534.01EUR

DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch
[JETCB3202+]

JETI DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch

Product description and features
The Central Box 320 is designed for a complete management of multiple servos and two receiver batteries for a model with high security requirements.The Central Box 320 has an overload protection on each servo output, 8 channels for high-performance servos up to 60 kg / cm and 10 channels for standard servos up to 30 kg / cm. Especially for the use of powerful and power-hungry servos, the Central Box 320 has an aluminum housing for better cooling. The Central Box 320 offers true battery redundancy, DITEX servo telemetry, JETI EX telemetry and up to three receiver inputs (2x 2.4GHz and 1x 900MHz) for full power and RF signal redundancy.

Configuration via JETI Duplex DS/DC transmitters
With JETI Duplex DC/DS transmitters, the full potential of the Central Box 320 can be fully exploited. The device overview of the JETI Duplex DS/DC transmitter makes it easy to perform the entire configuration of the servo outputs, DITEX servo and JETI EX telemetry, function assignment, and more.

Compatibility with Futaba
The Central Box 320 can also be used with two S.Bus receivers (e .g Futaba R7003SB). Setting up and reading out the telemetry values must, however, be realized with a separatly available JETIBOX.

Switching on and off
The switching on and off process of the Central Box 320 is done with the supplied R/C switch.

Recommended receivers
Two compatible RSat2 receivers are included. Optionally, the use of a REX Assist receiver in combination with a RSat2 receiver is possible, so you get a Central Box with gyro stabilization.

Features
Adjustable powerful BEC for voltage stabilization (connection of standard or HV servos)
DITEX servo telemetry support
Possibility to connect up to 3 receivers with serial communication
built-in Expander function with the possibility of independent connection of up to four JETI EX sensors
Input for magnetic switch or RC switch
Power supply batteries connected via MPX connector
100Hz mode of servo outputs (10ms period)
EX telemetry support (measurement of voltage, current, capacity, temperature, etc.)
Easy settings changes via DC/DS transmitter („Device explorer“)
Robust metal construction with mounting holes

