) |
1 x | Big Crow DLE-170M |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 5m |
1 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | Initior Receiver FRX2 Wireless |
1 x | Horn 5/10 with M2 Bearing |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
2 x | Connectors banna oro 3 mm (M/F) |
2 x | ABS Strip 1.5x6.0x1000 mm |
1 x | M2,5 Diam metal short ball link V3 (2 pcs) |
1 x | Extension silicon 30 cm female (Graupner) |
2 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
2 x | Round Rod 2,0x1000 mm |
1 x | Hobbylite Filler, Balsa colour |
2 x | Strip ABS 2.0x3.0x1000 mm |
1 x | White smoke canister 65 g |
1 x | Xplorer3 anemometro |
1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
1 x | Motor DLE 200cc Premium Muffler |
1 x | ABS tube 12.0x10.0x1000 mm |
1 x | Digital Air Speed Sensor And Pitot Tube Set |
1 x | Carbon fiber rod 20 mmx1000 mm |
1 x | ABS rectangular profile 12x6.0x1000 mm |
1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
2 x | Bag connector 2 mm |
1 x | 3l Smoke oil |
1 x | Extension silicon 10 cm (Futaba) |
1 x | Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m |
2 x | Pulley brass 6/1,5 (2 pcs) |
1 x | Kwik link with arm M5xM2,5xL30 |
2 x | Slave-cable USB Easy Sim |
1 x | Cable coupler M2x66 (2 uds) |
3 x | 5 mm M2 variable horn |
1 x | Micro clevis (10 uds) |
2 x | Profile ABS triangular 4.0x1000 mm 60º |
1 x | HITEC 20 mm servo arm with ball link |
3 x | Tapping Screw M2.2x65 (10 pcs) |
2 x | 100m servo "Premium" wire (white/red/blue) |
1 x | Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC |
1 x | Futaba 20 mm servo arm |
1 x | Futaba 30 mm servo arm with M3 ball link |
1 x | Profile ABS half cane 7.0x1000 mm |
2 x | PET film Mylar® A 350, 50 cm, roll/ 5 m |
1 x | Miniature brass strap hinge, 1 m |
1 x | Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm |
2 x | Pulley brass 16/2 (2 pcs) |
1 x | SE Ring 480 mm (2 pcs) |
1 x | Pan head screw M2x16 PH |
1 x | Glass fabric 80 g/m² (Interglas 05533, finish FK 144, twill weav |
1 x | Titanium M3x0,5x12 mm Flat Head screw (4 pcs) |
2 x | Tapping Screw M2.9x9.5 (10 pcs) |
1 x | Porta Kwik link M3 3 mm (2 pcs) |
1 x | |
1 x | Glass fabric 49 g/m² (1,27 x 10 m) |
1 x | Futaba 38 mm servo arm with ball link |
1 x | PVC 0,25 qmm servos wire Graupner (5 m) |
1 x | EasyFLY Addon |
1 x | PVC grid straight 290x185x0.32 mm |
2 x | Pin to cable coupler M1,6 ⌀ (6 pcs) |
2 x | 20x200 mm battery rings |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link |
1 x | Futaba 46 mm servo arm with ball link |
1 x | Profile ABS triangular 2.0x1000 mm 90º |
1 x | Porta Kwik link M4 4 mm (2 pcs) |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m |
2 x | Treaded hexagonal socket insert M3 Br (4 pcs) |
2 x | Spring lock washer 3.1 mm (20 pcs) |
2 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
2 x | Hitec 20 mm servo arm |
1 x | Pin 3,0 to cable coupler M3,0 ⌀ (6 pcs) |
1 x | Ø 2 mm pin for Kwik link MPJ2162/2163 (6 pcs) |
1 x | Pull-Pull complet set with CF rudder double servo arm |
1 x | Futaba 38 mm servo arm |
2 x | Flap hinge 33x9 mm (6 pcs) |
1 x | Pulley brass 10/2 (2 pcs) |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 20m |
2 x | Flat Connector 4.0 mm x 1000 mm |
1 x | 50m servo "Premium" wire (white/red/blue) |
1 x | Adapter rotula M3 |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
2 x | Interface Jack Adapter IKARUS |
1 x | ABS "T" angle 2.0x2.0x1000 mm |
3 x | Tapping Screw M2.2x9.5 (10 pcs) |
1 x | 10m servo "Premium" wire (white/red/blue) |
2 x | Small pinned hinge (12 uds) |
2 x | Micro flex hinge (12 uds) |
1 x | Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC |
1 x | Servo M2x5/16 screw (4 pcs) |
1 x | Micro clevis 0.8 mm(10 uds) |
1 x | Pulley brass 4/1,5 (2 pcs) |
1 x | SE Ring 240 mm (2 pcs) |
2 x | ABS angle 10,0x10,0x1000 mm |
1 x | Glass fabric 49 g/m² (1,27 x 20 m) |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 3m |
2 x | Pulley brass 2,5/1 (2 pcs) |
3 x | Threaded insert M4 (4 pcs) |
2 x | Pan Head Screw M2x6 PH |
2 x | 46 mm Futaba servo arm tandem with ball link |
1 x | PVC 0,35 qmm servos wire Graupner (100 m) |
1 x | Hexagonal Nut M2 (10 pcs) |
1 x | Glass fabric 80 g/m² (twill) 100 cm x 50m |
1 x | Futaba 25 mm servo arm with ball link |
2 x | Futaba 50/60 mm servo pull-pull double arm with ball link |
1 x | HITEC 17 mm servo arm with ball link HITEC |
1 x | Servo M2x7/16 screw (4 pcs) |
1 x | Spring pin Ø 1 x 6 mm (10 pcs) |
