398.99EUR

DUPLEX 2.4EX Central Box 320
[JETCB320]

JETI Duplex 2.4EX Central Box 320

Product description and features
The Central Box 320 is designed for a complete management of multiple servos and two receiver batteries for a model with high security requirements. The Central Box 320 has an overload protection on each servo output, 8 channels for high-performance servos up to 60 kg / cm and 10 channels for standard servos up to 30 kg / cm. Especially for the use of powerful and power-hungry servos, the Central Box 320 has an aluminum housing for better cooling. The Central Box 320 offers true battery redundancy, DITEX servo telemetry, JETI EX telemetry and up to three receiver inputs (2x 2.4GHz and 1x 900MHz) for full power and RF signal redundancy.
Configuration via JETI Duplex DS/DC transmitters
With JETI Duplex DC/DS transmitters, the full potential of the Central Box 320 can be fully exploited. The device overview of the JETI Duplex DS/DC transmitter makes it easy to perform the entire configuration of the servo outputs, DITEX servo and JETI EX telemetry, function assignment, and more.

Compatibility with Futaba
The Central Box 320 can also be used with two S.Bus receivers (e .g Futaba R7003SB). Setting up and reading out the telemetry values must, however, be realized with a separatly available JETIBOX.
Switching on and off
The switching on and off process of the Central Box 320 is done with the supplied magnetic switch.
Recommended receivers
As receiver e. g. 2 RSat2 or REX3 receivers can be used. Optionally, the use of a REX Assist receiver in combination with a RSat2 receiver is possible, so you get a Central Box with gyro stabilization.

Features
Adjustable powerful BEC for voltage stabilization (connection of standard or HV servos)
DITEX servo telemetry support
Possibility to connect up to 3 receivers with serial communication
built-in Expander function with the possibility of independent connection of up to four JETI EX sensors
Input for magnetic switch or RC switch
Power supply batteries connected via MPX connector
100Hz mode of servo outputs (10ms period)
EX telemetry support (measurement of voltage, current, capacity, temperature, etc.)
Easy settings changes via DC/DS transmitter („Device explorer“)
Robust metal construction with mounting holes

