52.90EUR

DUPLEX 2.4EX MUI 150 Sensor
[HK80001304]

Description:
Voltage and current sensor Jeti MUI150 (up to 150A) for Jeti Duplex system 2.4EX.

Assignment of the MUI EX sensor is measurement of voltage, current, and consumed capacity of flight batteries in the model. The wireless data transmission by the DUPLEX 2,4GHz system is monitored by the JETIBOX terminal.

For communication purposes the Duplex system takes advantage of the 2,4 GHz band which, besides sending remote control data to the model, also receives data from the model back to the transmitter. During a flight, obtained telemetric data are transmitted in real time and the actual values of the measured data can be displayed on the JETIBOX LCD. Telemetric MUI sensors execute voltage and current measurements in your model and transmit these informations with the aid of the DUPLEX system (receivers and transmitter modules). Thanks to exact current measurements these sensors make it possible to trace the spent capacity of the measured battery. The MUI unit is recording the spent current flow time and its average as well as maximum value. Furthermore it offers exact voltage measurements and recordings of voltage minimum and maximum values.

The task of parameter adjustment and measured data setup is performed by the well known talent – the JETIBOX terminal.

MUI sensors allow setting of acoustical signals in order to announce violation of set parameters. Such alarms may be set for measuremets of maximum current and minimum voltage as well as for a maximum of consumed battery capacity. The sound signal is generated by a siren integrated in the transmitter module. For better differentiation the particular alarms are distinguished by Morse alphabetic letters. The acoustical alarm generation in case of parameter violation is working even if the JETIBOX is not connected. With the JETIBOX in place, the LCD display shows which parameter has been violated. In case of violation of several parameters the alerts alter consecutively as well as the indications on the LCD display.

Specificationes:
- Operating Voltage: 5-8.4 V
- Power consumption approx.: 24 mA
- Dimensions approx.: 29x19x11 mm
- Weight approx.: 21 gr
- Voltage measuring range: 0 - 60 V
- Current measuring range: 0 - 150 A
- Accuracy of current/voltage: 1%/0.1%
- Operating temperature: -10 °C - 85 °C