2 x | PVC grid diagonal 290x185x0.32 mm |
1 x | Metal ball clevis M3 (10 uds) |
1 x | Futaba 54 mm servo arm with ball link |
1 x | Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m Aero Finish |
1 x | Panel Honeycom carbon 350x150x3.5mm |
1 x | Glass fibre sleeve Ø 20 mm X 10m |
2 x | Futaba 14/20 mm servo pull-pull double arm with ball link |
1 x | Ø 1,6 mm pin for Kwik link MPJ2150/2157 (6 pcs) |
2 x | Kwik link aluminio IZD. M3 L: 30mm (6 uds) pin Ø 2 mm |
1 x | Hitec 25 mm servo arm with ball link |
2 x | Futaba 2x20 mm servo double arm |
1 x | Pulley brass 8/2 (2 pcs) |
1 x | Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC |
2 x | Glass fibre sleeve Ø 20 mm X 20m |
2 x | M4xM2,5xL30 nylon clevis and arm (10 uds) |
1 x | Pulley brass 2,5/1 (2 pcs) |
2 x | Futaba 17 mm servo arm with ball link HITEC |
2 x | Brazo Servo XTorque 52 mm HITEC 25T-6 |
1 x | Spring pin Ø 2 x 6 mm (10 pcs) |
1 x | Hexagonal Nut M3 (10 pcs) |
1 x | Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC |
2 x | Metal clevis M2,5 (10 uds) |
3 x | Screw M2x8 (10 pcs) |
1 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m |
1 x | Threaded insert M6 (10 pcs) |
2 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
2 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
1 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 5 m |
1 x | Tornillo cabeza boton M4x12 mm (5 pcs) |
3 x | Socket Head Screw M2x5 |
2 x | Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm |
2 x | Hexagonal Nut M2.5 (10 pcs) |
1 x | Glass fabric 80 g/m² (silane, twill) 100 cm x 10m |
1 x | Screw M2.5x10 (10 pcs) |
1 x | Peel ply 64 g/m² (plain weave) 150 cm x 20m |
1 x | Socket Screw M3x9 mm |
1 x | Glass fabric 390 g/m² aero,10x1m |
1 x | Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC |
1 x | Glass fabric 425 g/m² aero,10x1m |
2 x | Glass fibre braided sleeve (45mm) roll 20m |
1 x | Micro clevis (10 uds) |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
2 x | Propeller APC 10x4.7 |
1 x | Propeller APC 11x5.5 Electric Pusher |
2 x | Propeller APC 10x10 Electric |
1 x | Propeller APC 10x3,8 SF |
1 x | Propeller APC 10x5 Electric |
1 x | PROFI Box JETI |
2 x | BABY glider (Aero-naut) |
2 x | 2 LiPo XH>EH adapter |
1 x | Propeller APC 13x8 Electric |
1 x | Propeller APC 10x3,8 SF Electric Pusher |
2 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | Propeller APC 13x10 Electric |
1 x | Propeller APC 13x6.5 Electric |
1 x | Propeller APC 12x6 SF |
1 x | Propeller APC 10x4.7 SF Pusher |
1 x | Propeller APC 12x3.8 SF |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | Propeller APC 10x5.5 MR Electric multirrotor PUSHER |
1 x | Propeller APC 12x10 Electric |
2 x | Propeller APC 12x8 SF |
1 x | Propeller APC 10x5.5 MR Electric multirrotor |
1 x | Propeller APC 12x6 Electric |
2 x | Glider IKARUS |
1 x | Propeller APC 13x6.5 Electric Pusher |
1 x | Propeller APC 11x3.8 SF |
1 x | Propeller APC 10x6 Electric |
1 x | Heat sink for Optotronix LEDs |
1 x | White 2,4 GHz antenna exit guides (2 pcs) |
2 x | Resistor 3W 5% OR47 |
1 x | Landing lights 18 mm (0.71in) |
1 x | 7.94 x 4.76 mm tygon tube 1 m |
1 x | Dean-T Plug Mold |
1 x | Piston ring for ZG 20 and G240RC |
1 x | Release wax 250ml |
1 x | Prop washer for ZG45SL, ZG62/S/SL and ZG74B/ZG80B |
1 x | Fabric scissors curved (offset handles), 16 cm / 6" length |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Crimping tool |
1 x | Fresa corte diamante Ø 1.0mm (bola) |
3 x | Brass control horn M3 short for wire (2 pcs) |
1 x | Deposito SECRAFT V2 1000 ml Gas |
2 x | 500 ml sealer (DOPE) |
1 x | Spring Clip Ø25 mm |
1 x | DA 85 / DA 100 / DA 100 L carburetor |
1 x | |
1 x | Rigid coupling brass Ø 4.0 / 2.3 mm L: 20 mm |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | Piston ring for DA-60 and DA-120 |
1 x | Black "FUEL VENT" round aluminum overflow socket |
1 x | Cylinder for ZG20 |
1 x | Horn 6/20 with M3 Bearing |
2 x | Propeller RABOESCH M3 50 mm (3 Blades pr) (Left hydropropeller) |
1 x | Crimping tool |
1 x | Digital precision scale up to 2000 g |
1 x | Concave-Convex sandpaper file 13 mm |
1 x | Fabric scissors curved Premium, 16 cm / 6" length |
1 x | Spare Shaft Ø4mm L:450x18mm M4 |
1 x | Extra hard 250 ccm complete gasoline fuel tank |
1 x | 1000 ccm gasoline fuel tank |
1 x | Check valve quick hose connector 4-4 mm |
3 x | BALSA trip 2.0x10.0x1000 mm |
1 x | Electronic double valve landing gear |
2 x | Propeller RABOESCH M3 50 mm (3 Blades pr) (Right hydropropeller) |
