Top » Catalog » Jeti » JETCB3202+

534.01EUR

DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch
[JETCB3202+]


JETI DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch

Product description and features
The Central Box 320 is designed for a complete management of multiple servos and two receiver batteries for a model with high security requirements.The Central Box 320 has an overload protection on each servo output, 8 channels for high-performance servos up to 60 kg / cm and 10 channels for standard servos up to 30 kg / cm. Especially for the use of powerful and power-hungry servos, the Central Box 320 has an aluminum housing for better cooling. The Central Box 320 offers true battery redundancy, DITEX servo telemetry, JETI EX telemetry and up to three receiver inputs (2x 2.4GHz and 1x 900MHz) for full power and RF signal redundancy.

Configuration via JETI Duplex DS/DC transmitters
With JETI Duplex DC/DS transmitters, the full potential of the Central Box 320 can be fully exploited. The device overview of the JETI Duplex DS/DC transmitter makes it easy to perform the entire configuration of the servo outputs, DITEX servo and JETI EX telemetry, function assignment, and more.

Compatibility with Futaba
The Central Box 320 can also be used with two S.Bus receivers (e .g Futaba R7003SB). Setting up and reading out the telemetry values must, however, be realized with a separatly available JETIBOX.

Switching on and off
The switching on and off process of the Central Box 320 is done with the supplied R/C switch.

Recommended receivers
Two compatible RSat2 receivers are included. Optionally, the use of a REX Assist receiver in combination with a RSat2 receiver is possible, so you get a Central Box with gyro stabilization.

Features
Adjustable powerful BEC for voltage stabilization (connection of standard or HV servos)
DITEX servo telemetry support
Possibility to connect up to 3 receivers with serial communication
built-in Expander function with the possibility of independent connection of up to four JETI EX sensors
Input for magnetic switch or RC switch
Power supply batteries connected via MPX connector
100Hz mode of servo outputs (10ms period)
EX telemetry support (measurement of voltage, current, capacity, temperature, etc.)
Easy settings changes via DC/DS transmitter („Device explorer“)
Robust metal construction with mounting holes


