398.99EUR

DUPLEX 2.4EX Central Box 320
[JETCB320]

JETI Duplex 2.4EX Central Box 320

Product description and features
The Central Box 320 is designed for a complete management of multiple servos and two receiver batteries for a model with high security requirements. The Central Box 320 has an overload protection on each servo output, 8 channels for high-performance servos up to 60 kg / cm and 10 channels for standard servos up to 30 kg / cm. Especially for the use of powerful and power-hungry servos, the Central Box 320 has an aluminum housing for better cooling. The Central Box 320 offers true battery redundancy, DITEX servo telemetry, JETI EX telemetry and up to three receiver inputs (2x 2.4GHz and 1x 900MHz) for full power and RF signal redundancy.
Configuration via JETI Duplex DS/DC transmitters
With JETI Duplex DC/DS transmitters, the full potential of the Central Box 320 can be fully exploited. The device overview of the JETI Duplex DS/DC transmitter makes it easy to perform the entire configuration of the servo outputs, DITEX servo and JETI EX telemetry, function assignment, and more.

Compatibility with Futaba
The Central Box 320 can also be used with two S.Bus receivers (e .g Futaba R7003SB). Setting up and reading out the telemetry values must, however, be realized with a separatly available JETIBOX.
Switching on and off
The switching on and off process of the Central Box 320 is done with the supplied magnetic switch.
Recommended receivers
As receiver e. g. 2 RSat2 or REX3 receivers can be used. Optionally, the use of a REX Assist receiver in combination with a RSat2 receiver is possible, so you get a Central Box with gyro stabilization.

Features
Adjustable powerful BEC for voltage stabilization (connection of standard or HV servos)
DITEX servo telemetry support
Possibility to connect up to 3 receivers with serial communication
built-in Expander function with the possibility of independent connection of up to four JETI EX sensors
Input for magnetic switch or RC switch
Power supply batteries connected via MPX connector
100Hz mode of servo outputs (10ms period)
EX telemetry support (measurement of voltage, current, capacity, temperature, etc.)
Easy settings changes via DC/DS transmitter („Device explorer“)
Robust metal construction with mounting holes

