398.99EUR

DUPLEX 2.4EX Central Box 320
[JETCB320]

JETI Duplex 2.4EX Central Box 320

Product description and features
The Central Box 320 is designed for a complete management of multiple servos and two receiver batteries for a model with high security requirements. The Central Box 320 has an overload protection on each servo output, 8 channels for high-performance servos up to 60 kg / cm and 10 channels for standard servos up to 30 kg / cm. Especially for the use of powerful and power-hungry servos, the Central Box 320 has an aluminum housing for better cooling. The Central Box 320 offers true battery redundancy, DITEX servo telemetry, JETI EX telemetry and up to three receiver inputs (2x 2.4GHz and 1x 900MHz) for full power and RF signal redundancy.
Configuration via JETI Duplex DS/DC transmitters
With JETI Duplex DC/DS transmitters, the full potential of the Central Box 320 can be fully exploited. The device overview of the JETI Duplex DS/DC transmitter makes it easy to perform the entire configuration of the servo outputs, DITEX servo and JETI EX telemetry, function assignment, and more.

Compatibility with Futaba
The Central Box 320 can also be used with two S.Bus receivers (e .g Futaba R7003SB). Setting up and reading out the telemetry values must, however, be realized with a separatly available JETIBOX.
Switching on and off
The switching on and off process of the Central Box 320 is done with the supplied magnetic switch.
Recommended receivers
As receiver e. g. 2 RSat2 or REX3 receivers can be used. Optionally, the use of a REX Assist receiver in combination with a RSat2 receiver is possible, so you get a Central Box with gyro stabilization.

Features
Adjustable powerful BEC for voltage stabilization (connection of standard or HV servos)
DITEX servo telemetry support
Possibility to connect up to 3 receivers with serial communication
built-in Expander function with the possibility of independent connection of up to four JETI EX sensors
Input for magnetic switch or RC switch
Power supply batteries connected via MPX connector
100Hz mode of servo outputs (10ms period)
EX telemetry support (measurement of voltage, current, capacity, temperature, etc.)
Easy settings changes via DC/DS transmitter („Device explorer“)
Robust metal construction with mounting holes