temporalmente fuera de stock

Comentarios

Búsqueda Rápida

Cesta de Compras

3 x	EasyFLY Addon
2 x	Servo Controller Fibra optica
1 x	SERVO DES 588 BB MG
1 x	Aerofly Professional Expansion Pack Vol. 1 PC-DVD
1 x	Sistema de paso variable 3D Indoor
1 x	Perfil de ABS cuadrado 3 x 1000 mm
1 x	Bayoneta aluminio ø30×1 mm x 1m
1 x	Soporte para aviones SebArt
2 x	Cartucho de humo Blanco 100 g
1 x	Sistema cierre 360 mm con abrazadera (2 pcs)
1 x	Oracover Rojo Ferrari (2 m)
2 x	Cinta alerones 1m x 10mm
2 x	Modulo PPM Encoder
1 x	Termo-retráctil azul tubo de 6,4x1000 mm 2:1
2 x	Sistema cierre 300 mm con abrazadera (2 pcs)
1 x	Varilla acero Ø 1,0 mm x 1000 mm
1 x	Arandela conica ancha alumino M3 oro (4 pcs)
1 x	Pasta universal color Blanco (RAL 9003) 1 Kg
1 x	Cable BEC 30 cm (macho)
2 x	Varilla ABS 1,5x1000 mm
1 x	Arandela conica alumino M3 verde (8 pcs)
1 x	Pasta universal color Jet Black 50 g
1 x	Bisagra de aluminio tipo PIN 3,0x50 mm (2 pcs)
1 x	Pasta universal color blanco 50 g
1 x	Liston ABS 1,5x4,0x1000 mm
1 x	CC 03
1 x	Bisagra de compuerta negra 30x16 mm (2 pcs)
1 x	Liston ABS 2.0x10.0x1000 mm
1 x	Varilla acero roscada M2 - 1m
1 x	Pasta para estaño 20 g
1 x	Liston ABS 1,5x8,0x1000 mm
1 x	Bisagra cilíndrica 2,5 Ø x 8 x 33 mm (10 pcs)
1 x	GameCommander USB Universal
1 x	Disco Corte Proxxon/Dremmel 22 mm
1 x	Conector XT-150 6mm (Set: 5 pares)
1 x	Piloto WWII US Navy Pacific 12" Sclae 1/6-1/5
1 x	Conector banana oro 2,5 mm (pareja)
1 x	Conector banana oro 3 mm
1 x	Fresa corte diamante Ø 1.0mm (bola)
1 x	Extension silicona 30 cm macho (Graupner)
1 x	Fresa corte diamante Ø 2.3mm (bola)
1 x	Prolongador silicona 100 cm (Graupner)
2 x	Prolongador S-Bus 1-2 silicona 30 cm
1 x	Soporte soldadura universal aluminio
1 x	Conector XT-30 (macho)
1 x	Medidor digital de peso, equilibrio y angulos BASIC
1 x	Prolongador cable servo POWERBOX 100cm
1 x	Conector banana oro 2 mm (Ultralight)
2 x	Prolongador Futaba hembra 40 cm de silicona
1 x	Conector FUTABA Servo hembra (10 pcs)
1 x	Piloto 1/6 "Garry"
1 x	Piloto civil "Joe" tamaño 9cm (Slimline)
1 x	Tijera curva PREMIUM 16 cm
1 x	Conector JR/Uni Servo macho BLUE silicon (10 pcs)
1 x	Bascula precision 0.1-2000 g
1 x	Piloto militar "Kamikaze" tamaño 9cm (Slimline)
1 x	Piloto "Goose" (Slimline)
1 x	Destornillador allen 1,5x50 mm molibdeno
1 x	Prolongador silicona 10 cm (Graupner)
1 x	Prolongador PVC 150 cm (Graupner)
1 x	Conector JR Servo hembra (10 pcs)
1 x	Conector banana oro 2,5 mm (100 parejas)
1 x	Fresa corte diamante Ø 2.35mm (lentil)
1 x	Piloto "Anthony" (Slimline)
1 x	Prolongador JR/Graupner hembra 40 cm de silicona
1 x	Conector MR-60 (pareja)
1 x	Cable silicona hembra batt. receptor 30 cm (Futaba)
1 x	Extension silicona 30 cm hembra (Graupner)
1 x	Prolongador silicona 50 cm (Futaba)
1 x	Programador 5v SIO RS 232
1 x	Juego de 3 palas
1 x	Cola en V SILENT DREAM 2.200 mm (Elec ó Planeador)
1 x	Bancada motor clase 48"
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Aceite para hacer humo 3l Smoke
1 x	Cartucho de humo Blanco 65 g
1 x	Rueda KOVO SLH 120x60 mm
1 x	Elevador Cierva C30
1 x	Housing-upper del cíclico LA500
1 x	Corona pre-rotación LA500
2 x	Sistema cierre 450 mm con abrazadera (2 pcs)
1 x	Sistema cierre HACKER 300 mm con abrazadera (2 pcs)
1 x	Sistema cierre 480 mm con abrazadera (2 pcs)
1 x	Sistema cierre 320 mm largo (5 pcs)
2 x	Cinta Goldfix 1m
2 x	Sistema cierre 400 mm con abrazadera (2 pcs)
1 x	Oracover Rojo 2 m
1 x	PVC termo-retráctil batería 68 mm azul transparente (10 m)
1 x	PVC termo-retráctil batería 85 mm transparente (1 m)
1 x	Liston ABS 1,0x2,0x1000 mm
3 x	Cinta autoadhesiva 10 mm x 12m; Diente 0.5 mm
1 x	Abrazadera con letrero (20 pcs)
1 x	Sistema cierre 200 mm con abrazadera (2 pcs)
1 x	Bridas 1,66x71 / 0,07x2,8"mm (20 pcs)
