Top » Catalog » Jeti » JETCB320

398.99EUR

DUPLEX 2.4EX Central Box 320
[JETCB320]


JETI Duplex 2.4EX Central Box 320

Product description and features
The Central Box 320 is designed for a complete management of multiple servos and two receiver batteries for a model with high security requirements. The Central Box 320 has an overload protection on each servo output, 8 channels for high-performance servos up to 60 kg / cm and 10 channels for standard servos up to 30 kg / cm. Especially for the use of powerful and power-hungry servos, the Central Box 320 has an aluminum housing for better cooling. The Central Box 320 offers true battery redundancy, DITEX servo telemetry, JETI EX telemetry and up to three receiver inputs (2x 2.4GHz and 1x 900MHz) for full power and RF signal redundancy.
Configuration via JETI Duplex DS/DC transmitters
With JETI Duplex DC/DS transmitters, the full potential of the Central Box 320 can be fully exploited. The device overview of the JETI Duplex DS/DC transmitter makes it easy to perform the entire configuration of the servo outputs, DITEX servo and JETI EX telemetry, function assignment, and more.

Compatibility with Futaba
The Central Box 320 can also be used with two S.Bus receivers (e .g Futaba R7003SB). Setting up and reading out the telemetry values must, however, be realized with a separatly available JETIBOX.
Switching on and off
The switching on and off process of the Central Box 320 is done with the supplied magnetic switch.
Recommended receivers
As receiver e. g. 2 RSat2 or REX3 receivers can be used. Optionally, the use of a REX Assist receiver in combination with a RSat2 receiver is possible, so you get a Central Box with gyro stabilization.

Features
Adjustable powerful BEC for voltage stabilization (connection of standard or HV servos)
DITEX servo telemetry support
Possibility to connect up to 3 receivers with serial communication
built-in Expander function with the possibility of independent connection of up to four JETI EX sensors
Input for magnetic switch or RC switch
Power supply batteries connected via MPX connector
100Hz mode of servo outputs (10ms period)
EX telemetry support (measurement of voltage, current, capacity, temperature, etc.)
Easy settings changes via DC/DS transmitter („Device explorer“)
Robust metal construction with mounting holes


