52.90EUR

DUPLEX 2.4EX MUI 150 Sensor
[HK80001304]

Description:
Voltage and current sensor Jeti MUI150 (up to 150A) for Jeti Duplex system 2.4EX.

Assignment of the MUI EX sensor is measurement of voltage, current, and consumed capacity of flight batteries in the model. The wireless data transmission by the DUPLEX 2,4GHz system is monitored by the JETIBOX terminal.

For communication purposes the Duplex system takes advantage of the 2,4 GHz band which, besides sending remote control data to the model, also receives data from the model back to the transmitter. During a flight, obtained telemetric data are transmitted in real time and the actual values of the measured data can be displayed on the JETIBOX LCD. Telemetric MUI sensors execute voltage and current measurements in your model and transmit these informations with the aid of the DUPLEX system (receivers and transmitter modules). Thanks to exact current measurements these sensors make it possible to trace the spent capacity of the measured battery. The MUI unit is recording the spent current flow time and its average as well as maximum value. Furthermore it offers exact voltage measurements and recordings of voltage minimum and maximum values.

The task of parameter adjustment and measured data setup is performed by the well known talent – the JETIBOX terminal.

MUI sensors allow setting of acoustical signals in order to announce violation of set parameters. Such alarms may be set for measuremets of maximum current and minimum voltage as well as for a maximum of consumed battery capacity. The sound signal is generated by a siren integrated in the transmitter module. For better differentiation the particular alarms are distinguished by Morse alphabetic letters. The acoustical alarm generation in case of parameter violation is working even if the JETIBOX is not connected. With the JETIBOX in place, the LCD display shows which parameter has been violated. In case of violation of several parameters the alerts alter consecutively as well as the indications on the LCD display.

Specificationes:
- Operating Voltage: 5-8.4 V
- Power consumption approx.: 24 mA
- Dimensions approx.: 29x19x11 mm
- Weight approx.: 21 gr
- Voltage measuring range: 0 - 60 V
- Current measuring range: 0 - 150 A
- Accuracy of current/voltage: 1%/0.1%
- Operating temperature: -10 °C - 85 °C

