398.99EUR

DUPLEX 2.4EX Central Box 320
[JETCB320]

JETI Duplex 2.4EX Central Box 320

Product description and features
The Central Box 320 is designed for a complete management of multiple servos and two receiver batteries for a model with high security requirements. The Central Box 320 has an overload protection on each servo output, 8 channels for high-performance servos up to 60 kg / cm and 10 channels for standard servos up to 30 kg / cm. Especially for the use of powerful and power-hungry servos, the Central Box 320 has an aluminum housing for better cooling. The Central Box 320 offers true battery redundancy, DITEX servo telemetry, JETI EX telemetry and up to three receiver inputs (2x 2.4GHz and 1x 900MHz) for full power and RF signal redundancy.
Configuration via JETI Duplex DS/DC transmitters
With JETI Duplex DC/DS transmitters, the full potential of the Central Box 320 can be fully exploited. The device overview of the JETI Duplex DS/DC transmitter makes it easy to perform the entire configuration of the servo outputs, DITEX servo and JETI EX telemetry, function assignment, and more.

Compatibility with Futaba
The Central Box 320 can also be used with two S.Bus receivers (e .g Futaba R7003SB). Setting up and reading out the telemetry values must, however, be realized with a separatly available JETIBOX.
Switching on and off
The switching on and off process of the Central Box 320 is done with the supplied magnetic switch.
Recommended receivers
As receiver e. g. 2 RSat2 or REX3 receivers can be used. Optionally, the use of a REX Assist receiver in combination with a RSat2 receiver is possible, so you get a Central Box with gyro stabilization.

Features
Adjustable powerful BEC for voltage stabilization (connection of standard or HV servos)
DITEX servo telemetry support
Possibility to connect up to 3 receivers with serial communication
built-in Expander function with the possibility of independent connection of up to four JETI EX sensors
Input for magnetic switch or RC switch
Power supply batteries connected via MPX connector
100Hz mode of servo outputs (10ms period)
EX telemetry support (measurement of voltage, current, capacity, temperature, etc.)
Easy settings changes via DC/DS transmitter („Device explorer“)
Robust metal construction with mounting holes

