534.01EUR

DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch
[JETCB3202+]

JETI DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch

Product description and features
The Central Box 320 is designed for a complete management of multiple servos and two receiver batteries for a model with high security requirements.The Central Box 320 has an overload protection on each servo output, 8 channels for high-performance servos up to 60 kg / cm and 10 channels for standard servos up to 30 kg / cm. Especially for the use of powerful and power-hungry servos, the Central Box 320 has an aluminum housing for better cooling. The Central Box 320 offers true battery redundancy, DITEX servo telemetry, JETI EX telemetry and up to three receiver inputs (2x 2.4GHz and 1x 900MHz) for full power and RF signal redundancy.

Configuration via JETI Duplex DS/DC transmitters
With JETI Duplex DC/DS transmitters, the full potential of the Central Box 320 can be fully exploited. The device overview of the JETI Duplex DS/DC transmitter makes it easy to perform the entire configuration of the servo outputs, DITEX servo and JETI EX telemetry, function assignment, and more.

Compatibility with Futaba
The Central Box 320 can also be used with two S.Bus receivers (e .g Futaba R7003SB). Setting up and reading out the telemetry values must, however, be realized with a separatly available JETIBOX.

Switching on and off
The switching on and off process of the Central Box 320 is done with the supplied R/C switch.

Recommended receivers
Two compatible RSat2 receivers are included. Optionally, the use of a REX Assist receiver in combination with a RSat2 receiver is possible, so you get a Central Box with gyro stabilization.

Features
Adjustable powerful BEC for voltage stabilization (connection of standard or HV servos)
DITEX servo telemetry support
Possibility to connect up to 3 receivers with serial communication
built-in Expander function with the possibility of independent connection of up to four JETI EX sensors
Input for magnetic switch or RC switch
Power supply batteries connected via MPX connector
100Hz mode of servo outputs (10ms period)
EX telemetry support (measurement of voltage, current, capacity, temperature, etc.)
Easy settings changes via DC/DS transmitter („Device explorer“)
Robust metal construction with mounting holes

