Top » Catalog » Jeti » JETCB3202+

534.01EUR

DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch
[JETCB3202+]


JETI DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch

Product description and features
The Central Box 320 is designed for a complete management of multiple servos and two receiver batteries for a model with high security requirements.The Central Box 320 has an overload protection on each servo output, 8 channels for high-performance servos up to 60 kg / cm and 10 channels for standard servos up to 30 kg / cm. Especially for the use of powerful and power-hungry servos, the Central Box 320 has an aluminum housing for better cooling. The Central Box 320 offers true battery redundancy, DITEX servo telemetry, JETI EX telemetry and up to three receiver inputs (2x 2.4GHz and 1x 900MHz) for full power and RF signal redundancy.

Configuration via JETI Duplex DS/DC transmitters
With JETI Duplex DC/DS transmitters, the full potential of the Central Box 320 can be fully exploited. The device overview of the JETI Duplex DS/DC transmitter makes it easy to perform the entire configuration of the servo outputs, DITEX servo and JETI EX telemetry, function assignment, and more.

Compatibility with Futaba
The Central Box 320 can also be used with two S.Bus receivers (e .g Futaba R7003SB). Setting up and reading out the telemetry values must, however, be realized with a separatly available JETIBOX.

Switching on and off
The switching on and off process of the Central Box 320 is done with the supplied R/C switch.

Recommended receivers
Two compatible RSat2 receivers are included. Optionally, the use of a REX Assist receiver in combination with a RSat2 receiver is possible, so you get a Central Box with gyro stabilization.

Features
Adjustable powerful BEC for voltage stabilization (connection of standard or HV servos)
DITEX servo telemetry support
Possibility to connect up to 3 receivers with serial communication
built-in Expander function with the possibility of independent connection of up to four JETI EX sensors
Input for magnetic switch or RC switch
Power supply batteries connected via MPX connector
100Hz mode of servo outputs (10ms period)
EX telemetry support (measurement of voltage, current, capacity, temperature, etc.)
Easy settings changes via DC/DS transmitter („Device explorer“)
Robust metal construction with mounting holes


