Top » Catalog » Hispano Aviacion » HABULLMo1R

3,950.00EUR

BULL MØ1 2.600mm RED
[HABULLMo1R]

BULL MØ1 2.600mm RED

An innovative structural design and its original design make the BULL Mo1 original and elegant.
Its NACA shots made by our aeronautical engineers make the Bull Mo1 possibly the most advanced aircraft in the market in terms of the design of "fluid dynamics" on an RC jet.
Fully built in "vacuum technology" with new materials and the most advanced techniques.
The construction quality is higher compared to the standard in the market.
Quick and easy to build.
The large opening at the top allows easy access for the installation of all electronic components and thus can be completely inspected. It has a lower access for the installation and testing of the turbine, with a completely new system for anchoring the turbine.
The flight characteristics are incredible at all speeds, but where it demonstrates its power is in its slow and harmonious flight.
Thanks to this feature, the BULL Mo1 can be flown by novice pilots, but they will delight the most extreme pilots.
The BULL Mo1 has been designed to be used with turbines from 13 Kg to 20 Kg. It is also possible to install a Vector trust to perform 3D maneuvers.
Factory building and custom painting service is available

Wingspan 2.600 mm
Lenght: 2.260 mm
Weigh kit aprox. 6.990 g
Turbine 13 a 20 Kg

under request

Reviews

Quick Find

Shopping Cart

1 x	Long pinned hinge (6 uds)
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	Small pinned hinge (12 uds)
2 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	Indoor hinge with servo arm integraded
1 x	Micro flex hinge (12 uds)
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Pin hinge 26x11 mm (10 uds)
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	Gates hinge 30x16 mm (2 pcs)
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
1 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x	15 mm reinforced hinge
1 x	Long pinned hinge (12 uds)
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	Gates hinge
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	Small flex hinge (12 uds)
1 x	Flap hinge (6 pcs)
1 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x	Round flex hinge (12 uds)
1 x	Gates hinge aluminium (1 pcs)
1 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	18 mm reinforced hinge
1 x	Motor DLE 200cc Premium Muffler
1 x	GameCommander USB Universal
2 x	Slave-cable USB Easy Sim
2 x	Interface Jack Adapter IKARUS
1 x	Interface Realflight Simulator
1 x	RF9 Flight Simulator with Spektrum Controller
1 x	Solvent Plasti Dip 1000 ml
2 x	500 ml sealer (DOPE)
1 x	Release wax 250ml
2 x	PARTALL® Hi-Temp Wax, 340 g
2 x	Spray Graphit 33
1 x	Universal Colour Paste deep black 50 g
2 x	BALSA leading edge 8x10x1000 mm
2 x	Pine wood slat 10x10x1000 mm
2 x	Linden wood slat 2.0x2.0x1000 mm
1 x	BALSA trip 8.0x8.0x1000 mm
1 x	OBECHI sheet 2.0x3.0x1000 mm
3 x	Beech dowels 3.0 x 1000 mm
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	Walnut wood slat 3.0x3.0x1000 mm
1 x	Pine wood slat 5.0x5.0x1000 mm
2 x	Linden wood slat 3.0x3.0x1000 mm
2 x	BALSA trip 2.0x10.0x1000 mm
2 x	Pine wood slat 3.0x10.0x1000 mm
2 x	BALSA triangular 6x6x1000 mm
2 x	BALSA trip 4.0x4.0x1000 mm
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	Liston HAYA 10 x 10 x 1000 mm
2 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	Mahogany wood slat 1.5x1.5x1000 mm
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Trailing edge BALSA 35x8x1000 mm
3 x	BALSA triangular 10x10x1000 mm
1 x	Pine wood slat 3.0x7.0x1000 mm
