398.99EUR

DUPLEX 2.4EX Central Box 320
[JETCB320]

JETI Duplex 2.4EX Central Box 320

Product description and features
The Central Box 320 is designed for a complete management of multiple servos and two receiver batteries for a model with high security requirements. The Central Box 320 has an overload protection on each servo output, 8 channels for high-performance servos up to 60 kg / cm and 10 channels for standard servos up to 30 kg / cm. Especially for the use of powerful and power-hungry servos, the Central Box 320 has an aluminum housing for better cooling. The Central Box 320 offers true battery redundancy, DITEX servo telemetry, JETI EX telemetry and up to three receiver inputs (2x 2.4GHz and 1x 900MHz) for full power and RF signal redundancy.
Configuration via JETI Duplex DS/DC transmitters
With JETI Duplex DC/DS transmitters, the full potential of the Central Box 320 can be fully exploited. The device overview of the JETI Duplex DS/DC transmitter makes it easy to perform the entire configuration of the servo outputs, DITEX servo and JETI EX telemetry, function assignment, and more.

Compatibility with Futaba
The Central Box 320 can also be used with two S.Bus receivers (e .g Futaba R7003SB). Setting up and reading out the telemetry values must, however, be realized with a separatly available JETIBOX.
Switching on and off
The switching on and off process of the Central Box 320 is done with the supplied magnetic switch.
Recommended receivers
As receiver e. g. 2 RSat2 or REX3 receivers can be used. Optionally, the use of a REX Assist receiver in combination with a RSat2 receiver is possible, so you get a Central Box with gyro stabilization.

Features
Adjustable powerful BEC for voltage stabilization (connection of standard or HV servos)
DITEX servo telemetry support
Possibility to connect up to 3 receivers with serial communication
built-in Expander function with the possibility of independent connection of up to four JETI EX sensors
Input for magnetic switch or RC switch
Power supply batteries connected via MPX connector
100Hz mode of servo outputs (10ms period)
EX telemetry support (measurement of voltage, current, capacity, temperature, etc.)
Easy settings changes via DC/DS transmitter („Device explorer“)
Robust metal construction with mounting holes

