398.99EUR

DUPLEX 2.4EX Central Box 320
[JETCB320]

JETI Duplex 2.4EX Central Box 320

Product description and features
The Central Box 320 is designed for a complete management of multiple servos and two receiver batteries for a model with high security requirements. The Central Box 320 has an overload protection on each servo output, 8 channels for high-performance servos up to 60 kg / cm and 10 channels for standard servos up to 30 kg / cm. Especially for the use of powerful and power-hungry servos, the Central Box 320 has an aluminum housing for better cooling. The Central Box 320 offers true battery redundancy, DITEX servo telemetry, JETI EX telemetry and up to three receiver inputs (2x 2.4GHz and 1x 900MHz) for full power and RF signal redundancy.
Configuration via JETI Duplex DS/DC transmitters
With JETI Duplex DC/DS transmitters, the full potential of the Central Box 320 can be fully exploited. The device overview of the JETI Duplex DS/DC transmitter makes it easy to perform the entire configuration of the servo outputs, DITEX servo and JETI EX telemetry, function assignment, and more.

Compatibility with Futaba
The Central Box 320 can also be used with two S.Bus receivers (e .g Futaba R7003SB). Setting up and reading out the telemetry values must, however, be realized with a separatly available JETIBOX.
Switching on and off
The switching on and off process of the Central Box 320 is done with the supplied magnetic switch.
Recommended receivers
As receiver e. g. 2 RSat2 or REX3 receivers can be used. Optionally, the use of a REX Assist receiver in combination with a RSat2 receiver is possible, so you get a Central Box with gyro stabilization.

Features
Adjustable powerful BEC for voltage stabilization (connection of standard or HV servos)
DITEX servo telemetry support
Possibility to connect up to 3 receivers with serial communication
built-in Expander function with the possibility of independent connection of up to four JETI EX sensors
Input for magnetic switch or RC switch
Power supply batteries connected via MPX connector
100Hz mode of servo outputs (10ms period)
EX telemetry support (measurement of voltage, current, capacity, temperature, etc.)
Easy settings changes via DC/DS transmitter („Device explorer“)
Robust metal construction with mounting holes

