74.90EUR

DSM 10 Dual Switch Mixer
[JETIDSM10]

JETI DSM 10 Dual Switch Mixer.

DSM 10 is an electronic switch for switching of two receiver batteries which are connected to one receiver. The product also includes a receiver current supply switch. Batteries that are connected to the inputs of the DSM 10 are permanently measured and connected with the aid of a hysteresis comparator either both to the output, or one of both batteries with the higher voltage only.
The DSM 10 exit consists of a MPX connector which can be used for direct connection of the exit to the receiver. The MPX connector is a fixed part of Duplex receivers with the label EPC (External Power Connector), receivers R14 and R18.
The DSM 10 is not equipped with a voltage stabilizing circuit for the connected batteries. The voltage at the DSM 10 output will always be equal to the voltage of the connected battery with the higher voltage. Make sure that receiver, servos and other equippment supplied by the DSM 10 are designed for the given voltage.
The DSM 10 is controlled by a magnetic switch which can be placed outside of the model airplane fuselage. By touching with a special magnet, the system becomes switched on or off. The electronic switch in switched on state is characterized by a minimum transitional resistance.

Weight [g] 24
Dimensions [mm] 38 x 20 x 7
Sustained current [A] 10
Operational temperature [°C] -20 ... 85
Recommended input voltage [V] 5 ... 8,4
Idle current [µA] 130
Number of battery inputs 2
Input voltage max. [V] 13
Peak current (max 5s) [A] 20