temporarily out of stock

Reviews

Quick Find

Shopping Cart

2 x	Carbon fiber rod 7.0 mmx1000 mm
2 x	Carbon fiber rod 6.0 mmx1000 mm
4 x	Carbon fiber rod 0.5 mmx1000 mm
2 x	Carbon fiber rod 8.0 mmx1000 mm
3 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	Carbon fiber rod 1.5 mm x 1000 mm
3 x	Carbon fiber rod 3.0 mm x 1000 mm
2 x	Carbon fiber rod 2.5 mmx1000 mm
2 x	Carbon fiber rod 14 mmx1000 mm
2 x	Carbon fiber rod 12 mm x 1000 mm
2 x	Carbon fiber rod 5.0 mmx1000 mm
3 x	Squared carbon wing joinner 5x5x220 mm
1 x	Xplorer1 anemometro
1 x	Xplorer2 anemometro
1 x	Xplorer3 anemometro
1 x	OBECHI sheet 2.0x3.0x1000 mm
4 x	Pine wood slat 3.0x5.0x1000 mm
2 x	Pine wood slat 6.0x6.0x1000 mm
1 x	Liston HAYA 3 x 10 x 1000 mm
3 x	BALSA trip 6.0x6.0x1000 mm
1 x	Beech dowels 2.0 x 1000 mm
1 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	BALSA leading edge 8x10x1000 mm
2 x	BALSA triangular 6x6x1000 mm
2 x	BALSA trip 3.0x5.0x1000 mm
2 x	Beech dowels 3.0 x 1000 mm
2 x	BALSA triangular 8x8x1000 mm
3 x	Linden wood slat 2.0x2.0x1000 mm
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	Liston HAYA 10 x 10 x 1000 mm
2 x	Pine wood slat 2.0x10.0x1000 mm
1 x	Pine wood slat 3.0x7.0x1000 mm
3 x	Beech dowels 4.0 x 1000 mm
2 x	BALSA trip 5.0x5.0x1000 mm
2 x	Pine wood slat 10x10x1000 mm
1 x	BALSA trip 10x10x1000 mm
2 x	Trailing edge BALSA 35x8x1000 mm
1 x	BALSA triangular 15x15x1000 mm
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	3 LiPo XH>EH adapter
1 x	Connectors banna oro 6,0 mm (M/F)
1 x	M2,5 5Diam short black ball link V2 (2 pcs)
1 x	Stainless steel cable Ø 0.5 mm (10 m)
1 x	Strip 1,5x1,5x330 mm
1 x	Rescue 1,8m2 / BackPack
1 x	Electromotor starter EME 35cc
1 x	Ignition bed V2 Red color
1 x	SAITO FG-36 carburetor
1 x	Deposito DUBRO 3000cc-100oz
2 x	Suction funnel for carburetor 90D-L (red)
1 x	Deposito SECRAFT V2 1000 ml Gas
2 x	Suction funnel for carburetor WALBRO 20-80cc (blue)
1 x	Electron 22 mm Fitting barb
1 x	Deposito combustible tipo "turbina" 330 ml
1 x	1000 ccm gasoline fuel tank
1 x	Deposito DUBRO 1800cc-60oz
1 x	280 cc gasoline fuel tank complet
1 x	Black "FUEL VENT" round aluminum overflow socket
3 x	Hose clips 6 mm
1 x	Propadapter for motor A50-V3
2 x	Carbon fiber flat 1000x6.0x0.8 mm
1 x	Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x	Sun Cover PC 21 XXL (JMB Jets)
1 x	Aro pasacable Ø25 mm (4 pcs)
3 x	Walnut wood slat 3.0x3.0x1000 mm
1 x	Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x	Support pump Xicoy X45
2 x	Carbon fiber rod 16 mm x 1000 mm
1 x	Carbon fiber flat 1000x3.0x0.5 mm
2 x	Carbon fiber rod 1.5 mm x 2000 mm
1 x	Soporte grifo FESTO (2 pcs)
1 x	Carbon fiber rod 1.0 mm x 1000 mm
1 x	Birch plywood plate 600x300x4.0 mm
1 x	BALSA trip 8.0x8.0x1000 mm
2 x	Beech dowels 10 mm x 1000 mm
1 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	Pine wood slat 5.0x5.0x1000 mm
1 x	Plywood sheet BEECH 600 x 300 x 2,0 mm
1 x	Walnut wood slat 2.0x2.0x1000 mm
2 x	BALSA triangular 10x10x1000 mm
1 x	Lite Plywood panel 600x300x3.0 mm
1 x	A/C economy plywood 600x300x6+.0 mm
2 x	A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	FESTO connector M7 Quick 4mm 90º
1 x	Extension Arm for Carburetor (red)
1 x	Hose stopper 4 mm
1 x	Pendulum glow tank
1 x	Fuel Fittings-Blue
1 x	diameter silicone tube for glow
1 x	FESTO Polyurethan tube for turbine 4x2,5x1000 mm (transparent)
1 x	Fuel line plugs (Red)
1 x	Quick hose connector 4-4 mm
1 x	Suction funnel for carburetor DA70- MVVW 190cc (red)
1 x	Precission dot for SAITO FA65/72/80/91S/100/120S/150S/180
1 x	FESTO connector M5 Quick 4 mm
1 x	Tube mounting clamps
1 x	Fuel line plug Large 2 pcs
1 x	Suction funnel for carburetor WALBRO 20-80cc (red)
1 x	Fuel line plugs (Black)
1 x	Hose clamps 0.16-0.20in, (4 pieces)
1 x	FESTO Blanking plug G1/8
1 x	Reed valve for DA 50-R
1 x	Tubo silicona transparente 3.5 x 2 mm (1m)
1 x	Fuel Fittings-Gold
1 x	Walbro carburetor for MVVS 26/30/35/40 cc
1 x	Tube mounting clips (5 pcs)
1 x	FESTO connector M7 Quick 4 mm
1 x	FESTO connector M7 barb fitting 6mm
1 x	DA 85 / DA 100 / DA 100 L carburetor
1 x	Suction funnel for carburetor 90D-M (red)
1 x	Simple take for fuel tank
1 x	GLOW 2C + accesories
1 x	Tubo silicona transparente 7 x 3 mm (1m)
1 x	Tube holder
1 x	Gas combustible tube
1 x	FESTO Polyurethan tube for turbine 6x4x1000 mm (transparent)
1 x	Variable Flow Smoke Pump System
1 x	PowerBox Smokepump JETs 2x outside
2 x	Carbon fiber rod 20 mmx1000 mm
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Carbon fiber rod 4.0 mmx1000 mm
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	DUPLEX 2,4EX Switch SAFETY 2-Position Safety DC-16/14
1 x	FOX 3000 mm, Fuselage (FMS)
1 x	4,8x1000 mm 2:1 black termoretract tube
1 x	58 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	1,6x1000 mm 2:1 black termoretract tube
1 x	4,8x1000 mm 2:1 red termoretract tube
1 x	0,14 mm PVC servo wire extension, ZH micro conector.
1 x	Carburetor DLE 20
1 x	DLE 55-RA Muffler
1 x	Canister combo DLE 170 cc
1 x	Balsa panel 3.0x100x1000 mm
1 x	Birch plywood plate 600x300x2.0 mm
1 x	Birch plywood plate 600x300x1.2 mm
1 x	Birch plywood plate 600x300x3.0 mm
2 x	Carbon fiber rod 2.0 mmx1000 mm
1 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x	Carbon fiber rod 10 mm x 1000 mm
1 x	BALSA trip 2.0x2.0x1000 mm

3,632.03EUR