temporalmente fuera de stock

Comentarios

Búsqueda Rápida

Cesta de Compras

2 x	Conector ABS "L" 4.0 mm x 1000 mm
2 x	Perfil de ABS "T" 10.0x10.0x1000 mm
1 x	Conector ABS "L" 1.5 mm x 1000 mm
2 x	Perfil de ABS cuadrado 4 x 1000 mm
1 x	Perfil de ABS "L" 2,0x2,0x1000 mm
1 x	Perfil de ABS de media caña 2,0x1000 mm
1 x	Perfil de ABS "L" 5,0x5,0x1000 mm
1 x	Perfil goma 8-2 mm 2M
1 x	Perfil de ABS cuadrado 3 x 1000 mm
1 x	Perfil de ABS triangular 4.0x1000 mm 90º
1 x	Perfil de ABS "L" 10,0x10,0x1000 mm
1 x	Perfil de ABS de media caña 2,5x1000 mm
2 x	Perfil de ABS triangular 2.0x1000 mm 90º
1 x	Perfil de ABS de media caña 3x1000 mm
2 x	Conector ABS "H" 4.0 mm x 1000 mm
1 x	Perfil Acero Inox. 10.5x5.7x1000 mm
1 x	Perfil de ABS rectangular 12x6,0x1000 mm
2 x	Conector ABS "L" 1.0 mm x 1000 mm
1 x	Perfil de ABS "T" 6.0x6.0x1000 mm
1 x	Perfil de ABS "L" 6,0x6,0x1000 mm
1 x	Perfil de ABS "L" 1.5x1.5x1000 mm
1 x	Perfil goma 6-2 mm 2M
2 x	Perfil de ABS "L" 4,0x4,0x1000 mm
1 x	Perfil de ABS cuadrado 2 x 1000 mm
1 x	Perfil de ABS de media caña 4x1000 mm
1 x	Perfil de ABS "T" 8.0x8.0x1000 mm
1 x	Perfil de ABS de media caña 6,0x1000 mm
1 x	Perfil de ABS "T" 2.0x2.0x1000 mm
2 x	Rótula corta M2 con bola/tornillo (6 uds)
2 x	Rótula V2 M2 5Diam negra (2 pcs)
2 x	Rótula MAXI con bola/tornillo M3 (2 uds)
1 x	Rótula M3
1 x	Rótula larga M1.6 con bola/base (6 uds)
1 x	Rótula MAXI con bola/saliente M3 (2 uds)
1 x	Rótula V2 corta M2,5 5Diam negra (2 pcs)
1 x	Rótula V1 larga M2/M1,6 3Diam negra (6 pcs)
2 x	Rótula V1 larga M2/M1,6 3Diam negra (2 pcs)
1 x	Rótula larga M3 con bola/tornillo (6 uds)
1 x	Rótula larga M3 con bola/base, tornillo y tuerca (6 uds)
2 x	Rótula MAXI sin bola M3 (2 uds)
1 x	Rótula larga M3 con bola/base, tornillo y tuerca (2 uds)
2 x	Rótula V3 aluminio M2,5 5Diam (2 pcs)
1 x	Rótula V2 corta M2 5Diam negra (2 pcs)
1 x	Rótula corta M1.6 con bola/base (6 uds)
1 x	Servo GO-1035MG 16 kg.cm 0.08s/60º
2 x	Crimpadora
1 x	EXTRA NG 74" white/red/blue (Skywing RC)
1 x	Bisagra cilíndrica 4,5 Ø x 12 x 76 mm (10 pcs)
1 x	Bisagra cilíndrica 3,0 Ø x 10 x 48 mm (10 pcs)
1 x	Bisagra de aluminio tipo PIN 4,5x70 mm desmontable (2 pcs)
1 x	Bisagra cilíndrica 2,5 Ø x 10 x 43 mm (10 pcs)
1 x	Bisagra cilíndrica 67 mm Ø 5 mm (4 pcs)
1 x	Bisagra cilíndrica 2,5 Ø x 8 x 33 mm (10 pcs)
2 x	Bisagra papel lite CA (12 uds)
2 x	Bisagra de nylon 20x15x0,3 (10 pcs)
1 x	Bisagra cilíndrica 48 mm Ø 2,5 mm (5 pcs)
1 x	Bisagra papel CA (12 uds)
2 x	Bisagra de aluminio tipo PIN 3,0x50 mm (2 pcs)
1 x	Bisagra cilíndrica 67 mm Ø 4,5 mm (5 pcs)
1 x	Bisagra de aluminio desmontada 6x98 mm (2 pcs)
1 x	Cartuchos de humo AX-18 blanco (5 pcs)
1 x	Destornillador allen 2,5x60 mm molibdeno
1 x	Gancho de remolcador
1 x	Conector equilibrado XH (5S) macho (2 pcs)
1 x	Conector DEANS 4 pines (1 par)
1 x	Cable carga bateria transmisor Graupner 2x0,5 qmm (50 cm)
1 x	Brazo direccional 16 mm Ø 4 mm ( 2 uds)
1 x	Extractor piñones 2.3/3.2 mm
1 x	Perfil de ABS cuadrado 1 x 1000 mm
1 x	Adaptador de hélice 5 mm M6
1 x	Adaptador de hélice 10 mm M12
1 x	Adaptador de hélice 3 mm M6
1 x	Adaptador de hélice 5 mm CN-Spinner
1 x	Adaptador de hélice 4 mm M8
1 x	Plancha carbono 350x150x1.0 mm
1 x	Led (blanco - 2 pcs)
1 x	Tapa de servo mini 65 mm
1 x	Bancada servo ala 13 mm
1 x	SERVO DES 588 BB MG
1 x	Servo TOPMODEL S7520 MG
1 x	Servo KST X10-710 V8.0 7.5Kg HV
1 x	Servo SAVOX SW-1250 MG digi
1 x	Servo SAVOX SC-1267 SG
1 x	Led (verde - 2 pcs)
1 x	Servo SAVOX SB-2270 SG Highvoltage brushless
1 x	Led Flash (rojo - 2 pcs)
2 x	Led Flash (naranja - 2 pcs)
1 x	SERVO DES 657/675 Piñones
1 x	Tapa de servo micro-mini 57 mm
1 x	Sistema de luces de alta potencia
1 x	SERVO DES 707 BB MG, Piñones
1 x	Servo SAVOX SH 1290 MG digi
1 x	SERVO DES 658 BB MG
1 x	Soporte metal para servos
1 x	Rótula con bola M2,5 (10 pcs)
2 x	Rótula V3 aluminio M3/5 Diam con base corta (2 pcs)
