398.99EUR

DUPLEX 2.4EX Central Box 320
[JETCB320]

JETI Duplex 2.4EX Central Box 320

Product description and features
The Central Box 320 is designed for a complete management of multiple servos and two receiver batteries for a model with high security requirements. The Central Box 320 has an overload protection on each servo output, 8 channels for high-performance servos up to 60 kg / cm and 10 channels for standard servos up to 30 kg / cm. Especially for the use of powerful and power-hungry servos, the Central Box 320 has an aluminum housing for better cooling. The Central Box 320 offers true battery redundancy, DITEX servo telemetry, JETI EX telemetry and up to three receiver inputs (2x 2.4GHz and 1x 900MHz) for full power and RF signal redundancy.
Configuration via JETI Duplex DS/DC transmitters
With JETI Duplex DC/DS transmitters, the full potential of the Central Box 320 can be fully exploited. The device overview of the JETI Duplex DS/DC transmitter makes it easy to perform the entire configuration of the servo outputs, DITEX servo and JETI EX telemetry, function assignment, and more.

Compatibility with Futaba
The Central Box 320 can also be used with two S.Bus receivers (e .g Futaba R7003SB). Setting up and reading out the telemetry values must, however, be realized with a separatly available JETIBOX.
Switching on and off
The switching on and off process of the Central Box 320 is done with the supplied magnetic switch.
Recommended receivers
As receiver e. g. 2 RSat2 or REX3 receivers can be used. Optionally, the use of a REX Assist receiver in combination with a RSat2 receiver is possible, so you get a Central Box with gyro stabilization.

Features
Adjustable powerful BEC for voltage stabilization (connection of standard or HV servos)
DITEX servo telemetry support
Possibility to connect up to 3 receivers with serial communication
built-in Expander function with the possibility of independent connection of up to four JETI EX sensors
Input for magnetic switch or RC switch
Power supply batteries connected via MPX connector
100Hz mode of servo outputs (10ms period)
EX telemetry support (measurement of voltage, current, capacity, temperature, etc.)
Easy settings changes via DC/DS transmitter („Device explorer“)
Robust metal construction with mounting holes

