398.99EUR

DUPLEX 2.4EX Central Box 320
[JETCB320]

JETI Duplex 2.4EX Central Box 320

Product description and features
The Central Box 320 is designed for a complete management of multiple servos and two receiver batteries for a model with high security requirements. The Central Box 320 has an overload protection on each servo output, 8 channels for high-performance servos up to 60 kg / cm and 10 channels for standard servos up to 30 kg / cm. Especially for the use of powerful and power-hungry servos, the Central Box 320 has an aluminum housing for better cooling. The Central Box 320 offers true battery redundancy, DITEX servo telemetry, JETI EX telemetry and up to three receiver inputs (2x 2.4GHz and 1x 900MHz) for full power and RF signal redundancy.
Configuration via JETI Duplex DS/DC transmitters
With JETI Duplex DC/DS transmitters, the full potential of the Central Box 320 can be fully exploited. The device overview of the JETI Duplex DS/DC transmitter makes it easy to perform the entire configuration of the servo outputs, DITEX servo and JETI EX telemetry, function assignment, and more.

Compatibility with Futaba
The Central Box 320 can also be used with two S.Bus receivers (e .g Futaba R7003SB). Setting up and reading out the telemetry values must, however, be realized with a separatly available JETIBOX.
Switching on and off
The switching on and off process of the Central Box 320 is done with the supplied magnetic switch.
Recommended receivers
As receiver e. g. 2 RSat2 or REX3 receivers can be used. Optionally, the use of a REX Assist receiver in combination with a RSat2 receiver is possible, so you get a Central Box with gyro stabilization.

Features
Adjustable powerful BEC for voltage stabilization (connection of standard or HV servos)
DITEX servo telemetry support
Possibility to connect up to 3 receivers with serial communication
built-in Expander function with the possibility of independent connection of up to four JETI EX sensors
Input for magnetic switch or RC switch
Power supply batteries connected via MPX connector
100Hz mode of servo outputs (10ms period)
EX telemetry support (measurement of voltage, current, capacity, temperature, etc.)
Easy settings changes via DC/DS transmitter („Device explorer“)
Robust metal construction with mounting holes

