74.90EUR

DSM 10 Dual Switch Mixer
[JETIDSM10]

JETI DSM 10 Dual Switch Mixer.

DSM 10 is an electronic switch for switching of two receiver batteries which are connected to one receiver. The product also includes a receiver current supply switch. Batteries that are connected to the inputs of the DSM 10 are permanently measured and connected with the aid of a hysteresis comparator either both to the output, or one of both batteries with the higher voltage only.
The DSM 10 exit consists of a MPX connector which can be used for direct connection of the exit to the receiver. The MPX connector is a fixed part of Duplex receivers with the label EPC (External Power Connector), receivers R14 and R18.
The DSM 10 is not equipped with a voltage stabilizing circuit for the connected batteries. The voltage at the DSM 10 output will always be equal to the voltage of the connected battery with the higher voltage. Make sure that receiver, servos and other equippment supplied by the DSM 10 are designed for the given voltage.
The DSM 10 is controlled by a magnetic switch which can be placed outside of the model airplane fuselage. By touching with a special magnet, the system becomes switched on or off. The electronic switch in switched on state is characterized by a minimum transitional resistance.

Weight [g] 24
Dimensions [mm] 38 x 20 x 7
Sustained current [A] 10
Operational temperature [°C] -20 ... 85
Recommended input voltage [V] 5 ... 8,4
Idle current [µA] 130
Number of battery inputs 2
Input voltage max. [V] 13
Peak current (max 5s) [A] 20

under request

Reviews

Quick Find

Shopping Cart

2 x
3 x	2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x	Flap hinge (6 pcs)
1 x	Nylon hinge 15x0,3 (10 pcs)
2 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	Miniature brass strap hinge, 1 m
1 x	Long pinned hinge (6 uds)
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
2 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Pin type hinge Al 6x98 mm (2 pcs)
1 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Gates hinge
1 x	Small pinned hinge (12 uds)
1 x	15 mm reinforced hinge
1 x	Ferrita 14x8x5.5 mm
1 x	Ferrita 17x10x6.5 mm
1 x	Ferrita 27x14x7 mm
1 x	Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x	Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
1 x	ABS tube 9.0x7.0x1000 mm
2 x	ABS tube 20.0x18.0x1000 mm
1 x	Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
1 x	Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x	ABS tube 8.0x7.0x1000 mm
1 x	ABS tube 3.0x2.0x1000 mm
1 x	Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x	Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x	ABS tube 3.0x1.0x1000 mm
2 x	ABS tube 10.0x8.0x1000 mm
1 x	CF tube set (Ø 38 mm y Ø 14 mm)
1 x	ABS tube 7.0x5.0x1000 mm
2 x	ABS tube 16.0x14.0x1000 mm
1 x	ABS tube 4.0x2.0x1000 mm
1 x	ABS tube 6.0x5.0x1000 mm
1 x	Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x	ABS tube 9.0x8.0x1000 mm
1 x	ABS tube 4.0x3.0x1000 mm
1 x	ABS tube 18.0x16.0x1000 mm
1 x	ABS tube 5.0x4.0x156 mm
1 x	ABS tube 5.0x4.0x1000 mm
2 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	Socket head long ball link M3 (2 uds)
1 x	M2/M1/6 3Diam long black ball link V1 (6 pcs)
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Protective Cover for wires Ø 10 mm 1000 mm
1 x	Clip fixing for wing (2 pcs)
2 x	Hovercraft sailcloth
1 x	METEOR 1.000 mm kit
1 x	Soporte grifo FESTO vertical (1 pcs)
1 x	Servo NARO Max Std
1 x	18 mm reinforced hinge
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	LA500 rotor head core
1 x	22 mm Cut Disc Proxxon/Dremmel
1 x	Digital precision scale up to 2000 g
1 x	3,0x60 mm allen screwdriver
1 x	Fresa corte diamante Ø 1.4mm (bola)
1 x	Dremel 3000 130W
1 x	DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301)
1 x	1,5x50 mm allen screwdriver
1 x	Concave-Convex sandpaper file 13 mm
1 x	100g Flux Paste for Silver Solder
1 x	2,5x60 mm allen screwdriver
1 x	Copier 2x20 cm pcs
1 x	Fresa corte diamante Ø 2.3mm (bola)
1 x	Black silicone 0,25 mm² wire (25 m)
1 x	White silicone 0,25 mm² wire (25 m)
1 x	DRIVE 550 (KIRA 500-26 6,7:1 + KOBY 55 LV)
1 x	KIRA 480-38 5,2:1
1 x	Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm)
1 x	ABS tube 3.0x2.0x330 mm
1 x	Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm)
1 x	Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	Fiberglass tube 6/4x1000mm
1 x	Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm)
1 x	Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x	Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm)
1 x	Rocket D3-P
1 x	Rocket cardboard tube 50mm x 48mm x 250mm
1 x	Shirt Hispano Aviación
1 x	Vest clothes Hispano Aviación
1 x	Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b
1 x	Retract undercarriage
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	Pilot LA 500
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Piñon motor rotor LA-500
1 x	LA500 pilot-seat set
1 x	LA500 rotor head shaft
1 x	MOTOR MOUNT RODS AXI 53XX AND AXI 81XX 60MM (4PCS)
1 x	AXI Cooler 22xx
1 x	Screwdriver for Hexagon 1,5mm
1 x	Sealing Iron Sleeve PROF
1 x	KIRA 480-26 5,2:1
1 x	KIRA 600-38 6,7:1
1 x	Battery EMCOTEC LiIon 3000 7.2v
1 x	DPSI LR-S (with push buttons)
1 x	KIRA 500-36 6,7:1
1 x	Combo lighting module with covering drop shape
1 x	DPSI Micro MPS
1 x	Fuel Dot (Silver)
1 x	PYRO 600-11
1 x	290 mm 290 mm M5x18 mm shaft ship
1 x	ABS angle 4,0x4,0x1000 mm
1 x	ABS Strip 1.0x2.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm)
1 x	Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø26 mm)
1 x	DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch
1 x	Carbon tube 3K-PW (L 1000 mm, Ø40 mm, Ø36 mm)

4,369.88EUR