534.01EUR

DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch
[JETCB3202+]

JETI DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch

Product description and features
The Central Box 320 is designed for a complete management of multiple servos and two receiver batteries for a model with high security requirements.The Central Box 320 has an overload protection on each servo output, 8 channels for high-performance servos up to 60 kg / cm and 10 channels for standard servos up to 30 kg / cm. Especially for the use of powerful and power-hungry servos, the Central Box 320 has an aluminum housing for better cooling. The Central Box 320 offers true battery redundancy, DITEX servo telemetry, JETI EX telemetry and up to three receiver inputs (2x 2.4GHz and 1x 900MHz) for full power and RF signal redundancy.

Configuration via JETI Duplex DS/DC transmitters
With JETI Duplex DC/DS transmitters, the full potential of the Central Box 320 can be fully exploited. The device overview of the JETI Duplex DS/DC transmitter makes it easy to perform the entire configuration of the servo outputs, DITEX servo and JETI EX telemetry, function assignment, and more.

Compatibility with Futaba
The Central Box 320 can also be used with two S.Bus receivers (e .g Futaba R7003SB). Setting up and reading out the telemetry values must, however, be realized with a separatly available JETIBOX.

Switching on and off
The switching on and off process of the Central Box 320 is done with the supplied R/C switch.

Recommended receivers
Two compatible RSat2 receivers are included. Optionally, the use of a REX Assist receiver in combination with a RSat2 receiver is possible, so you get a Central Box with gyro stabilization.

Features
Adjustable powerful BEC for voltage stabilization (connection of standard or HV servos)
DITEX servo telemetry support
Possibility to connect up to 3 receivers with serial communication
built-in Expander function with the possibility of independent connection of up to four JETI EX sensors
Input for magnetic switch or RC switch
Power supply batteries connected via MPX connector
100Hz mode of servo outputs (10ms period)
EX telemetry support (measurement of voltage, current, capacity, temperature, etc.)
Easy settings changes via DC/DS transmitter („Device explorer“)
Robust metal construction with mounting holes

