398.99EUR

DUPLEX 2.4EX Central Box 320
[JETCB320]

JETI Duplex 2.4EX Central Box 320

Product description and features
The Central Box 320 is designed for a complete management of multiple servos and two receiver batteries for a model with high security requirements. The Central Box 320 has an overload protection on each servo output, 8 channels for high-performance servos up to 60 kg / cm and 10 channels for standard servos up to 30 kg / cm. Especially for the use of powerful and power-hungry servos, the Central Box 320 has an aluminum housing for better cooling. The Central Box 320 offers true battery redundancy, DITEX servo telemetry, JETI EX telemetry and up to three receiver inputs (2x 2.4GHz and 1x 900MHz) for full power and RF signal redundancy.
Configuration via JETI Duplex DS/DC transmitters
With JETI Duplex DC/DS transmitters, the full potential of the Central Box 320 can be fully exploited. The device overview of the JETI Duplex DS/DC transmitter makes it easy to perform the entire configuration of the servo outputs, DITEX servo and JETI EX telemetry, function assignment, and more.

Compatibility with Futaba
The Central Box 320 can also be used with two S.Bus receivers (e .g Futaba R7003SB). Setting up and reading out the telemetry values must, however, be realized with a separatly available JETIBOX.
Switching on and off
The switching on and off process of the Central Box 320 is done with the supplied magnetic switch.
Recommended receivers
As receiver e. g. 2 RSat2 or REX3 receivers can be used. Optionally, the use of a REX Assist receiver in combination with a RSat2 receiver is possible, so you get a Central Box with gyro stabilization.

Features
Adjustable powerful BEC for voltage stabilization (connection of standard or HV servos)
DITEX servo telemetry support
Possibility to connect up to 3 receivers with serial communication
built-in Expander function with the possibility of independent connection of up to four JETI EX sensors
Input for magnetic switch or RC switch
Power supply batteries connected via MPX connector
100Hz mode of servo outputs (10ms period)
EX telemetry support (measurement of voltage, current, capacity, temperature, etc.)
Easy settings changes via DC/DS transmitter („Device explorer“)
Robust metal construction with mounting holes

