Top » Catalog » Hispano Aviacion » HABULLMo1RDB

4,551.42EUR

BULL MØ1 2.600mm "RED BULL"
[HABULLMo1RDB]

$BULL MØ1 2.600mm \"RED BULL\"$

BULL MØ1 2.600mm "RedBull"

An innovative structural design and its original design make the BULL Mo1 original and elegant.
Its NACA shots made by our aeronautical engineers make the Bull Mo1 possibly the most advanced aircraft in the market in terms of the design of "fluid dynamics" on an RC jet.
Fully built in "vacuum technology" with new materials and the most advanced techniques.
The construction quality is higher compared to the standard in the market.
Quick and easy to build.
The large opening at the top allows easy access for the installation of all electronic components and thus can be completely inspected. It has a lower access for the installation and testing of the turbine, with a completely new system for anchoring the turbine.
The flight characteristics are incredible at all speeds, but where it demonstrates its power is in its slow and harmonious flight.
Thanks to this feature, the BULL Mo1 can be flown by novice pilots, but they will delight the most extreme pilots.
The BULL Mo1 has been designed to be used with turbines from 13 Kg to 20 Kg. It is also possible to install a Vector trust to perform 3D maneuvers.
Factory building and custom painting service is available

Wingspan 2.600 mm
Lenght: 2.260 mm
Weigh kit aprox. 6.990 g
Turbine 13 a 20 Kg

under request

Reviews

Quick Find

Shopping Cart

3 x	Fresa corte diamante Ø 1.0mm (bola)
2 x
3 x	100g Flux Paste for Silver Solder
3 x	Copier 5x20 cm pcs
2 x	Copier 2x20 cm pcs
3 x	1,5x50 mm allen screwdriver
1 x	55% silver electrodes (2 pcs)
4 x	Ball Link Plier
1 x	3,0x60 mm allen screwdriver
2 x	Digital weight, angle and balance meter BASIC
2 x	Fresa corte diamante Ø 2.35mm (flame)
2 x	Crimping tool
4 x	2,0x50 mm allen screwdriver
1 x	Dremel 3000 130W
3 x	Disposable Injector Bags (30x16cm) 100 pcs
3 x	Extra Hard Titanium Herxagon Screwdrivers
2 x	Digital scale up to 40 kg
3 x	Ball Link Plier
2 x	Fabric scissors curved (offset handles), 16 cm / 6" length
2 x	Fresa corte diamante Ø 1.4mm (bola)
3 x	Concave-Convex sandpaper file 13 mm
3 x	2,5x60 mm allen screwdriver
2 x	Ventus 1:4 set of instruments
2 x	1/6 Pilot "Cindy"
1 x	1/12 Pilot "Fighter"
1 x	1/4 Pilot "Mike"
1 x	1/10 Pilot "Jimmy"
1 x	Piloto WWII USAAF 12" Scale 1/6 - 1/5
1 x	Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x	Piloto RC Civil 1/5- 1/6 Scale 12"
1 x	Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x	Civilian pilot "Joe" size 9cm (Slimline)
3 x	1/12 Pilot "Tom"
1 x	Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x	Pilot "Dick" Legends Series (Slimline)
1 x	Starter EM Gear Power 80
2 x
1 x	Z Bender - S Type Tool
3 x	Dust collector for mould cleaning
1 x	Vacuum pump P1-N
1 x	Starter Sullivan-STAR 601