temporarily out of stock

Reviews

Quick Find

Shopping Cart

1 x	Copier 5x20 cm pcs
2 x	Lipo RAY 2200 mAh 2s 7.4v 30C
1 x	Strip 2,5x1,25x330 mm
1 x	22 mm Cut Disc Proxxon/Dremmel
2 x	Battery LiPo GEN2700 mAh 3S 11.1v Transmitter Pack (Gens Ace)
1 x	ABS I Strip 10x5x1000 mm
2 x	LiPo Storage Box Type "BIG"
2 x	Long ball link M2 (6 uds)
2 x	Fresa corte diamante Ø 2.3mm (bola)
1 x	Short ball link M2 (6 uds)
1 x	Long ball link M1.6 (6 uds)
1 x	Battery LiPo GENS 450 mAh 2S 7.4V 25C (Gens Ace)
1 x	Support conector MPX (6 pcs)
1 x	Battery LiPo GENS 5000 mAh 12S 44.4v 45C (Gens Ace)
1 x	Fabric scissors curved (offset handles), 16 cm / 6" length
1 x	Aramid fibre shears Proton®, 21 cm / 8" length
2 x	M2,5 5Diam metal ball link V3 (2 pcs)
2 x	Battery LiPo GENS 2200 mAh 4S 14.8v 25C (Gens Ace)
2 x	Dust collector for mould cleaning
1 x	Ball Link Plier
1 x	Initior Receiver FRX2 Wireless
1 x	ABS Strip 1.0x2.0x1000 mm
1 x	M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x	Socket head ball link M3 (2 uds)
1 x	Smoke set "M"
1 x	Battery RX JETI LiIon RB 6200 7.2v
1 x	Soporte filtro FESTO (4 pcs)
1 x	Lipo SMART 5000 mAh 4s 14.8v IC5
1 x	Smoke set "S"
1 x	Tapa estado carga XT-60 (6 pcs)
1 x	Ferrita 27x14x7 mm
2 x	Battery LiPo GENS 450 mAh 3S 11.1V 25C (Gens Ace)
1 x	Battery E-Flite 150 mAh 1S 3,7V 45C for WHIPIT
1 x	Parachute expulsion foam
1 x	Short ball link M3 (6 uds)
1 x	Initior Transmitter FTX2 Wireless
1 x	Aluminium battery holder red
1 x	Round Rod 1,25x1000 mm
2 x	ABS I Strip 20x10x1000 mm
1 x	Soporte grifo FESTO vertical (1 pcs)
1 x	White smoke bombs AX-9 (10 pcs)
1 x	Red smoke canister 65 g
1 x	Round Rod 5,0x1000 mm
1 x	M3 Maxi ball link (2 uds)
1 x	Boxed KIT OF 7 Rotary Burrs FINE
1 x	Support XT60 conector (2 pcs)
2 x	M2,5 Diam metal ball link V3 (2 pcs)
1 x	Red smoke canister 140 g
1 x	Fresa corte diamante Ø 2.35mm (lentil)
1 x	Battery bed V2_M (black)
1 x	Blue metalic ball link M3/3 azul (2 pcs)
2 x	M3 Maxi ball link (2 uds)
2 x	ABS Strip 1.5x8.0x1000 mm
2 x	LiIon Battery 3000 mAh 3.3v 15A (2 pcs)
1 x	Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x	Battery LiPo GENS 5000 mAh 4S 14.8v 45C (Gens Ace)
2 x	Battery RX JETI LiIon RB 3100 7.2v
2 x	Stickers-digit for marking
1 x	Strip 1,5x1,5x330 mm
1 x	Battery LiPo GENS 4400 mAh 7S 25.9v 35C (Gens Ace)
1 x	Propeller balancer
1 x	Ferrita 14x8x5.5 mm
1 x	"M" set
1 x	Green smoke canister 100 g
1 x	Suncover 100cc Red
1 x	55% silver electrodes (2 pcs)
1 x	Pasacables rectangular 40x15 mm (4 pcs)
1 x	Battery LiPo GENS 5300 mAh 2S 7.4V 30C (Gens Ace)
1 x	Digital weight, angle and balance meter BASIC
1 x	Dean-T Plug Mold
1 x	M2,5 5Diam black ball link V2 (2 pcs)
1 x	Red smoke bombs AX-60 (5 pcs)
2 x	Joint with bearing M3 22x5,5
1 x	Cut tube
1 x	Angle support XT60 conector
1 x	Strip ABS 2.0x5.0x1000 mm
1 x	Strip 2,0x2,0x330 mm
1 x	Carbon tube (L 1000 mm, Ø18 mm, Ø15 mm)
1 x	Connector Sub-D 2+5 Male
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Blind nut M5 (4 pcs)
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Connector CAN 15
1 x	Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
1 x	XH female balance (3S) connector (2 pcs)
1 x	Oracover CARBON Metalic 1 m
1 x	105 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	Carbon fiber rod 1.0 mm x 1000 mm
1 x	Connectors banna oro 3 mm (M/F)
1 x	Pine wood slat 6.0x6.0x1000 mm
1 x	Threaded coupler ALU M3 Ø 5 (2 uds)
1 x	Battery LiPo GENS 4000 mAh 6S 22.2v 45C (Gens Ace)
1 x	6,4x1000 mm 2:1 black termoretract tube
1 x	BALSA triangular 10x10x1000 mm
1 x	Flat Connector 4.0 mm x 1000 mm
1 x	TopFuel LiPo 25C-ECO-X 1800mAh 3S
