47.01EUR

Battery RX JETI LiIon RB 2600 7.2v
[HK22985491]

JETImodel Receiver Battery Power Ion 2600 2S1P

Power-Ion accumulators are battery packs suitable to power the receiv-er and servos in the model.
The main advantages of Power-Ion accumulators include high mechanical resistance due to keeping in a metal case. The accumulators are also characterized by a long cycle life. No balancer is needed for their operation and in case the current is higher than 150A, short circuit protection is activated. Overcharge protection is activated if the charging voltage is higher than 5V per cell.

The accumula-tors are functional even at very low or very high temperatures (-10 - +60°C).
Each pack is provided with one two-wire cable with the JR connector for charging and with one two-wire cable with the MPX connector for connection to the model. Both cables are of the same length.
The accumulators are supplied in a plastic case and are fastened to it by tires. The case itself is screwed to a model using anti-vibration rubber grommets, see the picture below. Pay attention to correct placing of the brass washer. Its wider part should be in contact with the assembly board to which the battery case is mounted to avoid extruding the material.

temporarily out of stock

Reviews

Customers who bought this product also purchased

PVC 0,08 qmm Futaba servos wire (5 m)

temporarily out of stock

14x60 mm Mini rings Tie Wraps (4 pcs)

temporarily out of stock

Quick Find

Shopping Cart

1 x	Aluminium wide washer M3 red (4 pcs)
2 x	Circlik for shaft 2.3 mm (10 pcs)
2 x	Circlik for shaft 1.9 mm (10 pcs)
1 x	Spring lock washer 3.1 mm (20 pcs)
1 x	Aluminium cap bolt washer M4 green (8 pcs)
1 x	Circlik for shaft 1.2 mm (10 pcs)
2 x	Flat washer 2.2 mm (20 pcs)
1 x	Spring lock washer 2.6 mm (20 pcs)
1 x	Quicklock washer 2.5 mm (10 pcs)
1 x	Aluminium cap bolt washer M3 black (8 pcs)
2 x	Servo NARO Max Std
2 x	2000A 12V Lithium Jump Starter with 150PSI Air inflator
2 x	Aluminium wide washer M4 Gold (4 pcs)
1 x	Aluminium cap bolt washer M3 green (8 pcs)
3 x	Flat washer 2.7 mm (20 uds)pcs)
1 x	Aluminium wide washer M4 Black (4 pcs)
2 x	Aluminium cap bolt washer M3 red (8 pcs)
2 x	Lock washer 3.2 mm (20 pcs)
3 x	Spring lock washer 2.1 mm (20 pcs)
1 x	Aluminium wide washer M3 blue (4 pcs)
1 x	M3-M4 rubber washer (8 pcs)
2 x	Lock washer 2.7 mm (20 pcs)
1 x	Aluminium cap bolt washer M3 blue (8 pcs)
2 x	Glases Nimbus
1 x	Glases Aspen
1 x	Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
1 x	U Profile ABS 1,0x2,0x1000 mm
1 x	Profile ABS Square 1 x 1000 mm
1 x	ABS "T" angle 4.0x4.0x1000 mm
1 x	ABS "T" angle 6.0x6.0x1000 mm
2 x	ABS angle 10,0x10,0x1000 mm
1 x	U Profile ABS 3,0x6,0x1000 mm
2 x	Profile ABS Square 2 x 1000 mm
3 x	U Profile ABS 8,0x4,0x1000 mm
2 x	Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x	Profile ABS half cane 2.0x1000 mm
2 x	Profile ABS half cane 2.5x1000 mm
1 x	ABS "T" angle 10.0x10.0x1000 mm
1 x	T-Connector 4.0 mm x 1000 mm
1 x	Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x	Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
2 x	L-Connector 4.0 mm x 1000 mm
1 x	Profile ABS Square 3 x 1000 mm
1 x	Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x	ABS angle 3,0x3,0x1000 mm
1 x	U Profile ABS 5,0x10,0x1000 mm
3 x	Flat Connector 4.0 mm x 1000 mm
1 x	ABS angle 4,0x4,0x1000 mm
1 x	L-Connector 1.5 mm x 1000 mm
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	Adapter lead MPX/EC3
1 x	Long ball link M2 (6 uds)
1 x	Short ball link M3 (6 uds)
1 x	EasyFLY Addon
1 x	10m servo "Premium" wire (white/red/blue)
1 x	Conector MT-60 (pair)
1 x	Anodized aluminium servo M4x5/8 screw (4 black pcs)
2 x	Hexagonal Nut M4 (20 pcs)