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Straightened rod Ø 0.8 mm x 1000 mm
1 x Aluminium rod Ø 4.0 mm x 3000 mm
1 x Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x Straightened rod Ø 2.0 mm x 1000 mm
1 x Straightened threaded rod M2-1m
1 x Straightened rod Ø 6.0 mm x 1000 mm
1 x Straightened rod Ø 0.5 mm x 1000 mm
2 x Brass hexagonal rod Ø 4 mm x 1000 mm
1 x Straightened threaded rod M3 - 1m
1 x Straightened rod Ø 4.0 mm x 1000 mm
1 x Straightened rod Ø 1.5 mm x 1500 mm
1 x Straightened rod Ø 5.0 mm x 1000 mm
2 x Straightened rod Ø 4.5 mm x 1000 mm
1 x Straightened rod Ø 1.2 mm x 1500 mm
1 x Brass hexagonal rod Ø 3 mm x 1000 mm
1 x Straightened rod Ø 3.0 mm x 1000 mm
1 x Brass rod Ø 1.5 mm x 1000 mm
1 x Straightened rod Ø 2.5 mm x 1000 mm
2 x Brass rod Ø 1.0 mm x 1000 mm
2 x Marker ties (20 pcs)
1 x Tape GFK 25 mm
1 x 20x1000 mm Ring Strap Back To Back
1 x Spikes Band (5 m)
1 x Cinta Goldfix 1m
2 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Tape GFK 38 mm
1 x SE Ring 400 mm (2 pcs)
1 x SE Ring 450 mm (2 pcs)
2 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x SE Ring 240 mm (2 pcs)
1 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x BALSA trip 8.0x8.0x1000 mm
2 x BALSA triangular 6x6x1000 mm
1 x Liston HAYA 10 x 10 x 1000 mm
1 x BALSA trip 5.0x5.0x1000 mm
1 x Linden wood slat 2.0x2.0x1000 mm
1 x Mahogany wood slat 2.0x2.0x1000 mm
1 x Mahogany wood slat 1.5x1.5x1000 mm
1 x BALSA trip 6.0x6.0x1000 mm
1 x Beech dowels 4.0 x 1000 mm
2 x Beech dowels 10 mm x 1000 mm
2 x Pine wood slat 2.0x10.0x1000 mm
1 x Pine wood slat 1.5x3.0x1000 mm
1 x Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x Carbon fiber rod 8.0 mmx1000 mm
2 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x Demoulding wedge red (40 x 20 mm) 5 pcs
1 x Carbon Non-Woven, 160 g/m² 100 cm 25 m
1 x Carbon roving DowAksa / 24k / 1600 tex
2 x Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
2 x Carbon fiber rod 0.8 mmx1000 mm
2 x Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x ARAMID honeycomb 1300x2600x2 mm
1 x Squared carbon wing joinner 5x5x220 mm
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x Carbon fiber rod 16 mm x 1000 mm
1 x Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Gates hinge 30x16 mm (2 pcs)
1 x Flap hinge 33x9 mm (6 pcs)
1 x 25 mm reinforced hinge
1 x Nylon hinge 15x0,3 (10 pcs)
1 x Ball Link Plier
1 x Parachute PV6 for F3J
1 x Silicone 0,35 qmm servos wire Futaba (100 m)
1 x Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x Glass Bubbles 0.19 g/cm³ Panda, tin/ 120 g (approx. 1 l)
1 x Zurich Sport Sunglasse Dark Sensity BROWN Glasses
1 x ABS tube 2.0x1.0x1000 mm
1 x Straightened rod Ø 7.0 mm x 1000 mm
1 x Brass rod Ø 0.8 mm x 1000 mm
1 x SE Ring HACKER 300 mm (2 pcs)
1 x SE Ring 360 mm (2 pcs)
1 x 14x60 mm Mini rings Tie Wraps (4 pcs)
1 x SE Ring 200 mm (2 pcs)
1 x SE Ring 480 mm (2 pcs)
1 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x Balsa panel 1.0x100x1000 mm
1 x BALSA leading edge 8x10x1000 mm
1 x SE Ring 250 mm (2 pcs)
1 x BALSA trip 2.0x10.0x1000 mm
2 x Pine wood slat 2.0x2.0x1000 mm
1 x SE Ring 330 mm (4 pcs)
1 x Pine wood slat 3.0x7.0x1000 mm
1 x A/C quality beech plywood 498x247x1.2 mm
1 x Balsa panel 10x100x1000 mm
1 x A/C quality beech plywood 1520x750x4.0 mm
1 x OBECHI sheet 2.0x3.0x1000 mm
2 x Carbon fiber rod 1.5 mm x 2000 mm
1 x Carbon plate 550x350x1.0 mm ECOTECH
1 x Carbon plate 1000x500x2,0 mm ECOTECH
1 x Carbon fiber rod 5.0 mmx1000 mm
1 x Pine wood slat 10x10x1000 mm
2 x TX 250 mW especial GOPRO
1 x Birch plywood plate 600x300x1.5 mm
1 x Carbon fiber rod 2.5 mmx1000 mm
1 x Modulo telemetria 500 mW/100 mw Radio aire/Tierra Modulo 915 MHz
1 x Carbon fiber rod 7.0 mmx1000 mm
2 x Carbon fiber rod 0.5 mmx1000 mm
1 x Fiberglass plate 1200x1000x0,2 mm
1 x Carbon fiber rod 10 mm x 1000 mm
1 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Lite Plywood panel 600x300x2.0 mm
1 x Pine wood slat 6.0x6.0x1000 mm
1 x Walnut wood slat 1.5x1.5x1000 mm
1 x Birch plywood plate 600x300x2.5 mm
2 x Birch plywood plate 600x300x3.0 mm
1 x Foam plastic plates (310x210x2 mm)
1 x Carbon plate 350x150x0.5 mm
1 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Carbon plate 550x350x2.5 mm ECOTECH
1 x Fiberglass plate 350x150x1.5 mm
1 x Carbon fiber rod 6.0 mmx1000 mm
1 x Carbon fiber flat 1000x3.0x0.5 mm
1 x Brass rod Ø 0.5 mm x 1000 mm
1 x Plywood sheet BEECH 600 x 300 x 2,0 mm
1 x Beech dowels 2.0 x 1000 mm
1 x Pine wood slat 3.0x10.0x1000 mm
1 x Carbon fiber rod 4.0 mmx1000 mm
1 x Birch plywood plate 600x300x2.0 mm
1 x Pin hinge 26x11 mm (10 uds)
1 x Carbon fiber rod 20 mmx1000 mm
1 x Carbon fiber rod 3.0 mm x 1000 mm
1 x Gates hinge aluminium (1 pcs)
4,249.02EUR
Manufacturers
Manufacturer Info
Jeti
Jeti Homepage
Other products
Languages
Español English
Currencies