Top » Catalog » Jeti » JETCB220

280.90EUR

DUPLEX 2.4EX Central Box 220
[JETCB220]


JETI Duplex 2.4EX Central Box 220
Product description and features
The Central Box 220 is the successor to the popular Central Box 200. Especially for the use of powerful and power-hungry servos, the Central Box 220 uses an aluminum housing and new over current protection of the servo slots. The Central Box 220 offers true battery redundancy, DITEX servo telemetry, JETI EX telemetry and up to three receiver inputs (2x 2.4GHz and 1x 900MHz) for full power and RF signal redundancy.
Configuration via JETI Duplex DS/DC transmitters
With JETI Duplex DC/DS transmitters, the full potential of the Central Box 220 can be fully exploited. The device overview of the JETI Duplex DS/DC transmitter makes it easy to perform the entire configuration of the servo outputs, DITEX servo and JETI EX telemetry, function assignment, and more.
Switching on and off
The switching on and off process of the Central Box 220 is done with the supplied magnetic switch.

Recommended receivers As receiver e. g. 2 RSat2 or REX3 receivers can be used. Optionally, the use of a REX Assist receiver in combination with a RSat2 receiver is possible, so you get a Central Box with gyro stabilization.

Features
Configurable servo outputs
for 11 servos with ~ 30kg torque and 4x ~ 50kg
Battery connections 2x MPX connector system
Robust aluminum housing for extra cooling and protection
Firmware upgradeable via JETI USB adapter and JETI Studio
Wireless programming via the device overview of the DC/DS transmitters
Up to 3 independent receiver inputs (R1, R2, E1/R3)
Up to 15 servo slots (suitable for DITEX servo telemetry)
Up to 3 telemetry sensor inputs (E1/R3, E2/15, E3/14)
Input for supplied magnetic switch or optional RC switch
1 JETI Duplex 2.4EX Central Box 220, 1 magnetic switch, 1 magnetic key and 1 patch cable.

Important Note
If the Cortex pro is operated on a CentralBox, please be sure to use an additional patch cable for +/- supply. See the detailed bavarianDEMON CORTEXpro Instruction


