52.90EUR

DUPLEX 2.4EX MUI 150 Sensor
[HK80001304]

Description:
Voltage and current sensor Jeti MUI150 (up to 150A) for Jeti Duplex system 2.4EX.

Assignment of the MUI EX sensor is measurement of voltage, current, and consumed capacity of flight batteries in the model. The wireless data transmission by the DUPLEX 2,4GHz system is monitored by the JETIBOX terminal.

For communication purposes the Duplex system takes advantage of the 2,4 GHz band which, besides sending remote control data to the model, also receives data from the model back to the transmitter. During a flight, obtained telemetric data are transmitted in real time and the actual values of the measured data can be displayed on the JETIBOX LCD. Telemetric MUI sensors execute voltage and current measurements in your model and transmit these informations with the aid of the DUPLEX system (receivers and transmitter modules). Thanks to exact current measurements these sensors make it possible to trace the spent capacity of the measured battery. The MUI unit is recording the spent current flow time and its average as well as maximum value. Furthermore it offers exact voltage measurements and recordings of voltage minimum and maximum values.

The task of parameter adjustment and measured data setup is performed by the well known talent – the JETIBOX terminal.

MUI sensors allow setting of acoustical signals in order to announce violation of set parameters. Such alarms may be set for measuremets of maximum current and minimum voltage as well as for a maximum of consumed battery capacity. The sound signal is generated by a siren integrated in the transmitter module. For better differentiation the particular alarms are distinguished by Morse alphabetic letters. The acoustical alarm generation in case of parameter violation is working even if the JETIBOX is not connected. With the JETIBOX in place, the LCD display shows which parameter has been violated. In case of violation of several parameters the alerts alter consecutively as well as the indications on the LCD display.

Specificationes:
- Operating Voltage: 5-8.4 V
- Power consumption approx.: 24 mA
- Dimensions approx.: 29x19x11 mm
- Weight approx.: 21 gr
- Voltage measuring range: 0 - 60 V
- Current measuring range: 0 - 150 A
- Accuracy of current/voltage: 1%/0.1%
- Operating temperature: -10 °C - 85 °C

