534.01EUR

DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch
[JETCB3202+]

JETI DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch

Product description and features
The Central Box 320 is designed for a complete management of multiple servos and two receiver batteries for a model with high security requirements.The Central Box 320 has an overload protection on each servo output, 8 channels for high-performance servos up to 60 kg / cm and 10 channels for standard servos up to 30 kg / cm. Especially for the use of powerful and power-hungry servos, the Central Box 320 has an aluminum housing for better cooling. The Central Box 320 offers true battery redundancy, DITEX servo telemetry, JETI EX telemetry and up to three receiver inputs (2x 2.4GHz and 1x 900MHz) for full power and RF signal redundancy.

Configuration via JETI Duplex DS/DC transmitters
With JETI Duplex DC/DS transmitters, the full potential of the Central Box 320 can be fully exploited. The device overview of the JETI Duplex DS/DC transmitter makes it easy to perform the entire configuration of the servo outputs, DITEX servo and JETI EX telemetry, function assignment, and more.

Compatibility with Futaba
The Central Box 320 can also be used with two S.Bus receivers (e .g Futaba R7003SB). Setting up and reading out the telemetry values must, however, be realized with a separatly available JETIBOX.

Switching on and off
The switching on and off process of the Central Box 320 is done with the supplied R/C switch.

Recommended receivers
Two compatible RSat2 receivers are included. Optionally, the use of a REX Assist receiver in combination with a RSat2 receiver is possible, so you get a Central Box with gyro stabilization.

Features
Adjustable powerful BEC for voltage stabilization (connection of standard or HV servos)
DITEX servo telemetry support
Possibility to connect up to 3 receivers with serial communication
built-in Expander function with the possibility of independent connection of up to four JETI EX sensors
Input for magnetic switch or RC switch
Power supply batteries connected via MPX connector
100Hz mode of servo outputs (10ms period)
EX telemetry support (measurement of voltage, current, capacity, temperature, etc.)
Easy settings changes via DC/DS transmitter („Device explorer“)
Robust metal construction with mounting holes