1 x	Rótula con bola M2 (10 pcs)
1 x	Luz tren delantero 18 mm
1 x	Piñones servo D 54
1 x	Piñones servo D 200 BX
1 x	Luces Power MULTIlight
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Sandwich carbon + poplar 3mm + carbon 290x160 mm
1 x	DUPLEX 2.4EX Central Box 210
1 x	Tubo carbono 3K-PW (Ø25 mm, Ø21 mm L:1000 mm)
1 x	Sandwich carbon + poplar 4mm + carbon 290x160 mm
1 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	Motor KAVAN PRO 2225-1600
1 x	Tubo de latón (L 1000 mm, Ø13,0 mm, Ø12,0 mm)
1 x	Tubo de latón (L 1000 mm, Ø4,0 mm, Ø3,1 mm)
1 x	Tubo carbono/kevlar 3K-PW (Ø25 mm, Ø22.5 mm L:1500 mm)
1 x	Bisagra de compuerta negra 30x16 mm (2 pcs)
1 x	Bisagra de Flaps 33x9 mm (6 uds)
1 x	Bisagra de Flaps (6 uds)
1 x	Set bisagras indoor con horns integrados
1 x	Conector universal carga chispometro
1 x	Canal de ABS de 8,0x4,0x1000 mm
1 x	Tubo carbono 3K-PW (Ø30 mm, Ø26 mm L:1000 mm)
1 x	Tubo de latón (L 1000 mm, Ø8,0 mm, Ø6,1 mm
1 x	Tubo de latón (L 1000 mm, Ø7,0 mm, Ø6,1 mm)
1 x	Prisionero 6 mm Ø (4 uds)
1 x	Prisionero allen M3x5
1 x	Varilla mando doble roscada aluminio M2,5 30 mm (2 pcs)
1 x	Prisionero allen M4x4
1 x	Transmision funda/varilla octog. plastica 4/3 porta kwik link M3
1 x	Perfil de ABS rectangular 10x5,0x1000 mm
1 x	Medidor angulos y/o incidencias
1 x	Soporte WingFix ULTRA BE
1 x	Medidor ángulos
1 x	Combustible KAVAN CAR 25% 1 litro
1 x	Bisagra pin 26x11 mm (10 uds)
1 x	Bisagra 18 mm reforzada
1 x	Chispometro con cargador
1 x	Bisagra correa de latón en miniatura 1m
1 x	Bisagra pin 39x20 mm (10 uds)
1 x	Bisagra de compuerta 30x16 mm (2 pcs)
2 x	CC 11 Conector
1 x	Palas de autogiro de 330 mm
1 x	Servo HITEC D85 MG
1 x	Prisionero 3.5 mm Ø (4 uds)
1 x	Brazo doble de servo 89 mm con rodamiento (2 pcs)
1 x	Prisionero aluminio 3 mm Ø (4 uds)
1 x	Transmisión ajustable de carbono M2-250 mm (2 pcs)
1 x	PITTS CHALLENGER 87″ 2.20m (120cc) 03 ARF
1 x	ULTRA STICK 30 cc ARF
1 x	EDGE 540-A 91" (2310 mm)
1 x	Servo GO-13 MG 13g 2.8 Kg 0.12s/60º
1 x	Led (naranja - 2 pcs)
1 x	Luces V3 LED (1x red 1x green 1x white)
1 x	Led Flash (azul - 2 pcs)
1 x	Regulador PULSAR A-40
1 x	Programador HPP-21 PLUS HITEC digital servos PC
1 x	Servo KST BLS915 HV V8.0 25Kg 20mm 78g
1 x	Servo HITEC D950 TW
1 x	SERVO DES 707 BB MG
1 x	Servo HITEC HS-125 MG
1 x	Soporte servo KST X10 mini / DS135MG
1 x	Set piñones servo HITEC HS-56 HB
1 x	DC-3 Douglas (White/Blue) 1800 mm
1 x	Led (rojo - 2 pcs)
1 x	Rótula V3 aluminio M2,5 Diam con base corta (2 pcs)
1 x	Rótula INDUSTRIAL con bola M3 (2 uds)
1 x	Rótula V3 aluminio M3/5 Diam (2 pcs)
1 x	Led Flash (verde - 2 pcs)
1 x	Rótula con rodamiento M2,5 22x5,5
1 x	Bancada servo gancho
1 x	Hopper 125 ml XICOY con soporte
1 x	LASER 260 60" V2 ARF Amarillo (SkyWing)
1 x	Adaptadores carga 6s JST-XH
1 x	DUPLEX 2.4EX RC Power Switch 10
1 x	Conector ABS "T" 4.0 mm x 1000 mm
1 x	Perfil Acero Inox. 6.3x3.5x1000 mm
1 x	Perfil Acero Inox. 17.8x12.4x1000 mm
1 x	Carburador SAITO FA-120 4S glow
1 x	Cargador SKY RC e680
1 x	Brazo de servo agujero 6 mm para FEMA 9800A
1 x	Bancada para servo en Z
1 x	Soporte servos para retráctil
1 x	EXTRA NG 74" yello/blue/red (Skywing RC)
1 x	EXTRA 330L 35% pack hardware (Precision Aerobatics)
1 x	EDGE 540-A 74" (1880 mm)
1 x	SLICK 360-B 104" (2640 mm)
1 x	Hélice 9x7 SlowFlyer
1 x	Turbina XICOY X180 compact
1 x	Hélice 9x4,7 SlowFlyer
1 x	HDT Jet Central
1 x	Telemetria XYCOY adapter
1 x	Helice PT 21x13 EL
1 x	Turbina X132 H "Compact Version"
1 x	Hélice plegable CAM-Prop 8x6
1 x	Helice PT 22x10 EL
1 x	Escape turboProp K45TP
1 x	Ruedas ligeras 76 mm (2 pcs)
1 x	Pilatus PC-21 50E ROJO/BLANCO (SebArt)
1 x	Cinta adhesiva impermeable, ancho 19 mm, largo 25 m
1 x	Bayoneta aluminio ø35×1.5 mm x 500mm
1 x	Biberon 500 ccm Glow
1 x	DSM 10 Dual Switch Mixer
1 x	DUPLEX 2,4GHz MRPM EX

16,732.50EUR