under request

Reviews

Quick Find

Shopping Cart

2 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	TP/TopFuel - XH 2/3S Adapter
1 x	Adapter lead MPX/EC3
1 x	CC 03
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	Cabel charger transmitter GRAUPNER
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	TrainerCord (master-learner)
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	Bec MR UBEC 5A (5v/6v/7v)
2 x	2 LiPo XH>EH adapter
1 x	Futaba External voltage input cable Futaba CA-RVIN-700
2 x	30 cm BEC cable (female)
2 x	30 cm BEC cable (male)
2 x	Big-Malibu XL Roof box with surfboard rack GREY
1 x	5 LiPo XH>EH adapter
1 x	BEC 3A FOXY
1 x	Copper lacquer wire Ø0,2 mm (5 m)
2 x	JETImodel SINGLE BEC
1 x	USB HLS prog. interface
2 x	Circlick securite
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	Dean "T" - Futaba Adapter
2 x	BALSA triangular 8x8x1000 mm
1 x	BALSA leading edge 8x10x1000 mm
1 x	Aluminium rod Ø 4.0 mm x 3000 mm
1 x	BALSA triangular 6x6x1000 mm
1 x	BALSA triangular 15x15x1000 mm
1 x	BALSA trip 10x10x1000 mm
1 x	Straightened rod Ø 3.0 mm x 1000 mm
1 x	Pine wood slat 1.5x3.0x1000 mm
2 x	Liston HAYA 8 x 8 x 1000 mm
2 x	Beech dowels 2.0 x 1000 mm
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
1 x	Straightened rod Ø 0.8 mm x 1000 mm
1 x	BALSA trip 6.0x6.0x1000 mm
2 x	Linden wood slat 2.0x2.0x1000 mm
1 x	Pine wood slat 3.0x5.0x1000 mm
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	Pine wood slat 3.0x10.0x1000 mm
1 x	Set cintas unión paracaídas 145 cm
1 x	Para-RC Trike "RC-Bullix"
2 x	Opale Rucksack
1 x	Para-RC Mix
1 x	PPM Encoder Module
1 x	Strip 2,5x1,25x330 mm
1 x	ABS Strip 1.5x6.0x1000 mm
1 x	ABS I Strip 10x5x1000 mm
1 x	Round Rod 4,0x1000 mm
2 x	Strip 2,0x2,0x330 mm
1 x	ABS Strip 1.5x2.0x1000 mm
2 x	ABS Strip 1.5x4.0x1000 mm
2 x	Round Rod 1,0x1000 mm
2 x	ABS I Strip 20x10x1000 mm
1 x	Round Rod 2,0x1000 mm
1 x	Strip ABS 2.0x5.0x1000 mm
2 x	ABS Strip 1.0x2.0x1000 mm
1 x	Round Rod 2,5x1000 mm
1 x	Strip ABS 2.0x10.0x1000 mm
1 x	Round Rod 1,25x1000 mm
1 x	Digital precision scale up to 2000 g
1 x
1 x	1,5x50 mm allen screwdriver
1 x	Ball Link Plier
1 x	Screwdriver for Hexagon 1,27mm
1 x	Vacuum pump 12 CFM
1 x	3,0x60 mm allen screwdriver
1 x	Crimping tool
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x	Starter Sullivan-STAR 603 DINATRON
1 x	Crimping tool
1 x	Vacuum pump P1-N
1 x	Starter 12v (Max 180 and 30ccm)
1 x	Screwdriver for Torx® TX6
1 x	2,5x60 mm allen screwdriver
1 x	Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x	Hot Glue Stick RED
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x	2,0x50 mm allen screwdriver
1 x	Digital scale up to 40 kg
1 x	PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x	Hot Glue Stick BLACK
1 x	Dust collector for mould cleaning
1 x	Disposable Injector Bags (30x16cm) 100 pcs
1 x	Screwdriver for Hexagon 1,5mm
1 x	Ball Link Plier
1 x	Starter EM Gear Power 250
1 x	Fibra de vidrio 80 g/m² (2 m x 100 cm)
1 x	100m servo "Premium" wire (white/red/blue)
1 x	Brass control horn M4 short for wire (4 pcs)
1 x	Oratex Silver 2m
1 x	Carbon fiber rod 0.8 mmx1000 mm
1 x	Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x	Spray adhesive INFUTAC (Clear) 500 ml
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	Opto Gas Engine Kill Switch
1 x	Extension 5 lipos JST/C - JST
1 x	Opto Gas Engine Kill Switch
1 x	PSC 5
1 x	wing/fuselage connector for 16 pines AWG 20-24
1 x	Male/Female prolonguer for Balancer Thunder Power 6S
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	TP/TopFuel - JST-EH 4/5S Adapter
1 x	Male Prolonger TP 4/5S
1 x	PSC 6
1 x	Connector Sub-D 2+5 Female
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x	Round Rod 6,0x1000 mm
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	Liston HAYA 3 x 10 x 1000 mm
1 x	Mahogany wood slat 1.5x1.5x1000 mm
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	Birch plywood plate 600x300x2.5 mm
1 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	Pine wood slat 3.0x7.0x1000 mm
1 x	MAX pilot ARTF
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x	Balsa panel 1.5x100x1000 mm
1 x	Liston HAYA 10 x 10 x 1000 mm
1 x	BALSA triangular 10x10x1000 mm
1 x	Birch plywood plate 600x300x4.0 mm
1 x	Aramid 50 daN 50 m
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	Balsa panel 3.0x100x1000 mm
1 x	Balsa panel 10x100x1000 mm
1 x	Rescue 1,8m2 / BackPack
1 x	A/C quality beech plywood 1520x750x4.0 mm
1 x	Parachute P4
1 x	Pine wood slat 6.0x6.0x1000 mm
1 x	Beech dowels 3.0 x 1000 mm
1 x	Wing OXY 5,0 m2
1 x	Lite Plywood panel 600x300x2.0 mm
1 x	BALSA trip 3.0x5.0x1000 mm
1 x	ABS Strip 1.5x3.0x1000 mm
1 x	ABS Strip 1.0x5.0x1000 mm
1 x	Spinner Alumin. propeller pleg. 30 mm / 4,0 mm
1 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	Soldering PCBs 8pin, 5 pieces
1 x	Jeti Black cap
1 x	Round Rod 5,0x1000 mm
1 x	Spinner Alumin. propeller pleg. 30 mm / 3,2 mm
1 x	Round Rod 1,5x1000 mm
1 x	ABS Strip 1.0x4.0x1000 mm
1 x	Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs
1 x	Tachometer HANGAR 9 digital
1 x	Z Bender - S Type Tool
1 x	Tool for entel
1 x	ABS Strip 1.0x3.0x1000 mm
1 x	Heli blades angle measurer
1 x	PROXXON - SAW BLADE DIAMOND OZI/E
1 x	Fresa corte diamante Ø 2.3mm (bola)
1 x	Truck-trailer for gliders 720 x 285 mm
1 x	Spring clamp for tube Ø29 mm ext 1pc
1 x	DUPLEX 2.4EX Central Box 210
1 x	DUPLEX 2.4EX MSpeed PITOT <300 Km/h
1 x	Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR)
1 x	Hand Pads for Tray JETI
1 x	USB Interface REVOLECTRIX for CellPRO 10s
1 x	18 mm wing servo holder
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	Bidule 111 3000 mm
1 x	ARTIST 1.560 mm
1 x	Albatros ,spare fuselage (Top Model)
1 x	ALBATROS 3.0 m (orange/white)
1 x	Battery RX JETI LiIon RB 2600 7.2v
1 x	DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch
1 x	DUPLEX 2,4EX Brackets for Transmitter DC/DS
1 x	DUPLEX 2.4EX MT 300 EX
1 x	DUPLEX 2.4EX MULi 6s M
1 x	PPM to Jack link - Tx Black (mono) DC/DS Tx DUPLEX 2,4EX
1 x	DSM 10 Dual Switch Mixer
1 x	DUPLEX 2.4 EX MVario2
1 x	MR30 connector female
1 x	Battery RX JETI LiIon RB 6200 7.2v
1 x	DUPLEX 2.4EX RC Power Switch 10
1 x	Teacher / Student Cable
1 x	DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch
1 x	Neck strap JETI DC
1 x	DUPLEX 2.4EX MFlow2 Gas 800
1 x	AddCAP 10AS capacitors
1 x	DUPLEX 2,4GHz MRPM-AC EX
1 x	DUPLEX 2.4EX MUI 75

11,023.76EUR