3 x | LH long aluminium horn L31xH30 (2pcs) |
1 x | Blue "FUEL VENT" round aluminum overflow socket |
1 x | EXTREME FLIGHT BLACK MAGNETIC ROUND FILLER PLUG |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
2 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | BOSCH spark plug cap for DA 50-R, DA 100 and DA 150 |
2 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | Reed valve for DA 50-R |
1 x | BALSA triangular 8x8x1000 mm |
1 x | Piloto WWII USAAF 12" Scale 1/6 - 1/5 |
1 x | Aluminium Hub for folding Props 43 mm M8 Shaft 5 mm |
1 x | F9F COUGAR Grey ARF 1.562 mm |
2 x | Piloto jet 130 mm |
1 x | ASPIRE Red ARF 2.000 mm, Fuselage |
1 x | L-39 Albatros Scale 1:4.75 1991 mm |
2 x | BALSA triangular 6x6x1000 mm |
1 x | Aluminium Hub "Z" for folding Props 38 mm M8 Shaft 8 mm |
1 x | ASPIRE Red ARF 2.000 mm, Front Fuselage |
1 x | Pilot WWII US Navy Pacific 12" Scale 1/6-1/5 |
1 x | F-16 Falcon Black Knights 1:6 (1630 mm) |
1 x | ASPIRE Blue ARF 2.000 mm |
1 x | HAWKER HUNTER 1:5,8 (1.770mm) |
1 x | F-16 Scale 1:6 (1.630mm) |
1 x | Duplex 2.4 EX TopFuel MTAG Battery Reader |
1 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
1 x | DUPLEX 2.4EX MSpeed PITOT <300 Km/h |
1 x | DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch |
1 x | Battery RX JETI LiIon RB 2600 7.2v |
1 x | DUPLEX 2.4EX MUI 150 Sensor |
3 x | Car Charger DC/DS-16 |
1 x | DUPLEX 2.4EX MFlow2 Gas 800 |
1 x | DUPLEX 2.4EX MT 125 temperature sensor |
1 x | DUPLEX 2.4EX RC Power Switch 10 |
1 x | Battery LiFe TopFuel 3100 mAh 4s MTAG 30C |
1 x | Extension 15 cm (Futaba) |
1 x | Battery LiFe TopFuel 3100 mAh 2s MTAG 30C |
1 x | DUPLEX 2,4GHz MRPM-AC EX |
2 x | DUPLEX 2,4EX Switch SAFETY 2-Position Safety DC-16/14 |
1 x | DUPLEX 2.4EX MUI 75 |
1 x | DUPLEX 2.4EX MT 300 EX |
2 x | Caps multicolor Switch JETI |
1 x | Battery RX JETI LiIon RB 5200 7.2v |
2 x | AddCAP 10AS capacitors |
1 x | Extension silicon 100 cm (Graupner) |
1 x | Cabel "Y" 15 cm |
1 x | DUPLEX 2.4EX Central Box 220 + 2x Rsat2 |
1 x | DUPLEX 2.4EX Satellite receiver Rsat 2 |
1 x | Lipo GENS 2300 6.6v 2s1p Li-Fe Pack emisora |
1 x | Duplex 2.4EX tray transmitter DC-16 II Black multimode |
3 x | DUPLEX 2.4GHz GPS |
2 x | Cable S.BUS 3 salidas 300 mm |
1 x | DSM 10 Dual Switch Mixer |
1 x | Extension 90 cm (Futaba) |
1 x | DUPLEX 2.4EX Central Box 210 |
1 x | DUPLEX 2.4 EX MBar |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø20 mm, Ø18 mm) |
1 x | Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm) |
2 x | Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø19 mm, Ø15 mm) |
1 x | Tarjeta programadora RAY G2 |
1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | Carbon tube (L 1000 mm, Ø5 mm, Ø3 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
1 x | Carbon tube 3K-Matt (L 1000 mm, Ø25 mm, Ø23 mm) |
1 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
1 x | Carbon tube (L 1000 mm, Ø8 mm, Ø6 mm) |
2 x | Carbon tube 3K-PW (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm) |
1 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
1 x | Carbon fiber rod 0.8 mmx1000 mm |
1 x | Carbon fiber rod 1.5 mm x 2000 mm |
1 x | Carbon tube (L 2000 mm, Ø12 mm, Ø10 mm) |
1 x | Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø26 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø22.5 mm) |
1 x | Carbon tube (L 2000 mm, Ø16 mm, Ø14 mm) |
1 x | CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm) |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Carbon tube (L 1000 mm, Ø7 mm, Ø5 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
2 x | Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm) |
1 x | XH male balance (7S) connector (2 pcs) |
1 x | MZ-12, 6 Channel HoTT |
1 x | XH female balance (2S) connector (2 pcs) |
1 x | Foam wheel Ø 38 mm (2 pcs) |
2 x | LA500 rotor head shaft |
1 x | Reductora IPS 150 DX2BB-DXCS 9,7:1 |
1 x | XH female balance (8S) connector (2 pcs) |
1 x | Propeller 9x4,7 SlowFlyer |
1 x | XT-60 connector (female) |
1 x | MR30 connector female |
1 x | XH female balance (4S) connector (2 pcs) |
1 x | XH male balance (5S) connector (2 pcs) |
1 x | Conector XT-30 (hembra) |
1 x | Cooler motor type 400 |
3 x | Propeller 8x4,3 SlowFlyer |
2 x | Red 4 mm connector holder |
1 x | MZ-18, 9 Channel HoTT |
1 x | Transmitter GRAUPNER MZ-24 Pro |
1 x | SIG Coverall 1.2x1.8 m |
1 x | XH female balance (9S) connector (2 pcs) |
2 x | LA500 freewheel bearing |