temporarily out of stock

Reviews

Quick Find

Shopping Cart

2 x	SE Ring 330 mm (4 pcs)
1 x	Spikes Band (5 m)
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	SE Ring 400 mm (2 pcs)
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	SE Ring 250 mm (2 pcs)
1 x	20x1000 mm Ring Strap Back To Back
2 x	14x60 mm Mini rings Tie Wraps (4 pcs)
2 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Ring 320 mm length (5 pcs)
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x	Tape GFK 38 mm
1 x	Cinta Goldfix 1m
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
2 x	Marker ties (20 pcs)
1 x	20x200 mm battery rings
2 x	PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x	Vacuum pump 12 CFM
2 x	1,5x50 mm allen screwdriver
1 x	Copier 2x20 cm pcs
1 x	Z Bender - S Type Tool
1 x	Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x	Screwdriver for Hexagon 1,5mm
2 x	PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
2 x
2 x	Hexagonal ball head 2.0 x 50 mm
1 x	Crimping tool
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
2 x	2,5x60 mm allen screwdriver
1 x	Starter EM Gear Power 250
2 x	Dust collector for mould cleaning
1 x	Crimping tool
1 x	Starter EM Gear Power 80
2 x	3,0x60 mm allen screwdriver
1 x
1 x	Z Bender - S Type Tool
1 x	Screwdriver for Torx® TX8
2 x	Screwdriver for Hexagon 1,27mm
1 x	Hot Glue Stick RED
1 x	Hot Glue Stick BLACK
1 x	Ball Link Plier
2 x	2,0x50 mm allen screwdriver
1 x	Starter 12v (Max 180 and 30ccm)
1 x	Jeti Black cap
2 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
2 x	Long pinned hinge (12 uds)
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
2 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Flap hinge (6 pcs)
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
2 x	Shirt Hispano Aviación
1 x	Cap Hispano Aviación
1 x	Vest clothes Hispano Aviación
1 x	Para-RC Trike "RC-Bullix"
1 x	Set cintas unión paracaídas 145 cm
1 x	Parachute BACKUP X100
1 x	Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x	Cable coupler M2 (10 uds)
1 x	SE Ring 450 mm (2 pcs)
1 x	Balsa panel 4.0x100x1000 mm
1 x	Cable control set
1 x	Straightened rod Ø 1.2 mm x 1500 mm
3 x	Hot Glue Stick GREEN
2 x	Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs)
2 x	Fresa corte diamante Ø 2.35mm (flame)
2 x	100g Flux Paste for Silver Solder
1 x	Propeller drill jig DA-35/50/60/70
1 x	Beech dowels 3.0 x 1000 mm
1 x	Propeller Pleg CAM-Prop 10x6 + Spinner
1 x	Servo TOPMODEL STANDARD S3217
1 x	Adjustable brass horn threaded M3
2 x	Fresa corte diamante Ø 2.7mm (bola)
1 x	Propeller diller for DLE111 and DA85-150
1 x	Hose clips 6 mm
1 x	MZ-10, 5 Channel HoTT
1 x	40,0 mm hydro-propeller (left hydropropeller)
2 x	Steel brush wheel with 2.35mm
1 x	Fresa corte diamante Ø 1.4mm (bola)
1 x	Distanzstück motor OS 120 AX
1 x	Pistola termica MH 550 micro
2 x	Mini-handed clamp
1 x	Gear for D 54
1 x	Futaba S3010 Servo - Standard BB 0.16s/6.5kg
1 x	Soporte filtro FESTO (4 pcs)
1 x	Support Filtro FESTO
2 x	Digital scale up to 40 kg
1 x	SERVO DES 568 MG
1 x	Rudder 2_Tray 4.5~5 inch
1 x	Digital weight, angle and balance meter BASIC
1 x	Soporte grifo FESTO (2 pcs)
1 x	EC-Cutter
1 x	Futaba S9650/9670SV - Upper Case
1 x	DPSI Micro-DualBat 5.9V / 7.2V MPX-JR
1 x	Battery EMCOTEC LiIon 3000 7.2v
1 x	DPSI RV Mini 5 Magic
1 x	Filter Capacitor JR
1 x	DPSI 2001 RV
1 x	DPSI Micro - DualBat 5.9/7.2 MPX-2xMPX dual
1 x	DPSI Ampere battery backer
1 x	Cut tube
1 x	Starter Sullivan-STAR 601
1 x	15 mm reinforced hinge
1 x	Gates hinge 30x16 mm (2 pcs)
1 x	Long pinned hinge (6 uds)
2 x	Nylon hinge 15x0,3 (10 pcs)
2 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Nylon hinge 20x15x0,3 (10 pcs)
2 x	Pin hinge 26x11 mm (10 uds)
1 x	ROBART POINT HINGE 4,7mm (5 pcs)
1 x	Miniature brass strap hinge, 1 m
