398.99EUR

DUPLEX 2.4EX Central Box 320
[JETCB320]

JETI Duplex 2.4EX Central Box 320

Product description and features
The Central Box 320 is designed for a complete management of multiple servos and two receiver batteries for a model with high security requirements. The Central Box 320 has an overload protection on each servo output, 8 channels for high-performance servos up to 60 kg / cm and 10 channels for standard servos up to 30 kg / cm. Especially for the use of powerful and power-hungry servos, the Central Box 320 has an aluminum housing for better cooling. The Central Box 320 offers true battery redundancy, DITEX servo telemetry, JETI EX telemetry and up to three receiver inputs (2x 2.4GHz and 1x 900MHz) for full power and RF signal redundancy.
Configuration via JETI Duplex DS/DC transmitters
With JETI Duplex DC/DS transmitters, the full potential of the Central Box 320 can be fully exploited. The device overview of the JETI Duplex DS/DC transmitter makes it easy to perform the entire configuration of the servo outputs, DITEX servo and JETI EX telemetry, function assignment, and more.

Compatibility with Futaba
The Central Box 320 can also be used with two S.Bus receivers (e .g Futaba R7003SB). Setting up and reading out the telemetry values must, however, be realized with a separatly available JETIBOX.
Switching on and off
The switching on and off process of the Central Box 320 is done with the supplied magnetic switch.
Recommended receivers
As receiver e. g. 2 RSat2 or REX3 receivers can be used. Optionally, the use of a REX Assist receiver in combination with a RSat2 receiver is possible, so you get a Central Box with gyro stabilization.

Features
Adjustable powerful BEC for voltage stabilization (connection of standard or HV servos)
DITEX servo telemetry support
Possibility to connect up to 3 receivers with serial communication
built-in Expander function with the possibility of independent connection of up to four JETI EX sensors
Input for magnetic switch or RC switch
Power supply batteries connected via MPX connector
100Hz mode of servo outputs (10ms period)
EX telemetry support (measurement of voltage, current, capacity, temperature, etc.)
Easy settings changes via DC/DS transmitter („Device explorer“)
Robust metal construction with mounting holes