1 x	Screw M4x20 (10 pcs)
4 x	Flat washer 1.7 mm (20 pcs)
2 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	Screw M3x16 (10 pcs)
1 x	Quicklock washer 1.5 mm (10 pcs)
3 x	Lock washer 4.3 mm (20 pcs)
1 x	Quicklock washer 4 mm (10 pcs)
2 x	Aluminium wide washer M4 Blue (4 pcs)
2 x	Hexagonal Nut M3 (10 pcs)
1 x	Spring pin Ø 2 x 6 mm (10 pcs)
1 x	Threaded insert M6 (10 pcs)
1 x	Shirt Hispano Aviación
3 x	Nut for mounting M2 (4 pcs)
1 x	Actuador lineal HLS12-100210-7.4v
1 x	M2,5 5Diam metal ball link V3 (2 pcs)
1 x	Blades 330mm
1 x	Circlik for shaft 1.5 mm (10 pcs)
1 x	Glases Ace
1 x	Glases Stratus
2 x	Hovercraft sailcloth
1 x	TP/TopFuel - JST-EH 4/5S Adapter
1 x	2 LiPo XH>EH adapter
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	Male/Female prolonguer for Balancer Thunder Power 6S
1 x	Extension 5 lipos JST - JST/C
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Extension 2/3 lipos JST - JST/C
1 x	TrainerCord (master-learner)
1 x	Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	ABS tube 9.0x7.0x1000 mm
1 x	ABS tube 8.0x7.0x1000 mm
1 x	ABS tube 18.0x16.0x1000 mm
1 x	ABS tube 14.0x10.0x1000 mm
1 x	Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
1 x	ABS tube 9.0x8.0x1000 mm
1 x	Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x	ABS tube 10.0x8.0x1000 mm
1 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	ABS tube 20.0x18.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	ABS tube 3.0x2.0x330 mm
1 x	Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	ABS tube 8.0x6.0x1000 mm
1 x	ABS tube 5.0x4.0x156 mm
1 x	4 LiPo XH>EH adapter
2 x	3 LiPo XH>EH adapter
1 x	Lock nut aluminium M2.5 (4 pcs)
1 x	Lock nut aluminium M2 (4 pcs)
1 x	Extinguisher CO2 - 2 Kg
1 x	Carbon servo arms for HITEC HS 65 (4 pcs)
1 x	MIG 29 3D RTF, Servo
1 x	Red aluminium servo arm V1-Futaba 20 mm M2
1 x	Soporte metal para servos
2 x	L-Connector 1.0 mm x 1000 mm
2 x	ABS "T" angle 2.0x2.0x1000 mm
2 x	ABS angle 2,0x2,0x1000 mm
1 x	Device Terminal
2 x	Servo inverter
1 x	SAVOX SH 0254 servo
2 x	Profile ABS half cane 3x1000 mm
1 x	Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor)
1 x
1 x	Nylon Screw M4x20
1 x	Hexagonal Nut M1,6 (10 pcs)
1 x	Anodized aluminium servo M4x5/8 screw (4 lilac pcs)
1 x	Lock nut M6 (10 pcs)
2 x	Nut for mounting M5 (4 pcs)
1 x	Nut for mounting M3 (4 pcs)
3 x	Quicklock washer 3.5 mm (10 pcs)
2 x	Nut for mounting M2,5 (4 pcs)
1 x	Pan Head Screw M1,6x6 (10 pcs)
1 x	Aluminium M2x12 mm screw (4 pcs)
1 x	Blind nut M4 (4 pcs)
1 x	Hexagonal Nut M1 (10 pcs)
2 x	Lock nut M3 (10 pcs)
1 x	Anodized aluminium servo M4x5/8 screw (4 red pcs)
1 x	Hexagonal Nut M4 (10 pcs)
2 x	Blind nut M6 (4 pcs)
1 x	Anodized aluminium servo M4x5/8 screw (4 silver pcs)
1 x	Anodized aluminium servo M4x5/8 screw (4 blue pcs)
1 x	Hexagonal Nut M2 (10 pcs)
1 x	Nut for mounting M3 (10 pcs)
1 x	Treaded hexagonal socket insert M4 Br (4 pcs)
2 x	Threaded insert M5 (10 pcs)
1 x	Lock nut M5 (20 pcs)
2 x	Blind nut M3 (4 pcs)
1 x	Nut for mounting M6 (4 pcs)
1 x	Nylon Screw M5x30
2 x	Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 lilac pcs)
1 x	Servo M2x7/16 screw (4 pcs)
2 x	Hexagonal Nut M2.5 (10 pcs)
1 x	Nut for mounting M4 (4 pcs)
1 x	Lock nut M4 (10 pcs)
1 x	Circlik for shaft 3.2 mm (10 pcs)
1 x	Blind nut M2 (10 pcs)
1 x	T-Motor MN705-S Kv125 (pack 2 uds)
1 x	Autogyro Cierva C30 Spain
1 x	LA500 nose
1 x	Head lower part
1 x	20 g tin paste
1 x	SBEC Jeti
1 x	Selfstart electronic switch
1 x	4,8x1000 mm 2:1 black termoretract tube
1 x	Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm)
1 x	Carbon tube (L 1000 mm, Ø7 mm, Ø5 mm)
1 x	Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø27 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm)
