398.99EUR

DUPLEX 2.4EX Central Box 320
[JETCB320]

JETI Duplex 2.4EX Central Box 320

Product description and features
The Central Box 320 is designed for a complete management of multiple servos and two receiver batteries for a model with high security requirements. The Central Box 320 has an overload protection on each servo output, 8 channels for high-performance servos up to 60 kg / cm and 10 channels for standard servos up to 30 kg / cm. Especially for the use of powerful and power-hungry servos, the Central Box 320 has an aluminum housing for better cooling. The Central Box 320 offers true battery redundancy, DITEX servo telemetry, JETI EX telemetry and up to three receiver inputs (2x 2.4GHz and 1x 900MHz) for full power and RF signal redundancy.
Configuration via JETI Duplex DS/DC transmitters
With JETI Duplex DC/DS transmitters, the full potential of the Central Box 320 can be fully exploited. The device overview of the JETI Duplex DS/DC transmitter makes it easy to perform the entire configuration of the servo outputs, DITEX servo and JETI EX telemetry, function assignment, and more.

Compatibility with Futaba
The Central Box 320 can also be used with two S.Bus receivers (e .g Futaba R7003SB). Setting up and reading out the telemetry values must, however, be realized with a separatly available JETIBOX.
Switching on and off
The switching on and off process of the Central Box 320 is done with the supplied magnetic switch.
Recommended receivers
As receiver e. g. 2 RSat2 or REX3 receivers can be used. Optionally, the use of a REX Assist receiver in combination with a RSat2 receiver is possible, so you get a Central Box with gyro stabilization.

Features
Adjustable powerful BEC for voltage stabilization (connection of standard or HV servos)
DITEX servo telemetry support
Possibility to connect up to 3 receivers with serial communication
built-in Expander function with the possibility of independent connection of up to four JETI EX sensors
Input for magnetic switch or RC switch
Power supply batteries connected via MPX connector
100Hz mode of servo outputs (10ms period)
EX telemetry support (measurement of voltage, current, capacity, temperature, etc.)
Easy settings changes via DC/DS transmitter („Device explorer“)
Robust metal construction with mounting holes