temporalmente fuera de stock

Comentarios

Búsqueda Rápida

Cesta de Compras

1 x	Tubo aluminio (L 1000 mm, Ø3,0 mm, Ø2,1 mm)
1 x	Tubo ABS 7,0x6,0x1000 mm
2 x	Tubo ABS 18,0x16,0x1000 mm
2 x	Tubo carbono (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	Tubo carbono (L 1000 mm, Ø22 mm, Ø21 mm)
2 x	Tubo ABS 3,0x2,0x1000 mm
1 x	Tubo carbono (L 1000 mm, Ø2 mm, Ø1 mm)
1 x	Tubo carbono (L 1000 mm, Ø16 mm, Ø14 mm)
1 x	Tubo ABS 4,0x2,0x1000 mm
1 x	Tubo ABS 10,0x8,0x1000 mm
1 x	Tubo carbono (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	Tubo ABS 7,0x5,0x1000 mm
1 x	Tubo ABS 8,0x6,0x1000 mm
1 x	Tubo ABS 12,0x10,0x1000 mm
1 x	Tubo aluminio (L 1000 mm, Ø5,0 mm, Ø4,1 mm)
1 x	Tubo ABS 20,0x18,0x1000 mm
1 x	Tubo ABS 5,0x3,0x1000 mm
1 x	Tubo ABS 14,0x10,0x1000 mm
1 x	Tubo ABS 3,0x2,0x330 mm
1 x	Tubo ABS 16,0x14,0x1000 mm
1 x	Tubo ABS 4,0x3,0x1000 mm
1 x	Tubo ABS 9,0x8,0x1000 mm
1 x	Tubo carbono (L 1000 mm, Ø18 mm, Ø16 mm)
1 x	Tubo ABS 5,0x4,0x156 mm
1 x	Tubo ABS 6,0x5,0x1000 mm
1 x	Tubo ABS 6,0x4,0x1000 mm
1 x	EasyFLY Addon
1 x	Interface Jack Adapter IKARUS
1 x	GameCommander USB Universal
1 x	Interface Realflight Simulator
1 x	Simulador RealFlight RF-9 Interlink-X (con emisora)
1 x	Cable simulador USB multiplayer
1 x	SIMtransmitter 6 Modo 2
1 x	Perfil de ABS "L" 4,0x4,0x1000 mm
1 x	Horn aluminio anodiazado 6 mm rojo con rótula
1 x	Perfil de ABS "L" 2,0x2,0x1000 mm
1 x	Perfil de ABS "T" 8.0x8.0x1000 mm
1 x	Perfil de ABS "T" 10.0x10.0x1000 mm
1 x	Perfil de ABS "L" 6,0x6,0x1000 mm
1 x	Acople ALU M2,5 Ø 4 (2 uds)
1 x	Perfil Acero Inox. 17.8x12.4x1000 mm
3 x	Horn corto de latón M4 para cable (4 pcs)
2 x	Perfil de ABS "T" 6.0x6.0x1000 mm
1 x	Acople ALU Izda. M2,5 Ø 3 (2 uds)
1 x	Perfil de ABS de media caña 2,0x1000 mm
1 x	Conector ABS "T" 4.0 mm x 1000 mm
1 x	Canal de ABS de 1,0x2,0x1000 mm
2 x	Perfil de ABS "L" 5,0x5,0x1000 mm
2 x	Acople ALU M2,5 Ø 6 (2 uds)
1 x	Horn 20x28,5 mm (2 pcs)
1 x	Perfil Acero Inox. 19.5x9.8x1000 mm
2 x	Perfil de ABS "L" 1.5x1.5x1000 mm
2 x	Anclaje varilla mando Ø 2 mm prisionero/circlick (2 uds)
1 x	Anclaje cabina de soporte horizontal "tipo F3A" (2 pcs)
1 x	Cable acero trenzado Ø 0.88 mm - 60 kp (10 m)
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Casquillo para grimpar cable de 0,85 mm (10 pcs)
2 x	Cable acero trenzado Ø 0,5 mm (2 m)
2 x	Acoplador de aluminio para tubo de carbono 6/M4
1 x	Cierre cabina V1 M3 Azul (2 pcs)
1 x	Cierre cabina "One touch"
1 x	Cable acero trenzado Ø 0,5 mm (10 m)
1 x	Cierre cubiertas o carenados
2 x	Brazo direccional 16 mm Ø 3 mm
1 x	Abrazadera 3.2x142 (20 uds)
2 x	Brazo direccional 12 mm Ø 4 mm
1 x	Abrazadera 2.5x100 (20 uds)
1 x	Varilla acero Ø 2,5 mm x 1000 mm
2 x	Varilla acero Ø 4,5 mm x 1000 mm
2 x	Varilla acero Ø 8,0 mm x 1000 mm
2 x	Varilla acero Ø 1,2 mm x 1500 mm
2 x	Varilla acero Ø 0,5 mm x 1000 mm
2 x	Varilla acero Ø 0,8 mm x 1000 mm
1 x	Varilla acero Ø 7,0 mm x 1000 mm
1 x	Varilla acero Ø 2,0 mm x 1000 mm
2 x	Varilla acero Ø 4,0 mm x 1000 mm
1 x	Varilla latón hexagonal Ø 3 mm x 1000 mm
1 x	Varilla acero Ø 3,0 mm x 1000 mm
1 x	Varilla latón Ø 1,0 mm x 1000 mm
2 x	Varilla latón Ø 1,5 mm x 1000 mm
1 x	Varilla acero Ø 1,5 mm x 1000 mm
2 x	Varilla acero Ø 1,0 mm x 1000 mm
2 x	Varilla acero Ø 6,0 mm x 1000 mm
1 x	Varilla acero roscada M2 - 1m
1 x	Paracaídas PV6 para F3J
1 x	Mochila OPALE paramodels
1 x	Paramotor BackPack XXS (sin accesorios)
1 x	Vela OXY 0,5 pulgadas2
1 x	Vela OXY 5.0 m2
2 x	Motorización Trike XL (motor+regulador+helice)
1 x	Aramid 50 daN 50 m
1 x	Paracaídas P4
2 x	Paracaidas BACKUP X100
2 x	Paramotor BackPack XXS 2
1 x	Tubo carbono (L 1000 mm, Ø0,7 mm, Ø0,3 mm)
1 x	Cable servo PVC 0,14 mm2 JR/Graupner (5 m)