under request

Reviews

Customers who bought this product also purchased

Propeller Pleg CAM Carbon 15x10

under request

Propeller Pleg CAM Carbon 16x13

under request

Quick Find

Shopping Cart

2 x	Motor DLE 200cc Std
2 x	Motor DLE 430 cc - Paramotors
2 x	Silent-blocks DLE 170M
1 x	Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x	ABS tube 20.0x18.0x1000 mm
1 x	Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x	ABS tube 8.0x7.0x1000 mm
1 x	Thinwall Stainless Steel Tubing 28x0.6x1000 mm
2 x	ABS tube 5.0x3.0x1000 mm
2 x	ABS tube 16.0x14.0x1000 mm
1 x	Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
1 x	ABS tube 6.0x4.0x1000 mm
1 x	Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	CF tube set (Ø 38 mm y Ø 14 mm)
1 x	ABS tube 18.0x16.0x1000 mm
1 x	ABS tube 5.0x4.0x1000 mm
1 x	ABS tube 6.0x5.0x1000 mm
1 x	Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x	ABS tube 14.0x10.0x1000 mm
1 x	ABS tube 12.0x10.0x1000 mm
1 x	ABS tube 3.0x2.0x1000 mm
1 x	ABS tube 9.0x7.0x1000 mm
1 x	Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x	ABS tube 4.0x2.0x1000 mm
1 x	CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x	Plasti Dip Liquid Tape 429 ml black
1 x	Nitroverdu 500 ml
1 x	Spray adhesive INFUTAC (Clear) 500 ml
2 x	Spray Graphit 33
1 x	Universal Colour Paste signal white (RAL 9003) 1 Kg
1 x	Hobbylite Filler, Balsa colour
1 x	Partall paste 650 g
2 x	SE Ring 360 mm (2 pcs)
1 x	Connectors banna oro 4 mm (M/F)
1 x	Connectors banna oro 6,0 mm (M/F)
2 x	Conector BEC male (10 pcs)
1 x	Cinta Goldfix 1m
3 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x	SE Ring 400 mm (2 pcs)
3 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
2 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	Gold antispark 4 mm plug
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	2 mm male connector (2 pcs) with safety connector
2 x	Tape GFK 25 mm
3 x	SE Ring 480 mm (2 pcs)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
2 x	30 cm DEANS female connector
1 x	Banna gold connector 2,5 mm (100 M/F pairs)
1 x	Wing connector 8pin with pin strip, plug & socket
3 x	XH male balance (4S) connector (2 pcs)
2 x	XH female balance (4S) connector (2 pcs)
2 x	Connectors banna oro 2 mm (M/F)
2 x	Connectors banna gold 5,5 mm (M/F)
2 x	Connectors banna oro 3,5 mm (M/F)
1 x	SE Ring 350 mm (2 pcs)
3 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	SE Ring 450 mm (2 pcs)
2 x	Ring 320 mm length (5 pcs)
1 x	2 mm female connector (2 pcs) with safety connector
1 x	Connectors banna oro 3 mm (M/F)
3 x	Marker ties (20 pcs)
2 x	XH female balance (2S) connector (2 pcs)
2 x	XH female balance (5S) connector (2 pcs)
1 x	XH male balance (3S) connector (2 pcs)
1 x	MPX Sub-D Adaptor
1 x	Conector BEC female (10 pcs)
2 x	Connectors banna oro 8,0 mm (M/F)
2 x	Optotronix Aurora Plug
2 x	Connectors banna oro 8,0 mm 5 pcs(Female)
2 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x
2 x	Connectors DEANS (T)
2 x	XH male balance (5S) connector (2 pcs)
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	Disposable Injector Bags (30x16cm) 100 pcs
1 x	ABS angle 4,0x4,0x1000 mm
1 x	ABS angle 10,0x10,0x1000 mm
1 x
1 x	Oracover Black 2 m
1 x	3,2x1000 mm 2:1 red termoretract tube
1 x	Para-RC Trike "RC-Bullix"
1 x	Gens Ace 25C 1200mAh 3S1P 11.1V Saddle Airsoft Gun Lipo Battery
1 x	ABS tube 10.0x8.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm)
1 x	Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm)
1 x	Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	20x1000 mm Ring Strap Back To Back
1 x	Banna gold connector 2,5 mm (M/F)
1 x	ABS tube 7.0x5.0x1000 mm
2 x	Motor DLE 200cc Premium Muffler
2 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	SE Ring 200 mm (2 pcs)
2 x	XT-60 connector (male)
1 x	Tape GFK 50 mm
2 x	SE Ring 330 mm (4 pcs)
1 x	Brazo Servo XTorque 52 mm HITEC 25T-6
1 x	Futaba 20 mm servo arm
1 x	Soporte carbono MR30 (2 pcs)
1 x	Painting GHT Lexan Black 150 ml
1 x	Horns set HS-65HB/MG, 5065MG
1 x	Plasti Dip Liquid Tape 429 ml orange
2 x	SE Ring 240 mm (2 pcs)
1 x	Servos security connector (2 pcs)
1 x	Hitec 52 mm servo arm
1 x	Servo arms set 40/50/55/5055 MG
1 x	XTorque CFK Servohebel 38
1 x	Hitec 38 mm servo arm with ball link
1 x	Servo BLS-M55B 61.2kg
1 x	Universal Colour Paste deep black 50 g
1 x	SUPER STRANGTH SERVO ARMS FUTABA LONG (8 PCS)
1 x	Futaba 30 mm servo arm with M3 ball link
2 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	Birch plywood plate 600x300x4.0 mm
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Pine wood slat 6.0x6.0x1000 mm
1 x	Birch plywood plate 600x300x1.2 mm
1 x	Beech dowels 4.0 x 1000 mm
1 x	Liston HAYA 3 x 10 x 1000 mm
1 x	Lite Plywood panel 600x300x3.0 mm
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	Pine wood slat 3.0x10.0x1000 mm
1 x	Connectors banna oro 0,8 mm (M/F)
1 x	Connectors DEANS (T) micro
1 x	XH female balance (7S) connector (2 pcs)
1 x	Spikes Band (5 m)
1 x	Conector Servo female 4 pines
1 x	Adapter rotula M3
1 x	Tape GFK 38 mm
1 x	Solvent Plasti Dip 1000 ml
1 x	Horizontal mounting servo holder
1 x	17 mm servo arm with ball link DES Graupner
1 x	Mounting frame MPX female connector
2 x	Connector CAN 15
1 x	Propeller POWER-PROP 7x7
1 x	Bag connector 2 mm
2 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	Foil for sticking flaps and ailerons
1 x	Conector XT-30 (macho)
1 x	Connectors banana oro 6,0 mm Ultralight (M/F)
1 x	XH female balance (9S) connector (2 pcs)
1 x	Futaba 2x20 mm servo double arm
1 x	MPX Support (2 pcs)
1 x	PARTALL® Hi-Temp Wax, 340 g
1 x	Servo ROBBE FS-31 Pico Servo
1 x	Red 4 mm connector holder
1 x	Universal Colour Paste white 50 g
1 x	FUTABA 20 mm servo arm with ball link
1 x	Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
1 x	10-15mm Servo Arm
1 x	Carbon servo arms for HITEC HS 65 (4 pcs)
1 x	Futaba 25 mm servo arm with M3 ball link
1 x	Connectors DEANS 4 pins (1 pair)
1 x	HITEC 20 mm servo arm with ball link
1 x	SE Ring 250 mm (2 pcs)
1 x	Extension 90 cm (Futaba)
1 x	Cable S.BUS 3 salidas 100 mm
1 x	Cable S.BUS 3 salidas 300 mm
1 x	Cable silicona macho batt. receptor 30 cm (Graupner)
1 x	Cable silicona macho batt. receptor 30 cm (Futaba)
1 x	Extension silicon 50 cm (Graupner)
1 x	Big Crow DLE-170M
1 x	FOD guard for VT80BL, M90, M100K, M100XBL, M140K, M140XBL and M
1 x	Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x	Sanyo TX Battery Eneloop 9,6 V Futaba
1 x	Propeller FALCON 32,5x11 PUSHER Carbono
1 x	Turbina JetsMunt M166TS
1 x	Turbina JetsMunt VT98 NG
1 x	Turbina JetsMunt M122 NG
1 x	Turbina JetsMunt M210TS
1 x	DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch
1 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x	DUPLEX 2.4EX Expander E4
1 x	JETImodel SINGLE BEC
1 x	Neck strap JETI DC
1 x	AddCAP 10AS capacitors
1 x	DUPLEX 2.4EX Central Box 220
1 x	Neck strap JETI DS
1 x	Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m)
1 x	DUPLEX 2.4EX Expander E2
1 x	DUPLEX 2,4GHz MRPM EX
1 x	DUPLEX 2.4EX RC Power Switch 10

34,783.20EUR