1 x | Reductora IPS dual-motor 10,7:1 with spinner |
1 x | XH male balance (9S) connector (2 pcs) |
2 x | LA500 front gear holder |
1 x | Screw M3x5 (10 pcs) |
1 x | Protective Cover for wires Ø 6 mm 1000 mm |
1 x | Precision wrench L100 mm |
1 x | Silicone red 4,0 qmm wire (25 m) |
1 x | Piloto JET 1:3,5 |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | Tip wing protector 30x10 (2 pcs) |
1 x | Spare white 36-38 mm spinner |
1 x | Screw M4x30 (10 pcs) |
1 x | Pump hose (Ø 6/8 mm) transparent |
1 x | ABS angle 5,0x5,0x1000 mm |
1 x | Battery LiPo GENS 5300 mAh 4S 14.8V 30C (Gens Ace) |
1 x | KIRA 480-34 5,2:1 |
1 x | Profile ABS Square 1 x 1000 mm |
1 x | Extinguisher CO2 - 2 Kg |
1 x | NoNa BB wheel Ø175x55mm in pair |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
2 x | Spring clamp for tube Ø29 mm ext 1pc |
1 x | Turnbuckle M3 33x49 (2pcs) |
1 x | ABS 500 x 400 x 2,0 mm (white) |
2 x | BALSA leading edge 8x10x1000 mm |
1 x | Styrene plate 320x120x0.5 mm |
1 x | Brazo servo aluminio HITEC HS-125MG/5125MG |
1 x | Tailwheel for 60/120 size |
1 x | Ventus 2cx 4.5 m Winglets |
1 x | 25 mm fenders (10 pcs) |
1 x | 290 mm M4/4 mm Prop shaft |
1 x | SAVOX SH 1250 MG servo digi |
1 x | 16x10 tree blades propeller Master Airscrew |
1 x | Propeller electric carbon 9.5x7 |
1 x | Switch Cap M (blue) |
1 x | LED wire (white - 2pcs) |
1 x | CC 03 |
4 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 5 cell |
1 x | Y-Hose connector 3-3-3 mm |
2 x | Strip ABS 2.0x5.0x1000 mm |
1 x | PIT (Aero-Naut) |
1 x | Carbon fiber rod 2.5 mmx1000 mm |
1 x | Wheel FEMA 112 mm / 6 mm |
1 x | 38x4,5 mm wires output (2 pcs) |
2 x | Long adjustable aluminium control horn 2,8x24 |
3 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | Allen wheel collar M4x4 |
1 x | Motor Mega AC 22/45/03 E |
2 x | Small adjustable aluminium control horn with bearing 2,8x15 |
2 x | L ELBOW 90º ø 25 mm |
1 x | GPS Sensor + Logger OPTronics |
1 x | Plastic caps for AIR BURTS (30 pcs) |
1 x | Screw M2.5x20 (10 pcs) |
1 x | Altimeter Altis NAO |
1 x | Joint with bearing M2,5 22x5,5 |
1 x | KOBY 70 LV Esc |
1 x | F-16 Scale 1:6, Electric retract landing gear |
1 x | Electric Landing Gear F9F COUGAR |
1 x | Ball link V1 Ø7 M4/3 (6 uds) |
1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
1 x | Canopy Latch |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
2 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | Copier 2x20 cm pcs |
1 x | Connectors banna oro 4 mm (M/F) |
1 x | Rubber profile 6-2 mm 2M |
1 x | ABS tube 5.0x4.0x156 mm |
1 x | Fiberglass 163 g/m² 1m x 20 m (Aero, finish FK 144, plain) |
1 x | Ventral support for AX-18/AX-60 |
1 x | Propeller balancer |
1 x | Reed valve cage with petals for DA 100/150 |
1 x | Pan Head Screw M2x8 PH countersunk head |
2 x | Turbina KINGTECH K70G4 |
1 x | Filter Capacitor JR |
1 x | Turbina KINGTECH K65 G4+ |
1 x | ProgBOX MASTER Hacker |
1 x | Nut for mounting M3 (10 pcs) |
2 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 6 cell |
2 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | 15 mm gas motor standoff |
1 x | DPSI Micro - RCS RV |
1 x | RANGER Jet CANADA 1.854mm combo |
1 x | Carb Carrier, red DA-150L/170 |
2 x | Hexagonal Nut M4 (20 pcs) |
1 x | Steel conrod DA-50R and DA-60 |
1 x | 50 mm gas motor standoff |
2 x | Cessna 310 Red/Gold 3200 mm (CY MODEL) |
2 x | Protective Cover for wires Ø 6 mm 1000 mm |
1 x | KingTech Turbineoil 10L |
1 x | Ball Link ALU M3 - RH (1 pcs) |
1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell |
3 x | D.A. Fueling Valve |
1 x | KingTech K100TP G4+ Turboprop |
1 x | RANGER Jet NAVY 1.854mm combo |
1 x | KingTech Turbineoil 5L |
2 x | 30cm Flexible Stainless Steel Exhaust Tubing D=16mm |
1 x | Turbina KINGTECH K320 G5 |
2 x | FW-190 2400mm Electric Landing gear complet (CY model), |
1 x | DPSI Micro - DualBat 5.9V / 7.2V JR-JR (Dual Power Supply) |
1 x | Blind nut M5 (4 pcs) |
2 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
1 x | DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch |
1 x | Low speed needle DA-50R/100I |
1 x | KingTech Turbineoil 1L |
1 x | Ignition unit for DA-70/100/120/150/170/200 |
1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell |
1 x | Battery LiFe -1450/25C-3S 9.9V |
1 x | KingTech T-Modul 5 in 1 Telemetry |
1 x | Peel ply 95 g/m² (plain weave) 100 mm x 100 m |
1 x | Carburator spacer block DA-50R |
1 x | L ELBOW DA-120 normal(2 pcs) |
1 x | Cylinder for DA-60 and DA-120 |