temporalmente fuera de stock

Comentarios

Búsqueda Rápida

Cesta de Compras

2 x	Cono TRIPALA 70 x 70 mm Fibra GFK
1 x	Cono 80 mm Fibra GFK
1 x	Cono 140 mm Fibra GFK
2 x	Cono 60 mm Fibra GFK
1 x	Cono 105 mm Carbono CFK
2 x	Cono CFK-BS 104x131 mm 115 g
3 x	Cono TRIPALA 85 x 80 mm Fibra GFK
3 x	Cono 159x200 mm Fibra GFK
2 x	Cono 105 mm Fibra GFK
2 x	Cono 90 mm largo Fibra CFK con tornillo central
2 x	Cono TRIPALA 70 x 84 mm Fibra GFK
1 x	Cono 110 mm Fibra GFK
2 x	Cono 90 mm Fibra GFK
1 x	Cono 90 mm Carbono CFK
1 x	Cono 125 mm Fibra GFK
1 x	Cono 115 mm Fibra GFK
1 x	Cono 100 mm Fibra GFK
2 x	Pasta para estaño 20 g
2 x	Pasta universal color Blanco (RAL 9003) 1 Kg
1 x	Plasti Dip Liquid Tape 429 ml rojo
3 x	Spray pintura Elapor Rojo 400 ml
3 x	Plasti Dip Liquid Tape 429 ml naranja
2 x	Silicona adhesiva ELASTOSIL E4 tube 90ml
2 x	Pasta universal color blanco 50 g
1 x	Instrumentos individuales 1/4 Planeador
1 x	Liston ABS 1,0x2,0x1000 mm
1 x	Varilla ABS 2,0x1000 mm
1 x	Varilla ABS 4,0x1000 mm
1 x	Liston ABS I 20x10x1000 mm
2 x	Rueda KOVO SLH 120x60 mm
2 x	Varilla ABS 1,5x1000 mm
1 x	Liston ABS H 1,5x1,5x330 mm
2 x	Liston ABS I 3,5x1,75x330 mm
1 x	Varilla ABS 2,5x1000 mm
2 x	Liston ABS I 10x5x1000 mm
1 x	Liston ABS 1,5x4,0x1000 mm
1 x	Varilla ABS 5,0x1000 mm
1 x	Liston ABS 2.0x5.0x1000 mm
1 x	Conector banana oro 2 mm
1 x	Tornillo M4x0,7x20 mm Cabeza Botón alum. anodizado azul oscuro(4
1 x	PVC termo-retráctil batería 165 mm transparente (1 m)
1 x	PVC termo-retráctil batería 165 mm transparente (10 m)
1 x	Actuador lineal HLS12-100210-7.4v
1 x	Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x	Varilla ABS 6,0x1000 mm
2 x	Liston ABS 1,0x3,0x1000 mm
1 x	Amortiguador FEMA 150 Newtons
2 x	Liston ABS 1,0x4,0x1000 mm
1 x	Eje ruedas 4x21 mm (2 uds)
1 x	Amortiguador FEMA 400 Newtons
1 x	Soporte ECU Xicoy X-45
1 x	Eje ruedas Ø 4 mm (2 uds)
1 x	Cera desmoldeante 250ml
1 x	Muleta 42 mm 0º [6 mm]
2 x	Pistola para botes de pintura
2 x	Cera desmoldemante "Alta Temperatura" 340g
1 x	Cono tripala hélice plegable 36 mm diámetro / eje 5,0 mm
1 x	Muleta tripala 47 mm 0º
1 x	Cono blanco autoventilado hélice plegable 36 mm diámetro / eje 6
1 x	Cono recambio tripala 40/42 mm
1 x	Disolvente Plasti Dip 1000 ml
1 x	Cono blanco 40-45 mm (recambio)
1 x	Relleno balsa HobbyLite
1 x	Muleta 52 mm + 2,5º
4 x	Pasta universal color Jet Black 250 g
1 x	Muleta cuatripala 42 mm
1 x	Muleta 47 mm + 5º
1 x	Bungee HLG Premium
1 x	Tapaporos 1000 ml (DOPE)
1 x	Cuadricóptero F450/F550, Tren de aterrizaje
1 x	Barniz Tensor 1000 ml
1 x	Tapaporos 500 ml (DOPE)
1 x	Servo RHINO pro SHV digi 4
1 x	Bancada servo tandem 4,5-5" para 2 servos
1 x	Cable Cargador FUTABA
1 x	Bancada servo tandem 3,5-4" para 2 servos
1 x	Cable servos silicona 0,35 mm2 Futaba (100 m)
1 x	Cable servos PVC 0,14 mm2 Graupner (100 m)
1 x	Varilla mando roscada M2,5 (2 uds)
3 x	Brazo servo aluminio V3-Futaba 3-3,5" rojo
1 x	SistemaLDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 mm
2 x	Brazo servo aluminio V1-JR 1,0" M2 dorado
1 x	Cable PVC 2 x 0.25 mm2 (5 m) rojo-negro
1 x	Motor A2212/13T
1 x	Cable servos PVC 0,25 mm2 Graupner (5 m)
2 x	Brazo servo aluminio V2-JR 1,25" M3 gold
1 x	Brazo servo aluminio V2-Hitec 1,5" M3 azul
2 x	Brazo servo aluminio V2-JR 2,0" M3 dorado
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm
1 x	Cable silicona 0,25 mm² blanco (25 m)
1 x	Cable servos silicona 0,25 mm2 Graupner (5 m)
2 x	Bancada montaje servo M (azul)
1 x	Cable servos silicona 0,25 mm2 Graupner (100 m)
1 x	Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x	Brazo servo aluminio V1-Futaba 23 mm M2 rojo
1 x	Brazo servo aluminio V1-Futaba 1,5" M3 rojo
1 x	Cable servo PVC 0,14 mm2 FUTABA (5 m)
1 x	Brazo servo aluminio V2-Futaba 1,75" M3 rojo