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Motor A2212/13T
1 x Canopy Lock V1 M3 Red (2 pcs)
1 x Crimping sleeves for cable 0.70 mm (10 pcs)
1 x DYNAMOMETER S-1580
1 x Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
2 x Red smoke canister 140 g
1 x "M" set
1 x Straightened rod Ø 5.5 mm x 1000 mm
1 x Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
1 x Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
3 x Flat Connector 4.0 mm x 1000 mm
2 x Profile ABS Square 2 x 1000 mm
2 x Green smoke canister 140 g
1 x ABS angle 6,0x6,0x1000 mm
1 x Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x Silicone 0,50 qmm servos wire Graupner(5 m)
1 x Flat washer 1.7 mm (20 pcs)
1 x SE Ring 400 mm (2 pcs)
1 x RF9 Flight Simulator with Spektrum Controller
1 x CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x ABS tube 18.0x16.0x1000 mm
1 x Quicklock washer 3.5 mm (10 pcs)
1 x Aluminium cap bolt washer M4 blue (8 pcs)
1 x Angled clevis with threaded rod M3
1 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Monokote BLANCO jet (1.8x0.65m)
1 x Quicklock washer 4 mm (10 pcs)
1 x Oratex Yellow Cub 10 m
1 x Straightened rod Ø 7.0 mm x 1000 mm
1 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Civilian pilot "Curt" size 9cm (Slimline)
1 x 1/10 Pilot "Jimmy"
2 x ABS angle 4,0x4,0x1000 mm
2 x Straightened threaded rod M2-1m
2 x Straightened rod Ø 1.2 mm x 1500 mm
2 x Straightened rod Ø 4.5 mm x 1000 mm
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x PVC 0,14 qmm servo wire Futaba (5 m)
3 x ABS angle 3,0x3,0x1000 mm
1 x White silicone 0,25 mm² wire (25 m)
1 x 50m servo "Premium" wire (white/red/blue)
2 x Brass rod Ø 0.5 mm x 1000 mm
1 x Spring lock washer 2.1 mm (20 pcs)
1 x ABS tube 14.0x10.0x1000 mm
1 x SE Ring 450 mm (2 pcs)
1 x M2/M1/6 3Diam short black ball link V1 (6 pcs)
1 x ORACOVER transparent Yellow (10 m)
3 x L-Connector 4.0 mm x 1000 mm
2 x Yellow smoke canister 65 g
1 x EasyFLY Addon
1 x Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x Liston HAYA 3 x 10 x 1000 mm
1 x BALSA triangular 8x8x1000 mm
1 x 4 LiPo XH>EH adapter
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x BALSA trip 8.0x8.0x1000 mm
1 x 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x BALSA triangular 6x6x1000 mm
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x Liston HAYA 8 x 8 x 1000 mm
1 x Pine wood slat 10x10x1000 mm
1 x Breatex™ Non-woven absorber 150 g/m² Roll 50m
1 x Breatex™ Non-woven absorber 150 g/m² Roll 100m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x Carbon fibre sandwich sheet 350x150x3 mm
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x Aro pasacable Ø25 mm (4 pcs)
2 x ABS "T" angle 6.0x6.0x1000 mm
1 x Smoke set "Glider"
1 x 3l Smoke oil
1 x B4-0 rocket charges (6 pcs)
1 x U Profile ABS 2,0x4,0x1000 mm
1 x AX-60 starters (5 pcs)
1 x Profile ABS half cane 4x1000 mm
1 x Profile ABS triangular 4.0x1000 mm 60º
1 x Straightened rod Ø 0.8 mm x 1000 mm
2 x Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
2 x ABS angle 10,0x10,0x1000 mm
2 x Profile ABS Square 3 x 1000 mm
1 x Bungee HLG Premium
1 x 150 Newtons FEMA absorber
1 x Extinguisher CO2 - 2 Kg
1 x Red smoke bombs AX-60 (5 pcs)
1 x Profile ABS half cane 2.0x1000 mm
1 x Support ECU Xicoy X-45
1 x White smoke canister 65 g
1 x PCARD Wireless System
1 x ABS angle 1.5x1.5x1000 mm
1 x Red smoke canister 100 g
2 x Profile ABS half cane 2.5x1000 mm
1 x Blue smoke canister 140 g
1 x Yellow smoke canister 100 g
1 x Smoke set "S"
1 x Parachutist
1 x Soporte grifo FESTO (2 pcs)
1 x Profile ABS triangular 6.0x1000 mm 90º
1 x Tube support Ø 6mm (10 pcs)
1 x Electric rocket starters (6 pcs)
2 x ABS angle 2,0x2,0x1000 mm
1 x Support Filtro FESTO
1 x ABS rectangular profile 12x6.0x1000 mm
1 x Initior Transmitter FTX2 Wireless
1 x White smoke bombs AX-18 (5 pcs)
1 x White smoke canister 140 g
1 x Remote electric ignition system
1 x Ferrita 27x14x7 mm
1 x Green smoke canister 100 g
1 x Ferrita con funda
1 x White smoke canister 100 g
1 x Green smoke canister 65 g
1 x Profile ABS Square 1 x 1000 mm
2 x ABS "T" angle 4.0x4.0x1000 mm
1 x Cross Connector 4.0 mm x 1000 mm
1 x Smoke set "M"
1 x "S" set for planes
1 x Recessed MPX connector support (6 pcs)
1 x ABS angle 5,0x5,0x1000 mm
1 x Plastic caps for AIR BURTS (30 pcs)
1 x Parachute expulsion foam
1 x Support Pitot JETI
1 x EVP Unit for AXI2208/xx and 2212/xx
1 x Soporte filtro FESTO (4 pcs)
2 x L-Connector 1.5 mm x 1000 mm
1 x White smoke bombs AX-60 (5 pcs)
2 x U Profile ABS 8,0x4,0x1000 mm
1 x Profile ABS half cane 5.0x1000 mm
1 x Support conector MPX (6 pcs)
1 x Support pump Xicoy X45
1 x Profile ABS Square 4 x 1000 mm
1 x Mixers smoke bombs AX-60 (5 pcs)
1 x Profile ABS triangular 2.0x1000 mm 90º
1 x Straightened rod Ø 8.0 mm x 1000 mm
1 x Straightened rod Ø 6.0 mm x 1000 mm
1 x Aluminium rod Ø 4.0 mm x 3000 mm
1 x U Profile ABS 1,0x2,0x1000 mm
1 x Streamline Stainless Steel Tubing 10.5x5.7x1000 m
2 x Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x Brass rod Ø 0.8 mm x 1000 mm
1 x Straightened threaded rod M3 - 1m
1 x Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x Brass hexagonal rod Ø 4 mm x 1000 mm
1 x Brass rod Ø 1.0 mm x 1000 mm
1 x Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x T-Connector 4.0 mm x 1000 mm
1 x Brass hexagonal rod Ø 3 mm x 1000 mm
1 x Straightened rod Ø 3.0 mm x 1000 mm
1 x ABS "T" angle 10.0x10.0x1000 mm
1 x Straightened rod Ø 1.0 mm x 1000 mm
1 x Brass rod Ø 1.5 mm x 1000 mm
1 x U Profile ABS 5,0x10,0x1000 mm
1 x Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x Vasa model Catapult
1 x Teflon rollers 40 mm x 15 mm Diam.
1 x Carbon plate 550x350x1.5 mm ECOTECH
1 x Foam plastic plates (310x210x5 mm)
1 x Carbon plate 550x350x2.5 mm ECOTECH
1 x Fiberglass plate 620x540x3,2 mm
1 x Fiberglass plate 620x540x0,3 mm
1 x Foam plastic plates (310x210x3 mm)
1 x Fiberglass plate 350x150x1.5 mm
1 x Sandwich carbon + poplar 3mm + carbon 290x160 mm
1 x Sandwich carbon + poplar 2mm + carbon 480x290 mm
1 x Fiberglass plate 350x150x4.0 mm
1 x Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs)
1 x Sandwich carbon + poplar 2mm + carbon 290x160 mm
1 x Styrene plate 320x120x1.0 mm
1 x Blades 330mm
1 x Soporte grifo FESTO vertical (1 pcs)
1 x Glases Nimbus
1 x Tapa estado carga XT-60 (6 pcs)
1 x Antena FUTABA R7108/7014/7114SB (1 pc)
1 x Futaba Aero Large Case - Internal Foam
1 x Futaba SBS-02A Air Pressure Telemetry Sensor (FASSTest/T-FHSS)
1 x Antenna FUTABA 2.4GHz 3PM/8FG/14SG/18SZ/18M
1 x White smoke bombs AX-9 (10 pcs)
1 x Blue aluminium servo arm V1-Hitec 1,25" inch M3
1 x Wing tips support for AX-18/AX-60 (2 pcs)
1 x Blue aluminium servo arm V1-Hitec 1,0" inch M2
7,163.42EUR
Manufacturers
Manufacturer Info
Jeti
Jeti Homepage
Other products
Languages
Español English
Currencies