84.90EUR

Battery RX JETI LiIon RB 6200 7.2v
[HK22985456]

JETImodel Receiver Battery Power Ion 6200 2S2P

Power-Ion accumulators are battery packs suitable to power the receiv-er and servos in the model.
The main advantages of Power-Ion accumulators include high mechanical resistance due to keeping in a metal case. The accumulators are also characterized by a long cycle life. No balancer is needed for their operation and in case the current is higher than 150A, short circuit protection is activated. Overcharge protection is activated if the charging voltage is higher than 5V per cell.

The accumula-tors are functional even at very low or very high temperatures (-10 - +60°C).
Each pack is provided with one two-wire cable with the JR connector for charging and with one two-wire cable with the MPX connector for connection to the model. Both cables are of the same length.
The accumulators are supplied in a plastic case and are fastened to it by tires. The case itself is screwed to a model using anti-vibration rubber grommets, see the picture below. Pay attention to correct placing of the brass washer. Its wider part should be in contact with the assembly board to which the battery case is mounted to avoid extruding the material.

Technical data:
Nominal Capactiy: 6200mAh
Nominal Voltage: 7,2V
Charging End Voltage: 8,4V
Lenght of the leads (1x MPX + 1x JR ): 135mm each
Weight: 230g (incl. Box) / 204g (without Box)
Dimensions: 104x47x50mm (incl. Box) / 70x39x40mm (with out box)
Duration Current max.:40A
Peak Current max.: 80A
Charge max.: 8A (at MPX Connector)

temporarily out of stock

Reviews

Quick Find

Shopping Cart

1 x	PIX Hawk with accesories
1 x	PPM Encoder Module
1 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	Round Rod 6,0x1000 mm
1 x	ABS Strip 1.0x5.0x1000 mm
1 x	Strip 1,5x1,5x330 mm
1 x	ABS I Strip 20x10x1000 mm
1 x	Lock washer 2.2 mm (20 pcs)
1 x	Flat washer 1.7 mm (20 pcs)
1 x	Aluminium wide washer M4 Red (4 pcs)
1 x	M3-M4 rubber washer (8 pcs)
1 x	Aluminium cap bolt washer M3 red (8 pcs)
2 x	Round Rod 1,25x1000 mm
1 x	Strip ABS 2.0x8.0x1000 mm
1 x	ABS I Strip 10x5x1000 mm
1 x	Spring lock washer 3.1 mm (20 pcs)
1 x	Aluminium wide washer M3 red (4 pcs)
2 x	Round Rod 4,0x1000 mm
1 x	Strip ABS 2.0x5.0x1000 mm
1 x	Strip 2,5x1,25x330 mm
1 x	Flat washer 2.7 mm (20 uds)pcs)
1 x	Aluminium cap bolt washer M3 green (8 pcs)
1 x	Quicklock washer 3 mm (10 pcs)
1 x	Strip 3,5x1,75x330 mm
1 x	Circlik for shaft 2.3 mm (10 pcs)
2 x	Aluminium wide washer M4 Blue (4 pcs)
1 x	Strip 2,0x2,0x330 mm
1 x	M3 black washers (4 pcs)
1 x	Flat washer 2.2 mm (20 pcs)
1 x	ABS Strip 1.0x3.0x1000 mm
1 x	Circlik for shaft 1.2 mm (10 pcs)
1 x	Strip ABS 2.0x3.0x1000 mm
1 x	Circlik for shaft 1.5 mm (10 pcs)
1 x	Lock washer 2.7 mm (20 pcs)
1 x	Spring lock washer 4.1 mm (20 pcs)
1 x	Round Rod 5,0x1000 mm
1 x	Quicklock washer 1.5 mm (10 pcs)
1 x	Spring lock washer 2.6 mm (20 pcs)
1 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	Round Rod 2,5x1000 mm
1 x	Strip ABS 2.0x10.0x1000 mm
2 x	Quicklock washer 2.5 mm (10 pcs)
1 x	Lock washer 3.2 mm (20 pcs)
1 x	Spring lock washer 2.1 mm (20 pcs)
1 x	Aluminium cap bolt washer M3 black (8 pcs)
1 x	Aluminium wide washer M3 gold (4 pcs)
1 x	BALSA triangular 15x15x1000 mm
1 x	BALSA leading edge 8x10x1000 mm
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	Linden wood slat 2.0x2.0x1000 mm
1 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	BALSA triangular 8x8x1000 mm
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Liston HAYA 10 x 10 x 1000 mm
1 x	BALSA triangular 10x10x1000 mm
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	OBECHI sheet 2.0x3.0x1000 mm
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	Pine wood slat 3.0x5.0x1000 mm
1 x	Beech dowels 4.0 x 1000 mm
1 x	Pine wood slat 3.0x10.0x1000 mm
1 x	FALCON 20X9 CARBON PROPELLER (GAS)
1 x	Propeller POWER-PROP 14x9
1 x	Red smoke canister 140 g
1 x	Red smoke bombs AX-60 (5 pcs)
1 x	"S" set for planes
1 x	White smoke bombs AX-60 (5 pcs)
1 x	Initior Receiver FRX2 Wireless
1 x	Yellow smoke canister 140 g
1 x	White smoke canister 100 g
1 x	Green smoke canister 65 g
1 x	Yellow smoke canister 100 g
1 x	Green smoke canister 140 g
1 x	Smoke set "S"
1 x	Red smoke canister 65 g
1 x	White smoke canister 140 g
1 x	Black smoke bombs AX-60 (5 pcs)
1 x	White smoke canister 65 g
1 x	Yellow smoke canister 65 g
1 x	Glases Stratus
1 x	Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
1 x	Glases Innovation Plus
1 x	Glases Aspen
1 x	Glases Flitemaster
1 x	Extension 7.5 cm
1 x	Extension PVC 150 cm (Graupner)
1 x	Cable grommet Ø 6.4 mm (4 uds)
1 x	45 mm rods + T patellas set for direction control
1 x	15 mm reinforced hinge
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	ABS tube 6.0x5.0x1000 mm
1 x	ABS tube 8.0x6.0x1000 mm
1 x	Parachute PV6 for F3J
1 x	1/6 Pilot "Tony"
1 x	Flat washer 4.3 mm (20 pcs)
1 x	ABS Strip 1.5x6.0x1000 mm
1 x	Neck strap JETI DS
1 x	Antenna FUTABA 2.4GHz 3PM/8FG/14SG/18SZ/18M
1 x	MZ-10, 5 Channel HoTT
1 x	Round Rod 3,0x1000 mm
1 x	Switch for DS: Short 2 Position
1 x	Decorative caps, multicoloured
1 x	Transmitter GRAUPNER MZ-24 Pro
1 x	Charger HITEC CG-42 TX 7.2v/ RX 4.8v (80 mA)
1 x	Harness for transmitter JETI DUPLEX
1 x	Futaba Radio Case
1 x	Blind nut M3 (4 pcs)
1 x	Nut for mounting M4 (4 pcs)
1 x	Lock nut M6 (10 pcs)
1 x	Hexagonal Nut M3 (10 pcs)
1 x	Treaded hexagonal socket insert M3 Br (4 pcs)
1 x	Battery RX JETI LiIon RB 5200 7.2v
1 x	Teacher / Student Cable
1 x	Hand Pads for Tray JETI
1 x	Blind nut M5 (10 pcs)
1 x	Nut for mounting M3 (10 pcs)
1 x	Nut for mounting M6 (4 pcs)
1 x	Support hands Issuer PROFI TX
1 x	Blind nut M2 (10 pcs)

2,677.69EUR