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Hovercraft sailcloth
1 x Nitroverdu 500 ml
2 x Plasti Dip Liquid Tape 429 ml black
1 x PARTALL® Hi-Temp Wax, 340 g
3 x PPM Encoder Module
2 x Digital Air Speed Sensor And Pitot Tube Set
2 x Tube Pitot to PIXHAWK
1 x Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x Steering arm 12 mm Ø 4 mm
1 x Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x Crimping sleeves for cable 0.85 mm (10 pcs)
1 x Canopy Latch
1 x Crimping sleeves for cable 1.3 mm (10 pcs)
1 x Steering arm 16 mm Ø 3 mm (2 uds)
1 x Cierre cabina aluminio Ø4, I=10 mm
1 x Crimping sleeves for cable 0.70 mm (10 pcs)
1 x Locking cable tie 2.5x100 (uds)
1 x One touch canopy lock
1 x Aluminium alloy coupler for carbon tube 6/M4
1 x Locking cable tie 3.2x142 (uds)
1 x Stainless steel cable Ø 0.62 mm (10 m)
1 x Steering arm 16 mm Ø 4 mm (2 uds)
1 x Covered closure or fairings
1 x Steering arm 16 mm Ø 3 mm
1 x Cockpit plastic closing
1 x Steering arm 12 mm Ø 3 mm (2 uds)
1 x SUS wire 3m (nylon coated)
1 x Cabin latch Fox MDM1 4m (pair)
1 x Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x Yellow smoke canister 65 g
1 x White smoke canister 140 g
1 x Circlick securite
1 x Extension silicon 30 cm female (Futaba)
1 x Pilot "Goose" (Slimline)
1 x Oracover GREY Seafire Sea 2m
1 x Oracover Brown 2 m
1 x 45 mm rods set for direction control
1 x Support Pitot JETI
3 x MAMBO 17
1 x Aro pasacable Ø20 mm (4 pcs)
1 x Recessed MPX connector support (6 pcs)
1 x Aro pasacable Ø25 mm (4 pcs)
1 x Soporte grifo FESTO vertical (1 pcs)
1 x Hobbylite Filler, Balsa colour
1 x 1000 ml sealer (DOPE)
1 x Spray adhesive INFUTAC (Clear) 500 ml
3 x 
1 x Partall paste 650 g
3 x Tapa estado carga XT-60 (6 pcs)
2 x Support Filtro FESTO
2 x Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g
1 x Propeller POWER-PROP 7x7
3 x Jet Afterburner Simulator NF-Jet2
3 x Jet Afterburner Simulator NF-Jet3 RY
3 x Jet Afterburner Simulator NF-Jet1RY Set
3 x NF-3m Heli Kit
3 x NF-3 RC set
1 x Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs
2 x MEKP Harderner 100 g
1 x Hardener Aero EPH 161 (250 g)
2 x Premium servo extension 50cm
1 x XH male balance (2S) connector (2 pcs)
1 x XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell
1 x XH female balance (2S) connector (2 pcs)
1 x resin-hardener package L-385 with hardener H-385 (875 g)
1 x Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg
1 x Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg
1 x White gelcoat 1 Kg
1 x Epoxy SLOW-CURE™ 30 min (260g)
1 x Epoxy QUIK-CURE™ 5 min (260g)
1 x Wheel collar 4 mm Ø (4 uds)
1 x Canopy Lock V1 M3 Blue (2 pcs)
1 x ProgBOX MASTER Hacker
1 x Wing bolts M3 Steel screw Red (2 pcs)
1 x Cable grommet Ø 5 mm (4 uds)
1 x Cable grommet 9.5 mm (4 uds)
1 x 80 mm rods set for direction control
1 x 41x5,5 mm wires output (2 pcs)
1 x Snap for floding prop for 2 mm axi
1 x Triple rod con. 2mm Pushrod (2 pcs)
1 x Aluminun wheel collar 3 mm Ø (4 uds)
1 x Split pin 1.6x16 mm (10 uds)
1 x Connectors banna oro 2 mm (M/F)
1 x Turbina JetsMunt VT98 NG
1 x FOD guard for VT80BL, M90, M100K, M100XBL, M140K, M140XBL and M
1 x Xoar Electric Beechwood Prop 16x7
1 x Scale exhaust K45TP
1 x 
1 x XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell
1 x XH male balance (6S) connector (2 pcs)
1 x XH male balance (8S) connector (2 pcs)
1 x XH 30 cm Male extension 0,25 mm2 silicone cable for 4 cell
1 x Turbine KingTech K30G Restart
2 x Servo NARO Max Std
1 x Kerostarter K30G
1 x Exhaust K45TP
1 x Battery LiFe -1450/25C-3S 9.9V
2 x 2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x Turbina KINGTECH K320 G5
1 x Battery LiFe -3000/25C-3S 9.9V
1 x Filter KingTech
1 x Turbine KINGTECH K160 G4
1 x Battery LiFe -2100/25C-3S 9.9V
1 x Bomba KP500V Kingtech
1 x Support XT60 conector (2 pcs)
1 x Support ECU Xicoy X-45
1 x Motor A50-14 L 8-Polos Electric turbine
1 x NF-3X-350 set
1 x FesEx-Uni6 System
1 x Prop Saver for AXI 22xx/xx
1 x Fiberglass motor-holder for electric motors
1 x Cables suitable for the motor AC 28/7