temporalmente fuera de stock

Comentarios

Búsqueda Rápida

Cesta de Compras

1 x	Aerofly Professional Expansion Pack Vol. 1 PC-DVD
1 x	Funda anticalorica de fibra de vidrio Ø 4 mm 1000 mm
1 x	Conector banana oro 4 mm (Ultralight)
1 x	Listón de BALSA 5,0x5,0x1000 mm
1 x	Conector banana oro 3 mm
1 x	Plancha de balsa 5,0x100x1000 mm
1 x	Perfil goma 6-2 mm 2M
1 x	Perfil de ABS cuadrado 3 x 1000 mm
1 x	Prisionero aluminio 3 mm Ø (4 uds)
1 x	Conector ABS "H" 4.0 mm x 1000 mm
1 x	Funda Protectora espiral negra cables Ø 0,5/50 mm - 25 m
1 x	Tornillo M4x0,7x20 mm Cabeza Plana alum. anodizado lila (4 pcs)
1 x	Piloto 1/6 "Garry"
1 x	Tuerca autoempotrable M3 (4 pcs)
1 x	Cartuchos de humo AX-3 blanco (10 pcs)
1 x	Switch 3 posiciones DC TX DUPLEX con muelle UP
1 x	Horn de mando carbono 20 mm
1 x	Tuerca autoempotrable M4 (10 pcs)
1 x	Taco goma 11 mm (14 pcs)
1 x	Piloto 1/12 "Tom"
1 x	Piloto Jet "Green" 1/6 Scale
1 x	Arandela conica alumino M4 verde (8 pcs)
1 x	Bungee HLG Premium
1 x	Perfil de ABS triangular 4.0x1000 mm 90º
1 x	Set de Humo "Planeador"
1 x	Stick largo JETI DC/DS (2 pcs)
1 x	Horn largo de latón M2 para cable (2 pcs)
1 x	Conector banana oro 2 mm
1 x	Piloto "Adolf" Legends Series(Slimline)
1 x	Conjunto bieleta 100 mm y rótulas T. para dirección
1 x	Bayoneta aluminio/strongal D25 mm/1 m
1 x	Bisagra pin 26x11 mm (10 uds)
1 x	Listón de BALSA 4,0x4,0x1000 mm
1 x	Arandela conica alumino M4 rojo (8 pcs)
1 x	Conector BEC hembra (10 pcs)
1 x	Plancha contrachapado Abedul 600x300x1,5 mm
1 x	Conector FUTABA Servo macho BLUE silicon (10 pcs)
1 x	Plancha contrachapado Abedul 600x300x5,0 mm
1 x	Cartuchos de humo AX-60 rojo (5 pcs)
1 x	Kit de montaje "S" para barco
1 x	Bisagra de nylon 20x20x0,3 (10 pcs)
1 x	Plancha de balsa 2,5x100x1000 mm
1 x	Perfil de ABS triangular 4.0x1000 mm 60º
1 x	Pegatinas números para marcar
1 x	Perfil de ABS "T" 2.0x2.0x1000 mm
1 x	Bisagra correa de latón en miniatura 1m
1 x	Piloto 1/10 "Jimmy"
1 x	Plancha de balsa 8,0x100x1000 mm
1 x	Tornillo M4x0,7x20 mm Cabeza Botón alum. anodizado azul oscuro(4
1 x	Cable silicona 0,25 mm² negro (25 m)
1 x	Almohadillas pupitre JETI
1 x	Plancha de balsa 1,5x100x1000 mm
1 x	Cartuchos de humo AX-18 blanco (5 pcs)
1 x	Bisagra de Flaps (6 uds)
1 x	Prisionero aluminio 2.5 mm Ø (4 uds)
1 x	Mini Clips para fijar Ala (2 pcs)
1 x	Stick DUPLEX con potenciómetro para DC/DS
1 x	Listón de BALSA 3,0x3,0x1000 mm
1 x	Iniciadores para AX-60 (5 pcs)
1 x	Arandela conica alumino M3 negro (8 pcs)
1 x	Horn mando long (2 pcs)
1 x	Funda Protectora cables Ø 10 mm 1000 mm
1 x	Plancha de balsa 3,0x100x1000 mm
1 x	Conector DEANS hembra 30 cm
1 x	Bisagra de Flaps 33x9 mm (6 uds)
1 x	Piloto WWII US Navy Pacific 12" Sclae 1/6-1/5
1 x	Horn corto de latón M3 para cable (2 pcs)
1 x	Tornillo Servos M4x5/8 aluminio anodizado plata (4 pcs)
1 x	Horn micro type4 Ø 0,5(2 pcs)
1 x	Bisagra de nylon flaps 33x9 (2 pcs)
1 x	Horn DUBRO 1/2A
1 x	Tuerca autoempotrable M6 (4 pcs)
1 x	Cartucho de humo Blanco 65 g
1 x	Bisagra cilíndrica 48 mm Ø 2,5 mm (5 pcs)
1 x	Bisagra de compuerta/Flaps
1 x	Power Switch RCPS5 - 5 Amp.
1 x	Tornillos carcasa JETI DS14/16/24 (8 pcs)
1 x	Interruptor SAFETY dos posiciones DS-16/14
1 x	Bisagra de nylon flaps/compuertas 27x10,5 (2 pcs)
1 x	Tuerca autoempotrable M5 (4 pcs)
1 x	Arandela conica alumino M3 azul (8 pcs)
1 x	Switch 3 posiciones DC TX DUPLEX con muelle DOWN
1 x	Correa JETI DS
1 x	Extension MPX-MPX 20 cm
1 x	Conexion PREMIUM fuselaje/alas para 3 servos SUB-D 160 cm
1 x	Cable silicona 0,25 mm2 verde (100 m)
1 x	Liston de BALSA 10 x 10 x 1000 mm
1 x	Horn de mando 6/20 con rótula M3
1 x	Plancha contrachapado Abedul 600x300x0,6 mm
1 x	Liston de BALSA 8,0x8,0x1000 mm
1 x	Piloto 1/6 "Buddy"
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Stick DUPLEX con interruptor 3 posiciones para DC/DS
1 x	PPM to Jack link - Tx Black (mono) DC/DS Tx DUPLEX 2,4EX
1 x	Set de Humo "M"
1 x	Conector banana oro 6,0 mm Ultralight (pareja)
1 x	Bisagra de nylon 20x15x0,3 (10 pcs)
1 x	Horn de mando 6/35 con rótula M3
1 x	Brazos para emisora Jeti DC/DS
1 x	Guías externas para antena de 2,4 GHz negras (2 pcs)
1 x	Horn aluminio roscado 6 mm con rótula
1 x	Cartucho de humo Blanco 100 g
1 x	Cable servo PREMIUM 50m (blanco/rojo/azul)
1 x	Interruptor 3 posiciones "largo" JETI DC
1 x	Bayoneta aluminio ø30×1 mm x 1m
1 x	Conector FUTABA Servo macho (10 pcs)
1 x	Salida para cables 28x5 mm (2 pcs)
1 x	Prisionero aluminio 4 mm Ø (4 uds)
1 x	Switch 3 posiciones DS TX DUPLEX con muelle UP
1 x	Clips para fijar Ala (2 pcs)
1 x	Gancho de remolcador
1 x	Bisagra cilíndrica 2,5 Ø x 10 x 43 mm (10 pcs)
1 x	Perfil de ABS triangular 2.0x1000 mm 90º
1 x	Interruptor SAFETY dos posiciones DC-16/14
1 x	Piloto RC Civil 1/5- 1/6 Scale 12"
1 x	Horn corto de latón M4 para cable (10 pcs)
1 x	Conector ABS "L" 1.0 mm x 1000 mm
1 x	Perfil de ABS de media caña 2,0x1000 mm
1 x	Piloto militar "Fly Boy" tamaño 9cm (Slimline)
1 x	Liston ABS 1,5x2,0x1000 mm
1 x	Pasta para estaño 20 g
1 x	Varilla latón hexagonal Ø 3.5 mm x 1000 mm
1 x	Prolongador servo 20 cm HITEC/JR
1 x	Prolongador Futaba macho 40 cm de silicona
1 x	Liston ABS I 10x5x1000 mm
1 x	Liston ABS 1,5x4,0x1000 mm
1 x	Varilla ABS 1,5x1000 mm
1 x	Tapaporos 500 ml (DOPE)
1 x	Prolongador 90 cm (Futaba)
1 x	Pasta universal color Jet Black 50 g

3,235.84EUR