Top » Catalog » Hispano Aviacion » HABULLMo1O

3,750.09EUR

BULL MØ1 2.600mm ORANGE
[HABULLMo1O]

BULL MØ1 2.600mm ORANGE

An innovative structural design and its original design make the BULL Mo1 original and elegant.
Its NACA shots made by our aeronautical engineers make the Bull Mo1 possibly the most advanced aircraft in the market in terms of the design of "fluid dynamics" on an RC jet.
Fully built in "vacuum technology" with new materials and the most advanced techniques.
The construction quality is higher compared to the standard in the market.
Quick and easy to build.
The large opening at the top allows easy access for the installation of all electronic components and thus can be completely inspected. It has a lower access for the installation and testing of the turbine, with a completely new system for anchoring the turbine.
The flight characteristics are incredible at all speeds, but where it demonstrates its power is in its slow and harmonious flight.
Thanks to this feature, the BULL Mo1 can be flown by novice pilots, but they will delight the most extreme pilots.
The BULL Mo1 has been designed to be used with turbines from 13 Kg to 20 Kg. It is also possible to install a Vector trust to perform 3D maneuvers.
Factory building and custom painting service is available

Wingspan 2.600 mm
Lenght: 2.260 mm
Weigh kit aprox. 6.990 g
Turbine 13 a 20 Kg

under request

Reviews

Quick Find

Shopping Cart

2 x	Motor DLE 170 M- Paramotors
1 x	Big Crow DLE-170M
1 x	Silent-blocks DLE 170M
1 x	Small Crow DLE-170M
1 x	Motor DLE 430 cc - Paramotors
1 x	Softshell Hispano Aviación
1 x	Vest clothes Hispano Aviación
1 x	Adjustable launching hook
1 x	Green smoke canister 100 g
1 x	B4-0 rocket charges (6 pcs)
1 x	Yellow smoke bombs AX-60 (5 pcs)
2 x	Fixed launching hook
1 x	Red smoke bombs AX-60 (5 pcs)
1 x	Blue smoke canister 100 g
1 x	AX-60 starters (5 pcs)
1 x	Red smoke canister 140 g
1 x	White smoke canister 65 g
1 x	Red smoke canister 100 g
2 x	SE Ring 300 mm (2 pcs)
2 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	Foil for sticking flaps and ailerons
2 x	Spikes Band (5 m)
1 x	SE Ring 240 mm (2 pcs)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	SE Ring 330 mm (4 pcs)
2 x	20x200 mm battery rings
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Civilian pilot "G-Man" size 9cm (Slimline)
1 x	Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x	Carbon fiber rod 3.0 mm x 1000 mm
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	XH female balance (5S) connector (2 pcs)
1 x	Lock washer 2.7 mm (20 pcs)
1 x	Quicklock washer 2 mm (10 pcs)
1 x	Savox Brushless Servo SB-2271SG
2 x	Check valve quick hose connector 4-4 mm
2 x	Quick hose connector 3-3 mm
1 x	Body for landing gear Ø 4 mm
2 x	SERVO DES 707 BB MG
1 x	SAVOX SH 0254 servo
2 x	SERVO DES 707 BB MG, Pignons
2 x	40 mm air cylinder
1 x	Servo SAVOX SV-1270 TG
1 x	25 mm carbon servo arm
2 x	Savox HV Brushless Servo SB-2270SG (Swashplate)
1 x	SU 29S 140 carbon landing gear
1 x	Nose leg 155 mm with wheels 70 mm
1 x	Horizontal servo holder
1 x	Futaba 20 mm servo arm
2 x	Motor DLE 200cc Std
1 x	Motor DLE 200cc Premium Muffler
1 x	HITEC 20 mm servo arm with ball link
1 x	Servo holder for retract
1 x	Gasket electric Fuel Pump
2 x	GLOW 5C + accesories
1 x	Servo HITEC D951 TW
2 x	Electric Fuel pump
1 x	PowerFuel RX V2 Fuel Pump
1 x	Gear set HITEC HS-645MG/5645MG/5685MH
