74.90EUR

DSM 10 Dual Switch Mixer
[JETIDSM10]

JETI DSM 10 Dual Switch Mixer.

DSM 10 is an electronic switch for switching of two receiver batteries which are connected to one receiver. The product also includes a receiver current supply switch. Batteries that are connected to the inputs of the DSM 10 are permanently measured and connected with the aid of a hysteresis comparator either both to the output, or one of both batteries with the higher voltage only.
The DSM 10 exit consists of a MPX connector which can be used for direct connection of the exit to the receiver. The MPX connector is a fixed part of Duplex receivers with the label EPC (External Power Connector), receivers R14 and R18.
The DSM 10 is not equipped with a voltage stabilizing circuit for the connected batteries. The voltage at the DSM 10 output will always be equal to the voltage of the connected battery with the higher voltage. Make sure that receiver, servos and other equippment supplied by the DSM 10 are designed for the given voltage.
The DSM 10 is controlled by a magnetic switch which can be placed outside of the model airplane fuselage. By touching with a special magnet, the system becomes switched on or off. The electronic switch in switched on state is characterized by a minimum transitional resistance.

Weight [g] 24
Dimensions [mm] 38 x 20 x 7
Sustained current [A] 10
Operational temperature [°C] -20 ... 85
Recommended input voltage [V] 5 ... 8,4
Idle current [µA] 130
Number of battery inputs 2
Input voltage max. [V] 13
Peak current (max 5s) [A] 20