temporarily out of stock

Reviews

Quick Find

Shopping Cart

1 x	Trailing edge BALSA 35x8x1000 mm
1 x	BALSA trip 6.0x6.0x1000 mm
1 x	BALSA leading edge 8x10x1000 mm
2 x	BALSA trip 2.0x10.0x1000 mm
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	Beech dowels 2.0 x 1000 mm
2 x	Liston HAYA 3 x 10 x 1000 mm
1 x	Beech dowels 4.0 x 1000 mm
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Glases Nimbus
1 x	BALSA triangular 10x10x1000 mm
1 x	Glases Flitemaster
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	Mahogany wood slat 1.5x1.5x1000 mm
2 x	BALSA triangular 8x8x1000 mm
1 x	Glases Innovation Plus
2 x	Glases Ace
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	Beech dowels 3.0 x 1000 mm
2 x	Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
1 x	Linden wood slat 2.0x2.0x1000 mm
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	Pine wood slat 3.0x10.0x1000 mm
1 x	Zurich Sport Sunglasse Dark Sensity BROWN Glasses
1 x	Mahogany wood slat 2.0x2.0x1000 mm
2 x	Pine wood slat 6.0x6.0x1000 mm
1 x	Pine wood slat 3.0x5.0x1000 mm
1 x	Pine wood slat 10x10x1000 mm
1 x	Glases Moritz
2 x	Liston HAYA 10 x 10 x 1000 mm
1 x	Glases Stratus
1 x	Wheel collar 2 mm Ø (4 uds)
2 x	Servo arm with 5 mm hole to FEMA 9810A
1 x	Y-Hose connector 3-3-3 mm
1 x	Quick hose connector 3-3 mm
2 x	Quick hose connector 3-3 mm
1 x	Wheel cover holder Ø 6 mm (2 uds)
1 x	Tap FESTO 6-6 mm
2 x	Landing gear strap medium (4 uds)
1 x	Landing gear axle Ø 5 mm (2 uds)
1 x	Landing gear strap small (4 uds)
2 x	Air pressure gauge
1 x	T-Hose connector 4-4-4mm
1 x	Faucet FESTO
1 x	Festo Adaptor Tygon Large/4mm
1 x	Y-Hose connector 6-6-6 mm
1 x	5 line servos wire black (1 m)
1 x	Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x	Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x	White silicone 0,25 qmm wire (150 m)
2 x	Cable Cargador FUTABA
1 x	100m servo "Premium" wire (white/red/blue)
1 x	Silicone 0,50 qmm servos wire Futaba (100 m)
4 x	PVC 0,08 qmm Futaba servos wire (5 m)
1 x	200m servo "Premium" wire (white/red/blue)
1 x	10m servo "Premium" wire (white/red/blue)
1 x	JR silicone servo wire 0,35 qmm / 5m
1 x	PVC 0,14 qmm servos wire Graupner (100 m)
2 x	Silicone 0,25 qmm servos wire Graupner (100 m)
1 x	Silicone 0,14 qmm servos wire Graupner (100 m)
1 x	Black silicone 0,25 mm² wire (25 m)
1 x	White silicone 0,25 qmm wire (100 m)
1 x	PIX Hawk with accesories
1 x	FALCON 20X9 CARBON PROPELLER (GAS)
1 x	PPM Encoder Module
2 x	Xplorer1 anemometro
1 x	Xplorer2 anemometro
1 x	Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x	Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x	PRO-HV Dual Action Valve
1 x	ARAMID honeycomb 1300x2600x2 mm
1 x	Straightened rod Ø 5.5 mm x 1000 mm
1 x	Balsa panel 8.0x100x1000 mm
1 x	BALSA trip 3.0x3.0x1000 mm
2 x	A/C quality beech plywood 600x300x1.5 mm
1 x	Balsa panel 10x100x1000 mm
1 x	A/C economy plywood 600x300x6+.0 mm
1 x	A/C quality beech plywood 600x300x8.0 mm
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Birch plywood plate 600x300x2.0 mm
1 x	Nylon threaded block M5 (2 uds)
1 x	Aluminun wheel collar 4 mm Ø (4 uds)
2 x	Polyurethan FESTO hose 3x0,5 mm, transparent
1 x	40 mm air cylinder
2 x	Nylon gear block Ø 3 mm (2 uds)
1 x	Festo 4mm Tubing Holder (10 uds)
2 x	Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x	Festo 6mm Tubing Holder (10 uds)
2 x	Aluminun wheel collar 2 mm Ø (4 uds)
1 x	Dual Sequencer Gear and Canopy
1 x	Angled clevis with threaded rod M3
1 x	Racor 3/3 mm
1 x	Check valve quick hose connector 4-4 mm
1 x	Carbon plate 350x150x1.0 mm
1 x	Body for landing gear Ø 3 mm
1 x	Protective open Cover for wires Ø 13 mm 1000 mm
2 x	XH 30 cm Male extension 0,25 mm2 silicone cable for 2 cell
1 x	Protective Cover for wires Ø 10 mm 1000 mm
1 x	Protective Cover for wires Ø 6 mm 1000 mm
2 x	Fiberglass heat shield Ø 6 mm 1000 mm
2 x	Fiberglass heat shield Ø 4 mm 1000 mm