under request

Reviews

Customers who bought this product also purchased

Propeller Pleg CAM Carbon 15x10

under request

Propeller Pleg CAM Carbon 16x13

under request

Quick Find

Shopping Cart

2 x	Optical RPM Sensor
1 x	GPS Logger Dymond
1 x	SE Ring 350 mm (2 pcs)
1 x	SE Ring 330 mm (4 pcs)
3 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	20x200 mm battery rings
2 x	Ring 320 mm length (5 pcs)
2 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Tape GFK 25 mm
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	20x1000 mm Ring Strap Back To Back
2 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	SE Ring 360 mm (2 pcs)
2 x
1 x	SE Ring 480 mm (2 pcs)
2 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	Spikes Band (5 m)
1 x	Parachute PV6 for F3J
2 x	Mahogany wood slat 1.5x1.5x1000 mm
2 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	Linden wood slat 2.0x2.0x1000 mm
3 x	Set cintas unión paracaídas 145 cm
1 x	Liston HAYA 3 x 10 x 1000 mm
1 x	Aramid 50 daN 50 m
2 x	Liston HAYA 8 x 8 x 1000 mm
1 x	BALSA triangular 15x15x1000 mm
1 x	Trike XL motor set (motor+esc+prop)
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	BALSA triangular 8x8x1000 mm
1 x	BALSA trip 6.0x6.0x1000 mm
1 x	BALSA trip 8.0x8.0x1000 mm
1 x	Pine wood slat 3.0x10.0x1000 mm
1 x	Paramotor Trike XL
1 x	Paramotor BackPack XXS (without accessories)
2 x	Para-RC Mix
2 x	Parachute BACKUP X100
1 x	Beech dowels 4.0 x 1000 mm
1 x	Beech dowels 2.0 x 1000 mm
2 x	Pine wood slat 2.0x2.0x1000 mm
2 x	Pine wood slat 6.0x6.0x1000 mm
2 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	Beech dowels 3.0 x 1000 mm
1 x	Walnut wood slat 3.0x3.0x1000 mm
2 x	BALSA triangular 10x10x1000 mm
1 x	LUCAS pilot ARTF
1 x	Opale Rucksack
1 x	Windsock Ozone L -1200 mm
1 x	Paramotor BackPack XXS 2
2 x	Jeti Black cap
1 x	Pine wood slat 5.0x5.0x1000 mm
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	OBECHI sheet 2.0x3.0x1000 mm
1 x	Squared carbon wing joinner 5x5x220 mm
1 x	Carbon fiber rod 2.5 mmx1000 mm
1 x	Carbon fiber flat 1000x3.0x0.5 mm
1 x	Carbon fiber rod 2.0 mmx1000 mm
1 x	Carbon fiber rod 3.0 mm x 1000 mm
1 x	Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
2 x	Carbon fiber rod 4.0 mmx1000 mm
1 x	Carbon fiber rod 16 mm x 1000 mm
1 x	Carbon fiber rod 1.5 mm x 1000 mm
2 x	Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x	Carbon fiber rod 0.8 mmx1000 mm
1 x	Carbon fiber rod 20 mmx1000 mm
1 x	Carbon fiber flat 1000x3.0x0.13 mm
1 x	PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m)
1 x	Ferrita 27x14x7 mm
1 x	Brass hexagonal rod Ø 3 mm x 1000 mm
1 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	"S" set for boats
1 x	Remote electric ignition system
1 x	Hot Glue Stick RED
1 x	Locking cable tie 4.6x203 (uds)
1 x	Starter Sullivan-STAR 601
1 x	Z Bender - S Type Tool
1 x	Conector AS150 7mm antichispazo (Set: 2 pares)
1 x	Screwdriver for Torx® TX8
1 x	Support FUEL DOT V3
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
2 x	Seoul Power LED 3 watts PCB Sets: 1x white, 1x red, 1x green
1 x	Carbon fiber rod 1.0 mm x 1000 mm
1 x	LED lighting system High Power
1 x	F450/550 Quadcopter, landing gear
1 x	Spare Part Frame Set for EACHINE RACER 250
2 x	T-Motor U7-V2.0 Kv420
1 x	1804 2400KV Brushless Motor Qav 250 mini
1 x	DYNAMOMETER S-1580
1 x	Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CCW th
3 x	MEKP Harderner 100 g
3 x	resin-hardener L-385 H-385 (5000 g)
1 x	2 piece mounting frame Battery 3200 / 4000
1 x	Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
2 x	800TVL CMOS camera for FPV
2 x	Hardener P-25, canister 2.5Kg
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 675g
2 x	Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs
2 x	resin-hardener L-385 H-385 (625 g)
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Epoxy Resin L + Hardener CL (60 min) kit/ 930 g
1 x	Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg
1 x	External LED's (2 pcs)
1 x	30 cm DEANS female connector
1 x	Adapter lead MPX/EC3
2 x	ESC ALPHA 60A HV
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	Crimping tool
1 x	1 m servo "Premium" wire (white/red/blue)
1 x	Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
1 x	50m servo "Premium" wire (white/red/blue)
1 x	Wing OXY 0,5 pulgadas2
2 x	Birch plywood plate 600x300x3.0 mm
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	Balsa panel 5.0x100x1000 mm
1 x	Birch plywood plate 600x300x4.0 mm
1 x	Lite Plywood panel 600x300x3.0 mm
1 x	Beech dowels 10 mm x 1000 mm
1 x	BALSA triangular 6x6x1000 mm
1 x	Wing OXY 5,0 m2
1 x	Ballast 700gr OPALE
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x	Soporte grifo FESTO (2 pcs)
1 x	Support Filtro FESTO
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Pasacables rectangular 40x15 mm (4 pcs)
1 x	Support Flush MPX Conector (6 pcs)
1 x	Combo lighting module with covering drop shape
1 x
1 x	TRAINER RC Pilot V2 90" w/r ARF
1 x	CARBON CUB FX-3 100-200CC ARF, 165" - 4200 mm (Hangar9)
1 x	PARAGON Trainer 46-55 1580 mm
1 x	Servo Mount M (blue)
1 x	Blue aluminium servo arm V1-Hitec 1,0" inch M2
1 x	Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x	Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g
1 x	Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor)
1 x	Motor GAUI F-50R (rear intake)
1 x	DUPLEX 2.4EX MUI 150 Sensor
1 x	Winter-Glove DS tx
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
2 x	Hardener Aero EPH 161 (250 g)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
2 x	Quadcopter Q50 Kit Carbon Fiber
1 x	AXI 2204 Multicopter
1 x	Combustible Glow "KAVAN" air/heli 10% nitro
1 x	Aluminium red ball links M3 V1 (10 pcs)
1 x	Marker ties (20 pcs)
1 x	Aluminium cap bolt washer M4 blue (8 pcs)
1 x	Blue aluminium servo arm V1-Hitec 1,25" inch M3
1 x	Red aluminium servo arm V1-Futaba 15 mm iM2
1 x	Brass ball links BS M3 V1 (10 pcs)
1 x	Blue aluminium servo arm V1-Hitec 1,5" inch M3
1 x	Ball link duraluminium M3 V1 (10 pcs)
1 x	Red aluminium servo arm V1-Futaba 23 mm M2
1 x	Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg
2 x	resin-hardener L-385 H-385 (1250 g)
1 x	Mould Resin P 10 kg
1 x	USB Mini Camera endoscope
1 x	Mould Resin P + Hardener EPH 161-P, kit/ 585 g
1 x	Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg
1 x	resin-hardener package L-385 with hardener H-385 (3.5 Kg)
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg
2 x	Hardener Aero EPH 161 (500 g)
1 x	SAVOX SH 0254 servo
1 x	resin-hardener package L-385 with hardener H-385 (875 g)
1 x	resin-hardener package L-385 with hardener H-385
1 x	Savox HV Brushless Servo SB-2270SG (Swashplate)
1 x	Servo Arm aluminium ALU-STAR
1 x	DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch
1 x	DUPLEX 2.4EX MT 300 EX

14,591.61EUR