534.01EUR

DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch
[JETCB3202+]

JETI DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch

Product description and features
The Central Box 320 is designed for a complete management of multiple servos and two receiver batteries for a model with high security requirements.The Central Box 320 has an overload protection on each servo output, 8 channels for high-performance servos up to 60 kg / cm and 10 channels for standard servos up to 30 kg / cm. Especially for the use of powerful and power-hungry servos, the Central Box 320 has an aluminum housing for better cooling. The Central Box 320 offers true battery redundancy, DITEX servo telemetry, JETI EX telemetry and up to three receiver inputs (2x 2.4GHz and 1x 900MHz) for full power and RF signal redundancy.

Configuration via JETI Duplex DS/DC transmitters
With JETI Duplex DC/DS transmitters, the full potential of the Central Box 320 can be fully exploited. The device overview of the JETI Duplex DS/DC transmitter makes it easy to perform the entire configuration of the servo outputs, DITEX servo and JETI EX telemetry, function assignment, and more.

Compatibility with Futaba
The Central Box 320 can also be used with two S.Bus receivers (e .g Futaba R7003SB). Setting up and reading out the telemetry values must, however, be realized with a separatly available JETIBOX.

Switching on and off
The switching on and off process of the Central Box 320 is done with the supplied R/C switch.

Recommended receivers
Two compatible RSat2 receivers are included. Optionally, the use of a REX Assist receiver in combination with a RSat2 receiver is possible, so you get a Central Box with gyro stabilization.

Features
Adjustable powerful BEC for voltage stabilization (connection of standard or HV servos)
DITEX servo telemetry support
Possibility to connect up to 3 receivers with serial communication
built-in Expander function with the possibility of independent connection of up to four JETI EX sensors
Input for magnetic switch or RC switch
Power supply batteries connected via MPX connector
100Hz mode of servo outputs (10ms period)
EX telemetry support (measurement of voltage, current, capacity, temperature, etc.)
Easy settings changes via DC/DS transmitter („Device explorer“)
Robust metal construction with mounting holes