1 x | Muffler DLE 20-RA |
1 x | Yellow smoke canister 100 g |
1 x | Fiberglass heat shield Ø 4 mm 1000 mm |
1 x | PC-21 2.880 mm RED |
1 x | ZG231cc SHL |
1 x | Screw M2x6 (10 pcs) |
1 x | DLE Ignition 170M |
1 x | Rear bearing for motor 35/40 cc |
1 x | Screw M3x30 (10 pcs) |
1 x | Motor DLE 120 cc |
1 x | Motor DLE 130 cc |
1 x | PC-21 2880 mm Spinner 5Blade blue |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
2 x | Foil for sticking flaps and ailerons |
1 x | CILINDER FOR DLE55, DLE111, DLE222 |
1 x | MIRAGE 2000 Camuflage PNP |
1 x | ALBATROS L-39 G2 "Camo Tiger" Turbine ready |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
3 x | Jeemo Dolly |
1 x | Spinner propeller pleg. 45 mm / 6,0 mm "Z" |
2 x | Propeller CFK 12.75x13 |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
1 x | Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs) |
1 x | Male/Female prolonguer for Balancer Thunder Power 6S |
1 x | PowerBox SparkSwitch RS |
1 x | Cylinder EME 35 cc |
2 x | Spinner propeller pleg. 40 mm / 6,0 mm "Z" carbon |
1 x | ZERO Figther A6M52 93", Electric retract Landing gear ELECTRO |
1 x | Piston EME 35cc |
1 x | TMM 1210-3S heli |
1 x | Motor EME 70 cc |
1 x | Power MULTIlight |
1 x | Motor D.A. 200 Magnesium |
1 x | EME ignition free wheel |
1 x | Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
1 x | DA 70 Twin Gas Engine |
1 x | Interruptor SPS 70v 60/120A |
1 x | Pulley brass 14/2 (2 pcs) |
3 x | Spinner propeller pleg. 36 mm/6,0 mm/0º |
1 x | Propeller CFK 14x7 |
1 x | Propeller CFK 11x8 |
1 x | Motor EME 60 cc with electric starter |
2 x | Spinner propeller pleg. 36 mm/6,0 mm/0º |
1 x | Esc MasterSPIN 75 Pro OPTO |
1 x | Round Rod 1.0x3.5 cm |
2 x | Electronic switch JETI SP06 Opto |
1 x | Pins M connect Multipin connectors AWG 20-24 |
1 x | Porta Kwik link M4 3 mm (2 pcs) |
2 x | Spinner propeller pleg. 40 mm / 5,0 mm |
2 x | Control horn long w/ball |
1 x | Propeller CFK 12.5x6.5 |
1 x | switch 1-Spring-UP 3-position DS Tx DUPLEX 2,4EX |
1 x | Brake controller for 28 and 36 mm Brakes |
3 x | Spinner propeller pleg. 38 mm/6,0 mm/7º |
1 x | Extension silicon 50 cm (Graupner) |
1 x | DUPLEX 2.4EX Central Box 320 |
1 x | Polyurethan FESTO hose 3x0,5 mm, transparent |
1 x | Oratex Red Fokker 10 m |
1 x | FESTO Filter 4 mm |
1 x | Propeller APC 12x8 Electric |
1 x | BALSA trip 10x10x1000 mm |
1 x | Birch plywood plate 600x300x1.5 mm |
1 x | L39 Mini 1.43m Red. +elec.L.Gear + 3 Microservos |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | 290 mm 290 mm M5x18 mm shaft ship |
1 x | de Havilland Vampire (Rc Factory) |
2 x | Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses |
1 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | Resistor 3W 5% 2R2 |
1 x | EDGE 540 V3 (Superlite) ORANGE |
1 x | 290x4 mm M4 shaft ship |
1 x | Pine wood slat 6.0x6.0x1000 mm |
2 x | BALSA trip 8.0x8.0x1000 mm |
2 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
1 x | Rudder 107-06 |
1 x | Spare Part Frame Set for EACHINE RACER 250 |
1 x | Equipment set XL |
3 x | Tubo Teflon Ø28 mm x 10cm |
1 x | A/C quality beech plywood 600x300x0.8 mm |
2 x | A/C economy plywood 600x300x6+.0 mm |
1 x | Servo digital 17g MG - Std |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | EXTRA 300L 1.2 m Blue |
1 x | ZENOAH ZG 80B |
1 x | Rigid coupling brass Ø 3 mm L: 20 mm |
1 x | Socket Head Screw M2,5x12 |
1 x | 17 mm servo arm with ball link DES Graupner |
1 x | Rigid coupling brass Ø 5.0 / 4.0 mm L: 25 mm |
1 x | Rigid coupling brass Ø 4 mm L: 25 mm |
2 x | Birch plywood plate 600x300x2.5 mm |
1 x | ZENOAH ZG 26SC with magneto ignition |
1 x | 270 mm 3/3 mm shaft ship |
1 x | EXTRA 300L 1.2 m Deep Purple |
1 x | EDGE XL Orange |
2 x | Treaded hexagonal socket insert M4 Br (4 pcs) |
1 x | L39 Mini 1.43m Checa Rep. +elec.L.Gear + 3 Microservos |
1 x | Beech dowels 10 mm x 1000 mm |
1 x | Glass fabric 49 g/m² (1,27 x 5 m) |
1 x | Mini Avanti S Jet, Set conversion turbine(SebART) |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | Pulley brass 5/1,5 (2 pcs) |
1 x | Pin hinge 34x16 mm (10 uds) |
1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
1 x | Styrene plate 320x120x1.0 mm |
2 x | ULTIMATUM 2.0 m yellow/blue |
1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
1 x | Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm) |
1 x | Horn 16,5x20 mm (2 pcs) |
1 x | Sandwich carbon + poplar 2mm + carbon 290x160 mm |
1 x | Glass fibre sleeve Ø 20 mm |
1 x | SlowFlyer control horn (3 pcs) |