under request

Reviews

Customers who bought this product also purchased

Propeller Pleg CAM Carbon 15x10

under request

Propeller Pleg CAM Carbon 16x13

under request

Quick Find

Shopping Cart

3 x	Brass hexagonal rod Ø 4 mm x 1000 mm
1 x	Straightened rod Ø 4.5 mm x 1000 mm
2 x	Straightened rod Ø 1.2 mm x 1500 mm
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
2 x	Straightened rod Ø 1.5 mm x 1500 mm
1 x	Piloto Jet "Red" 1/6 Scale
2 x	Brass rod Ø 1.5 mm x 1000 mm
1 x	Straightened rod Ø 7.0 mm x 1000 mm
1 x	Civilian pilot "Curt" size 9cm (Slimline)
1 x	Civilian pilot "Gramps" size 9cm (Slimline)
1 x	Straightened rod Ø 2.5 mm x 1000 mm
1 x	1/4 Pilot "Heidi"
2 x	Straightened rod Ø 0.5 mm x 1000 mm
1 x	Pilot "Duke" Legends Series (Slimline)
1 x	Piloto RC Civil 1/5- 1/6 Scale 12"
2 x	Civilian pilot "Pamela" size 9cm (Slimline)
1 x	Brass rod Ø 1.0 mm x 1000 mm
1 x	Pilot "Anthony" (Slimline)
1 x	1/6 Pilot "Cindy"
1 x	Pilot "Adolf" Legends Series (Slimline)
1 x	Militarian pilot "Fly Boy" size 9cm (Slimline)
1 x	Pilot JAN 1/4 Saiplanes
1 x	1/4 Pilot "Mike"
1 x	Pilot "Dick" Legends Series (Slimline)
1 x	Straightened threaded rod M2-1m
1 x	Piloto Jet "Green" 1/6 Scale
1 x	Straightened rod Ø 4.0 mm x 1000 mm
1 x	Piloto JET 1:3,5
1 x	Piloto jet 130 mm
1 x	1/12 Pilot "Fighter"
1 x	1/12 Pilot "Langley"
1 x	1/6 Pilot "Garry"
1 x	1/6 Pilot "Tony"
1 x	Civilian pilot "Joe" size 9cm (Slimline)
1 x	1/12 Pilot "Tom"
2 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
2 x	1/6 Pilot "John"
2 x	7 Servo SET 9g DS MG + Full servo extension cable set for Avanti
2 x	Bungee HLG Premium
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Miniature brass strap hinge, 1 m
1 x	Gates hinge aluminium (1 pcs)
1 x	Micro flex hinge (12 uds)
1 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Gates hinge
1 x	25 mm reinforced hinge
1 x	15 mm reinforced hinge
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Servoholder Dymond DS 1800 MG Digital (2 pcs)
1 x	ABS tube 8.0x7.0x1000 mm
1 x	ABS tube 6.0x5.0x1000 mm
2 x	aluminium servo arm V2-JR 2,0 inch M3
1 x	Red aluminium servo arm V2-Futaba 1,75" inch M3
1 x	Rudder 2_Tray 3~3.5 inch
1 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	ABS tube 5.0x3.0x1000 mm
1 x	Red aluminium servo arm V3-Futaba 3,5inch
1 x	ABS tube 4.0x3.0x1000 mm
1 x	CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x	L-shaped servo mount
1 x	Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x	CF tube set (Ø 38 mm y Ø 14 mm)
1 x	Rudder 2_Tray 4~4.5 inch
2 x	Blue aluminium servo arm V2-Hitec 1,5 inch M3
1 x	Red aluminium servo arm V1-Futaba 23 mm M2
1 x	Red aluminium servo arm V1-Futaba 17 mm M2
1 x	Servo Mount S (red)
1 x	ABS tube 20.0x18.0x1000 mm
1 x	Blue aluminium servo arm V2-Hitec 1,25 inch M3
2 x	Ferrita con funda
1 x	ABS tube 6.0x4.0x1000 mm
2 x	Servo arm with 6 mm hole to FEMA 9800A
2 x	Blue aluminium servo arm V2-Hitec 1,75" inch M3
3 x	Red aluminium servo arm V2-Futaba 1,25" inch M3
2 x	Red aluminium servo arm V1-Futaba 20 mm M2
1 x	ABS tube 10.0x8.0x1000 mm
1 x	ABS tube 9.0x8.0x1000 mm
1 x	Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x	Professional Servo tester
