398.99EUR

DUPLEX 2.4EX Central Box 320
[JETCB320]

JETI Duplex 2.4EX Central Box 320

Product description and features
The Central Box 320 is designed for a complete management of multiple servos and two receiver batteries for a model with high security requirements. The Central Box 320 has an overload protection on each servo output, 8 channels for high-performance servos up to 60 kg / cm and 10 channels for standard servos up to 30 kg / cm. Especially for the use of powerful and power-hungry servos, the Central Box 320 has an aluminum housing for better cooling. The Central Box 320 offers true battery redundancy, DITEX servo telemetry, JETI EX telemetry and up to three receiver inputs (2x 2.4GHz and 1x 900MHz) for full power and RF signal redundancy.
Configuration via JETI Duplex DS/DC transmitters
With JETI Duplex DC/DS transmitters, the full potential of the Central Box 320 can be fully exploited. The device overview of the JETI Duplex DS/DC transmitter makes it easy to perform the entire configuration of the servo outputs, DITEX servo and JETI EX telemetry, function assignment, and more.

Compatibility with Futaba
The Central Box 320 can also be used with two S.Bus receivers (e .g Futaba R7003SB). Setting up and reading out the telemetry values must, however, be realized with a separatly available JETIBOX.
Switching on and off
The switching on and off process of the Central Box 320 is done with the supplied magnetic switch.
Recommended receivers
As receiver e. g. 2 RSat2 or REX3 receivers can be used. Optionally, the use of a REX Assist receiver in combination with a RSat2 receiver is possible, so you get a Central Box with gyro stabilization.

Features
Adjustable powerful BEC for voltage stabilization (connection of standard or HV servos)
DITEX servo telemetry support
Possibility to connect up to 3 receivers with serial communication
built-in Expander function with the possibility of independent connection of up to four JETI EX sensors
Input for magnetic switch or RC switch
Power supply batteries connected via MPX connector
100Hz mode of servo outputs (10ms period)
EX telemetry support (measurement of voltage, current, capacity, temperature, etc.)
Easy settings changes via DC/DS transmitter („Device explorer“)
Robust metal construction with mounting holes