temporarily out of stock

Reviews

Quick Find

Shopping Cart

3 x	Propeller 3x2
1 x	Propeller 10x4,7 SlowFlyer
1 x	Extinguisher CO2 - 2 Kg
2 x	Foam wheel Ø 351 mm (2 pcs)
1 x	Cooler motor type 300
2 x	Xplorer2 anemometro
1 x	76 mm light wheels (2 pcs)
1 x	Xplorer3 anemometro
1 x	Xplorer1 anemometro
1 x	Cooler motor type 150
2 x	Cooler motor type 400
1 x	Propeller 11x4,7 SlowFlyer
1 x	Foam wheel Ø 38 mm (2 pcs)
1 x	Propeller 9x4,7 SlowFlyer
2 x	Retract undercarriage
3 x	Reductora IPS 150 DX2BB-FXCS 11,8:1
1 x	Reductora IPS 150 DX2BB-CXCS 8,6:1
3 x	Propeller 9x7 SlowFlyer
1 x	Reductora IPS 150 DX2BB-BXCS 7:1
2 x	Xplorer4 anemometro
2 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	20x200 mm battery rings
2 x	Marker ties (20 pcs)
2 x	SE Ring 450 mm (2 pcs)
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
3 x	SE Ring 300 mm (2 pcs)
2 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
3 x	14x60 mm Mini rings Tie Wraps (4 pcs)
2 x	SE Ring 360 mm (2 pcs)
1 x	Tape GFK 38 mm
2 x	Tape GFK 25 mm
3 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
3 x	Tape GFK 50 mm
2 x	Ring 320 mm length (5 pcs)
4 x	SE Ring HACKER 300 mm (2 pcs)
3 x	SE Ring 330 mm (4 pcs)
1 x	SE Ring 400 mm (2 pcs)
2 x	Propeller 8x4,3 SlowFlyer
1 x	Extension PVC 150 cm (Graupner)
1 x	Futaba male 40 cm extension
1 x	Cabel "Y" 15 cm
1 x	Extension silicon 10 cm (Futaba)
1 x	Cable silicona female batt. receptor 30 cm (Futaba)
1 x	Extension lead 15 cm Multiplex
1 x	Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x	Extension silicon 30 cm female (Futaba)
1 x	Extension 100 cm (Futaba)
1 x	Prolongador S-Bus JR/JR 20cm
1 x	Cable S.BUS 3 salidas 300 mm
1 x	Extension silicon 100 cm (Graupner)
1 x	Extension silicon 10 cm (Graupner)
1 x	Extension silicon 30 cm female (Graupner)
1 x	Circlick securite
1 x	"M" set
1 x	Propeller APC 10x3,8 SF
1 x	Propeller APC 12x8 Electric
1 x	Starter EM Gear Power 80
1 x	Monokote BLANCO jet (1.8x0.65m)
1 x	Adapter rotula M3
1 x	Horizontal mounting servo holder
2 x	ALU servo arm 90º 3 mm shaft
1 x	Servo Tester
1 x	HITEC DPC-11 programmer
1 x	Reductora IPS dual-motor 10,7:1 with spinner
1 x	Double aluminium servo arm V1-Hitec 2,5 inch M3 (blue)
1 x	Gold aluminium double servo arm V3-JR 3.5 inch M3
1 x	Programador FUTABA USB CIU-3
1 x	Blue aluminium servo arm V2-Hitec 2,0 inch M3
1 x	Red aluminium double servo arm FUTABA 40 mm M3 F3A
1 x	Fast attachment for servos (25 pcs)
1 x	40 mm servo arm with bearing (2 pcs)
3 x	Spikes Band (5 m)
1 x	Hitec 20 mm servo arm
1 x	Spring Clip Ø25 mm
1 x	Junta humo metalica G30 (DLE30/DLE60)
1 x	Junta humo metalica G85 (DLE85/DLE170)
1 x	O-ring Saito FG-73 5cyl
1 x	FIALA Propeller 23x8 Electric
1 x	Compact Pitts Muffler OS MAX.35.40 FP
1 x	Spring clamp for tube Ø29 mm ext 1pc
2 x	Reductora IPS 150 DX2BB-DXCS 9,7:1
1 x	FIALA Propeller 19x12 Electric
1 x	Ventus 1:4 set of instruments
2 x
1 x	ABS tube 7.0x5.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x	2,3 mm Prop Adapter M5
1 x	Waterproof adhesive tape, width 19mm, length 25m
2 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	120x60 mm SLH KOVO wheel
2 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	6 mm hexagonal ball link M3 (10 pcs)
1 x	BALSA trip 8.0x8.0x1000 mm
1 x	Balsa panel 2.5x100x1000 mm
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	ALU double servo arm 3 mm shaft
1 x	Servo AN-8 HBA
1 x	Savox Brushless Servo SC-1251 MG
1 x	Servo mounting frame SV-1260MG
1 x	SLICK 360-A 104" (2640 mm)
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Balsa panel 1.0x100x1000 mm
1 x	Pin hinge 26x11 mm (10 uds)
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	Cooler motor type 280
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	Flap hinge (6 pcs)
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	15 mm reinforced hinge
1 x	Balsa panel 4.0x100x1000 mm
1 x	Large flex hinge (12 uds)
1 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	18 mm reinforced hinge
1 x	ALU servo arm 3 mm shaft
1 x	Servo SAVOX SA-1256 TG
1 x	Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor)
1 x	Servo SAVOX SA-128S SG
1 x	Servoarm SH-81, two sides, aluminium
1 x	Servo SAVOX SV-1254 MG HiVolt Low Profile
2 x	SAVOX SH 1250 MG servo digi
1 x	Servo SAVOX SH 0257 MG
1 x	SAVOX SH 0254 servo
1 x	Servo SAVOX SW-1250 MG digi
1 x	Servo SAVOX SV-1273 TG
1 x	Servo SAVOX SV-1260 MG
1 x	Servo SAVOX SB-2290 SG
1 x	Servoarm Aluminium SH-82
1 x	PIX Hawk with accesories
1 x	Savox HV Brushless Servo SB-2270SG (Swashplate)
1 x	SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm
1 x	EXTRA NG 74" white/red/blue (Skywing RC)
1 x	50 mm servo arm with bearing (2 pcs)
1 x	ABS tube 6.0x4.0x1000 mm
1 x	SE Ring 480 mm (2 pcs)
1 x	SE Ring 250 mm (2 pcs)
1 x	Servo HITEC D145 SW
1 x	Servo HITEC HS-225 BB
1 x	Servo lock HS-80/81/82/85 (2 pcs)
1 x	10-15mm Servo Arm
1 x	SERVO DES 658 BB MG
1 x	SERVO DES 806 Pignons
1 x	PT 21x13 EL Propeller 3 Blade
1 x	Epoxy MID-CURE™ 15 min (130g)
1 x	Ball joint long
1 x	DUPLEX 2.4EX Expander E2
1 x	DUPLEX 2.4EX Satellite receiver Rsat 2
1 x	DSM 10 Dual Switch Mixer
1 x	BALSA trip 6.0x6.0x1000 mm
1 x	Gearbox KPG27/28 4,7:1pinion
1 x	Giant Scale Muffler D.A. 70
1 x	Adapter FUN 400/480
1 x	Fuel station 20L incl. pump electric
1 x	DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch
1 x	GPS, Vario and altitude Sensor SBS-01G
1 x	Servo case HS-225MG/225BB/5245MG
1 x	Servo HITEC D131 MW nano
1 x	Servo HITEC HS-5084 MG
1 x	Propeller FIALA 15x8 3-Blade
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	SERVO DES 588 BB MG
1 x	SERVO DES 806 Pignons
1 x	SERVO DES 568 MG
1 x	Soporte metal para servos
1 x	Extender tip (6 pcs)
1 x	Thread locker IC-Loc™ red "high" 10 ml
1 x	Complet landing gear
1 x	Steering lever
1 x	Blade holder center
1 x	DUPLEX 2.4EX Central Box 220 + 2x Rsat2
1 x	Piñones SAVOX SH-0350
1 x	Servo SAVOX SV-1261 MG
1 x	Gates hinge black 30x16 mm (2 pcs)
1 x	25 mm reinforced hinge
1 x	Gates hinge aluminium (1 pcs)
1 x	Small pinned hinge (12 uds)
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	Big-Malibu XL Roof box with surfboard rack GREY
1 x	LiPo Storage Box Standard 1 Type 1
1 x	Futaba Multi-Switch-Prop 12+2 DECODER
1 x	Battery Protection Circuit Board 22.2v 6s
1 x	Battery LiFe TopFuel 3100 mAh 4s MTAG 30C
1 x	METEOR 1.000 mm kit

10,835.67EUR