1 x	Piloto jet 130 mm
2 x	1/6 Pilot "Tony"
1 x
2 x	1/6 Pilot "John"
1 x	Hot Glue Stick BLACK
2 x	1/10 Pilot "Jack"
1 x	Z Bender - S Type Tool
1 x	Pilot "Anthony" (Slimline)
1 x	1/6 Pilot "Garry"
1 x	Hot Glue Stick RED
3 x	Piloto Jet "Red" 1/6 Scale
1 x	Hot Glue Stick GREEN
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x	Hexagonal ball head 2.0 x 50 mm
1 x	Pilot "Goose" (Slimline)
1 x	Civilian pilot "G-Man" size 9cm (Slimline)
1 x	Starter 12v (Max 180 and 30ccm)
2 x	Pilot JAN 1/4 Saiplanes
1 x	1/6 Pilot "Buddy"
2 x	1/12 Pilot "Cougar"
1 x	Screwdriver for Torx® TX8
1 x	Profile ABS Square 3 x 1000 mm
1 x	ABS "T" angle 2.0x2.0x1000 mm
1 x	Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x	Profile ABS Square 2 x 1000 mm
2 x	Profile ABS half cane 2.5x1000 mm
1 x	Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x	Profile ABS Square 1 x 1000 mm
1 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	ABS angle 5,0x5,0x1000 mm
1 x	SE Ring 300 mm (2 pcs)
1 x	Tape GFK 25 mm
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Cinta Goldfix 1m
2 x
1 x	SE Ring 330 mm (4 pcs)
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Spikes Band (5 m)
1 x	SE Ring 480 mm (2 pcs)
1 x	SE Ring 240 mm (2 pcs)
1 x	SE Ring 450 mm (2 pcs)
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Marker ties (20 pcs)
1 x	Tape GFK 38 mm
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	Yellow smoke canister 140 g
1 x	White smoke canister 65 g
1 x	Small Crow DLE-170M
1 x	Z type of cable coupler Ø 1.8 (2 uds)
1 x	Carbon fiber rod 3.0 mm x 1000 mm
1 x	Sealing Iron Sleeve PROF
2 x	Precision wrench L100 mm
1 x	Fresa corte diamante Ø 2.35mm (lentil)
2 x	Aramid fibre shears Proton®, 21 cm / 8" length
1 x	PROXXON - DRILL SET 0,5-3,2MM (10PCS.)
2 x	Civilian pilot "Curt" size 9cm (Slimline)
1 x	Civilian pilot "Pamela" size 9cm (Slimline)
1 x	DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301)
1 x	Dremel PERMAGRIT 18 mm round lime
1 x	PERMAGRIT Sanding Block 45° 140x51 mm
1 x	Sandpaper file 13 mm
1 x	Heli blades angle measurer
1 x	1/7 Pilot "Japanese"
1 x	20x1000 mm Ring Strap Back To Back
1 x	SE Ring 400 mm (2 pcs)
1 x	Interface Jack Adapter IKARUS
1 x	Screwdriver for Hexagon 1,27mm
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
1 x	ABS rectangular profile 12x6.0x1000 mm
1 x	Flat Connector 4.0 mm x 1000 mm
1 x	Profile ABS half cane 8.0x1000 mm
1 x	L-Connector 4.0 mm x 1000 mm
2 x	35x14 mm hard foam KOVO wheel (2 pcs)
1 x	DUBRO - BOLTON PRESSURE FITTING 6-32 (1 PC)
1 x	43x14 mm hard foam KOVO wheel (2 pcs)
1 x	170x54 mm SLH KOVO wheel with bearing and metal hub
1 x	73x24 mm hard foam KOVO wheel (2 pcs)
1 x	80x40 mm hard foam KOVO wheel
1 x	115x29 mm (4.50") Type jets aluminium core wheel
1 x	Motor Mega AC 16/25/04 COMBAT
1 x	Motor Mega AC 16/15/05 CE F5J
1 x	Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs)