temporarily out of stock

Reviews

Quick Find

Shopping Cart

3 x	Civilian pilot "Joe" size 9cm (Slimline)
1 x	1/10 Pilot "Jack"
2 x	1/6 Pilot "Buddy"
2 x	1/6 Pilot "Tony"
1 x	Pilot "Goose" (Slimline)
2 x	Pilot "Dick" Legends Series (Slimline)
1 x	1/7 Pilot "Japanese"
2 x	1/12 Pilot "Cougar"
2 x	Militarian pilot "Fly Boy" size 9cm (Slimline)
2 x	Civilian pilot "G-Man" size 9cm (Slimline)
2 x	1/4 Pilot "Mike"
1 x	1/6 Pilot "Garry"
1 x	1/6 Pilot "Cindy"
1 x	Piloto Jet "Red" 1/6 Scale
2 x	1/6 Pilot "John"
2 x	1/10 Pilot "Jimmy"
1 x	Pilot "Adolf" Legends Series (Slimline)
1 x	Civilian pilot "Pamela" size 9cm (Slimline)
2 x	Civilian pilot "Curt" size 9cm (Slimline)
1 x	Militarian pilot "Kamikaze" size 9cm (Slimline)
3 x	Pilot JAN 1/4 Saiplanes
2 x	Civilian pilot "Gramps" size 9cm (Slimline)
1 x	ABS I Strip 20x10x1000 mm
1 x	Carbon fiber flat 1000x3.0x0.13 mm
2 x	Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x	ABS Strip 1.5x6.0x1000 mm
2 x	Carbon fiber rod 14 mmx1000 mm
1 x	Round Rod 2,0x1000 mm
1 x	ABS Strip 1.0x3.0x1000 mm
1 x	Carbon fiber rod 1.0 mm x 1000 mm
1 x	ABS Strip 1.0x5.0x1000 mm
2 x	Strip 3,5x1,75x330 mm
1 x	Round Rod 3,0x1000 mm
1 x	Strip ABS 2.0x5.0x1000 mm
1 x	Carbon fiber rod 2.0 mmx1000 mm
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Carbon fiber rod 0.8 mmx1000 mm
2 x	ABS I Strip 10x5x1000 mm
1 x	Carbon fiber rod 20 mmx1000 mm
2 x	ABS Strip 1.5x8.0x1000 mm
1 x	Strip ABS 2.0x8.0x1000 mm
1 x	Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
2 x	Round Rod 1,0x1000 mm
1 x	Strip ABS 2.0x10.0x1000 mm
2 x	Carbon fiber rod 7.0 mmx1000 mm
1 x	Squared carbon wing joinner 5x5x220 mm
1 x	Carbon fiber rod 2.5 mmx1000 mm
1 x	Strip 1,5x1,5x330 mm
2 x	Carbon fiber flat 1000x3.0x1.0 mm
2 x	ABS Strip 1.5x4.0x1000 mm
2 x	Strip ABS 2.0x3.0x1000 mm
2 x	ABS Strip 1.5x2.0x1000 mm
2 x	ABS Strip 1.0x4.0x1000 mm
1 x	Round Rod 1,25x1000 mm
2 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	Carbon fiber rod 5.0 mmx1000 mm
1 x	Carbon fiber rod 4.0 mmx1000 mm
2 x	BALSA triangular 6x6x1000 mm
1 x	A/C quality beech plywood 600x300x5.0 mm
1 x	1/12 Pilot "Fighter"
1 x	Piloto JET 1:3,5
1 x	Balsa panel 8.0x100x1000 mm
1 x	Balsa panel 4.0x100x1000 mm
1 x	Balsa panel 10x100x1000 mm
2 x	BALSA triangular 15x15x1000 mm
1 x	BALSA leading edge 8x10x1000 mm
1 x	Balsa panel 1.5x100x1000 mm
1 x	1/12 Pilot "Tom"
1 x	1/4 Pilot "Heidi"
1 x	A/C quality beech plywood 600x300x0.6 mm
1 x	Beech dowels 10 mm x 1000 mm
1 x	Piloto Jet "Green" 1/6 Scale
1 x	A/C quality beech plywood 600x300x5.0 mm
1 x	BALSA trip 8.0x8.0x1000 mm
1 x	CM-3
1 x	Straightened rod Ø 6.0 mm x 1000 mm
1 x	Parachutist
1 x	Red smoke canister 100 g
1 x	Piloto RC Civil 1/5- 1/6 Scale 12"
1 x	USB Mini Camera endoscope
1 x	18m Fitting barb
1 x	Pilot "Anthony" (Slimline)
1 x	Soporte grifo FESTO vertical (1 pcs)
1 x	Recessed MPX connector support (6 pcs)
1 x	Actuador lineal HLS12-100210-7.4v
1 x	Cap Hispano Aviación
1 x	Jeti Advance Plus Program Card
1 x	Carbon fiber flat 1000x3.0x0.5 mm
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Strip 2,5x1,25x330 mm
1 x	Carbon fiber rod 10 mm x 1000 mm
1 x	Carbon fiber rod 16 mm x 1000 mm
1 x	Round Rod 6,0x1000 mm
1 x	ABS Strip 1.5x3.0x1000 mm
1 x	Hacker X-Pro USB interface V2
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Carbon fiber flat 1000x6.0x0.8 mm
1 x	BALSA triangular 8x8x1000 mm
1 x	Silent-blocks DLE 170M
1 x	Pine wood slat 6.0x6.0x1000 mm
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	LED blink wire flashing (white - 2pcs)
1 x	LED wire (blue - 2pcs)
1 x	ED Position Lights wireless (Set of 3)
1 x	LED blink wire flashing (green - 2pcs)
1 x	Ball link V1 Ø7 M4/3 (6 uds)
1 x	Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x	Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x	Cable coupler M2x66 (2 uds)
1 x	Crimping sleeves for 1.1 mm cable (10 pcs)
1 x	Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Cable coupler M3 (10 uds)
1 x	Propeller Pleg CAM Carbon 16x13
1 x	89x32 mm (3.5") axle Ø5 mm aluminium core wheel
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x	Propeller Pleg CAM Carbon 12.5x7.5
1 x	Propeller Pleg CAM Carbon 14x9
1 x	Propeller Pleg CAM Carbon 10.5x6
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	Motor DLE 170 M- Paramotors
1 x	Pilot "Duke" Legends Series (Slimline)
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	Mahogany wood slat 1.5x1.5x1000 mm
1 x	BALSA trip 10x10x1000 mm
1 x	Walnut wood slat 3.0x3.0x1000 mm
1 x	Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x	FIALA Propeller 23x8 Electric
1 x	DUPLEX 2.4 EX MBar
1 x	Battery RX JETI LiIon RB 3100 7.2v
1 x	Propeller FIALA 15x8 3-Blade
1 x	Motor OS 81 FS 4T
1 x	Winter-Glove DS tx
1 x	OS 37 SZ-H, Connecting rod

4,783.93EUR