Bajo pedido

Comentarios

Búsqueda Rápida

Cesta de Compras

2 x	Sistema cierre 320 mm largo (5 pcs)
3 x	Sistema cierre 450 mm con abrazadera (2 pcs)
3 x	Abrazadera con letrero (20 pcs)
2 x	Cinta autoadhesiva 26 mm x 16.80m; Diente 1.0 mm
3 x	Sistema cierre HACKER 300 mm con abrazadera (2 pcs)
2 x	Sistema cierre 250 mm con abrazadera (2 pcs)
2 x	Sistema cierre 200 mm con abrazadera (2 pcs)
1 x	Sistema cierre 400 mm con abrazadera (2 pcs)
1 x	Cinta autoadhesiva 13 mm x 16.80m; Diente 1.0 mm
4 x	Cinta autoadhesiva 5 mm x 16.80m; Diente 0.5 mm
2 x	Cinta fibra vidrio 50 mm
2 x	Soporte para bridas de hasta 3 mm (10 pcs)
2 x	Cinta Goldfix 1m
2 x	Sistema cierre 350 mm con abrazadera (2 pcs)
2 x	Cinta fibra vidrio 25 mm
2 x	BEC Mini JETI
3 x	CC 01
1 x	Adaptador TP/TopFuel - JST-EH 4/5S
2 x	CC 03
1 x	Adaptador USB para elementos Jeti DUPLEX
2 x	Sistema cierre 330 mm con abrazadera (4 pcs)
1 x	Adaptador TP/TopFuel - XH 2/3S
1 x	Adaptador MPX-EC3 10cm
1 x	Cable BEC 30 cm (hembra)
1 x	Sistema cierre 300 mm con abrazadera (2 pcs)
1 x	Adaptador 4 LiPos XH>EH
2 x	Circlick seguridad
1 x	Cinta alerones 1m x 10mm
2 x	Adaptador 3 LiPos XH>EH
2 x	Sistema cierre Mini 14x60 mm (4 pcs)
2 x	Cable carga bateria transmisor Multiplex 2x0,5 qmm (50 cm)
2 x	Bridas 1,66x71 / 0,07x2,8"mm (20 pcs)
1 x	Cinta autoadhesiva 20 mm x 12m; Diente 1.0 mm
1 x	CC 02
2 x	Cable "Y" equilibrador 5S, 2x JST-XH / 1x JST-EH
1 x	Soporte para bridas hasta 3 mm (0,12") para tornillo M3 (10 pcs)
1 x	Adaptador MPX-Dean "T"
1 x	Cable "Y" equilibrador 7S, 2x JST-XH / 1x JST-EH
2 x	Adaptador Dean "T" - Futaba
1 x	Cable carga bateria transmisor Graupner 2x0,5 qmm (50 cm)
1 x	Adaptador 5 LiPos XH>EH
1 x	Cable de entrenamiento para GWS T4A II (maestro-alumno)
1 x	Cable "Y" carga 4 mm (2 IN-1 OUT)
1 x	Sistema cierre 480 mm con abrazadera (2 pcs)
1 x	Cable Futaba voltaje externo para telemetria
2 x	Cinta tubuladora (5 m)
1 x	Cinta fibra vidrio 38 mm
2 x	Alambre de cobre esmaltado Ø0,2 mm (5 m)
1 x	Adaptador 2 LiPos XH>EH
1 x	Adaptador MPX-XT60 10cm
3 x	Alambre cobre esmaltado 3 hilos trenzados rojo/negro/cobre Ø0,2
3 x	Sistema cierre baterías 20x200 mm
1 x	Anemometro Xplorer1
1 x	Anemometro Xplorer4
1 x	Pasacable de goma Ø 3.2 mm (4 uds)
1 x	Cable silicona hembra batt. receptor 30 cm (Futaba)
1 x	Prolongador silicona 25 cm (Futaba)
1 x	Varilla acero Ø 1,5 mm x 1500 mm
1 x	Bisagra de nylon flaps/compuertas 27x10,5 (2 pcs)
1 x	Soporte ventral para AX-18/AX-60
1 x	Horn DUBRO 1/2A
1 x	Horn de mando extra-largo ajustable aluminio 2,8x34
1 x	Funda Protectora cables Ø 10 mm 1000 mm
1 x	Chaqueta Hispano Aviación
1 x	Conexion PREMIUM fuselaje/alas 120/40 cm one4one
1 x	Funda Protectora cables Ø 6 mm 1000 mm
1 x	Perfil de ABS cuadrado 1 x 1000 mm
1 x	Varilla ABS 5,0x1000 mm
1 x	Cinta adhesiva impermeable, ancho 19 mm, largo 25 m
1 x	USB cable ALTIS
1 x	Multi-adaptador equilibradores JST - TP
1 x	MAX BEC
1 x	PSC 5
1 x	Conector Sub-D 2+5 Hembra
1 x	Prolongador 2/3 lipos conector JST - JST/C
2 x	Cable BEC 30 cm (macho)
1 x	MAX BEC 2
1 x	Interruptor SPS 70V 140/280 A
1 x	Interruptor SPS 70v 60/120A
1 x	Prolongador 5 lipos conector JST/C - JST
1 x	Interruptor RX/Batería
1 x	Conector JST SH 1,0mm macho con cable de 10 cm
1 x	Conector alas EWC3 40 cm
1 x	Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x	Capuchón BOSCH para bujía ZG 26SC/SCM, 231SLH, G230RC
1 x	Cilindro ZG-20
1 x	Caja de válvulas DA 50-R
1 x	Bancada motor ZG45/62, Long: 72 mm
1 x	Cilindro ZG-26SC/SLH
2 x	BEC 3A FOXY
2 x	APM2,6 Power module con BEC 5,3 V DC
1 x	Arandela prop. ZG45SL, ZG62/S/SL y ZG74B/ZG80B
1 x	Clips scape Ø25 mm
1 x	Carburador ZG45SL Y ZG62/S/SL
1 x	Arillo pistón para motor DA-150
1 x	Sistema cierre 240 mm con abrazadera (2 pcs)
1 x	Cinta autoadhesiva 13 mm x 16.80m; Diente 0.5 mm
2 x	Cable "Y" equilibrador 6S, 2x JST-XH / 1x JST-EH
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	Sistema de arranque a bordo (9512)
1 x	Motor autoarranque EME 35cc
1 x	Encendido glow remoto más set para montaje interior
1 x	Sistema de arranque a bordo (9724)
1 x	Cargador ISDT 608AC 200W
1 x	Polo Hispano Aviación
1 x	Bancada radial motor M
1 x	Bomba combustible SE V2
1 x	Arandela de goma M3-M4 (8 pcs)
1 x	Bancada servo tandem 4,5-5" para 2 servos
1 x	Arandela conica ancha alumino M4 Rojo (4 pcs)
1 x	Arandela conica ancha alumino M4 Azul (4 pcs)
1 x	Bancada servo tandem 4-4,5" para 2 servos
1 x	Car Charger DC/DS-16
1 x	DUPLEX 2,4EX Expander E2
1 x	DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch
1 x	DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch
1 x	Sebart 2.2 m AMARILLO/NEGRO (SebART)
1 x	Helice XOAR 24x8 Electrica
2 x	Cable carga emisora GRAUPNER
1 x	DUPLEX 2.4EX MUI 75
1 x	Conector CAN 15
1 x	Cable carga bateria transmisor Futaba 2x0,5 qmm (50 cm)
1 x	DUPLEX 2.4EX MAlti (Rev.2)
1 x	DUPLEX 2,4 EX MUI150 Sensor
1 x	DUPLEX 2.4EX MULi 6s M
1 x	Conectores para alas del Fox MDM1
1 x	DUPLEX 2.4EX Central Box 210
1 x	Condensador AddCAP 10AS
1 x	Pupitre negro para emisora Jeti DC-16/14/24
1 x	Interruptor SAFETY dos posiciones DS-16/14
1 x	Cable carga XT90
1 x	Sensor de temperatura DUPLEX 2.4EX MT 125
1 x	Adaptador (GP/KO hasta 4S) para CellPRO 4S
1 x	Receptor de satélite DUPLEX 2,4EX Rsat2
1 x	Bateria RX JETI LiIon RB 2600 7.2v
1 x	Conexion PREMIUM fuselaje/alas para 3 servos SUB-D 160 cm
1 x	DUPLEX 2,4 EX MU 3 Sensor
1 x	CC 05
1 x	Interruptor SAFETY dos posiciones DC-16/14
1 x	Caps multicolor Switch JETI
1 x	Adaptador JST-XH
1 x	DUPLEX 2.4EX MT 300 EX
1 x	DUPLEX 2,4 EX MBar
1 x	Bateria RX JETI LiIon RB 3100 7.2v
1 x	DUPLEX 2.4EX Central Box 220 + 2x Rsat2
1 x	DUPLEX 2.4EX Central Box 220
1 x	DUPLEX 2.4EX RC Power Switch 10
1 x	DPSI Ampere battery backer
1 x	DUPLEX 2,4 EX MVario2
1 x	Stick DUPLEX con interruptor 2 posiciones para DC/DS

7,067.40EUR