1 x	U Profile ABS 3,0x6,0x1000 mm
1 x	ABS "T" angle 4.0x4.0x1000 mm
1 x	HITEC DPC-11 programmer
1 x	Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x	ABS "T" angle 10.0x10.0x1000 mm
1 x	L-Connector 1.5 mm x 1000 mm
1 x	Profile ABS half cane 2.0x1000 mm
2 x	Cross Connector 4.0 mm x 1000 mm
1 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	U Profile ABS 2,0x4,0x1000 mm
1 x	U Profile ABS 5,0x10,0x1000 mm
1 x	ABS angle 10,0x10,0x1000 mm
1 x	ABS angle 5,0x5,0x1000 mm
1 x	ABS angle 1.5x1.5x1000 mm
1 x	Profile ABS Square 1 x 1000 mm
1 x	Profile ABS half cane 2.5x1000 mm
1 x	Servo inverter
2 x	Streamline Stainless Steel Tubing 11.5x6.5x1000 m
2 x	Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x	ABS angle 4,0x4,0x1000 mm
2 x	Profile ABS Square 2 x 1000 mm
1 x	HPP-21 PLUS PC Programmer for Hitec Digital Servos
1 x	Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x	Profile ABS Square 3 x 1000 mm
1 x	U Profile ABS 8,0x4,0x1000 mm
1 x	Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x	ABS angle 2,0x2,0x1000 mm
1 x	Circlik for shaft 1.2 mm (10 pcs)
1 x	Fibra de vidrio 80 g/m² (2 m x 100 cm)
1 x	Steering arm 16 mm Ø 3 mm
1 x	Hot Glue Stick GREEN
1 x	Threaded coupler M2,5 Ø 3 mm (10 pcs)
2 x	1/10 Pilot "Jimmy"
1 x	Militarian pilot "Kamikaze" size 9cm (Slimline)
2 x	Soporte grifo FESTO vertical (1 pcs)
2 x	Angle support XT60 conector
2 x	Straightened rod Ø 2.0 mm x 1000 mm
3 x	Straightened rod Ø 1.5 mm x 1000 mm
1 x	Servo KST BLS825 V8.0 HV 35Kg 8.4v
1 x	Servo KST X15-1208 V8.0 13.5Kg HV
1 x	Servo KST X20 8.4-50 V8.0 45kg 8.4v Softstar
1 x	Servo KST X20-7512 V8.0 82kg 8.4v
1 x	1/10 Pilot "Jack"
1 x	Pilot "Goose" (Slimline)
1 x	Vasa model Catapult
1 x	Blue aluminium servo arm V1-Hitec 1,0" inch M2
2 x	aluminium servo arm V1-JR 1,0 inch M2
1 x	Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x	Gold aluminium servo arm V2-JR 1,5" inch M3
1 x	Red aluminium servo arm V3-Futaba 1,0inch
1 x	Blue Aluminium double servo arm V3-Hitec 3-3,5inch
1 x	Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
2 x	Red aluminium servo arm V1-Futaba 1,5" inch M3
1 x	Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x	Blue aluminium servo arm V1-Hitec 20 mm M2
1 x	Blue aluminium servo arm V2-Hitec 2,0 inch M3
1 x	Jeti Black cap
1 x	13 mm wing servo holder
1 x	Ferrita 14x8x5.5 mm
2 x	Gold aluminium servo arm V1-JR 1,25" inch M3
2 x	Blue aluminium servo arm V1-Hitec 1,5" inch M3
1 x	Red aluminium servo arm V3-Futaba 3-3,5inch
2 x	Red aluminium servo arm V2-Futaba 17 mm iM2
1 x	Gold aluminium servo arm V2-JR 1,25" inch M3
1 x	Double aluminium servo arm V1-Futaba 2,5 inch M3 (red)
1 x	Blue aluminium servo arm V1-Hitec 1,25" inch M3
1 x	Blue aluminium double servo arm V3-Hitec 3,5inch
1 x	Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
1 x	Blue aluminium servo arm V3-Hitec 1,0inch M3
1 x	Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm)
1 x	Blue aluminium double servo arm HITEC 40 mm M3 F3A
1 x	Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	Profile ABS half cane 6.0x1000 mm
1 x	Servo Tester
1 x	Profile ABS half cane 4x2.5x1000 mm
1 x	L-Connector 4.0 mm x 1000 mm
1 x	Profile ABS half cane 3x1000 mm