2 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | Small aluminium horn blue (2pcs) |
1 x | Propeller RABOESCH M5 130 mm (4 Blades) (Right hydropropeller) |
1 x | SINGLE FUELING VALVE GASOLINE MK2 SMALL |
2 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m |
2 x | Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6 |
2 x | Rudder forward 70x28 "type Kato" |
1 x | Micro control horn (2 pcs) |
1 x | Long horn 50x26 |
1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell |
2 x | Silicone black 6,0 qmm wire ( 1 m) |
1 x | Transparent spiral protective cover for wires Ø 0,5/50 mm - 25 m |
1 x | Extension MPX-MPX 20 cm |
2 x | Cable set PREMIUM, fuselage/wing |
1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell |
1 x | Conexion PREMIUM MAXI fuselaje/alas 200 cm one4one |
1 x | ULTIMATUM 2.0 m Red Bull |
1 x | Fiberglass plate 1200x1000x0,2 mm |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 20m |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 10m |
2 x | PVC plate 320 x 194 x 0.23 mm (brown) |
3 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell |
1 x | Small kwik link (10 pcs) |
1 x | Turnbuckle M1,6x17/27 (2pcs) |
1 x | Propeller MEJZLIK 9,5x3 SF Carbon Indoor |
3 x | Reductora IPS 150 DX2BB-BXCS 7:1 |
2 x | Reductora IPS 150 DX2BB-CXCS 8,6:1 |
1 x | Adapter 3,2 mm M6 for spinner 40 mm fixed propeller |
1 x | Transmitter JETI Duplex DS-12 EX Multimod YELLOW |
2 x | Crystal Universal RX 35.090 Ch 69 |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Baseplate servo |
1 x | ODYSSEY HONDA ARF 2190 mm |
1 x | ODYSSEY Yellow ARF 2190 mm |
1 x | P-51D "Gunfighter" 89" (2260 mm) |
1 x | SPITFIRE Mk-IX 81", Electric retract Landing gear |
1 x | ODYSSEY Yellow, Set Elevators |
2 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm |
2 x | Rudder forward 80x28 "type Kato" |
1 x | VARIO module Hott |
1 x | Long extra-strong control horn with bearing 2,8x34 |
1 x | Receiver GRAUPNER GR-16 HoTT |
2 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm |
1 x | Horn DU-BRO 1/2 (2 pcs) |
1 x | Propeller RABOESCH M4 70 mm (5 Blades) (Right hydropropeller) |
1 x | DUPLEX TGs 2,4 GHz (transmitter module) |
1 x | Stick with Button DC/DS-16/14/24 Tx DUPLEX 2,4EX |
3 x | PPM to Jack link - Tx Black (mono) DC/DS Tx DUPLEX 2,4EX |
1 x | Spinner NUT M5 |
1 x | DUPLEX 2.4 EX MVario2 |
1 x | Tx JETI Duplex DC-24 II Carbon Line Gray |
1 x | Switch for DC: Long 3 Position |
2 x | DUPLEX 2,4EX Switch SAFETY 2-Position Safety DC-16/14 |
1 x | JETI transmitter DC-14 II Green Multimode |
1 x | Cable grommet Ø 5 mm (4 uds) |
2 x | DUPLEX MUI 30 Sensor |
1 x | Teacher / Student Cable |
1 x | Servo FUTABA BLS 272SV |
2 x | LA500 cyclic central part |
2 x | Suction funnel for carburetor 90D-L (red) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm) |
1 x | MPX Sub-D Adaptor |
1 x | Banna gold connector 2,5 mm (M/F) |
1 x | Oratex Natural White 2m |
1 x | Reductora IPS 150 DX2BB-FXCS 11,8:1 |
2 x | LA500 ciclic lever |
1 x | Retract undercarriage |
2 x | LA500 pre-rotation gear hub |
1 x | Spinner Alumin. fixed propeller 50 mm / 4,0 mm |
2 x | Microbalon filler for CA glues. Packaging bottle 20g |
1 x | 51 mm white plastic spinner for fixed propeller / 4,0 mm axi |
1 x | Fibra vidrio 25g 110 cm/ 3m (Interglass 02034, finish FE800 pl |
1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
1 x | P-47 Electric Landing gear complet (CY model), |
2 x | LA-7 (CY model)2450 mm |
2 x | Silicone red 1,5 qmm wire ( 25 m) |
1 x | Silicone red 6,0 qmm wire ( 1 m) |
1 x | Fiberglass plate 350x150x2.0 mm |
2 x | Dia. 16x35 mm PTFE tube for escape |
1 x | 90° TUBE-ANGLE Ø 28 mm |
1 x | Stainless Steel Bend D 12x0,4mm |
1 x | Tubo Teflon Ø25 mm x 10cm |
1 x | Carburator joints for SAITO FA80/80GK/72/72GK |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 3 cell |
1 x | Screw M3x20 (10 pcs) |
1 x | Screw M3x8(10 pcs) |
1 x | Spinner propeller pleg. 30 mm/5,0 mm/0º |
1 x | Silicone red 1,0 qmm wire ( 1 m) |
1 x | P-47 Red (CY model) |
1 x | P-47B Razorback DWZ 2.440 mm (CY model) |
1 x | NIEUPORT XXIV ARF 1780 mm |
2 x | LA-7 Electric Landing gear complet (CY model) |
1 x | Spitfire MK IX 2800 mm (CY model) |
1 x | P-47B Razorback DWZ 2060 mm (CY model) |
2 x | Wings Bags JEEMO |
2 x | Fuselage Bags JEEMO |
1 x | JEEMO Kit ARF Basic (2 color) - XTRALIGHT |
1 x | XICOY X45 rail |
2 x | Hose clamps 0.16-0.20in, (4 pieces) |
1 x | Pendulun 27g to tank |
1 x | Sensor Ignition RCEXL Universal |