1 x	Cinta fibra vidrio 38 mm
1 x	Soporte para bridas hasta 3 mm (0,12") para tornillo M3 (10 pcs)
1 x	Cinta tubuladora (5 m)
1 x	Sistema doble de alimentación RX
1 x	Cinta autoadhesiva 26 mm x 16.80m; Diente 1.0 mm
1 x	Cinta autoadhesiva 13 mm x 16.80m; Diente 0.5 mm
1 x	Cinta adhesiva impermeable, ancho 19 mm, largo 25 m
1 x	Sistema cierre 250 mm con abrazadera (2 pcs)
1 x	Sistema cierre 330 mm con abrazadera (4 pcs)
1 x	Cinta autoadhesiva 5 mm x 16.80m; Diente 0.5 mm
1 x	Cinta SURFACE 21mm x 5m
1 x	Sistema cierre baterías 20x200 mm
1 x	Cinta fibra vidrio 50 mm
1 x	Sistema cierre 240 mm con abrazadera (2 pcs)
1 x	Cinta autoadhesiva 20 mm x 12m; Diente 1.0 mm
1 x	Oracover Verde 10 m
1 x	PROFICOVER 5m
1 x	Thixotropic agente TM100, tin/415g (aprox. 5 L)
1 x	Oracover Amarillo CUB 10 m
1 x	PVC termo-retráctil batería 45 mm naranja transparente (1 m)
1 x	Oratex Antik 2m
1 x	Oracover Amarillo CADMIO 10 m
1 x	Microbalones (0,12 g) 350 ml
1 x	Oracover Amarillo CUB 2 m
1 x	PVC termo-retráctil batería 195 mm transparente (1 m)
1 x	Oracover Gris claro 2m
1 x	Ply-Span 450x600/13g Naranja
1 x	PVC termo-retráctil batería 68 mm rojo (10 m)
1 x	Oracover Naranja 2 m
1 x	PVC termo-retráctil batería 95 mm azul transparente (1 m)
1 x	Oratex Silver 2m
1 x	PVC termo-retráctil batería 70 mm transparente (10 m)
1 x	Oratex White 2m
1 x	Papel seda japones 12 grs/m2 760x510 mm JAPICO
1 x	Sensor digital Air Speed con Pitot
1 x	Oracover Blanco 10 m
1 x	Polvo de algodon 500g
1 x	Thixotropic agente TM100, tin/75g (aprox. 1 L)
1 x	PVC termo-retráctil batería 51 mm transparente (1 m)
1 x	Thixotropic agente tin/15g (aprox. 350 ml)
1 x	PIX Hawk con accesorios
1 x	Rueda de cola para clase 20/60
1 x	Cierre cabina
1 x	Rueda de cola para clase 60/120
1 x	Rueda de cola para modelos de 1 a 3 kg
1 x	Rueda de cola para modelos de 5 a 8 kg
1 x	Liston ABS 2.0x5.0x1000 mm
1 x	Varilla ABS 6,0x1000 mm
1 x	Liston ABS H 1,5x1,5x330 mm
1 x	Liston ABS H 2,0x2,0x330 mm
1 x	Varilla ABS 1,25x1000 mm
1 x	Conector XT-90 (pareja)
1 x	Conectores Kontronik (10 conectores, 5 pares)
1 x	Soporte conector MPX hembra (6 pcs)
1 x	Conector MULTIPLEX hembra 30 cm
1 x	Prolongador 30 cm (Futaba)
1 x	Conector MPX negro macho
2 x	Soporte de seguridad MPX (5 pcs)
1 x	Soporte de seguridad conector MPX (4 pcs)
1 x	Pletina MPX 8 pines (5 uds)
1 x	Conector XT-60 (hembra)
1 x	Soporte conector MPX (2 pcs)
1 x	Conector MPX negro hembra
1 x	Conector MR30 (macho)
1 x	Pletina MPX (5 pcs)
1 x	Prolongador silicona 25 cm (Graupner)
1 x	Extension silicona 30 cm hembra (Futaba)
1 x	Prolongador silicona 75 cm (Futaba)
1 x	Soporte carbono MR30 (2 pcs)
1 x	Funda conector 2 mm
1 x	DINAMOETRO S-1580
1 x	Cabeza Rotora Completa (4 palas)
1 x	Taco goma 11 mm (14 pcs)
1 x	Arandela conica alumino M3 rojo (8 pcs)
1 x	Iniciadores eléctricos cohetes (6 pcs)
1 x	Conexión alas 2 servos JR/Graupner 50 cm
1 x	Soporte para bridas de hasta 3 mm (10 pcs)
1 x	Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x	Soporte grifo FESTO (2 pcs)
1 x	Soporte para cables S 6 mm (10 pcs)
1 x	Juego de 4 palas
1 x	Ball link aluminio M3 V1 azul (10 pcs)
1 x	Ball link aluminio M3 V1 rojo (10 pcs)
1 x	Círculo autoadhesivo 10 mm (72 pcs)
1 x	Soporte trasero 20 mm para motor gasolina
1 x	Soporte trasero 15 mm para motor gasolina
1 x	Prolongador 15 cm (Futaba)
1 x	Cable silicona macho batt. receptor 30 cm (Graupner)
1 x	Rueda 89x32 (3.5") centro aluminio eje Ø5 mm
1 x	Rueda KOVO espuma dura 73x24 mm (2 pcs)
1 x	Cable telemetría ALTIS 12 cm
1 x	Monokote PLATINO metalizado (1.8x0.65m)
1 x	Capuchón BOSCH para bujía DA 50-R, DA 100 y DA 150
1 x	Cilindro ZG-26SC/SLH
1 x	Arillo ZG-20
1 x	Anemometro Xplorer4
1 x	USB cable ALTIS
1 x	PVC termo-retráctil batería 135 mm transparente (1 m)
1 x	Covertor JETI DUPLEX DS

4,863.69EUR