1 x	BULLIT Wing 1095 mm
1 x	Aro pasacable Ø25 mm (4 pcs)
1 x	Support Pitot JETI
1 x	Soporte filtro FESTO (4 pcs)
1 x	Sebart 2.2 m YELLOW/BLACK (SebART)
1 x	Sukhoi 29S 2,6 m,CF landing gear(SebART)
1 x	EXTRA 330 LX 2.34m ARF (LX-09) Pilot
2 x	SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm
1 x	Concave-Convex sandpaper file 13 mm
1 x	Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
1 x	Beech dowels 3.0 x 1000 mm
1 x	Distanzstück motor OS 120 AX
1 x	Brass hexagonal rod Ø 3 mm x 1000 mm
1 x	Charger LiPo Charger4
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Brass rod Ø 0.8 mm x 1000 mm
1 x	CARBON CUB FX-3 100-200CC ARF, 165" - 4200 mm (Hangar9)
1 x	Pasacables rectangular 40x15 mm (4 pcs)
1 x	Support Antena 2.4 Ghz (2 pcs)
1 x	Support Filtro FESTO
1 x	Support Flush MPX Conector (6 pcs)
2 x	SLICK 360-A 104" (2640 mm)
1 x	Support ECU Xicoy X-45
1 x	Tapa estado carga XT-60 (6 pcs)
1 x	Soporte grifo FESTO (2 pcs)
1 x	Tube support Ø 6mm (10 pcs)
2 x	EDGE 540-A 105" (2660 mm)
1 x	EDGE 540 1.73m SEAGULL Model
1 x	ULTRA STICK 30 cc ARF
1 x	EDGE 540-A 74" (1880 mm)
1 x	EDGE 540-A 91" (2310 mm)
1 x	EXTRA NG 74" yello/blue/red (Skywing RC)
1 x	ARS 300 91" ARF 2311mm ORANGE
1 x	EXTRA NG 74" white/red/blue (Skywing RC)
1 x	PITTS CHALLENGER 87″ 2.20m (120cc) 02 ARF
1 x	Sukhoi 29S 2,6 m White/Blue (SebART)
1 x	EXTRA 330L 35% hardware pack (Precision Aerobatics)
1 x	ULTRA STICK 10 cc ARF
1 x	PITTS CHALLENGER 87″ 2.20m (120cc) 03 ARF
1 x	Combustible Glow "KAVAN" air/heli 10% nitro
1 x
1 x	60 mm aluminium spinner (Kavan)
1 x	Conector MT-60 (pair)
1 x	Birch plywood plate 600x300x1.5 mm
1 x	Blade holder metal LAMA
1 x	150 mm inflatable superlight deluxe wheel (2 pcs)
1 x	45 mm aluminium spinner (Kavan)
1 x	Birch plywood plate 600x300x2.5 mm
1 x	Combustible Glow "KAVAN" air/heli 5% nitro
1 x	Brazo servo KAVAN doble aluminio 25T - 2.5" M3
1 x	Ciano KAVAN Super Thin 20g
1 x	10 mm aluminium spinner (Kavan)
1 x	Dummy motor GPW Wasp Scale 1/4
1 x	Debonder CA 20g
1 x	Straightened rod Ø 5.5 mm x 1000 mm
1 x	Servo KST A15-1810 20kg/cm@8.4V / Coreless Motor
1 x	Brazo servo aluminio KST 25T-5V2,3515,325,125,135,145X10,X12,A13
1 x	Monokote ROJO misil (1.8x0.65m)
1 x	DUPLEX 2,4EX Switch SAFETY 2-Position Safety DC-16/14
1 x	DUPLEX 2.4EX Expander E2
1 x	Battery RX JETI LiIon RB 3100 7.2v
1 x	Caps multicolor Switch JETI
1 x	DUPLEX 2,4EX Switch SAFETY 2-Position Safety DC-16/14
1 x	Battery RX JETI LiIon RB 2600 7.2v
1 x	DUPLEX 2.4EX MUI 75
1 x	Duplex 2.4EX tray transmitter DC-16 II Black multimode
1 x	DUPLEX 2,4EX Brackets for Transmitter DC/DS
1 x	DSM 10 Dual Switch Mixer
1 x	Ferrita 27x14x7 mm
1 x	U Profile ABS 1,0x2,0x1000 mm
1 x	FOD Screen K45/60/70/85
1 x	Fod Guard 94x34 mm
1 x	Clamp K30 G3
1 x	Battery LiFe -2100/25C-3S 9.9V
1 x	Filter KingTech
1 x	Jet Pipe for ULTIMATUM 2m
1 x	Jet Pipe for ASPIRE 2m JMF
1 x	Monokote BLUE metalizado (1.8x0.65m)
1 x	DUPLEX 2.4EX MU 3 Sensor
1 x	Battery RX JETI LiIon RB 5200 7.2v
1 x	DUPLEX 2.4EX Central Box 220
1 x	DUPLEX 2.4EX Satellite receiver Rsat 2
1 x	DUPLEX 2.4 EX MBar
1 x	DC24 II Transmitter case insert
1 x	DUPLEX 2.4EX MFlow2 Gas 800

29,374.63EUR