1 x	58 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm)
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	L-Connector 4.0 mm x 1000 mm
1 x	Battery LiPo GENS 5500 mAh 2S 7.6V 120C (Gens Ace Hard Case)
1 x	Beech dowels 3.0 x 1000 mm
1 x	Connectors banna oro 2 mm (M/F)
1 x	LiPo TopFuel Power-X 4000 mAh 2s 35C MTAG
1 x	Blind nut M6 (4 pcs)
1 x	Screws set for Hitec MG arms servo
2 x	HPP-21 PLUS PC Programmer for Hitec Digital Servos
1 x	Gear set HITEC HS-81
1 x	Blue aluminium double servo arm V3-Hitec 3,5inch
1 x	Servo HITEC HS-325 BB
1 x	Servo KST DS125MG servo ala 10mm 28g 7Kg
1 x	Servo KST MS825 V8.0 35kg 8.4v
1 x	Servo KST HS08A Wing Servo - 5.2Kg.cm 0.11s 11.0g 8mm
1 x	Servoholder Dymond DS 1800 MG Digital (2 pcs)
1 x	PS-050 TONEGAWA Servo
1 x	Soporte servo KST X08/H and Plus
1 x	Blue Aluminium double servo arm V3-Hitec 3-3,5inch
1 x	Servo HITEC D951 TW
1 x	Servo KST X10 V2.0 ala 10mm 28g 10.8Kg
1 x	SSPS105 Super Hi-Power servo
1 x	Servo KST X20 8.4-50 V8.0 45kg 8.4v Softstar
1 x	Soporte servo KST X10 mini / DS135MG
1 x	Gear for MICRO BB
1 x	Brazo servo aluminio KST 25T-5V2,3515,325,125,135,145X10,X12,A13
1 x	Gear for D 54
1 x	Gear for D 200 BX
1 x	Servo KST BLS915 HV V8.0 25Kg 20mm 78g
1 x	Servo Dymond D 37 Eco
1 x	Servo KST X15-1208 V8.0 13.5Kg HV
1 x	Servo KST X10-710 V8.0 7.5Kg HV
1 x	Servo KST A15-1810 20kg/cm@8.4V / Coreless Motor
1 x	Foil for sticking flaps and ailerons
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	Marker ties (20 pcs)
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	SE Ring 450 mm (2 pcs)
1 x	PPM Encoder Module
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x	SE Ring 330 mm (4 pcs)
1 x	Ring 320 mm length (5 pcs)
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	Dremel 3000 130W
1 x	Digital scale up to 40 kg
1 x	Crimping tool
1 x	M3/5Diam metal ball link V3 (2 pcs)
1 x	Short ball link M1.6 (6 uds)
1 x	Lipo GENS 2700 mAh 3s 11.1v 30C "Soaring "
1 x	Battery LiPo GENS 5000 mAh 3S 11.1v 45C (Gens Ace)
1 x	Battery LiPo TATTU 450 mAh 2S 7,4V 75C
1 x	Esc KOSMIK 160+ HV COOL
1 x	DUPLEX 2,4EX Stick with 2-Position Switch for Transmitter DC/DS
1 x	DUPLEX 2.4EX Satellite receiver Rsat 2
1 x	Motor Scorpion HKIII 4035-560 Kv
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Carbon fiber rod 1.5 mm x 2000 mm
1 x	PVC yellow transparent battery termo-retract 68 mm (1 m)
1 x	Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x	Squared carbon wing joinner 5x5x220 mm
1 x	Digital precision scale up to 2000 g
1 x	Crimping tool
1 x	Fresa corte diamante Ø 1.0mm (bola)
1 x	SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm
1 x	SLICK 360-A 104" (2640 mm)
1 x	Spare round blades, 28 mm, pack/ 2 pcs.
1 x	Propeller Pleg CAM Carbon 13x5
1 x	silverlot 45% - 1,50x500 mm solder rods (2 pcs)
1 x	Propeller diller for EME35 and DLE35
1 x	Propeller Pleg CAM Carbon 10x6
1 x	Screwdriver for Hexagon 1,5mm
1 x	Propeller Pleg CAM Carbon 12.5x9
1 x	Bird (Aero-naut)
1 x	Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs)
1 x	Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs)
1 x	Tool for entel
1 x	SE Ring 240 mm (2 pcs)
1 x	Strip 3,5x1,75x330 mm
1 x	Strip ABS 2.0x3.0x1000 mm
1 x	GM Propellers Folding propeller Scale 20x13 Carbon white 1 pair
1 x	Battery LiPo TATTU 1550 mAh 3S 11,1V 75C
1 x	Lipo GENS G-Tech 5100 mAh 6s 22.2v 80c
1 x	Battery LiPo GENS 4000 mAh 2S 7,4v RX (Gens Ace)
1 x	Battery LiPo TATTU 12000 mAh 4S 14,8V 15C
1 x	Battery LiPo TATTU 450 mAh 3S 11,1V 75C
1 x	Black smoke bombs AX-60 (5 pcs)
1 x	EVP Unit for AXI2208/xx and 2212/xx
1 x	Battery LiPo GENS 120 mAh 2S 7.4V 30C (Gens Ace) F3P Pack
1 x	ESC KOLIBRI 140 HV-I

11,730.01EUR