temporarily out of stock

Reviews

Quick Find

Shopping Cart

1 x	Remote electric ignition system
1 x	Red smoke canister 140 g
1 x	Electric rocket starters (6 pcs)
1 x	Yellow smoke canister 100 g
1 x	White smoke bombs AX-3 (10 pcs)
1 x	Smoke set "S"
1 x	White smoke bombs AX-9 (10 pcs)
1 x	Green smoke canister 65 g
1 x	Parachute expulsion foam
1 x	White smoke canister 140 g
1 x	Red smoke canister 65 g
1 x	White smoke bombs AX-60 (5 pcs)
1 x	PCARD Wireless System
2 x	3l Smoke oil
1 x	White smoke bombs AX-18 (5 pcs)
1 x	B4-0 rocket charges (6 pcs)
1 x	Black smoke bombs AX-60 (5 pcs)
2 x	White smoke canister 100 g
1 x	Parachutist
1 x	"S" set for planes
1 x	Blue smoke canister 140 g
1 x	Yellow smoke canister 65 g
1 x	1/4 Pilot "Mike"
1 x	1/10 Pilot "Jack"
3 x	Pilot "Adolf" Legends Series (Slimline)
2 x	Civilian pilot "Pamela" size 9cm (Slimline)
2 x	Civilian pilot "Curt" size 9cm (Slimline)
2 x	Pilot "Duke" Legends Series (Slimline)
2 x	Pilot "Goose" (Slimline)
2 x	Pilot "Dick" Legends Series (Slimline)
2 x	1/6 Pilot "Cindy"
3 x	Militarian pilot "Fly Boy" size 9cm (Slimline)
1 x	Piloto jet 130 mm
2 x	1/7 Pilot "Japanese"
2 x	Piloto Jet "Red" 1/6 Scale
2 x	1/12 Pilot "Langley"
1 x	Civilian pilot "Gramps" size 9cm (Slimline)
1 x	Straightened rod Ø 4.0 mm x 1000 mm
2 x	Straightened rod Ø 6.0 mm x 1000 mm
1 x	Brass rod Ø 0.5 mm x 1000 mm
1 x	Brass hexagonal rod Ø 4 mm x 1000 mm
1 x	Straightened rod Ø 7.0 mm x 1000 mm
2 x	Straightened rod Ø 1.5 mm x 1500 mm
1 x	Straightened rod Ø 2.5 mm x 1000 mm
2 x	Straightened threaded rod M3 - 1m
2 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x	Straightened rod Ø 5.5 mm x 1000 mm
1 x	2 LiPo XH>EH adapter
1 x	TP/TopFuel - JST-EH 4/5S Adapter
1 x	Silicone red 0,25 mm² wire (25 m)
1 x	PVC 0,14 qmm servos wire Graupner (100 m)
1 x	5 LiPo XH>EH adapter
1 x	CC 01
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x	JR silicone servo wire 0,35 qmm / 5m
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	Silicone 0,35 qmm servos wire Futaba (100 m)
1 x	Silicone 0,50 qmm servos wire Futaba (100 m)
1 x	30 cm BEC cable (male)
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	Cable Cargador FUTABA
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	CC 02
1 x	Servo NARO Max Std
2 x	2000A 12V Lithium Jump Starter with 150PSI Air inflator
2 x
1 x	Xplorer3 anemometro
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	Locking cable tie 3.2x142 (uds)
1 x	SERVO HOLDER
1 x	Oracover Yellow CADMIO 10 m
1 x	Oracover CHROME 2m
1 x	Support pumb/filter Xicoy X45
1 x	Soporte grifo FESTO (2 pcs)
1 x	Tube support Ø 6mm (10 pcs)
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	AX-60 starters (5 pcs)
1 x	Landing gear clamp for Ø 4 mm (4 uds)
2 x	Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x	Nylon gear block Ø 5 mm (2 uds)
1 x	Piloto JET 1:3,5
1 x	Nylon threaded block M4 (2 uds)
2 x	1/6 Pilot "Tony"
1 x	Check valve quick hose connector 4-4 mm
1 x	Air pressure gauge
1 x	Festo Adaptor Tygon Large/4mm
1 x	Landing gear clamp for Ø 3 mm (4 uds)
1 x	Quick hose connector 3-3 mm
1 x	Quick hose connector 3-3 mm
1 x	1/10 Pilot "Jimmy"
1 x	Pilot JAN 1/4 Saiplanes
1 x	1/4 Pilot "Heidi"
1 x	Piloto RC Civil 1/5- 1/6 Scale 12"
2 x	Piloto Jet "Green" 1/6 Scale
1 x	Straightened rod Ø 14.0 mm x 1000 mm
1 x	Straightened rod Ø 5.0 mm x 1000 mm
1 x	Straightened rod Ø 1.2 mm x 1500 mm
1 x	Straightened rod Ø 8.0 mm x 1000 mm
1 x	Straightened rod Ø 0.5 mm x 1000 mm
1 x	Red smoke bombs AX-60 (5 pcs)
1 x	Thixotropic agent tin/ 15 g (approx. 350ml)
1 x	Glass Bubbles (0.12g) 400 G (aproxx 3.3 l)
1 x	Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor)
1 x	ABS angle 5,0x5,0x1000 mm
1 x	ABS angle 4,0x4,0x1000 mm
1 x	ABS angle 10,0x10,0x1000 mm
1 x	L-Connector 1.0 mm x 1000 mm
1 x	Profile ABS Square 2 x 1000 mm
1 x	FesEx-Uni6 System
1 x	Yellow smoke bombs AX-60 (5 pcs)
1 x	FesEx-Uni8 System
1 x	Motor Advance 50-6
1 x	Motor ORBIT 20-12 with coolingfan
1 x	Conector FESTO G1/8 Quick 4mm 90º
1 x	Brake disc Electron Retracts
1 x	Electron 22 mm Fitting barb
1 x	Y-Hose connector 4mm
1 x	Kit hydraulic brake
1 x	82 mm 12 mm axi 30 g F3A CF drilled spinner
1 x	FESTO connector M7 barb fitting 4mm
1 x	FESTO connector M7 Quick 4mm 90º
1 x	ER40 Front Leg (with wheel 80mm)
1 x	FESTO connector 1/8 Quick 6mm 90º
1 x	Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x	Wheel 115 mm with electromagnet and brake disk + E-Brake (2 uds)
1 x	Electric Landing Gear BULL Mo1 2.6 (Elektron Retracts)
1 x	FESTO connector M5 Quick 4 mm
1 x	FESTO connector M7 barb fitting 6mm
1 x	Racor 2/3 mm
1 x	Civilian pilot "G-Man" size 9cm (Slimline)
1 x	Civilian pilot "Joe" size 9cm (Slimline)
1 x	Ventral support for AX-18/AX-60
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
1 x	Propeller POWER-PROP 12x6
1 x	Propeller POWER-PROP 13x9
1 x	White smoke canister 65 g
1 x	Glow Plug Clip 1.3 Ah
1 x	EXTRA 330L 35% hardware pack (Precision Aerobatics)
1 x	EXTRA 330 LX 2.34m ARF (LX-09) Pilot
1 x	U Profile ABS 5,0x10,0x1000 mm

8,777.71EUR