2 x	Brazo servo aluminio V2-Futaba 2,0" rojo
2 x	Brazo servo aluminio V1-Futaba 17 mm M2 rojo
2 x	Brazo servo aluminio V1-Futaba 20 mm M2 rojo
2 x	Bancada servo tandem 3-3,5" para 2 servos
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 6 m
1 x	Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x	Cable servo PREMIUM 100m (blanco/rojo/azul)
1 x	Brazo servo aluminio V3-Futaba 1,25" M3 rojo
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m
1 x	Brazo servo aluminio V2-Futaba 1,25" M3 rojo
1 x	CC 01
1 x	Cable BEC 30 cm (macho)
1 x	Cable "Y" carga 4 mm (2 IN-1 OUT)
1 x	Cable carga emisora GRAUPNER
1 x	Cable carga XT90
1 x	Cuadricóptero Q-250 Kit Carbono
1 x	T-Motor MN705-S Kv125 (pack 2 uds)
1 x	Brazo servo aluminio V1-JR 1,25" M3 oro
1 x	Cable servo JR silicona 0,35 mm2 / 5m
2 x	Liston ABS 1,5x6,0x1000 mm
1 x	T-Motor U7-V2.0 Kv420
1 x	Perfil de ABS de media caña 2,0x1000 mm
1 x	Conector ABS "H" 4.0 mm x 1000 mm
1 x	Perfil Acero Inox. 19.5x9.8x1000 mm
1 x	Canal de ABS de 3,0x6,0x1000 mm
1 x	Canal de ABS de 2,0x4,0x1000 mm
1 x	Conector ABS "L" 1.0 mm x 1000 mm
1 x	Conector ABS "CRUZ" 4.0 mm x 1000 mm
1 x	Perfil Acero Inox. 15.5x8.5x1000 mm
1 x	Perfil de ABS "L" 5,0x5,0x1000 mm
1 x	Perfil de ABS "T" 10.0x10.0x1000 mm
1 x	Perfil de ABS "L" 6,0x6,0x1000 mm
1 x	Perfil de ABS "L" 10,0x10,0x1000 mm
1 x	Perfil de ABS cuadrado 3 x 1000 mm
1 x	Perfil de ABS "T" 2.0x2.0x1000 mm
1 x	Perfil de ABS "L" 2,0x2,0x1000 mm
1 x	Perfil Acero Inox. 10.5x5.7x1000 mm
1 x	Perfil de ABS cuadrado 2 x 1000 mm
1 x	Perfil Acero Inox. 14.5x9.6x1000 mm
1 x	Perfil de ABS de media caña 3x1000 mm
1 x	Perfil de ABS "L" 4,0x4,0x1000 mm
1 x	Canal de ABS de 8,0x4,0x1000 mm
1 x	Perfil Acero Inox. 17.8x12.4x1000 mm
1 x	Perfil de ABS de media caña 2,5x1000 mm
1 x	Perfil de ABS "T" 4.0x4.0x1000 mm
1 x	Perfil de ABS cuadrado 4 x 1000 mm
1 x	Perfil de ABS "L" 1.5x1.5x1000 mm
1 x	Cable BEC 30 cm (hembra)
1 x	Cable "Y" equilibrador 6S, 2x JST-XH / 1x JST-EH
1 x	Cono autoventilado hélice plegable 40 mm diámetro / eje 5,0 mm
1 x	Adaptador 3,0 mm M8 para cono 40 mm hélice pleg.
1 x	Amortiguador FEMA 100 Newtons
1 x	Suncover 100cc Red
1 x	Sun Cover PC 21 XXL (JMB Jets)
1 x	Cono plástico blanco hélice plegable 50 mm diámetro
1 x	Cono plástico blanco hélice plegable 40 mm diámetro
1 x	Cono recambio tripala 36 mm
1 x	Hélice POWER-PROP 11x6
1 x	VBar Control RX-Satellite
1 x	Acoplador helices 6/8 mm
1 x	Cable silicona 0,25 mm2 blanco (150 m)
1 x	Prolong. XH / XH 30 cm para 6 elem. cables silicona 0,25 mm2
1 x	Prolong. Hembra XH 30 cm para 4 elem. cables silicona 0,25 mm2
1 x	Cable silicona 1,5 mm2 rojo (25 m)
1 x	Brazo servo aluminio V1-Hitec 1,0" M2 azul
1 x	Brazo servo doble aluminio HITEC 2,5" M3 azul
1 x	Brazo servo aluminio V2-Hitec 1,25" M3 azul
1 x	Brazo servo aluminio V2-JR 1,0" M3 gold
1 x	Funda Protectora espiral transparente cables Ø 0,5/50 mm - 25 m
1 x	Brazo servo aluminio V1-Hitec 20 mm M2 azul
1 x	Hélice MENZ-S 18x10 Tripala
1 x	Hélice MEJLIK 26x12 N-3 Palas
1 x	Adaptador 4,0 mm M8 para cono 40 mm hélice pleg.
1 x	Cono blanco 38-45 mm (recambio)
1 x	Muleta 38 mm 0º
1 x	Cono plastico negro hélice plegable 30 mm diámetro / eje 3,2 mm
1 x	Cono blanco 30-36 mm (recambio)
1 x	Cono autoventilado recambio 50 mm diámetro blanco
1 x	Tornillo Servos M2x9/16 (4 pcs)
1 x	Cono negro 40-45 mm (recambio)
1 x	Disolvente barniz tensor 500 ml
2 x	Cono plastico blanco hélice plegable 42 mm diámetro
1 x	Muleta 42 mm - 5º
1 x	Cono rojo 45 mm (recambio)
1 x	Relleno Presto SF Light Filler styrene-free (420 g)
1 x	Muleta 42 mm + 5º
1 x	Muleta 42 mm - 2,5º
1 x	Plasti Dip Liquid Tape 429 ml negro
1 x	Hélice POWER-PROP 10x7 Izda
1 x	DUPLEX 2,4 EX MUI150 Sensor
1 x	Helice HUNTER 480
1 x	Hélice POWER-PROP 15x8
1 x	Hélice POWER-PROP 16x10

6,637.91EUR