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	Micro flex hinge (12 uds)
1 x	Vacuum pump P1-N
1 x	Small pinned hinge (12 uds)
1 x	Gates hinge black 30x16 mm (2 pcs)
1 x	Nylon hinge 20x20x0,3 (10 pcs)
2 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Disposable Injector Bags (30x16cm) 100 pcs
1 x	Small pinned hinge (6 uds)
1 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	Flap hinge 33x9 mm (6 pcs)
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	SE Ring 350 mm (2 pcs)
1 x	Foil for sticking flaps and ailerons
1 x	Tape GFK 25 mm
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	Servo HITEC HS-5625 MG Digi
1 x	Servo HITEC HS-7950TH Ultra Torque HV Coreless Titanium Gear Ser
1 x	Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs)
1 x	PROXXON - DRILL SET 0,5-3,2MM (10PCS.)
1 x	Xoar Electric Beechwood Prop 22x10
1 x	Servo inverter
1 x	Sandpaper file 13 mm
1 x	Sealing Iron Sleeve STD
1 x	9x4.7 * 22x12 carbon propeller
1 x	Carbon servo arms for HITEC HS 65 (4 pcs)
1 x	DPSI RV Mini 5 (2008)
1 x	Vinyl Gloves IDEAL LIGHT, size M , box/ 100 pcs
1 x	Servo Tester
1 x	Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs)
1 x	Xoar Electric Beechwood Prop 20x10
1 x	Goma arrancador Ø36 mm x 30 mm
1 x	25 mm Sandpaper file
1 x	Servo inverter
1 x	Xoar Electric Beechwood Prop 21x10
1 x	PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x	Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs)
1 x	Kwik link unmount tool
1 x	Precision wrench L100 mm
1 x	Xoar Electric Beechwood Prop 16x7
1 x	Xoar Electric Beechwood Prop 15x8
1 x	Xoar Electric Beechwood Prop 12x6
1 x	Sealing Iron Sleeve PROF
1 x	Fresa corte diamante Ø 2.3mm (bola)
1 x	Blades 330mm
1 x	Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x	Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs
1 x	Schul-Malpinsel Gr.5
1 x	Heli digital angle measurer
1 x	HITEC DPC-11 programmer
1 x	Aluminium servo arm (2 uds)
1 x	Servo arms set HS-60/81/85/5082MG/5085mg
1 x	Servo arms set 40/50/55/5055 MG
1 x	Servo DL3017 Digi 17Kg-0.15s/60º
1 x	Servos wing assembly set HS 80/81/82/85
1 x	MIG 29 3D RTF, Servo
1 x	Servo arms set HS-65HB/MG/5065MG
1 x	Metal gear set for HS85MG/5085MG
1 x	25 mm carbon servo arm
1 x	Metal gear set for HS81MG/5082MG
1 x	Screwdriver for Torx® TX6
1 x	DPSI OCP Overload protection
1 x	DPSI Micro SingleBat 5.9V/7.2V magnetic switch
1 x	DPSI magnetic switch actuator (housing)
1 x	EWC6 40 cm wing connector
1 x	DPS Switch JR/JR
1 x	Fuel Dot (RED)
2 x	Fueling valve "Air"
1 x	Tube mounting clamps
1 x	EXTRA NG 74" white/red/blue (Skywing RC)
1 x	JETImodel SINGLE BEC
1 x	Car Charger DC/DS-16
1 x	Combo lighting module with covering drop shape
1 x	SPS 70V 140/280 A
1 x	Seoul Power LED 3 watts PCB Sets: 1x white, 1x red, 1x green
1 x	MPX PCB "4 Pins", 5 pieces
1 x	Interruptor SPS 70v 60/120A
1 x	Motor OS 3820-1200 electric
1 x	Pin type hinge Al 6x98 mm (2 pcs)
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	6 mm M3 variable horn
1 x	Futaba 54 mm servo arm with ball link
1 x	Futaba 20 mm servo arm
1 x	HITEC 17 mm servo arm with ball link HITEC
1 x	Gates hinge
1 x	Servo HITEC HS-85 MG
1 x	89 mm double servo arm with bearing (2 pcs)
1 x	Servo NARO Max Std
1 x	ABS tube 10.0x8.0x1000 mm
1 x	ABS Strip 1.0x4.0x1000 mm
1 x	ABS "T" angle 10.0x10.0x1000 mm
1 x	290 mm 290 mm M5x18 mm shaft ship
1 x	ABS angle 4,0x4,0x1000 mm
1 x	ABS Strip 1.0x2.0x1000 mm
1 x	ABS angle 3,0x3,0x1000 mm
1 x	Combo KAVAN PRO 3536-1000 + RAY 40 SB
1 x	Motor KAVAN PRO 2225-1600
1 x	Program card KAVAN PRO
1 x	Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
1 x	Hand Pads for Tray JETI
1 x	Duplex 2.4 EX TopFuel MTAG Battery Reader
1 x	DUPLEX 2.4EX Central Box 220
1 x	DUPLEX 2.4EX Central Box 320

9,061.20EUR