1 x | Tester CDI Rcexl |
1 x | Tufnol Choke Lever Arm d=4,7mm |
1 x | Spring Clip 28 mm teflon tube |
1 x | Spring Clip 25 mm teflon tube |
1 x | 90° TUBE-ANGLE Ø 25 mm |
1 x | Gasket for motor DA 50 |
1 x | Stainless Steel Bend D 15x0,4mm |
1 x | Filetro gasoline filter Tillotson OW497 |
1 x | Tufnol flange carburator |
1 x | 180° TUBE-ANGLE Ø 25 mm |
1 x | Extension Ø25mm x L: 60 mm |
1 x | 10 mm gas motor standoff |
2 x | Dia. 20x10 mm teflon tube for escape |
1 x | DA-50R motor alumine support |
1 x | Gasoline filter |
1 x | Spring Clip 16 mm teflon tube |
1 x | Gasket for motor DA 50 |
1 x | Fixing Ring with Base 40 mm |
1 x | Porex gasoline filter |
1 x | SE-M Filter |
1 x | 5 mm gas motor standoff |
1 x | Metalic joint for DA-85/DA170 cilinder/elbow |
2 x | Metalic joint for DA-150 cilinder/elbow |
1 x | Metalic joint for DA-50R/DA100 cilinder/elbow |
1 x | Hexagonal Nut M1,6 (10 pcs) |
1 x | Lock nut aluminium M2 (4 pcs) |
1 x | Blue Aluminium lock nut M3 (4 pcs) |
3 x | Spinner propeller pleg. 40 mm / 6,0 mm |
1 x | Spinner propeller pleg. 45 mm / 6,0 mm |
3 x | Spinner propeller pleg. 38 mm / 5,0 mm |
1 x | P-47B Razorback WA7 2.440 mm (CY model) |
2 x | Spinner propeller pleg. 30 mm / 3,0 mm |
1 x | resin-hardener package L-385 with hardener H-385 (3.5 Kg) |
1 x | Esc X-40-SB-Pro |
1 x | Esc X-30-Pro BEC |
1 x | Propeller CFK 20x13 "white" |
1 x | Propeller CFK 18x17 |
1 x | Propeller CFK 20x13 |
2 x | Spinner propeller pleg. 38 mm/6,0 mm/0º |
1 x | Propeller CFK 15x13 Slim |
1 x | Quick hose connector 4-4 mm |
1 x | Quick hose connector 6-6 mm |
1 x | Crystal Universal RX 35.020 Ch 62 |
1 x | Crystal Universal RX 35.120 Ch 72 |
1 x | Micro Crystal RX 35.120 Ch 72 |
1 x | Crystal Universal RX 35.170 Ch 77 |
1 x | Propeller 3x3 |
1 x | Brushless ESC 30A F-450 |
1 x | Esc MasterSPIN 100 Pro |
1 x | ESC MEZON 115 Opto |
1 x | Esc X-70-SB-Pro 2-6S |
1 x | Esc MasterBasic 55SB |
1 x | Propeller CFK 18x19 |
2 x | Spinner propeller pleg. 30 mm/6,0 mm/0º |
1 x | Propeller CFK 14x8 |
1 x | Propeller RF CFK 13x6.5 |
1 x | resin-hardener package L-385 with hardener H-385 |
1 x | Propeller RF CFK 10x17 |
2 x | Spinner propeller pleg. 30 mm / 6,0 mm |
1 x | Propeller CFK 15x16 |
1 x | BOEING 727 kit |
1 x | FESTO connector M7 barb fitting 6mm |
1 x | Quick hose connector 3-3 mm |
1 x | Racor 2/3 mm |
1 x | Racor 3/3 mm |
1 x | Male connector for 12 pines AWG |
1 x | Y-Hose connector 6-6-6 mm |
1 x | Micro Switch button |
1 x | Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
1 x | BOEING 727, Jet pipe for Boeing 727 |
1 x | FESTO connector M5 Quick 6 mm |
1 x | Switc electronic 30 Amp |
1 x | Y-Hose connector 4mm |
1 x | 500 ccm gasoline fuel tank |
1 x | BALSA trip 3.0x3.0x1000 mm |
1 x | ABS tube 6.0x5.0x1000 mm |
1 x | ULTIMATUM 2.0 PRO "Full Carbon Red" |
1 x | 1.2L Kevlar tank for this mini SebArt Jet |
1 x | Propeller hub spacer 8/5.5 |
1 x | KATANA DV 20 1470 mm |
1 x | Pilatus PC-21 2100 mm BLUE/WHITE (SebArt) |
1 x | La Capitania di Venetia 1:50 |
1 x | OS 40-FG 4T Motor |
1 x | Super GALEB G-4 Red/Blue ARF 1.751 mm |
1 x | P-51D Mustang 89" Gunfinghter, Spinner Scale 2-Bl |
1 x | 6 mm hexagonal ball link M3 (10 pcs) |
1 x | PIPER CUB J-3 1/4 2640 mm (TWM) |
1 x | Indoor motor holder |
1 x | Connectors MPX black female |
1 x | DUPLEX R10 receiver REX Assist |
1 x | Receiver DUPLEX R5L EX 2.4 GHz |
1 x | DUPLEX R18 EX 2,4GHz + Rsat2 |
2 x | Hand Pads for Tray JETI |
1 x | DUPLEX Satellite receiver Rsat 900 |
1 x | DC24 II Transmitter case insert |
1 x | Battery RX JETI LiIon RB 6200 7.2v |
2 x | KAVAN Threadlocker - Blue 10ml |
1 x | KAVAN CA Activator 150ml |
2 x | Ciano KAVAN Thick 20g |
1 x | Micro Crystal RX 35.010 Ch 61 |
1 x | Crystal Universal RX 35.140 Ch 74 |
1 x | Crystal Universal RX 35.130 Ch 73 |
1 x | Motor 2212 (1000KV) Quadcopter F450 |
1 x | Crystal Universal RX 35.030 Ch 63 |
1 x | Crystal Universal RX 35.150 Ch 75 |
1 x | 1804 2400KV Brushless Motor Qav 250 mini |
1 x | Crystal Universal RX 35.020 Ch 62 |
1 x | Crystal Universal RX 35.040 Ch 64 |
1 x | Cooler motor type 300 |
1 x | Stainless steel silencer for Titan ZG38/S/SC |
1 x | 100g Flux Paste for Silver Solder |
1 x | 60 mm long Prop hub for ZG45SL, ZG62/S/SL and ZG80B |
1 x | Two-function control switch + button by FUTABA |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | A/C quality beech plywood 1520x750x4.0 mm |
1 x | 30cm Flexible Stainless Steel Exhaust Tubing D=25mm |