1 x	Cable servos silicona 0,50 mm2 Graupner (100 m)
1 x	CC 03
1 x	Tubo carbono (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
4 x	Varilla latón hexagonal Ø 3.5 mm x 1000 mm
1 x	Simulador RealFlight RF-9.5 S (sin emisora)
1 x	Perfil de ABS cuadrado 1 x 1000 mm
1 x	Perfil goma 10-2 mm 2M
1 x	Perfil de ABS "L" 3,0x3,0x1000 mm
1 x	Perfil de ABS triangular 4.0x1000 mm 90º
1 x	Motor OS 3820-1200 eléctrico
1 x	Perfil de ABS de media caña 8,0x1000 mm
1 x	Palas de autogiro de 330 mm
2 x	Perfil de ABS rectangular 10x5,0x1000 mm
1 x	Perfil de ABS triangular 4.0x1000 mm 60º
1 x	Perfil de ABS de media caña 6,0x1000 mm
2 x	Varilla acero Ø 1,5 mm x 1500 mm
1 x	Horn de mando 5/10 con rótula M2
1 x	Brazo direccional 16 mm Ø 4 mm
1 x	Rueda de cola para modelos de 8 a 12 kg
1 x	Conjunto de mandos arriostrados
1 x	Varilla acero Ø 14,0 mm x 1000 mm
1 x	Tren retráctil veleros 3-7 Kg 3.8-4.3 (sin rueda) 70-82 mm
1 x	Brazo direccional 16 mm Ø 4 mm ( 2 uds)
1 x	Varilla latón hexagonal Ø 5 mm x 1000 mm
1 x	Varilla acero Ø 5,5 mm x 1000 mm
1 x	Rueda de cola de 28 mm
1 x	Horn corto de latón M2 para cable (2 pcs)
1 x	Horn de mando 6/35 con rótula M3
1 x	Anclaje varilla mando Ø 1.5 mm prisionero/arandela (2 uds)
1 x	Horn F3A de Titanio 16 mm (2 uds)
1 x	Cierre de plástico para cabinas
1 x	Horn largo de latón M2 para cable (2 pcs)
1 x	Horn aluminio negro LH largo L31xH30 (2pcs)
1 x	Rueda de cola para modelos de 5 a 8 kg
1 x	Ply-Span 450x600/13g Amarillo
1 x	Oracover Blanco 10 m
1 x	MYLAR film A350 (1000x500 mm)
1 x	Oratex Antik 2m
1 x	Oratex Silver 2m
1 x	Ply-Span 450x600/13g Naranja
1 x	Oracover Naranja 2 m
1 x	Plano IKARUS
1 x	Tornillo Servos M4x5/8 aluminio anodizado negro (4 pcs)
1 x	Arandela conica alumino M3 rojo (8 pcs)
1 x	Tuerca autoempotrable M6 (4 pcs)
1 x	Arandela conica alumino M3 negro (8 pcs)
1 x	Tuerca autoempotrable M4 (4 pcs)
1 x	AC-10 pre-rotacion + motor
1 x	Tren de cola (clase 60-120)
1 x	Horn de mando variable 5 mm M2
1 x	Tren retráctil veleros hasta 3,5 Kg
1 x	Brazo direccional 12 mm Ø 3 mm ( 2 uds)
1 x	Anclaje cabina en L "tipo F3A" (2 pcs)
1 x	Horn de mando 6/20 con rótula M3
1 x	Varilla mando roscada M2,5 (2 uds)
1 x	Varilla Aluminio Ø 4,0 mm x 3000 mm
1 x	Rueda de cola para clase 20/60
1 x	Cierre cabina
1 x	Rueda de cola para clase 60/120
1 x	Horn de mando 5/15 con rótula M2
1 x	Horn corto de latón M3 para cable (2 pcs)
1 x	Horn 13,5x16 mm (2 pcs)
1 x	Horn de mando 6/27 con rótula M3
1 x	Tren retráctil veleros 8-16 Kg 2.5-3.2 (rueda 127 mm)
2 x	Manga viento Ozone L -1200 mm
1 x	Set cintas unión paracaídas 145 cm
1 x	Ballast 700gr OPALE
1 x	Para-RC Mix
1 x	Paramotor Kit Camo H1.5/ Ben Red
1 x	Piloto LUCAS ARTF
1 x	Rueda Jets 89x25 (3.50") centro aluminio
1 x	Rueda KOVO SLH 110x55 mm
1 x	Rueda KOVO SLH con rodamiento y núcleo metálico 170x54 mm
1 x	Rueda KOVO C SLH 120x60 mm
1 x	Rueda de cola 60x25 mm "tipo F3A"
1 x	KIRA 400-34
1 x	PYRO 700-45 Eje Largo
1 x	Conector ABS "H" 4.0 mm x 1000 mm
1 x	Conector ABS "CRUZ" 4.0 mm x 1000 mm
1 x	Perfil de ABS de media caña 7,0x1000 mm
1 x	Placa de montaje Ø 38 mm para motores eléctricos
1 x	Sistema salvaservos rueda delantera BIDULE 111
1 x	Rueda de cola para clase 40/90
1 x	Soporte abrazaderas 4.3 (4 uds)
1 x	Pasador M1,2x10 (10 pcs)
1 x	Motor Mega AC 16/07/12
1 x	Motor Mega AC 16/25/04
1 x	Motor Mega AC 16/25/02
1 x	Motor Mega AC 16/07/06
1 x	Motor Mega AC 16/20/02
1 x	Reductora MEGA GEAR 16 3,1:1
1 x	Abrazadera para tubo de teflón Ø29 mm ext (1 pcs)
1 x	Horn de mando largo extrafuerte con rodamiento 2,8x34
1 x	Avia (Top Model)
1 x	Aero frenos eléctricos para veleros 440 mm (2 pcs)
1 x	Adaptador USB para elementos Jeti DUPLEX
1 x	Covertor JETI DUPLEX DS

8,351.54EUR