1 x	Titanium M3x0,5x12 mm Flat Head screw (4 pcs)
1 x	Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm)
1 x	CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø14 mm, Ø12 mm)
2 x	Titanium M3x0,5x6 mm Flat Head screw (4 pcs)
1 x	Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs)
1 x	Servo M2x5/16 screw (4 pcs)
1 x	Gold aluminium servo arm V1-JR 1,25" inch M3
1 x	Red aluminium servo arm V3-Futaba 3-3,5inch
1 x	Servo HITEC D941 TW
1 x	Red aluminium servo arm V1-Futaba 17 mm M2
1 x	Steering lever
1 x	Rotorshape Elevator
1 x	Stickers-digit for marking
1 x	SBEC 40
1 x	6,4x1000 mm 2:1 blue termoretract tube
1 x	SPS Remote switch actuator
1 x	37 mm PVC transparent battery termo-retract (1 m)
1 x	Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm)
1 x	Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø6.1 m)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø20 mm, Ø18 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø18 mm, Ø16 mm)
1 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm)
1 x	Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm)
1 x	Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm)
1 x	Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm)
1 x	Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm)
1 x	Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm)
1 x	Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x	Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm)
1 x	Servo HITEC D131 MW nano
1 x	Servo HITEC HS-311
1 x	Red aluminium servo arm V1-Futaba 1,0" inch M2
1 x	Gear set HITEC HS-125MG/5125MG
1 x	Profile ABS triangular 6.0x1000 mm 90º
1 x	"L" servo arm 65x49 mm (2 pcs)
1 x	Gear carbonite set HITEC HS-6965
1 x	ALU double servo arm 3 mm shaft
1 x	Landing gear axle Ø 5 mm (2 uds)
1 x	Servo HITEC HS-225 BB
1 x	Gear set HITEC HS-311/322/325BB
1 x	Double aluminium servo arm V1-Futaba 2,5 inch M3 (red)
1 x	Profile ABS half cane 6.0x1000 mm
1 x	Red aluminium servo arm V1-Futaba 15 mm iM2
1 x	20-25mm Servo Arm
1 x	Gold aluminium double servo arm V3-JR 3.5 inch M3
1 x	Red aluminium servo arm V3-Futaba 1,0inch
1 x	Blue aluminium servo arm V3-Hitec 1,25inch M3
1 x	Profile ABS triangular 4.0x1000 mm 60º
1 x	ABS angle 6,0x6,0x1000 mm
2 x	Professional Servo tester
2 x	DUPLEX 2.4EX Expander E4
2 x	DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch
2 x	DUPLEX 2.4EX MAlti (Rev.2)
3 x	DUPLEX 2.4EX Central Box 320
2 x	DUPLEX 2,4GHz MRPM-AC EX
2 x	HITEC DPC-11 programmer
1 x	Threaded insert M3 (4 pcs)
1 x	Screw M3x12 (10 pcs)
1 x	Tapping Screw M2.2x13 (10 pcs)
1 x	Tapping Screw M2.9x13 (10 pcs)
1 x	Carbon tube (L 1000 mm, Ø5 mm, Ø3 mm)
2 x	Blue Aluminium lock nut M2 (4 pcs)
1 x	Lock nut M2.5 (10 pcs)
1 x	Lock nut M2 (20 pcs)
1 x	HPP-21 PLUS PC Programmer for Hitec Digital Servos
1 x	Battery RX JETI LiIon RB 5200 7.2v
1 x	DSM 10 Dual Switch Mixer
1 x	DUPLEX 2.4EX MUI 75
1 x	OPTIC 8 opto Rx-servo insulation
2 x	DUPLEX 2.4 EX MBar
1 x	DUPLEX 2,4GHz MRPM EX
1 x	Socket Screw M3x9 mm
1 x	Servo M2x9/16 screw (4 pcs)
1 x	Spring pin Ø 1 x 6 mm (10 pcs)
1 x	Screw M4x12 (10 pcs)
1 x	Floating M3 washer pad (36 pcs)
1 x	Flat washer 3.2 mm (20 pcs)
1 x	Quicklock washer 2 mm (10 pcs)
1 x	Nylon Screw M6x40
1 x	Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs)
1 x	Flat washer 4.3 mm (20 pcs)
1 x	Winter-Glove DS tx
1 x	DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch
1 x	DUPLEX 2,4EX Brackets for Transmitter DC/DS
1 x	Battery RX JETI LiIon RB 3100 7.2v
1 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x	Car Charger DC/DS-16
1 x	DUPLEX 2.4EX MFlow2 Gas 800
1 x	Servo Tester
1 x	DUPLEX 2.4EX Central Box 210
1 x	Teacher / Student Cable

7,923.87EUR