1 x Frontal support Speed 400/480
1 x Electric coversion set
1 x PYRO 700-56L
1 x KIRA 400-39 5,2:1
1 x ASK 21 6.8m
1 x KIRA 600-20
1 x ASW 20 5000 mm with winglets (Airwold)
1 x VAGABOND 1500 mm ARF V2 (Red)
1 x DG-303 ACRO 3750 mm (Airworld)
1 x FOX MDM-1 3.500 mm ARF White
1 x PYRO 750-50L Competition
1 x KIRA 600-22 6,7:1
1 x LUNAK 4,00 m
1 x KIRA 500-36 6,7:1
1 x GP 15 JETA
1 x PYRO 650-103 Long Axi
1 x Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg
1 x Epoxy Resin L 285 + Hardener 386, kit/ 675g
1 x Silicone black 4,0 qmm wire (25 m)
1 x Support Antena 2.4 Ghz (2 pcs)
1 x Angle support XT60 conector
1 x Support Flush MPX Conector (6 pcs)
1 x Motor A40-10S V4 14-Pole
1 x Motor A40-14 L 14-Pole V4
1 x Jet Afterburner Simulator NF-Jet2YY Set
1 x Motor A50-14L Turnado V3 Glider
1 x 5 line servos wire black (1 m)
1 x 1 m servo "Premium" wire (white/red/blue)
1 x Prolongador S-Bus JR/JR 20cm
1 x FesEx-Uni8 System
1 x AXI Cooler 22xx
1 x Universal Prop Saver
1 x PH6 adapter for 6mm M10 AXI for AXI41xx
1 x AXI Cooler 41xx
1 x Prop Holder AXI 41xx V2
1 x Motor holder AXI
1 x 8 mm Adapter for AXI53xx
1 x Ø 28 mm fiberglass motor-holder for electric motors
1 x Disipador para motor Hacker B 20 (or motors up to Ø20 mm)
1 x Motor mount for 1 m models
1 x Central support Speed 600
1 x Motor mount for 1200 mm models
1 x Motor holder AXI
2 x Cooler motor type 300
1 x Cooler motor type 400
1 x Ø 40 mm fiberglass motor-holder for electric motors
1 x Indoor motor holder
1 x Receiver bed (Blue)
1 x Motor holder for AC 28/7
1 x Central support Speed 280
1 x Frontal support Speed 280
1 x Size "M" motor holder for class 400
1 x Motor Mount for Multiplex FunJet
1 x Bearings for motor HACKER C50
1 x Frontal support Speed 600
1 x Motor Scorpion HKIII 4035-560 Kv
1 x Size "L" motor holder for class 600
1 x Size "M" motor holder for class 600
1 x Hacker A30-S Radial Set
1 x Fan for A60
1 x A50 Motor Mount Alu complete set
1 x A60 Motor Mount Alu complete set
1 x 10 mm gas motor standoff
1 x Fox 4000 mm with flaps (Airwold)
1 x Support pumb/filter Xicoy X45
1 x LO 100 ARC 3.3m,cabina
1 x LO 100 ARC 3.3m
1 x Swift ARF 2000 mm Red (Hacker Model)
1 x KIRA 600-16
1 x Fox MDM 1 4000 mm DeLuxe
1 x KIRA 480-31 5,2:1
1 x LO 100 Scale 1:2 - Modellbau Bruckmann
1 x PYRO 800-40 Long Axi
1 x ASH 31 6.08m Composite Hollow Molded
1 x Fox MDM 1 4000 mm Std.
1 x KIRA 480-34
1 x Kobuz 5000 mm (Airwold)
1 x VAGABOND 1500 mm ARF V2 (Blue)
1 x KIRA 400-27
1 x KIRA 600-20 6,7:1
1 x BLANIK 50 V2 Silver/Blue (SebArt)
1 x Fox MDM 1 4000 mm DeLuxe,Panel instrument Fox MDM 4m
1 x Fox MDM 1 4000 mm DeLuxe,wing joiner
1 x ASH 31 Mi Scale:1/3 - 7m, elevator
1 x KIRA 600-17
1 x KIRA 480-26 5,2:1
1 x Fox 4000 mm (Airwold)
1 x KIRA 600-38 6,7:1
1 x Fox MDM 1 6000 mm
1 x PYRO 750-50L
1 x Fox MDM 1 4000 mm DeLuxe,Fox 1:4 set of instruments for the f
1 x KIRA FAI 5F5/4s
1 x Fox MDM 1 4000 mm DeLuxe,Fundas deLuxe
1 x DG-303 ACRO 3750 mm, canopy
1 x DG-303 ACRO 3750 mm, winglets
1 x BLANIK 50 V2 Silver/Blue (SebArt), cabina
1 x KIRA 600-24 6,7:1
1 x LIBELLE Standard 3.8m D-box H-201
1 x DRIVE 550 (KIRA 500-26 6,7:1 + KOBY 55 LV)
1 x KIRA 480-43 5,2:1
1 x KIRA 400-34
1 x PYRO 700-45 Long Axi
1 x LO 100 ARC 3.3m,frame canopy
1 x Ka-8b ELECTRIC 6000 mm ARF 1:2.5 (Phoenix Models)
1 x PYRO 800-48 Long Axi
1 x PYRO 600-11
1 x Fox 4000 mm Airworld,cabina
1 x Surprise XII Horizontal Estabilizer (Freudenthaler)
1 x Surprise XII Rudder (Freudenthaler)
1 x ASW 15 5000 mm (Airwold)
1 x KIRA 500-30 6,7:1
1 x PYRO 900-52L
1 x Fox 4000 mm Airworld,canopy frame
1 x Fox MDM-1 ARF 3.5m Orange
1 x PYRO 600-12
1 x DISCUS 2A De Luxe 3.750 mm (Topmodel)
1 x KIRA 500-26 6,7:1
1 x Fournier RF-4D
1 x KIRA 480-38 5,2:1
1 x resin-hardener L-385 H-385 (625 g)
1 x Epoxy MID-CURE™ 15 min (130g)
1 x Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg
1 x Mould Resin P 10 kg
1 x DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch
66,887.89EUR
Manufacturers
Manufacturer Info
Jeti
Jeti Homepage
Other products
Languages
Español English
Currencies