258.00EUR

DUPLEX 2.4EX Central Box 210
[JETCB210]

JETI Duplex 2.4EX Central Box 210
Product description and features
The Central Box 210 is the successor to the popular Central Box 200. Especially for the use of powerful and power-hungry servos, the Central Box 210 uses an aluminum housing and avoids the over current protection of the servo slots. The Central Box 210 offers true battery redundancy, DITEX servo telemetry, JETI EX telemetry and up to three receiver inputs (2x 2.4GHz and 1x 900MHz) for full power and RF signal redundancy.
Configuration via JETI Duplex DS/DC transmitters
With JETI Duplex DC/DS transmitters, the full potential of the Central Box 210 can be fully exploited. The device overview of the JETI Duplex DS/DC transmitter makes it easy to perform the entire configuration of the servo outputs, DITEX servo and JETI EX telemetry, function assignment, and more.
Compatibility with Futaba
The Central Box 210 can also be used with two S.Bus receivers (e .g Futaba R7003SB). Setting up and reading out the telemetry values must, however, be realized with a separatly available JETIBOX.
Switching on and off The switching on and off process of the Central Box 210 is done with the supplied magnetic switch.
Recommended receivers
As receiver e. g. 2 RSat2 or REX3 receivers can be used. Optionally, the use of a REX Assist receiver in combination with a RSat2 receiver is possible, so you get a Central Box with gyro stabilization.
Features
Configurable servo outputs
Battery connections 2x MPX connector system
Robust aluminum housing for extra cooling and protection
Firmware upgradeable via JETI USB adapter and JETI Studio
Wireless programming via the device overview of the DC/DS transmitters
Up to 3 independent receiver inputs (R1, R2, E1/R3)
Up to 15 servo slots (suitable for DITEX servo telemetry)
Up to 3 telemetry sensor inputs (E1/R3, E2/15, E3/14)
Input for supplied magnetic switch or optional RC switch
Optional over current protection
The Central Box 210 is not equipped with the built-in overload protection of the servo slots. To protect critical servos such tow coupling servos, retractable landing gears or spoiler servos, the optional overload protection DPSI OCP (Accessories tab) can be used.
Feature
Servo outputs 15
Protected servo outputs (for servos with up to 30kg/cm)
Protected servo outputs (for servos with up to 30kg/cm)
Receiver inputs up to 3
Satellite receiver support Yes
Telemetry Yes
DITEX servo telemetry Yes
Battery inputs 2
Supply voltage [V] 4 up to 8.4
Voltage regulator No
Permanent current [A] 20
Peak current (approx. 2 seconds) [A] 90
Idle current [µA] 180
Operating temperature [°C] ([°F]) -20 to 75 (-4 to 167)
Dimensions [mm] ([in]) 66 x 42 x 18 (2.6 x 1.65 x 0.71)
Weight [g] ([oz]) 59 (2.08)