1 x	Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs)
1 x	13 mm wing servo holder
1 x	Bidule 111 3000 mm Canopy
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	Universal Filter
1 x	Bidule 55 2460 mm Cabina
1 x	Airtop balloon pneumatic wheels ø160 mm with bearing. 1 pair
1 x	Motor Mega AC 16/25/04
1 x	ABS angle 3,0x3,0x1000 mm
1 x	Profile ABS half cane 4x2.5x1000 mm
1 x	Profile ABS triangular 4.0x1000 mm 60º
1 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	Profile ABS half cane 7.0x1000 mm
1 x	Compact on-board starting system (9715)
1 x	Spark motor OS Type F
1 x	Encendido CDI RCAME 1/4*32 Single 120º
1 x	Electric Fuel Pump 12v
1 x	Hose clips 6 mm
1 x	Spark motor OS nº 3
1 x	RF9 Flight Simulator with Spektrum Controller
1 x	GameCommander USB Universal
1 x	Telemetry interface ALTIS 12 cm
1 x	Telemetry interface ALTIS 6 cm
1 x	EC-Cutter
1 x	Turbina DRAGON 30 Kg
1 x	Turbine CHEETAH 160 SE
1 x	POLARON EX 800w charger
1 x	Servo M2x9/16 screw (4 pcs)
1 x	Turbo Prop KS
1 x	Turbine RHINO 200 SE 20.4 Kg
1 x	Digital precision scale up to 2000 g
1 x	Dremel PERMAGRIT thin lime
1 x	Fabric scissors curved Premium, 16 cm / 6" length
1 x	Fresa corte diamante Ø 2.3mm (bola)
1 x	Charger LiPo Charger4
1 x	Aceite AEROSHELL 500 SE Turbina 0,9 kg
1 x	Oil FUCHS 1 liter
1 x	22 mm Cut Disc Proxxon/Dremmel
1 x	Turbine MAMMOTH 25.4 Kg
1 x	Aceite SHELL 560 Turbina 0.9Kg
1 x	Boxed KIT OF 7 Rotary Burrs FINE
1 x	Cut tube
1 x	Crimping tool
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x	Press fitting for 1,0 diam. steel cable (10 pcs)
1 x	BULL MØ1 2.600mm "McLAREN-GULF"
1 x	20x15 Falcon electric V2
1 x	EWC6 40 cm wing connector
2 x	34 mm Alu spinner 4 mm pleg. propeller
1 x	460 mm EPP Floats
1 x	Albatros ,spare fuselage (Top Model)
1 x	DPSI 2001 RV
1 x	Motor Mega AC 16/15/03
1 x	Aluminium tube with fibreglass case ø35x1.5mm, 500mm
1 x	Aluminum Fold Prop Spinner 30 mm / 5.0 mm
1 x	60x25 mm tail wheel "type F3A"
1 x	DUBRO - 102MM / 4" DIA BIG WHEELS (400RV) - 2PCS
1 x	DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch
1 x	Spinner Alumin. propeller pleg. 30 mm / 3,2 mm
1 x	Wheel FEMA 112 mm / 6 mm
1 x	Super Light Wheels(Sponge Tyre) Ø 50mm x 19mm (2pcs) axis Ø 3.5m
1 x	Motor Mega AC 22/35 4S
1 x	Rubber wheel Ø 58mm x 21mm (2pcs) axis Ø 2.6mm
2 x	Wheel 38 mm V2
1 x	Wheel 115 mm with electromagnet and brake disk (2 uds)
1 x	Super light ∅45x9 mm axi ∅3 mm metalic core wheel
1 x	DUBRO - CUB WHEELS (1/3 SCALE) (558TLC) - 2PCS
1 x	Wheel FEMA 140 mm / 6 mm
1 x	69x25 mm (2.75") axle Ø4 mm aluminium core wheel
1 x	Plastic wheels 36 mm (2 pcs)
1 x	Propeller APC 8x4 Glow/Gas
1 x	Propeller MENZ-S 20x10 3 blades
1 x	BULL MØ1 2.600mm "AeroPANDA"
1 x	Set transmisions BULL Mo1 (dura/aluminium)
1 x	Tank BULL MØ1 (3.2 L) + 1x (0.9 L) + 1x (0.9L Smoke) PRO
1 x	ULTIMATUM 2.0 m red/black

40,100.85EUR