temporarily out of stock

Reviews

Quick Find

Shopping Cart

1 x	Interface Realflight Simulator
1 x	EasyFLY Addon
1 x	Simulador RealFlight RF-9.5 S (sin emisora)
2 x	GameCommander USB Universal
1 x	Interface Jack Adapter IKARUS
1 x	Marker ties (20 pcs)
1 x	Cinta Goldfix 1m
1 x	20x200 mm battery rings
1 x	SE Ring 300 mm (2 pcs)
2 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
2 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	SE Ring 240 mm (2 pcs)
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Foil for sticking flaps and ailerons
2 x	20x1000 mm Ring Strap Back To Back
1 x	SE Ring 200 mm (2 pcs)
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
2 x	SE Ring 350 mm (2 pcs)
2 x	SE Ring 480 mm (2 pcs)
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Spikes Band (5 m)
1 x	SE Ring 450 mm (2 pcs)
1 x	Tape GFK 38 mm
1 x	Pine wood slat 3.0x5.0x1000 mm
1 x	Beech dowels 2.0 x 1000 mm
1 x	BALSA trip 8.0x8.0x1000 mm
1 x	BALSA triangular 8x8x1000 mm
1 x	BALSA trip 5.0x5.0x1000 mm
2 x	Mahogany wood slat 3.0x3.0x1000 mm
2 x	Beech dowels 3.0 x 1000 mm
1 x	BALSA trip 4.0x4.0x1000 mm
2 x	BALSA trip 3.0x3.0x1000 mm
2 x	Liston HAYA 10 x 10 x 1000 mm
2 x	BALSA triangular 15x15x1000 mm
1 x	servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x	Premium servo extension 25cm
1 x	Prolongador S-Bus JR/JR 20cm
1 x	Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x	Extension S-Bus 1-2 silicon 120 cm FUTABA
2 x	Strip 2,5x1,25x330 mm
1 x	Extension 7.5 cm
1 x	Extension silicon 35 cm male (Futaba)
1 x	Round Rod 2,5x1000 mm
1 x	200 mm extensión servo HITEC/JR
1 x	silicon 100 cm Futaba Extension Ø 0,35 mm
1 x	ABS Strip 1.5x3.0x1000 mm
1 x	Extension 100 cm (Futaba)
1 x	Circlick securite
2 x	ABS Strip 1.0x5.0x1000 mm
1 x	1,2x1000 mm 2:1 red termoretract tube
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Ferrita 27x14x7 mm
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
2 x	Tape GFK 25 mm
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	Ring 320 mm length (5 pcs)
1 x	SE Ring 400 mm (2 pcs)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Helices DJI Mavic Air STEALTH "Black" (4x Ud)
2 x	Trailing edge BALSA 35x8x1000 mm
1 x	PowerPack 2.5X2 PRO
1 x	RF9 Flight Simulator with Spektrum Controller
2 x	Linden wood slat 2.0x2.0x1000 mm
1 x	Liston HAYA 3 x 10 x 1000 mm
1 x	Balsa panel 2.0x100x1000 mm
1 x	BALSA leading edge 8x10x1000 mm
1 x	Birch plywood plate 600x300x4.0 mm
1 x	Balsa panel 3.0x100x1000 mm
1 x	Plywood sheet BEECH 600 x 300 x 2,0 mm
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	Balsa panel 4.0x100x1000 mm
1 x	Birch plywood plate 600x300x2.5 mm
1 x	Pine wood slat 3.0x10.0x1000 mm
1 x	OBECHI sheet 2.0x3.0x1000 mm
1 x	Lite Plywood panel 600x300x3.0 mm
1 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	Birch plywood plate 600x300x1.2 mm
1 x
1 x	Strip 3,5x1,75x330 mm
1 x	Strip ABS 2.0x3.0x1000 mm
1 x	ABS Strip 1.0x2.0x1000 mm
1 x	Round Rod 3,0x1000 mm
1 x	ABS Strip 1.5x4.0x1000 mm
1 x	Strip ABS 2.0x8.0x1000 mm
1 x	Round Rod 5,0x1000 mm
1 x	Strip ABS 2.0x10.0x1000 mm
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	3.2 mm Prop Adapter M6
1 x	28 mm turnbuckle
1 x	3 mm Prop Adapter M6
1 x	300x4 mm M4 shaft ship
1 x	3,2 mm Prop Adapter M6
1 x	Xoar Electric Beechwood Prop 12x6
1 x	2 mm Prop Adapter M6
1 x	25,0 mm 3-BL M4 hydro-propeller (left hydropropeller)
1 x	Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CCW th
1 x	Sanyo Eneloop AA 1,2 V battery 2000 mAh
1 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x	Hot Glue Stick BLACK
1 x	Starter 12v (Max 180 and 30ccm)
1 x	Sanyo Eneloop AAA 1,2 V battery 800 mAh
1 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x	EVP Unit for AXI2208/xx and 2212/xx
1 x	VPP system propeller for AXI VPP motors (spare)
1 x	Xoar Electric Beechwood Prop 22x10
1 x	Xoar Electric Beechwood Prop 21x10
1 x	Xoar Electric Beechwood Prop 15x8
1 x	3 mm Leader (L 100 mm)
1 x	11x7 tree blades propeller
1 x	Xoar Electric Beechwood Prop 24x8
1 x	2,3 mm Prop Adapter M6
1 x	15x7 tree blades propeller LEFT
1 x	3 mm Prop Adapter M6
1 x	250 mm / 16 mm Airbrakes
1 x	16x10 tree blades propeller Master Airscrew
1 x	3.2 mm Prop Adapter M8
1 x	10 mm Prop Adapter M12
1 x	12 mm mast holder
1 x	12x8 tree blades propeller
1 x	Xoar Electric Beechwood Prop 20x10
1 x	10x7 tree blades propeller
1 x	25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller)
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	2,3 mm Prop Adapter M6
1 x	2.3 mm Adapter for 30 mm spinners
1 x	14 mm portholes (10 pcs)
1 x	Boomerang SPRINT V2 Yellow/Black
1 x	RANGER Jet NAVY 1.854mm combo
1 x	TURBINATOR 2 RED/WHITE 1778 mm Combo
1 x	TURBINATOR 2 BLUE AND YELLOW 1778 mm Combo
1 x	Boomerang ELAN STARS & STRIPES Combo
1 x	RANGER Jet Red/Yellow 1.854mm combo
1 x	RANGER Jet CANADA 1.854mm combo
1 x	RANGER Jet Red/White 1.854mm combo
1 x	BULL MØ1 2.600mm BLUE
1 x	AXI 2204 Multicopter
1 x	1804 2400KV Brushless Motor Qav 250 mini
1 x	BULL MØ1 2.600mm "McLAREN-GULF"
1 x	BULL MØ1 2.600mm (mono color)
1 x	ESC ALPHA 60A HV
1 x	T-Motor U7-V2.0 Kv420
1 x	BULL MØ1 2.600mm YELLOW
1 x	Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CW thr
1 x	Professional Servo tester
1 x	Servo KST BLS815 HV V2.0 Servo 20mm 70g 20Kg
1 x	Servo KST MS825 V8.0 35kg 8.4v
1 x	Servo KST A15-1810 20kg/cm@8.4V / Coreless Motor
1 x	DUPLEX 2.4EX MFlow2 Gas 800
1 x	Combo KAVAN PRO 3536-1000 + RAY 40 SB
1 x	DUPLEX 2.4EX Expander E4
1 x	DUPLEX 2.4EX MUI 150 Sensor
1 x	DUPLEX 2,4EX Stick with 3-Position Switch for Transmitter DC/DS
1 x	Battery LiPo GRE18 600 mAh 7.4v
1 x	Servo MKS 6100 DS
1 x	Slave-cable USB Easy Sim
1 x	SIMtransmitter 6 Mode 2
1 x	Servo KST DS125MG servo ala 10mm 28g 7Kg
1 x	Servo KST HS08A Wing Servo - 5.2Kg.cm 0.11s 11.0g 8mm
1 x	Servo KST BLS825 V8.0 HV 35Kg 8.4v
1 x	Battery LiFe TopFuel 3100 mAh 3s MTAG 30C
1 x	Servo KST X15-1208 V8.0 13.5Kg HV
1 x	Servo KST A08H V6.0 3,2Kg HV
1 x	Connectors banna oro 2 mm (M/F)
1 x	DJI Mavic Air Fly More Combo
1 x	Engine mounts for .09 - .19 engine
1 x	Combustible Glow "KAVAN" air/heli 15% nitro
1 x	40 mm servo arm with bearing (2 pcs)
1 x	DUPLEX 2.4EX Central Box 220 + 2x Rsat2
1 x	DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch
1 x	Pin hinge 26x11 mm (10 uds)
1 x	DUPLEX 2.4EX MUI 75
1 x	DUPLEX 2.4EX RC Power Switch 10

38,371.49EUR