Bajo pedido

Comentarios

Búsqueda Rápida

Cesta de Compras

1 x	Varilla carbono 3.0 mm x 1000 mm
1 x	Varilla carbono 10 mm x 1000 mm
1 x	Varilla carbono plana 1000x3.0x0.5 mm
1 x	Varilla carbono 4.0 mmx1000 mm
1 x	Bayoneta de carbono cuadrada 5x5x220 mm
1 x	Varilla carbono 2.5 mmx1000 mm
1 x	Varilla carbono 6.0 mmx1000 mm
1 x	Varilla carbono 20 mmx1000 mm
1 x	Varilla carbono 8.0 mmx1000 mm
1 x	Varilla carbono 14 mmx1000 mm
1 x	Varilla carbono plana 1000x3.0x0.13 mm
1 x	Varilla carbono 5.0 mmx1000 mm
1 x	Varilla carbono 0.5 mmx1000 mm
1 x	Varilla carbono plana 1000x6.0x0.8 mm
1 x	Varilla carbono 0.5 mmx1000 mm
1 x	Acoplador M2,5 Ø 2 mm (10 pcs)
1 x	Ball link ALU M3/2 con rodamiento (1 pcs)
2 x	Crimping sleeves para cables de 1.1 mm (10 pcs)
2 x	Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
2 x	Acople ALU M2,5 Ø 6 (2 uds)
1 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x	Ball link ALU M2,5/2 con rodamiento (1 pcs)
1 x	Ball link aluminio M3 V1 azul (10 pcs)
1 x	Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
3 x	Acople ALU M2 Ø 4 (2 uds)
2 x	Acople ALU M3 Ø 6 (2 uds)
3 x	Acoplador "Z" Ø 2 (2 uds)
1 x	Acoplador Micro M2 Ø 1 mm (10 pcs)
1 x	Kwik link AL M3 con Clip (2 pcs)
1 x	Acoplador M3 (10 uds)
1 x	Ball link aluminio M3 V1 rojo (10 pcs)
4 x	Acople ALU M3 Ø 4 (2 uds)
1 x	Ball link Aluminio M3 (2 pcs)
2 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x	Acoplador "Z" Ø 1.8 (2 uds)
1 x	Ball link V1 Ø7 M4/3 (6 uds)
1 x	Ball Link ALU M3 - RH (1 pcs)
1 x	Ball link aluminio M3 V1 (10 pcs)
1 x	Acoplador "Z" Ø 1 (2 uds)
2 x	Varilla latón Ø 1,5 mm x 1000 mm
1 x	Varilla acero Ø 6,0 mm x 1000 mm
1 x	Varilla acero Ø 4,0 mm x 1000 mm
2 x	Varilla acero Ø 0,8 mm x 1000 mm
1 x	Varilla Aluminio Ø 4,0 mm x 3000 mm
2 x	Varilla acero Ø 1,5 mm x 1000 mm
1 x	Varilla acero Ø 3,0 mm x 1000 mm
1 x	Varilla acero Ø 5,5 mm x 1000 mm
1 x	Varilla acero Ø 2,0 mm x 1000 mm
1 x	Horn aluminio anodiazado 6 mm azul con rótula
1 x	Horn de mando 5/15 con rótula M2
1 x	Horn aluminio pequeño rojo (2pcs)
1 x	Acople ALU Izda. M2,5 Ø 3 (2 uds)
1 x	Conjunto de mandos arriostrados
1 x	Horn control flaps (1 pcs)
1 x	Acople ALU M2,5 Ø 3 (2 uds)
2 x	Acople ALU M3 Ø 5 (2 uds)
1 x	Horn aluminio pequeño azul (2pcs)
1 x	Horn aluminio pequeño amarillo (2pcs)
1 x	Acople ALU Izda. M3 Ø 4 (2 uds)
1 x	Horn de mando 6/20 con rótula M3
2 x	Horn 16,5x20 mm (2 pcs)
1 x	Horn de control para SlowFlyer (3 pcs)
1 x	Horn corto de latón M2 para cable (2 pcs)
1 x	Horn de mando 6/35 con rótula M3
1 x	Cable con accesorios
1 x	Horn de mando 5/10 con rótula M2
1 x	Acople ALU Izda. M2,5 Ø 4 (2 uds)
1 x	Horn con ball 40x30
1 x	Horn aluminio RH largo (2pcs)
1 x	Conjunto bieleta 80 mm para dirección
1 x	Varilla carbono 2.0 mmx1000 mm
1 x	Frenos Cuchillo 250 mm / 16 mm
1 x	Relleno Presto SF Light Filler styrene-free (420 g)
1 x	Sistema cierre 250 mm con abrazadera (2 pcs)
1 x	Conector equilibrado XH (5S) hembra (2 pcs)
1 x	Arandela conica alumino M3 azul (8 pcs)
1 x	Arandela conica ancha alumino M4 Oro (4 pcs)
1 x	Conector Sub-D 2+5 Macho
1 x	Prolongador S-Bus 1-2 silicona 120 cm
2 x	Tensor de riostras M2,5x27/43 (2pcs)
1 x	Tapa estado carga XT-60 (6 pcs)
1 x	Tensor de riostras M2x29/43 (2pcs)
1 x	Jeti Box mini
2 x	Acoplador M2 (10 uds)
1 x	Soporte tubo Ø 6mm (10 pcs)
1 x	Clevis con trasmisión M3
1 x	Kwik link micro (10 uds)
1 x	Anclaje cabina de soporte vertical "tipo F3A" (2 pcs)