temporarily out of stock

Reviews

Quick Find

Shopping Cart

1 x	Propeller MEJZLIK 9,5x3 SF Carbon Indoor
1 x	Propeller MEJZLIK 20x13 Electric light (41 g)
1 x	Propeller MEJZLIK 20x10 Electric light (36 g)
2 x	PropCover 16-20" (1 pcs)
2 x	20,5x14,5 Falcon electric V2 (40 g)
2 x	Steering arm 16 mm Ø 3 mm
1 x	Screw-lock connector Ø 2 mm (2 uds)
4 x	Steering arm 12 mm Ø 4 mm (2 uds)
1 x	Cierre cabina aluminio Ø5, I=16 mm
2 x	BALSA triangular 10x10x1000 mm
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	Horizontal cockpit anchor "tipe F3A" (2 pcs)
2 x	Cap closure 33/23.5mm (2 uds)
3 x	BALSA trip 5.0x5.0x1000 mm
2 x	Pine wood slat 3.0x7.0x1000 mm
2 x	BALSA trip 6.0x6.0x1000 mm
3 x	BALSA trip 4.0x4.0x1000 mm
2 x	Locking cable tie 2.5x100 (uds)
2 x	Pine wood slat 3.0x5.0x1000 mm
2 x	20x13 Falcon electric carbon prop (64g)
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Covered closure or fairings
1 x	Liston HAYA 10 x 10 x 1000 mm
2 x	BALSA trip 2.0x10.0x1000 mm
2 x	Steering arm 12 mm Ø 4 mm
1 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x	Cierre cabina aluminio Ø4, I=10 mm
2 x	Pine wood slat 5.0x5.0x1000 mm
1 x	Cabin latch Fox MDM1 4m (pair)
2 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	Pine wood slat 6.0x6.0x1000 mm
2 x	Pine wood slat 2.0x2.0x1000 mm
1 x	Locking cable tie 3.2x142 (uds)
2 x	Beech dowels 3.0 x 1000 mm
3 x	Propeller 12x6 Falcon electric
2 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	Stainless steel cable Ø 0.62 mm (10 m)
1 x	Stainless steel cable Ø 0.5 mm (10 m)
1 x	Beech dowels 2.0 x 1000 mm
1 x	Aluminium alloy coupler for carbon tube 6/M4
3 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Canopy Lock V1 M3 Red (2 pcs)
2 x	Linden wood slat 2.0x2.0x1000 mm
3 x	Walnut wood slat 1.5x1.5x1000 mm
2 x	Canopy Latch
2 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
2 x	Beech dowels 4.0 x 1000 mm
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	Stainless steel cable Ø 0.5 mm (20 m)
3 x	BALSA triangular 15x15x1000 mm
1 x	Trailing edge BALSA 35x8x1000 mm
1 x	Liston HAYA 3 x 10 x 1000 mm
2 x	Electric spoiler 250 mm (2 pcs)
2 x	Beech dowels 10 mm x 1000 mm
1 x	Propeller balancer
2 x	Field folding model stand SebArt
1 x	Angle of incidence meter
2 x	WingFix ULTRA Black Edition
1 x	Extractor piñones 2.3/3.2 mm
2 x	Truck-trailer for gliders 720 x 285 mm
1 x	Angle measurer
1 x	PVC 0,14 qmm servos wire Graupner (100 m)
1 x	Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x	Propeller APC 10x5 Electric Pusher
1 x	Parachute P4
1 x	Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x	Xoar Electric Beechwood Prop 24x8
1 x	Screw-lock connector M2 (2 uds)
1 x	SUS wire 3m (nylon coated)
2 x	PropCover 16-20" (2 pcs)
2 x	Wheel collar 5 mm Ø (4 uds)
3 x	28x5 mm wires output (2 pcs)
2 x	Balsa panel 1.0x100x1000 mm
2 x	Linden wood slat 3.0x3.0x1000 mm
1 x	Pine wood slat 10x10x1000 mm
3 x	Balsa panel 1.5x100x1000 mm
2 x	Allen wheel collar M4x6
2 x	Birch plywood plate 600x300x4.0 mm
2 x	Birch plywood plate 600x300x2.0 mm
3 x	Steering arm 12 mm Ø 3 mm (2 uds)
2 x	quality beech plywood BIRCH 600x300x2.0 mm
1 x	Cable grommet Ø 3.2 mm (4 uds)
1 x	Control for forward wheel (MINI)
2 x	Cable grommet 9.5 mm (4 uds)
1 x	Split pin 1.6x16 mm (10 uds)
2 x	Tip wing protector 28x10x12 (2 pcs)
1 x	Crimping sleeves for cable 1.3 mm (10 pcs)
1 x	FIALA Propeller 23x8 Electric
2 x	BALSA triangular 6x6x1000 mm
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
2 x	USB Mini Camera endoscope
1 x	Propeller POWER-PROP 7x7
2 x	BALSA trip 10x10x1000 mm
1 x	Propeller MEJZLIK 22x10 Electric light (36 g)
1 x	800TVL CMOS camera for FPV
2 x	Steering arm 16 mm Ø 4 mm (2 uds)
1 x	Propeller FALCON 32,5x11 PUSHER Carbono
1 x	Motor DLE 200cc Premium Muffler
1 x	Motor DLE 200cc Std
1 x	Manometer 4 mm
2 x	Cockpit plastic closing
1 x	Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled
1 x	Surprise XII Horizontal Estabilizer (Freudenthaler)
1 x	DG-303 ACRO 3750 mm, canopy