1 x	Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T,
1 x	Silicon red 1,0 qmm cable ( 25 m)
2 x	Silicone black 1,0 qmm wire ( 1 m)
1 x	Sandwich carbon + poplar 2mm + carbon 480x290 mm
1 x	Silicone red 2,5 qmm wire ( 1 m)
1 x	DPSI magnetic switch actuator (PCB)
1 x	LOWER TOW HOOK
1 x	Silicone 0,35 qmm servos wire Graupner(100 m)
1 x	PVC 0,14 qmm servos wire JR/Graupner (5 m)
1 x	1 m servo "Premium" wire (white/red/blue)
1 x	EVP Unit for AXI2208/xx and 2212/xx
1 x	XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell
1 x	Silicone red 1,5 qmm wire ( 1 m)
1 x	Silicone red 4,0 qmm wire ( 1 m)
1 x	Fiberglass heat shield Ø 8 mm 1000 mm
1 x	PVC 0,25 qmm servos wire Graupner (5 m)
1 x	Silicone black 6,0 qmm wire (25 m)
1 x	Tube Pitot to PIXHAWK
1 x	Protective Cover for wires Ø 6 mm 1000 mm
1 x	Silicone black 0,5 qmm wire ( 1 m)
1 x	Silicone black 2,5 qmm wire ( 1 m)
1 x	Sandwich carbon + poplar 2mm + carbon 290x160 mm
1 x	PVC 0,14 qmm servos wire Hitec/Mpx (5 m)
1 x	SERVO DES 707 BB MG
1 x	10 mm Quick clamp_L (6 pcs)
2 x	Silicone black 4,0 qmm wire ( 1 m)
2 x	Silicone black 0,75 qmm cable ( 1 m)
1 x	Servo JETI DSHV 3D13T (13 Kg)
1 x	Pine wood slat 5.0x5.0x1000 mm
1 x	8Wx2 Navigation & Strobe, 11mm Red/White
1 x	Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø14 mm, Ø12 mm)
1 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	Carbon tube (L 1000 mm, Ø18 mm, Ø15 mm)
1 x	Horn with ball 40x30
1 x	Small aluminium horn red (2pcs)
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Horn 13,5x16 mm (2 pcs)
1 x	Brass control horn M4 short for wire (4 pcs)
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	Small aluminium horn blue (2pcs)
1 x	Small aluminium horn gold (2pcs)
1 x	Horn for flap control (1 pcs)
1 x	RH long aluminium horn (2pcs)
1 x	Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x	460 mm EPP Floats
1 x	Wheel Ø 90 mm (1 ud) Electron Retracts
1 x	Electric Landing Gear AVANTI XS (Elektron Retracts)
1 x	RB-45 Electronic
1 x	Balsa panel 2.5x100x1000 mm
1 x	BALSA trip 8.0x8.0x1000 mm
1 x	Bujia OS G5 gasolina
1 x	DLE 55 carburetor
1 x	Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm)
1 x	Balsa panel 3.0x100x1000 mm
1 x	Beech dowels 10 mm x 1000 mm
1 x	A/C quality beech plywood 1520x750x3.0 mm
1 x	Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm)
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	BALSA trip 10x10x1000 mm
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x	A/C quality beech plywood 600x300x5.0 mm
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	Wheel cover holder Ø 5 mm (2 uds)
1 x	Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x	Spark motor OS nº 8
1 x	Racor 4/3 mm
1 x	Tap FESTO 4-4 mm
1 x	Servo arm with 4 mm hole to FEMA 9810A
1 x	Wheel collar 5 mm Ø (4 uds)
1 x	SAITO FG-36 carburetor
1 x	Y-Hose connector 4mm
1 x	550 cc gasoline fuel tank complet
1 x	Conector FESTO M3 Quick 3mm 90º
1 x	XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell
1 x	Round flex hinge (12 uds)
1 x	XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell
1 x	Spark plug key NGK MVVS
1 x	Electronic double valve landing gear
1 x	EXTREME FLIGHT BLUE MAGNETIC ROUND FILLER PLUG
1 x	Extra hard 1500 ccm complete gasoline fuel tank
1 x	"Taxi Tank" Fuel Tank
1 x	diameter silicone tube for glow
1 x	280 cc gasoline fuel tank complet
1 x	500 ccm complete gasoline fuel tank
1 x	Black "FUEL VENT" round aluminum overflow socket
1 x	Double side nipple
1 x	PowerBox Smokepump JETs 2x outside
1 x	Cable set Premium™ MAXI "one4two"
1 x	Green silicone 0,25 mm² wire (25 m)
1 x	Axle for AXI 5325/xx motors
1 x	Motor HP 220/30/A3 P4 5:1
1 x	DUPLEX 2.4EX MU 3 Sensor
1 x	PPM to Jack link - Tx Black (mono) DC/DS Tx DUPLEX 2,4EX
1 x	DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch
1 x	Electric Landing Gear GS-200 ULTIMATUM 2.0 (Elektron Retracts)
1 x	Electric Landing Gear "Black Edition" ULTIMATUM 2.0 (Elektron Re

9,395.46EUR