temporarily out of stock

Reviews

Quick Find

Shopping Cart

1 x	Para-RC Trike "RC-Bullix"
1 x	Paramotor BackPack XXS 2
1 x	Black large kwik link (10 pcs)
1 x	Tube Pitot to PIXHAWK
1 x	Pasacables rectangular 40x15 mm (4 pcs)
1 x	Straightened rod Ø 8.0 mm x 1000 mm
1 x	4 mm M3 red control terminal (4 pcs)
1 x	Socket head ball link M3 (2 uds)
1 x	1 m servo "Premium" wire (white/red/blue)
1 x	25 mm reinforced hinge
1 x	Black smoke bombs AX-60 (5 pcs)
1 x	Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
2 x	SERVO HOLDER
1 x	Pin hinge 39x20 mm (10 uds)
2 x	Round Rod 3,0x1000 mm
2 x	Round Rod 5,0x1000 mm
1 x	10 mm Quick clamp_L (6 pcs)
1 x	Conexion PREMIUM MAXI fuselaje/alas 200 cm one4one
1 x	ABS tube 5.0x3.0x1000 mm
1 x	10m servo "Premium" wire (white/red/blue)
1 x	ABS tube 8.0x7.0x1000 mm
1 x	Blue metalic ball link M3/3 azul (2 pcs)
1 x	M2/M1/6 3Diam long black ball link V1 (2 pcs)
1 x	Long ball link M2 (6 uds)
1 x	Miniature brass strap hinge, 1 m
1 x	Extension lead 15 cm Multiplex
1 x	ABS tube 18.0x16.0x1000 mm
1 x	Extension 30 cm (Futaba)
1 x	Protective Cover for wires Ø 10 mm 1000 mm
1 x	200 mm extensión servo HITEC/JR
1 x	Long pinned hinge (12 uds)
1 x	Extension 90 cm (Futaba)
1 x	Ventus 1:4 set of instruments
2 x	Fixed launching hook
1 x	Flap hinge (6 pcs)
1 x	PCARD Wireless System
1 x	Extension silicon 10 cm (Futaba)
2 x	Carbon fiber rod 5.0 mmx1000 mm
1 x	30 cm MULTIPLEX female connector
1 x	Conector XT-30 (macho)
1 x	Conector AS150 7mm antichispazo (Set: 2 pares)
1 x	Balsa panel 2.5x100x1000 mm
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x	2 LiPo XH>EH adapter
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	DPSI magnetic switch actuator (housing)
2 x	ABS 500 x 400 x 1,5 mm (white)
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 50m
1 x	CC 05
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x	Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x	Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	DPSI Ampere battery backer
2 x	Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x	5 LiPo XH>EH adapter
1 x	CC 02
2 x
1 x	Compact on-board starting system (9525)
1 x	Recess mount-rem. glow plug set
1 x	Selfstarr EME35
1 x	GLOW 9C + accesories
1 x	GLOW 2C + accesories
1 x	Opto Gas Engine Kill Switch
1 x	Ignition bed V2 Red color
1 x	Coversion set HIROBO EX/EAGLE elektro
1 x	La Capitania di Venetia 1:50
1 x	Tirpiz Battleship 1:200
2 x	Round Rod 4,0x1000 mm
1 x	ABS Strip 1.5x8.0x1000 mm
1 x	LOWER TOW HOOK
1 x	LED wire (blue - 2pcs)
2 x	LED blink wire flashing (orange - 2pcs)
1 x	Baseplate servo
1 x	RX cabel
1 x	ABS Strip 1.0x2.0x1000 mm
1 x	Round Rod 1,25x1000 mm
1 x	ABS Strip 1.5x6.0x1000 mm
1 x	ABS Strip 1.5x2.0x1000 mm
1 x	Round Rod 6,0x1000 mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	Modulo telemetria 500 mW/100 mw Radio aire/Tierra Modulo 915 MHz
2 x	Towing hook <3m
2 x	Strip 2,0x2,0x330 mm
2 x	Strip 3,5x1,75x330 mm
2 x	ABS Strip 1.5x4.0x1000 mm
1 x	RX external cable for estandar receivers
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Carbon fiber flat 1000x3.0x0.13 mm
1 x	Gens Ace 25C 1200mAh 3S1P 11.1V Saddle Airsoft Gun Lipo Battery
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	LED wire (green - 2pcs)
1 x	Carbon fiber flat 1000x6.0x0.8 mm
1 x	LED lighting system High Power
1 x	Carbon fiber rod 16 mm x 1000 mm
1 x	Carbon fiber rod 20 mmx1000 mm
1 x	Carbon fiber rod 0.8 mmx1000 mm
1 x	Carbon fiber flat 1000x3.0x0.5 mm
1 x	LED blink wire flashing (green - 2pcs)
1 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x	LED blink wire flashing (red - 2pcs)
1 x	Carbon fiber rod 8.0 mmx1000 mm
1 x	ED Position Lights wireless (Set of 3)
1 x	Carbon fiber rod 4.0 mmx1000 mm
1 x	LED blink wire flashing (blue - 2pcs)
1 x	LED wire (rojo - 2pcs)
1 x	Squared carbon wing joinner 5x5x220 mm
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Carbon fiber rod 12 mm x 1000 mm
1 x	Carbon fiber rod 6.0 mmx1000 mm
1 x	GPS, Vario and altitude Sensor SBS-01G
1 x	ABS Strip 1.0x3.0x1000 mm
1 x	Strip 1,5x1,5x330 mm
1 x	ABS Strip 1.0x4.0x1000 mm
1 x	Strip ABS 2.0x8.0x1000 mm
1 x	Round Rod 1,0x1000 mm
1 x	Strip ABS 2.0x3.0x1000 mm
1 x	ABS I Strip 20x10x1000 mm
1 x	Round Rod 1,5x1000 mm
1 x	Strip ABS 2.0x5.0x1000 mm
1 x	Pegamento Pu R 50g polyuretano
1 x	FOAM - CURE™ (24g)
1 x	ARAMID honeycomb 1300x2600x2 mm
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	Cierva C30 spanish decoration Stickers
1 x	Buy Perforated film 100 cm / 20 m
1 x	Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm
1 x	Complet landing gear
1 x	LA500 ciclic lever
1 x	Head upper part
1 x	USB Interface REVOLECTRIX for CellPRO 10s
1 x	SWTU2 switch
1 x	wing/fuselage connector for 6 pines AWG 20-24 (without pines)
1 x	SBEC 40
1 x	SBEC Jeti
1 x	USB HLS prog. interface
1 x	Opto Gas Engine Kill Switch
1 x	PowerBox SparkSwitch RS
1 x	Crimping tool
1 x
1 x	EC-Cutter
1 x	ABS Strip 1.0x5.0x1000 mm
1 x	Strip ABS 2.0x10.0x1000 mm
1 x	Battery RX JETI LiIon RB 5200 7.2v

7,334.50EUR