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Pasacables con soporte GFK "A" (2 pcs)
1 x	Alicate para "Ball-Link"
1 x	Kwik link y brazo de nylon M4xM2,5xL30
1 x	Anemometro Xplorer1
1 x	Bascula precision 0.1-2000 g
1 x	Pin Ø 1,6 mm para Kwik link MPJ2150/2157 (6 pcs)
1 x	Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Anemometro Xplorer4
1 x	Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Pin 2,5 terminales riostras M2,5 ⌀ (6 pcs)
1 x	Porta Kwik link M4 4 mm (2 pcs)
1 x	Pin Ø 1,6 mm para Kwik link MPJ2160/2161 (6 pcs)
1 x	Kwik link con brazo M3xM2xL24
1 x	Varilla carbono plana 1000x3.0x1.0 mm
1 x	Polea de bronce 12/2 (2 pcs)
1 x	Pin 2,0 para terminales riostras M2,0 ⌀ (6 pcs)
1 x	Kwik link con brazo M5xM2,5xL30
1 x	linea kevlar Ø 0,5 mm para pull pull (3 m)
1 x	Cera desmoldemante "Alta Temperatura" 340g
1 x	Simulador del Quemador NF-Jet3 RY
1 x	Cianocrilato MD GLUE+ 405 20g (viscosidad media)
1 x	AIREX® M060 lámina (amarilla) 1200x550x1,2 mm (5 pcs)
1 x	Set luces Airliner 2.1m Wingspan Scale 1:14 Civil/Sport
1 x	Led Flash (blanco - 2 pcs)
1 x	Sistema de luces de alta potencia
1 x	Cinta fibra Carbono 125 g/m², 3k, UD (100 mm) roll/ 50 m
1 x	4Wx2 Power Navigation Light, 13mm, T-Fuse White
1 x	Cianocrilato MD GA460 odourless 20g
1 x	AIREX® M060 lámina (amarilla) 1200x550x2,0 mm (20 pcs)
1 x	Cinta fibra carbono 25 mm 3k 125 g/m2 x 10m
1 x	Acoplador M2,5 Ø 3 mm (10 pcs)
1 x	8Wx2 Navigation & Strobe, 11mm Red/White
1 x	Bascula precisión 0.1- 600 g
1 x	AIREX® M060 lámina (amarilla) 1200x550x4,0 mm (5 pcs)
1 x	Bolsa vacio 1200 mm x 50 m
1 x	AIREX® M060 lámina (amarilla) 1200x550x6,0 mm (5 pcs)
1 x	Led (blanco - 2 pcs)
1 x	Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Varilla acero Ø 14,0 mm x 1000 mm
1 x	Gorra Hispano Aviación
1 x	Chaqueta Hispano Aviación
1 x	Plancha contrachapado Abedul 600x300x8,0 mm
1 x	Listón de BALSA 4,0x4,0x1000 mm
1 x	Plancha de balsa 2,5x100x1000 mm
1 x	Plancha contrachapado Abedul 600x300x6,0 mm
1 x	Plancha contrachapado Abedul 600x300x1,5 mm
1 x	Horn aluminio roscado 6 mm con rótula
1 x	Plancha contrachapado Abedul 600x300x1,5 mm
1 x	Varilla acero Ø 0,5 mm x 1000 mm
1 x	Varilla acero Ø 7,0 mm x 1000 mm
1 x	Varilla latón Ø 0,5 mm x 1000 mm
1 x	Varilla latón Ø 1,0 mm x 1000 mm
1 x	Sensor digital Air Speed con Pitot
1 x	Varilla acero roscada M3 -1m
1 x	Varilla latón hexagonal Ø 3 mm x 1000 mm
1 x	Modulo PPM Encoder
1 x	Reenvío de Profundidad 70x28 mm "tipo Kato"
1 x	Horn extra largo 60x30
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm
1 x	Horn largo de latón M2 para cable (10 pcs)
1 x	Horn DUBRO 1/2A
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm
1 x	Horn de mando corto con rodamiento (2 pcs)
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm
1 x	Set acople ALU M2,5 Ø 4 (2 uds)
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 4 m
1 x	Capuchón M interruptor aluminio rojo
1 x	Cargador FUTABA SQN30W12P-08 220v
1 x	DUPLEX 2,4EX Expander E4
1 x	DUPLEX 2.4EX MFlow2 Gas 800
1 x	Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm
1 x	Pin 1,6 para terminales riostras M1,6 ⌀ (6 pcs)
1 x	Kwik link aluminio IZD. M3 L: 30mm (2 uds) pin Ø 2 mm
1 x	Regulador Ripmax QUANTUM 80A SBEC
1 x	Liston de BALSA 10 x 10 x 1000 mm
1 x	Ball link ALU M2/2 con rodamiento (1 pcs)
1 x	Listón triangular de BALSA 8x8x1000 mm
1 x	BEC Mini JETI
1 x	DUPLEX 2.4EX Central Box 220 + 2x Rsat2
1 x	Cable profesor/alumno JETI

4,033.99EUR