temporarily out of stock

Reviews

Quick Find

Shopping Cart

1 x	Cap Hispano Aviación
1 x	Vest clothes Hispano Aviación
1 x	Carbon fiber rod 1.0 mm x 1000 mm
1 x	Carbon fiber rod 0.5 mmx1000 mm
2 x	Carbon fiber rod 3.0 mm x 1000 mm
1 x	Carbon fiber rod 20 mmx1000 mm
2 x	Carbon fiber rod 2.5 mmx1000 mm
1 x	Carbon fiber rod 6.0 mmx1000 mm
1 x	Carbon fiber rod 5.0 mmx1000 mm
1 x	Carbon fiber rod 1.5 mm x 2000 mm
1 x	Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
2 x	Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	Carbon fiber rod 10 mm x 1000 mm
1 x	Squared carbon wing joinner 5x5x220 mm
1 x	Carbon fiber rod 1.5 mm x 1000 mm
2 x	Carbon fiber rod 12 mm x 1000 mm
1 x	Carbon fiber rod 8.0 mmx1000 mm
1 x	Carbon fiber rod 16 mm x 1000 mm
1 x	Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x	USB Mini Camera endoscope
1 x	Brake for 140 mm wheels
1 x	Kit hydraulic brake
1 x	Foil for sticking flaps and ailerons
2 x	SE Ring 250 mm (2 pcs)
2 x
1 x	SE Ring 480 mm (2 pcs)
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	White smoke bombs AX-60 (5 pcs)
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Conector BEC female (10 pcs)
1 x	Tap FESTO 4-4 mm
1 x	Crimping sleeves for 1.1 mm cable (10 pcs)
1 x	Silicone 0,50 qmm servos wire Graupner(100 m)
2 x	Duplex 2.4EX tray transmitter DC-16 II Black multimode
2 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x	Transmitter Balancer HITEC Aurora 9, JR and Spectrum (blue)
2 x	Carbon fiber rod 4.0 mmx1000 mm
1 x	TX-Tray V1 (L) (Black)
1 x	DUPLEX 2.4EX Central Box 220
1 x	Suncover 100cc Red
1 x	DUPLEX 2.4 EX MVario2
1 x	Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
2 x	PPM to Jack link - Tx Black (mono) DC/DS Tx DUPLEX 2,4EX
1 x	COPILOT Multiplex
1 x	40 mm servo arm with bearing (2 pcs)
1 x	Servo GO-1053 MG 20.0kg
1 x	Black tray 2,4EX DC-16/14/24 black
1 x	Servo holder for retract
1 x	Futaba 14/20 mm servo pull-pull double arm with ball link
1 x	DUPLEX 2,4EX Stick with 2-Position Switch for Transmitter DC/DS
1 x	Neck strap JETI DS
1 x	Servo arm with 6 mm hole to FEMA 9800A
1 x	Caps multicolor Switch JETI
1 x	Futaba 52 mm servo arm
1 x	SERVO DES 707 BB MG, Pignons
1 x	DS-12/14/16 - Black nuts for upper switches - Front panel (2pcs)
1 x	Switch for DS: Long 3 Position
1 x	Blade Holder Full (4 blades)
1 x	Servo GO-1013 MG 3.8kg
1 x	Hitec 52 mm servo arm
1 x	Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor)
1 x	SERVO DES 658 BB MG
1 x	Stick with Button DC/DS-16/14/24 Tx DUPLEX 2,4EX
1 x	DUPLEX 2,4EX Stick with Potentiometer for Transmitter DC/DS
1 x	Futaba 24/30 mm servo pull-pull double arm with ball link
1 x	Servo AN-20 MGBBA
1 x	Switch Button DS Tx DUPLEX
1 x	Carbon fiber rod 7.0 mmx1000 mm
1 x	Futaba 25 mm servo arm with ball link
1 x	Hitec 38 mm servo arm with ball link
1 x	JETI Counter for DC-16 (Blue)
1 x	switch 1-Spring-DOWN 3-position DS Tx DUPLEX 2,4EX
1 x	Hitec 46 mm servo arm with ball link
1 x	Servo GO-1035MG 16 kg.cm 0.08s/60º
1 x	Futaba 2x20 mm servo double arm
1 x	LA500 pre-rotation gear
1 x	Servo TOPMODEL S7520 MG
1 x	Head core bushing
1 x	Servo KST BLS815 HV V2.0 Servo 20mm 70g 20Kg
1 x	Shirt Hispano Aviación
1 x	Nut M1,6
1 x	Blade holder upper
1 x	LA500 housing-lower cyclic
1 x	Soporte servo KST X10 mini / DS135MG
1 x	LA500 Blades
1 x	LA500 housing-upper cyclic
1 x	Servo KST X20 8.4-50 V8.0 45kg 8.4v Softstar
1 x	Servo KST A15-1810 20kg/cm@8.4V / Coreless Motor
1 x	Head core
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Carbon fiber flat 1000x6.0x0.8 mm
1 x	Yellow smoke canister 140 g
1 x	SE Ring 330 mm (4 pcs)
1 x	SE Ring 200 mm (2 pcs)
1 x	Big-Malibu XL Roof box with surfboard rack GREY
1 x	Straightened rod Ø 1.5 mm x 1500 mm
1 x	Aluminium rod Ø 4.0 mm x 3000 mm
1 x	Tren de cola carbono 50-70cc
1 x	Tail wheel for 8-12 kg models
1 x	28 mm tailwheel unit
1 x	20x1000 mm Ring Strap Back To Back
1 x	SE Ring 350 mm (2 pcs)
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	20x200 mm battery rings
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	SE Ring 240 mm (2 pcs)
1 x	Tape GFK 50 mm
1 x	SE Ring 400 mm (2 pcs)
1 x	DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch
1 x	DUPLEX 2.4EX MU 3 Sensor
1 x	DSM 10 Dual Switch Mixer
1 x	DUPLEX 2.4EX Central Box 220 + 2x Rsat2
1 x	Battery RX JETI LiIon RB 2600 7.2v

8,715.34EUR