1 x | 3-blades 16x10 carbon prop Super Silence |
1 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
1 x | Dia. 25x20 mm tefon tube for escape |
1 x | Tygon tube 6.35 - 3.18 mm 1m |
1 x | Resistor 3W 5% OR82 |
1 x | Screw for mounting plate of DA100/120 |
1 x | Rudder 36x60 mm |
1 x | CYCLONE XT 6.2m ARF |
1 x | DC-3 Douglas (White/Blue) 1800 mm |
2 x | Round Rod 1,0x1000 mm |
1 x | RM-85FSI 4-stroke inline gasoline engine |
1 x | SF260 SIAI MARCHETTI 50E red/white (SebArt) |
1 x | YAK-23 "FLORA" (RBC Kits) |
1 x | Skyray (RBC Kits) |
1 x | Pilatus PC-21 50E, GLOW set conversion (SebArt) |
1 x | DORNIER DO 335 EP ARF 1724 mm |
1 x | Fiberglass heat shield Ø 8 mm 1000 mm |
1 x | Stainess steel exhaust flange for ZG20 / ZG22 / ZG23/ ZG26 / G23 |
1 x | Round flex hinge (12 uds) |
1 x | Peel ply 100 g/m² (plain weave) 50 cm x 2m |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch |
1 x | DA-50 Carburator |
1 x | SUPER CUB 2640 mm |
1 x | PIPER CUB 3000 mm (TWM) |
1 x | Horns indoor |
1 x | 54 mm Futaba servo arm tandem with ball link |
1 x | Futaba 24/30 mm servo pull-pull double arm with ball link |
1 x | Servo safety connector (10 pcs) |
1 x | Clippe Wing Cub 3050 mm Blue 85cc |
1 x | XTorque CFK Servohebel 38 HITEC 25T |
1 x | Indoor landing gear set |
1 x | Horizontal servo holder |
1 x | RH long aluminium horn (2pcs) |
1 x | Emisora JETI Duplex DS-12 EX Special Edition "Carbon Purple" |
1 x | DUPLEX R12 EPC receiver 2,4GHz |
1 x | RC Power Switch 5A |
1 x | Receiver DUPLEX R3L EX 2.4 GHz |
1 x | Emisora JETI Duplex DS-16 II SILVER Multimode |
1 x | OPTIC 8 opto Rx-servo insulation |
1 x | JETI SPIN 80 Pro |
1 x | DUPLEX R7 REX receiver 2,4GHz |
1 x | Black tray 2,4EX DC-16/14/24 black |
1 x | Jeti SPIN 66 Pro |
1 x | Jeti Spin 220 Pro OPTO |
1 x | DUPLEX 2,4EX Stick with 3-Position Switch for Transmitter DC/DS |
1 x | DUPLEX R6 receiver REX Assist |
1 x | Emisora JETI Duplex DS-16 II BLACK Multimode |
1 x | DUPLEX USB Adapter |
1 x | Jeti Spin 22 |
1 x | switch 1-Spring-UP 3-position DC Tx DUPLEX 2,4EX |
1 x | Emisora JETI Duplex DS-16 II Carbon Line RED |
1 x | Receiver DUPLEX R4H EX 2.4 GHz |
1 x | MAX BEC 2 |
1 x | switch short 3-position DC Tx DUPLEX 2,4EX |
3 x | Debonder CA 20g |
1 x | Cooler motor type 280 |
1 x | XH female balance (6S) connector (2 pcs) |
1 x | Silicone black 1,5 qmm wire ( 1 m) |
1 x | Pan Head Screw M1,6x6 (10 pcs) |
1 x | Pan Head Screw M2x8 PH |
1 x | Silicone black 1,0 qmm wire ( 25 m) |
1 x | Nut for mounting M5 (4 pcs) |
1 x | Spinner propeller pleg. 38 mm/6,0 mm/5º |
2 x | Fokker D-VIII 2090 mm R/W (CY model) |
1 x | Spinner propeller pleg. 30 mm / 5,0 mm |
1 x | Fokker D-VIII 2090 mm G/Y (CY model) |
1 x | LA-7 Lavochkin 2314 mm (CY model), Wheels and le |
1 x | Cessna 310 Red #G-BBBX 3200 mm (CY MODEL) |
1 x | FW-190 2400mm Electric Landing gear complet (CY model), |
1 x | Fiberglass heat shield Ø 6 mm 1000 mm |
1 x | Dia. 25x5 mm tefon tube for escape |
1 x | 50cm Flexible Stainless Steel Exhaust Tubing D=25mm |
1 x | Captador OS GT 33 cc |
1 x | Giant Scale Muffler SLIMLINE D.A. 100 (2pcs) |
1 x | Wheel FEMA 70 mm / 5 mm |
1 x | Oratex Natural White 20m |
1 x | Propeller 9x7 SlowFlyer |
1 x | Oracover Yellow CUB 10 m |
1 x | Propeller 8x4 Electric |
1 x | Oracover Black 10 m |
1 x | Ciano KAVAN Thin 20g |
1 x | Ciano KAVAN Super Thin 20g |
1 x | Piston pin for DA-60 DA-120 |
1 x | Nut for mounting M2,5 (4 pcs) |
1 x | Spinner propeller pleg. 32 mm / 5,0 mm |
1 x | Spinner propeller pleg. 42 mm / 6,0 mm |
1 x | Bucker Bu-133 Jungmeister #1 2540 mm ( CY Model) |
1 x | JEEMO Kit ARF Basic (2 color Carbon finish) XTRALIGHT |
1 x | Dia. 28x15 mm PTFE tube for escape |
1 x | Foam air filter Ø 48 mm, blue |
1 x | COMFORT MOUNT ø 25 mm |
1 x | Captador RCEXL para DA |
1 x | Ciano KAVAN Medium 20g |
1 x | Piñon motor rotor LA-500 |
1 x | Propeller RF CFK 16x8,5 S |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | Round Rod 4,0x1000 mm |
1 x | Nut for mounting M3 (4 pcs) |
1 x | Black silicone 1,0 qmm wire (50 m) |
1 x | Screw M2.5x8 (10 pcs) |
1 x | Nylon Screw M6x40 |
1 x | Silicone black 4,0 qmm wire (25 m) |
1 x | Silicone red 2,5 qmm wire ( 25 m) |
1 x | Spinner propeller pleg. 36 mm / 6,0 mm |
1 x | Spinner propeller pleg. 36 mm/6,0 mm/5º |
1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
1 x | Spinner propeller pleg. 32 mm / 6,0 mm |
1 x | Spinner propeller pleg. 42 mm/6,0 mm/0º |
![](images/pixel_black.gif) |
605,525.33EUR |