258.00EUR

DUPLEX 2.4EX Central Box 210
[JETCB210]

JETI Duplex 2.4EX Central Box 210
Product description and features
The Central Box 210 is the successor to the popular Central Box 200. Especially for the use of powerful and power-hungry servos, the Central Box 210 uses an aluminum housing and avoids the over current protection of the servo slots. The Central Box 210 offers true battery redundancy, DITEX servo telemetry, JETI EX telemetry and up to three receiver inputs (2x 2.4GHz and 1x 900MHz) for full power and RF signal redundancy.
Configuration via JETI Duplex DS/DC transmitters
With JETI Duplex DC/DS transmitters, the full potential of the Central Box 210 can be fully exploited. The device overview of the JETI Duplex DS/DC transmitter makes it easy to perform the entire configuration of the servo outputs, DITEX servo and JETI EX telemetry, function assignment, and more.
Compatibility with Futaba
The Central Box 210 can also be used with two S.Bus receivers (e .g Futaba R7003SB). Setting up and reading out the telemetry values must, however, be realized with a separatly available JETIBOX.
Switching on and off The switching on and off process of the Central Box 210 is done with the supplied magnetic switch.
Recommended receivers
As receiver e. g. 2 RSat2 or REX3 receivers can be used. Optionally, the use of a REX Assist receiver in combination with a RSat2 receiver is possible, so you get a Central Box with gyro stabilization.
Features
Configurable servo outputs
Battery connections 2x MPX connector system
Robust aluminum housing for extra cooling and protection
Firmware upgradeable via JETI USB adapter and JETI Studio
Wireless programming via the device overview of the DC/DS transmitters
Up to 3 independent receiver inputs (R1, R2, E1/R3)
Up to 15 servo slots (suitable for DITEX servo telemetry)
Up to 3 telemetry sensor inputs (E1/R3, E2/15, E3/14)
Input for supplied magnetic switch or optional RC switch
Optional over current protection
The Central Box 210 is not equipped with the built-in overload protection of the servo slots. To protect critical servos such tow coupling servos, retractable landing gears or spoiler servos, the optional overload protection DPSI OCP (Accessories tab) can be used.
Feature
Servo outputs 15
Protected servo outputs (for servos with up to 30kg/cm)
Protected servo outputs (for servos with up to 30kg/cm)
Receiver inputs up to 3
Satellite receiver support Yes
Telemetry Yes
DITEX servo telemetry Yes
Battery inputs 2
Supply voltage [V] 4 up to 8.4
Voltage regulator No
Permanent current [A] 20
Peak current (approx. 2 seconds) [A] 90
Idle current [µA] 180
Operating temperature [°C] ([°F]) -20 to 75 (-4 to 167)
Dimensions [mm] ([in]) 66 x 42 x 18 (2.6 x 1.65 x 0.71)
Weight [g] ([oz]) 59 (2.08)