1 x	Secraft Fuel system v2, red color
1 x	Gear carbonite set HITEC HS-6965
1 x	Servo HITEC D131 MW nano
1 x	Servo HITEC D85 MG
1 x	Gear set HITEC HS-65 HB
1 x	Servo HITEC HS-311
1 x	Servo HITEC D954 TW
1 x	Brazo servo aluminio HITEC HS-125MG/5125MG
1 x	Servo HITEC HS-225 MG
1 x	Blue aluminium double servo arm V3-Hitec 3,5inch
2 x	Electric Fuel Pump 12V
1 x	SE Ring 360 mm (2 pcs)
1 x	GLOW 9C + accesories
1 x	Junta humo metalica G61 (DLE55RA/DLE61/DLE120)
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	SE Ring 450 mm (2 pcs)
1 x	Giant Scale Muffler D.A. 70
1 x	LOWER TOW HOOK
1 x	ABS Strip 1.5x8.0x1000 mm
1 x	Tapping Screw M2.2x9.5 (10 pcs)
1 x	Titanium M3x0,5x8 mm Flat Head screw (4 pcs)
1 x	Adapter 4,0 mm M8
1 x	Adapter 5,0 mm M6 for spinner 40 mm fixed propeller
1 x	Adapter 3,2 mm M6
1 x	Aluminun wheel collar 2 mm Ø (4 uds)
1 x	Adapter 3,2 mm M8
1 x	3 mm Long Prop Adapter M5
1 x	Motor brushless 1806 - 2300 Kv Cuadracopter
1 x	Actuator Electric 25 mm
1 x	KIRA 600-38 6,7:1
1 x	PYRO 700-45 Long Axi
1 x	PYRO 700-56L
1 x	Jeti Black cap
1 x	Rocket D3-P
1 x	SE Ring 480 mm (2 pcs)
2 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	20x1000 mm Ring Strap Back To Back
1 x
1 x	SE Ring 250 mm (2 pcs)
1 x	Ring 320 mm length (5 pcs)
1 x	Servo TT ACE SHV 1504 MG
1 x	SERVO DES 568 MG
1 x	Landing gear clamp for Ø 4 mm (4 uds)
1 x	Quick hose connector 4-4 mm
1 x	Landing gear strap medium (4 uds)
1 x	Servo DITEX TD2612S
1 x	Bearing block for noseleg landing gear
1 x	Propeller FALCON 32,5x11 PUSHER Carbono
1 x	160 mm carbon undercarriage (2pcs)
1 x	SSPS105 Super Hi-Power servo
1 x	Compact on-board starting system (9724)
1 x	Electromotor starter EME 35cc
1 x	Motor MVVS 2.0/1120
1 x	7 Servo SET 9g DS MG + Full servo extension cable set for Avanti
1 x	Soporte metal para servos
1 x	SERVO DES 658 BB MG
1 x	SERVO DES 806 Pignons
1 x	Aluminun wheel collar 5 mm Ø (4 uds)
1 x	Dual Sequencer Gear and Canopy
1 x	Faucet FESTO
1 x	Aluminun wheel collar 3 mm Ø (4 uds)
1 x	Landing gear clamp for Ø 3 mm (4 uds)
1 x	Nylon threaded block M4 (2 uds)
1 x	Polyurethan FESTO hose 3x0,5 mm, transparent
1 x	Nylon threaded block M6 (2 uds)
1 x	Festo Adaptor Tygon Large/4mm
1 x	Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x	Angled clevis with threaded rod M3
1 x	Hose stopper 4 mm
1 x	Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x	Landing gear strap large (4 uds)
1 x	Landing gear strap small (4 uds)
1 x	Festo 4mm Tubing Holder (10 uds)
1 x	Body for landing gear Ø 3 mm
1 x	Landing gear clamp for Ø 2 mm (4 uds)
1 x	Nylon gear block Ø 3 mm (2 uds)
1 x	Nylon gear block Ø 6 mm (2 uds)
1 x	Socket Head Screw M2,5x12
1 x	Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor)
1 x	SAVOX SH 0254 servo
1 x	Legs + electric brakes for Viper Jet 90
1 x	Fiberglass landing gear for 140-160
1 x	Indoor landing gear set
1 x	Servo DITEX EL0510M
1 x	Gearbox for VM motors (3:1)
1 x	DLE 30 complete electronic ignition
1 x	Aluminium ignition bad (red)
1 x	Variable Flow Smoke Pump System
1 x	Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel)
1 x	Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel)
1 x	Starter EM Gear Power 250
1 x	Servo HITEC HS-635HB Carbonite
1 x	GLOW 2C + accesories
1 x	Set Micro-horns HS-60/81/85
1 x	Servo HITEC HS-70 MG
1 x	BULL MØ1 2.600mm "ALPINE"
1 x	Servo HITEC HS-5485 HB Digi
1 x	Fuselage BULL MØ1 2.600mm

31,166.78EUR