1 x	Gracia (Top Model)
1 x	Landing gear axle Ø 4 mm (2 uds)
1 x	Medidor ángulos y/o incidencias
1 x	Propeller balancer
1 x	Birch plywood plate 600x300x2.5 mm
1 x	OBECHI sheet 2.0x3.0x1000 mm
1 x	Balsa panel 10x100x1000 mm
1 x	A/C quality beech plywood 600x300x5.0 mm
1 x	Birch plywood plate 600x300x2.0 mm
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	Balsa panel 5.0x100x1000 mm
1 x	Window mounting channel Type H 2.5x0.5 (2 m)
1 x	Wheel collar 3.5 mm Ø (4 uds)
1 x	A/C quality beech plywood 600x300x1.5 mm
1 x	Mahogany wood slat 1.5x1.5x1000 mm
1 x	A/C quality beech plywood 600x300x5.0 mm
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	Walnut wood slat 3.0x3.0x1000 mm
1 x	Lite Plywood panel 600x300x2.0 mm
1 x	A/C quality beech plywood 600x300x8.0 mm
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	Balsa panel 6.0x100x1000 mm
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	Balsa panel 2.5x100x1000 mm
1 x	Balsa panel 4.0x100x1000 mm
1 x	Plywood sheet BEECH 600 x 300 x 2,0 mm
1 x	Birch plywood plate 600x300x4.0 mm
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x	BALSA leading edge 8x10x1000 mm
1 x	A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x	Birch plywood plate 600x300x1.5 mm
1 x	Pine wood slat 3.0x10.0x1000 mm
1 x	BALSA trip 3.0x5.0x1000 mm
1 x	A/C economy plywood 600x300x6+.0 mm
1 x	Balsa panel 3.0x100x1000 mm
1 x	A/C quality beech plywood 600x300x0.6 mm
1 x	Balsa panel 8.0x100x1000 mm
1 x	21x14 Falcon electric carbon prop (64 g)
1 x	20x15 Falcon electric V2
1 x	Landing gear frontal support 29x26x13,5
1 x	41x5,5 mm wires output (2 pcs)
1 x	Wheel collar 3 mm Ø (4 uds)
2 x	Tip wing protector 30x10 (2 pcs)
1 x	Allen wheel collar M3x3
1 x	Lead with adhesive (2 pcs)
1 x	Window mounting channel 5m
1 x	Split pin 1x8 mm (10 uds)
1 x	Snap pin for micro clevis (10 uds)
1 x	STEERING FRONT WHEEL SYSTEM BIDULE 55
1 x	Wheel collar 4 mm Ø (4 uds)
1 x	Wheel collar 2 mm Ø (4 uds)
1 x	Wing bolts M3 Steel screw blue (2 pcs)
1 x	Cable grommet Ø 6.4 mm (4 uds)
1 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	Steering arm 16 mm Ø 4 mm
1 x	Wing bolts M3 Steel screw Red (2 pcs)
1 x	FOX 3000 mm ARF (FMS)
1 x	Avia spare fouselage CF reinforced (Top Model)
1 x	FOX 3000 mm, Fuselage (FMS)
1 x	ENIGMA ARF
1 x	Albatros ,spare cockpit (Top Model)
1 x	Challenger ARF (Top Model)
1 x	Aero-Master Wings (Aero-naut)
1 x	Fascination 3600 mm (Top Model)
1 x	Electric spoiler 185 mm (2 pcs)
1 x	FANTASY ARF 3.2m
1 x	Avia (Top Model)
1 x	Ion Pro NG electric with flaps GREEN Fluor (JP Model)
1 x	FANTASY ARF 3.0m, Fundas alas
1 x	Avia spare blue cockpit (Top Model)
1 x	Aero-Master Fuselage (Aero-naut)
1 x	Motor Moki S 500 cc 5 cylinders
1 x	Moki Pushrod S250 (1 pcs)
1 x	Propeller APC 10x4.5 MR
1 x	Propeller APC 10x5.5 MR Electric multirrotor
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Catalyst RESOLTECH 3357-T (0.45 Kg) Suitable for adhesive 3350/1
1 x	Receiver Crystal 35 Mc/s Ch 62
1 x	Propeller Pleg CAM-Prop 8x6
1 x	Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled
1 x	Clip fixing for wing (2 pcs)
1 x	USB Charger 12V DC for car
1 x	VIPER 1.7 Tailpipe + Fuel Tank 1500ml
1 x	PROFI TX fastening rings
1 x	Arnes cruzado Confort de Luxe PROFI
1 x	HERON RR
1 x	DUPLEX 2.4EX MUI 75
1 x	GRAFAS MAXI ARF
1 x	Y Cable
1 x	Astra wing Joinner (Top Model)
1 x	Propeller APC 11x7 Electric
1 x	Propeller APC 10x5.5 MR Electric multirrotor PUSHER
1 x	ASK 21 6.8m
1 x	Propeller APC 11x5 Glow/Gas
1 x	Propeller APC 11x7 SF
1 x	Gobe R-26S (Airwold)
1 x	Epoxy 40 min (Resin). 25Kg
1 x	Epoxy Resin L + Hardener LT kit/ 3125g
1 x	Epoxy Resin L + Hardener GL2, kit/ 930 g
1 x	Epoxy Resin L + Hardener GL 1 (30 min)
1 x	Adhesive epoxy structures RESOLTECH 3350 (1 kg)
1 x	Interruptor SAFET-SWITCH 12HV Twinbatt
1 x	Brass wire 0.5 mm (25 m)
1 x	Program Card G2 RAY
1 x	Spinner 42 mm EXTRA 330SC
1 x	Adaptador equilibrador HITEC (XH)
1 x	DUPLEX 2.4EX Central Box 210

23,951.63EUR