under request

Reviews

Quick Find

Shopping Cart

1 x	Jeti Black cap
1 x	ABS tube 5.0x3.0x1000 mm
2 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	ABS tube 20.0x18.0x1000 mm
3 x	ABS tube 6.0x4.0x1000 mm
1 x	Cap closure 33/23.5mm (2 uds)
1 x	Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x	ABS tube 10.0x8.0x1000 mm
2 x	Cockpit plastic closing
1 x	Covered closure or fairings
1 x	CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x	Steering arm 16 mm Ø 3 mm
2 x	Bungee HLG Premium
1 x	6 mm hexagonal ball link M3 (10 pcs)
3 x	Ball link M2 (10 pcs)
2 x	Socket head long ball link M3 (6 uds)
2 x	M3 INDUSTRIAL ball link (2 uds)
1 x	M3 Maxi ball link (2 uds)
2 x	M2/M1/6 3Diam short black ball link V1 (6 pcs)
1 x	Short ball link M2 (6 uds)
1 x	Socket head long ball link M3 (2 uds)
2 x	Ball link M3 (10 pcs)
4 x	M2,5 Diam metal short ball link V3 (2 pcs)
2 x	Ball link M2,5 (10 pcs)
2 x	Ball link M3 (10 pcs, flat ball)
1 x	M2,5 Diam metal ball link V3 (2 pcs)
1 x	M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x	Joint with bearing M3 22x5,5
1 x	Short ball link M1.6 (6 uds)
1 x	M2/M1/6 3Diam short black ball link V1 (2 pcs)
1 x	M2 5Diam black ball link V2 (2 pcs)
2 x	Socket head ball link M3 (2 uds)
1 x	Long ball link M1.6 (6 uds)
2 x	Blue metalic ball link M3/3 azul (2 pcs)
2 x	Joint with bearing M2,5 22x5,5
1 x	WingFix ULTRA Black Edition
1 x	Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x	White silicone 0,25 qmm wire (150 m)
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x	M3 Maxi ball link (2 uds)
1 x	Ball link M3 RPA's-UAV's
1 x	Wing bolts M3 Steel screw Red (2 pcs)
1 x	ABS tube 14.0x10.0x1000 mm
1 x	ABS tube 7.0x5.0x1000 mm
2 x	ABS tube 8.0x7.0x1000 mm
1 x	Allen wheel collar M4x6
1 x	ABS tube 2.0x1.0x1000 mm
1 x	Snap short M2 (10 uds)
1 x	Split pin 1x8 mm (10 uds)
1 x	Snap pin for micro clevis (10 uds)
1 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x	Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm)
1 x	Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x	Cable grommet Ø 5 mm (4 uds)
1 x	250 mm / 16 mm Airbrakes
1 x	ABS tube 5.0x4.0x156 mm
2 x	Cable grommet Ø 3.2 mm (4 uds)
1 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	Press fitting for 0,5 diam. steel cable (10 pcs)
3 x	ABS tube 7.0x6.0x1000 mm
1 x	Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
1 x	Tip wing protector 40x14 (2 pcs)
1 x	Split M1,2x10 (10 pcs)
2 x	ABS tube 12.0x10.0x1000 mm
1 x	Lead with adhesive (2 pcs)
1 x	Window mounting channel 5m
2 x	Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x	140 mm rods + T patellas set for direction control
1 x	Snap for floding prop for 2 mm axi
1 x	CF tube set (Ø 38 mm y Ø 14 mm)
1 x	Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm)
1 x	Ferrita con funda
1 x	Truck-trailer for gliders 720 x 239 mm
1 x	Angle measurer
1 x	Field folding model stand SebArt
1 x	Propeller balancer
1 x	Long ball link M3 (6 uds)
3 x	Short ball link M3 (6 uds)
1 x	Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	Fiberglass tube 6/4x1000mm
1 x	6 mm ball link M3 (10 pcs)
2 x	Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm)
1 x	ABS tube 3.0x2.0x1000 mm
1 x	Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm)
1 x	Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	Vasa model Catapult
1 x	Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm)
1 x	Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm)
1 x	M2/M1/6 3Diam long black ball link V1 (2 pcs)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm)
1 x	Joint with bearing M2 22x5,5
1 x	Ferrita 27x14x7 mm
1 x	eFuel 30A Power Supply
1 x	Field folding model stand
1 x	Truck-trailer for gliders 720 x 285 mm
1 x	ABS Strip 1.5x2.0x1000 mm
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m
1 x	Horns indoor
1 x	Long extra-strong control horn with bearing 2,8x34
1 x	Long adjustable control horn 3x34
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm
1 x	Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x	Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm)
1 x	M2,5 5Diam metal ball link V3 (2 pcs)
2 x	Long ball link M2 (6 uds)
1 x	ABS tube 5.0x4.0x1000 mm
1 x	ABS tube 18.0x16.0x1000 mm
1 x	ABS tube 16.0x14.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm)
1 x	Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm)
1 x	Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m)
1 x	Suncover 100cc Red
1 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	Blue metalic ball link M2/2 azul (2 pcs)
1 x	Blades 330mm
1 x	Rocket cardboard tube 50mm x 48mm x 250mm
1 x	DSM 10 Dual Switch Mixer
1 x	DUPLEX 2,4GHz MRPM EX
1 x	resin-hardener package L-385 with hardener H-385 (3.5 Kg)
1 x	Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm)
1 x	Motor brushless 1806 - 2300 Kv Cuadracopter
1 x	100 mm rods + T patellas set for direction control
1 x	Program Card KAVAN ES
1 x	STEERING FRONT WHEEL SYSTEM BIDULE 111
1 x	Extra-long adjustable aluminium control horn 2,8x34
1 x	Brass control horn M2 short for wire (2 pcs)
1 x	6 mm M3 variable horn
1 x	Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm)
1 x	Jodel D.9 BeBe 2.400 mm Kit
1 x
1 x	Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg
1 x	Carbon fiber rod 1.5 mm x 2000 mm
1 x	VIPER JET 2.2m + Electric landig Gear Deco: 01 Red-Blac-kWhit
1 x	DUPLEX 2,4EX Brackets for Transmitter DC/DS
1 x	Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm
1 x	Battery RX JETI LiIon RB 5200 7.2v
1 x	Mould Resin P 10 kg
1 x	ABS tube 9.0x8.0x1000 mm
1 x	Electric Landing Gear ULTIMATUM 2.0 (Elektron Retracts)
1 x	DUPLEX 2.4EX MULi 6s M
1 x	Electric Landing Gear ODYSSEY (Elektron Retracts)
1 x	DUPLEX 2.4 EX MVario2
1 x	Epoxy Resin L + Hardener CL (60 min) kit/ 930 g
1 x	Glass Bubbles (0.12g) 400 G (aproxx 3.3 l)
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	DUPLEX 2.4EX MUI 75
1 x	Carbon fiber rod 3.0 mm x 1000 mm

8,825.92EUR