temporarily out of stock

Reviews

Quick Find

Shopping Cart

2 x	Extractor piñones 2.3/3.2 mm
2 x	Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
2 x	ABS tube 3.0x2.0x330 mm
3 x	ABS tube 9.0x8.0x1000 mm
2 x	ABS tube 12.0x10.0x1000 mm
3 x	ABS tube 18.0x16.0x1000 mm
1 x	ABS tube 7.0x5.0x1000 mm
1 x	Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
1 x	ABS tube 8.0x7.0x1000 mm
1 x	ABS tube 7.0x6.0x1000 mm
3 x	CF tube set (Ø 38 mm y Ø 14 mm)
2 x	Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x	Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
1 x	ABS tube 9.0x7.0x1000 mm
1 x	ABS tube 5.0x3.0x1000 mm
1 x	Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
2 x	ABS tube 20.0x18.0x1000 mm
3 x	ABS tube 2.0x1.0x1000 mm
2 x	ABS tube 5.0x4.0x1000 mm
2 x	Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x	Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x	ABS tube 14.0x10.0x1000 mm
2 x	ABS tube 16.0x14.0x1000 mm
1 x	Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
2 x	ABS tube 8.0x6.0x1000 mm
2 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
2 x	ABS tube 10.0x8.0x1000 mm
1 x	Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
2 x	Adjustable launching hook
1 x	Towing hook
2 x	Towing hook <3m
1 x	SERVO HOLDER
3 x	Towing hook
1 x	LOWER TOW HOOK
1 x	Fixed launching hook
3 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	5 LiPo XH>EH adapter
2 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	Glases Flitemaster
1 x	USB HLS prog. interface
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	Glases Innovation Plus
1 x	Futaba External voltage input cable Futaba CA-RVIN-700
1 x	Glases Moritz
1 x	Glases Stratus
2 x	Adapter lead MPX/EC3
1 x	Propeller POWER-PROP 13x9
1 x	Propeller POWER-PROP 14x9
1 x	FALCON 20X9 CARBON PROPELLER (GAS)
1 x	LASER 73" 1.85m (05) PILOT
1 x	Propeller balancer
1 x	Angle measurer
1 x	Surface Indicator Gauge Small
1 x	Medidor ángulos y/o incidencias
1 x	Simulador RealFlight RF-9.5 S (sin emisora)
1 x	Propeller balancer
1 x	SIMtransmitter 6 Mode 2
1 x	Slave-cable USB Easy Sim
1 x	Interface Jack Adapter IKARUS
1 x	Interface Realflight Simulator
1 x	EasyFLY Addon
1 x	Field folding model stand SebArt
1 x	Angle of incidence meter
1 x	Field folding model stand
1 x	Truck-trailer for gliders 720 x 285 mm
1 x	Long pinned hinge (12 uds)
1 x	Conector XT-30 (macho)
1 x	6 mm aluminium horn with patella
1 x	5 mm M2 variable inclined horn
2 x	Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm)
1 x	Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m)
1 x	Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
2 x	Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm)
2 x	Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x	Flybar support metal LAMA
1 x	Charger LiPo Charger4
1 x	Coversion set HIROBO EX/EAGLE elektro
1 x	TP/TopFuel - JST-EH 4/5S Adapter
1 x	AC-10 pre-rotacion with motor
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	Circlick securite
1 x	TP/TopFuel - XH 2/3S Adapter
1 x	ABS tube 4.0x3.0x1000 mm
1 x	Receptor CORE PBR-26XS 26ch
1 x	Strip ABS 2.0x8.0x1000 mm
1 x	Strip 3,5x1,75x330 mm
1 x	PPM Encoder Module
1 x	SE Ring 450 mm (2 pcs)
1 x	Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x	SE Ring 350 mm (2 pcs)
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	SE Ring 480 mm (2 pcs)
1 x	Motor SAITO FG-61 TS
1 x	Wing Joiner ULTIMATUM 2.0 m
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x	Aluminum Bayonet / strongal D35 mm / 1 m
1 x	Waterproof adhesive tape, width 19mm, length 25m
2 x	WingFix ULTRA Black Edition
1 x	Ventus 1:4 set of instruments
1 x	Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm)
2 x	Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm)
1 x	Carbon tube 3K-Matt (L 1000 mm, Ø25 mm, Ø23 mm)
1 x	Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm)
1 x	Round Rod 1,5x1000 mm
1 x	Carbon fiber rod 20 mmx1000 mm
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
2 x	CF tube (L 1000 mm Ø030 mm, Ø26 mm)
1 x	Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø26 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm)
1 x	Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø40 mm, Ø36 mm)
1 x	Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø28 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø18 mm, Ø16 mm)
1 x	Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	ABS tube 4.0x2.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm)
1 x	ABS tube 6.0x5.0x1000 mm
1 x	Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm)
1 x	Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm)
1 x	Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	ABS tube 3.0x2.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm)
1 x	ABS tube 6.0x4.0x1000 mm
1 x	Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm)
1 x	Carbon tube (L 2000 mm, Ø12 mm, Ø10 mm)
2 x	CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x	Carbon tube (L 1000 mm, Ø7 mm, Ø5 mm)
1 x	CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm)
1 x	Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm)
1 x	Mig-29 "FULCRUM" (RBC Kits)
1 x	AXI 2820/8 V2
1 x	Motor A40-10S V4 14-Pole
1 x	Axle for motor A50-L
1 x	Motor A40-10 L V2 14-Pole Glider
1 x	Motor Mega AC 16/25/04
1 x	ABS 500 x 400 x 1,5 mm (white)
1 x	ABS 500 x 400 x 1 mm (white)
1 x	Shaft for A60-XS-V2 (112,5mm)
1 x	AXI 2814/16 V2 Long
1 x	AXI 2212/20 V2
1 x	Axi for motor A40-L Motor 8-Pole-Electric Turbine
1 x	AXI 2217/20 V2
1 x	AXI 2826/8 V2
1 x	AXI 2820/14 V2 Long
1 x	AXI 2820/14 V2
1 x	Motor A30-14 M V2 6 Poles
1 x	AXI 2808/16 V2 Long
1 x	AXI 2820/10 V2
1 x	Motor A20-26 M EVO
1 x	Motor A20-20 L EVO
1 x	Motor Mega AC CAR 10 PRO
1 x	Swashplate metal LAMA
1 x	Carbon blade 3D 230 mm
1 x	Motor Mega AC 22/45/02 E
1 x	Motor Mega AC 22/30/03
1 x	Motor Mega AC 16/25/06
1 x	Motor Mega AC 16/15/03
1 x	DUPLEX 2.4EX RC Power Switch 10
1 x	SE Ring 240 mm (2 pcs)
1 x	SE Ring 200 mm (2 pcs)
1 x	Spikes Band (5 m)
1 x	Oracover light Grey 2m
1 x	SyRen 50A 6V-30V Regenerative Motor Driver
1 x	DSM 10 Dual Switch Mixer

8,392.39EUR