temporarily out of stock
temporarily out of stock

Reviews
Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
What's New?
Turbina XICOY X240 compact
Turbina XICOY X240 compact
3,385.00EUR
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Shopping Cart
2 x TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
2 x Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
2 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x Carbon Non-Woven, 160 g/m² 100 cm 10 m
2 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
2 x Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x ARAMID honeycomb 1300x2600x2 mm
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
3 x Carbon fibre sleeve 12k 170 mm x 5m
1 x Carbon Non-Woven, 160 g/m² 100 cm 25 m
1 x Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
2 x Carbon fibre tape 200 g/m² (unidirectional) 50 mm
2 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
2 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x Demoulding wedge red (40 x 20 mm) 5 pcs
2 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
2 x 2,3 mm Prop Adapter M5
1 x Locking cable tie 3.2x142 (uds)
1 x Stainless steel cable Ø 0.5 mm (10 m)
1 x Locking cable tie 4.6x203 (uds)
1 x Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
2 x Covered closure or fairings
1 x Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x Steering arm 12 mm Ø 4 mm (2 uds)
1 x Crimping sleeves for cable 0.70 mm (10 pcs)
1 x Canopy Lock V1 M3 Blue (2 pcs)
1 x Cierre cabina aluminio Ø4, I=10 mm
2 x Electric spoiler 250 mm (2 pcs)
1 x Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x Screw-lock connector Ø 2 mm (2 uds)
1 x Screw-lock connector M2 (2 uds)
1 x Canopy Lock V1 M3 Red (2 pcs)
1 x Stainless steel cable Ø 0.5 mm (20 m)
1 x Canopy Latch
1 x Crimping sleeves for cable 1.3 mm (10 pcs)
2 x Steering arm 12 mm Ø 4 mm
1 x Steering arm 16 mm Ø 4 mm
1 x Stainless steel cable Ø 1.3 mm (10 m)
1 x One touch canopy lock
1 x Steering arm 16 mm Ø 3 mm
1 x Stickers-digit for marking
3 x SUS wire 3m (nylon coated)
1 x Cabin latch Fox MDM1 4m (pair)
2 x Steering arm 12 mm Ø 3 mm (2 uds)
1 x Crimping sleeves for cable 0.85 mm (10 pcs)
1 x L cockpit anchor "tipe F3A" (2 pcs)
1 x Initior Receiver FRX2 Wireless
1 x PCARD Wireless System
1 x M3 INDUSTRIAL ball link (2 uds)
1 x Anodized aluminium servo M4x5/8 screw (4 red pcs)
1 x Horn micro type4 Ø 0,5 (2 pcs)
2 x Panel Honeycom carbon 350x150x3.5mm
1 x Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m
1 x Styrene plate 320x120x0.5 mm
2 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x Sheet Depron Aero 1250x800x3 mm
1 x Carbon Non-Woven, 240 g/m² 100 cm x 2m
1 x Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 20m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x Styrene plate 320x120x1.0 mm
1 x Sandwich carbon + poplar 2mm + carbon 480x290 mm
1 x Colormatic 2K Soft fine putty white, 1 kg
1 x Fiberglass plate 350x150x0.3 mm
1 x Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m
1 x Carbon Non-Woven, 160 g/m² 127 cm 1 m
2 x Peel ply 100 g/m² (plain weave) 50 cm x 2m
1 x Foam plastic plates (310x210x5 mm)
1 x 3,2 mm Prop Adapter M5
1 x 6 mm Prop Adapter M8
1 x Carbon plate 350x150x1.0 mm
2 x Vacuum bag, 1200 mm x 50 m
2 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x 15 mm floating pad (30 pcs)
1 x SAITO FG-36 carburetor
1 x Capstan of plastic 91x44x45 mm
1 x Cannon 12.7 cm (2 pcs)
1 x Cannon 53/6 mm
1 x Klumpblock (Plastik), Höhe 5 mm, 1 Rille, 20 Stück
1 x Boat with oars 110 mm
1 x BOX-Setup Actro-marine
1 x Carbon roving DowAksa / 24k / 1600 tex
1 x Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
3 x PH5 adapter for 5mm M8 axi for AXI2820 y 2826
1 x Foaming agent for epoxy resins 200 g
1 x Lead with adhesive (2 pcs)
1 x Cierre cabina aluminio Ø5, I=16 mm
1 x Cable grommet Ø 5 mm (4 uds)
1 x Fully Threaded Steel Rod M2,0 (2 uds) 250mm
1 x 140 mm rods set for direction control
2 x Cable grommet Ø 6.4 mm (4 uds)
1 x Aluminium alloy coupler for carbon tube 6/M4
1 x Cockpit plastic closing
1 x Wing bolts M3 Steel screw blue (2 pcs)
1 x Glass Bubbles (0,12 g) 350 ml
1 x Silicone black 0,75 qmm cable ( 1 m)
2 x 3.2 mm Prop Adapter M8
1 x Rocket cardboard tube 25mm x 24mm x 230mm
1 x Rocket D9-7
1 x Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR)
1 x ALU servo arm 90º 3 mm shaft
1 x USB Interface REVOLECTRIX for CellPRO 10s
2 x Hardener Aero EPH 161 (500 g)
1 x PARTALL® Hi-Temp Wax, 340 g
1 x Mould Resin P 10 kg
1 x Universal Colour Paste white 50 g
1 x 8 mm Adapter for AXI53xx
1 x Peel ply 95 g/m² (plain weave) 20 mm x 100 m
1 x Split M1,2x10 (10 pcs)
1 x Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs)
1 x Snap pin for micro clevis (10 uds)
1 x Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs)
1 x Propeller POWER-PROP 14x9 Izda
1 x Premium servo extension 100cm
1 x Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
1 x Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs
1 x GlassBubbles 2.5 g/cm³ Panda, tin (approx. 1 l)
1 x Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g
1 x PH6 adapter for 6mm M10 AXI for AXI41xx
1 x Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x White gelcoat 1 Kg
1 x Release wax 250ml
1 x Presto SF Light Filler styrene-free (420 g)
1 x Universal Colour Paste signal white (RAL 9003) 1 Kg
1 x Frontal Adapter for AXI53xx
1 x Peel ply 93 g/m² (plain weave) 150 cm x 5m
1 x Release film 100 cm x 50 m
1 x PET film Mylar® A 350, 50 cm, roll/ 5 m
1 x Thixotropic agent TM 100, tin/ 415 g (approx. 5 l)
1 x MEKP Harderner 100 g
1 x Mould Resin P + Hardener EPH 161-P, kit/ 585 g
1 x Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm)
1 x Universal Colour Paste deep black 50 g
1 x Teflon rollers 40 mm x 15 mm Diam.
1 x Latex Gloves GRIP, size L, box/ 100 pcs
1 x Steering arm 16 mm Ø 3 mm (2 uds)
1 x Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs)
1 x Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs)
1 x Propeller 8x4,3 SlowFlyer
1 x Split pin 1.6x16 mm (10 uds)
1 x Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs)
1 x Propeller 9x4,7 SlowFlyer
1 x Fully Threaded Steel Rod M3
1 x Fully Threaded Steel Rod M2,5 (2 uds)
1 x Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs)
1 x Allen wheel collar M3x3
1 x Propeller APC 12x6 Glow/Gas
1 x Propeller APC 16x10 Glow/Gas
1 x 100 mm rods + T patellas set for direction control
1 x 140 mm rods + T patellas set for direction control
1 x Propeller APC 10x6 Glow/Gas
1 x 100 mm rods set for direction control
1 x 41x5,5 mm wires output (2 pcs)
1 x Aluminun wheel collar 2 mm Ø (4 uds)
2 x 3-blades 24x12 carbon prop Super Silence
2 x DUPLEX 2.4EX MSpeed PITOT <300 Km/h
1 x Battery RX JETI LiIon RB 5200 7.2v
1 x DUPLEX 2,4GHz MRPM EX
1 x FIALA Propeller 24x10
2 x DUPLEX 2.4EX RC Power Switch 10
2 x 24x14 prop Super Silence
2 x FIALA Propeller 27x10
2 x DUPLEX 2,4EX Stick with 3-Position Switch for Transmitter DC/DS
2 x DUPLEX 2.4EX Expander E4
1 x DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch
1 x FALCON 24X12 CARBON PROPELLER (GAS)
1 x Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x 250 mm / 16 mm Airbrakes
1 x 45 mm rods set for direction control
1 x Cable grommet Ø 3.2 mm (4 uds)
1 x Propeller APC 12x8 Glow/Gas
1 x Allen wheel collar M4x6
1 x FALCON 20X9 CARBON PROPELLER (GAS)
1 x 3-blades 29x12 carbon prop Super Silence
1 x FALCON 27X11 CARBON PROPELLER (GAS)
10,421.06EUR
Manufacturers
Manufacturer Info
Jeti
- Jeti Homepage
- Other products
Notifications
NotificationsNotify me of updates to DUPLEX 2.4EX Central Box 320
Reviews
Write ReviewWrite a review on this product!
Languages
Español English
Currencies
Insurance
multiseguros


Copyright © 2024 ROI Import
Powered by osCommerce