3 x	BALSA trip 3.0x5.0x1000 mm
1 x	Softshell Hispano Aviación
1 x	Vest clothes Hispano Aviación
1 x	Cap Hispano Aviación
1 x	ORACOVER transparent Yellow (10 m)
1 x	L-Connector 4.0 mm x 1000 mm
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Screw-lock connector M2 (2 uds)
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	Buy Perforated film 145 cm / 50 m
1 x	Ball link M3 (6 uds)
1 x	Blue metalic ball link M2/2 azul (2 pcs)
1 x	Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm)
1 x	Blind nut M5 (10 pcs)
1 x	Small pinned hinge (6 uds)
1 x	Soporte grifo FESTO (2 pcs)
1 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x	Antenna Cloverleaf 5.8 GHz Tx - Rx
1 x	Ball Link Plier
1 x	Support conector MPX (6 pcs)
1 x	Pine wood slat 6.0x6.0x1000 mm
1 x	Pine wood slat 3.0x5.0x1000 mm
2 x	Beech dowels 2.0 x 1000 mm
1 x	resin-hardener package L-385 with hardener H-385 (875 g)
2 x	resin-hardener package L-385 with hardener H-385 (3.5 Kg)
2 x	MEKP Harderner 100 g
1 x	resin-hardener L-385 H-385 (625 g)
1 x	Adapter 2,3 mm M5 for spinner 30 mm fixed propeller
1 x	Ciano KAVAN Medium 20g
1 x	Allen wheel collar M3x5
1 x	Plasti Dip Liquid Tape 429 ml black
1 x	Brazo servo KAVAN doble aluminio 25T - 2.5" M3
1 x	A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x	KAVAN Hand crank fuel pump
1 x	Balsa panel 2.5x100x1000 mm
1 x	Spray adhesive INFUTAC (Clear) 500 ml
1 x	6 mm Prop Adapter M8
1 x	Spray EC Red 400ml
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x	Adapter 3,0 mm M6
1 x	4 mm Prop Adapter M6
1 x	Combustible Glow "KAVAN" air/heli 10% nitro
1 x	Balsa panel 3.0x100x1000 mm
1 x	EXTRA NG 74" white/red/blue (Skywing RC)
1 x	EXTRA 300 78" V3 Yellow/Red/Blue
1 x	PITTS CHALLENGER 87″ 2.20m (120cc) 03 ARF
1 x	EXTRA 330SC-E 95" Orange/Blue/White
1 x	EXTRA NG 85" 2159mm red/white
1 x	Sukhoi 29S 2,2 m V2 YELLOW/BLACK (SebART)
1 x	Sukhoi 29S 2,2 m V2 CLASSIC BLUE (SebART)
1 x	LASER 73" 1.85m (05) PILOT
1 x	Katana Mini carbon wheel pants (2 pcs)
1 x	Conector MR-60 (pareja)
1 x	BALSA trip 10x10x1000 mm
1 x	Hobbylite Filler, Balsa colour
1 x	Pin hinge 34x16 mm (10 uds)
1 x	Fuel bottle 500 ccm
1 x	A/C quality beech plywood 1520x750x4.0 mm
1 x	A/C quality beech plywood 600x300x8.0 mm
1 x	2,3 mm Prop Adapter M5
1 x	BALSA triangular 15x15x1000 mm
1 x	10 mm aluminium spinner (Kavan)
1 x	BALSA trip 6.0x6.0x1000 mm
1 x	BALSA triangular 8x8x1000 mm
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
1 x	Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x	Adapter 3,2 mm M5 for spinner 30 mm fixed propeller
1 x	Balsa panel 6.0x100x1000 mm
1 x
1 x	Universal Charging Lead - 500mm - 4mm to Glow Plug Igniter
1 x	Partall paste 650 g
1 x	Adapter 3,0 mm M8
1 x	5 mm Prop Adapter M8
1 x	2 mm Prop Adapter M5
1 x	Ferrita 27x14x7 mm
1 x	Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x	Aluminun wheel collar 3 mm Ø (4 uds)
1 x	Cargqador GensAce IMARS III Pro Smart Balance RC
1 x	Charger GensAce IMARS Dual Channel AC200W/DC300Wx2
1 x	Jun-Si iCharger 4010 Duo
1 x	Cable adapter iCharger
1 x	Propeller 8x4 Electric
1 x	Propeller 9x7 SlowFlyer
1 x	Propeller 3x3
1 x	Propeller 8x4,3 SlowFlyer
1 x	Propeller 3x2
1 x	Propeller 9x4,7 SlowFlyer
1 x	Piñones SAVOX SH-0350
1 x	FIALA Propeller 23x8 Electric
1 x	Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor)
1 x	Servo SAVOX SW-1250 MG digi
1 x	Motor DLE 200cc Std
1 x	Savox HV Brushless Servo SB-2270SG (Swashplate)
1 x	Big Crow DLE-170M
1 x	Escape DLE-60 Dcha
1 x	Propeller FALCON 32,5x11 PUSHER Carbono
1 x	Motor DLE 430 cc - Paramotors
1 x	Motor DLE 170 M- Paramotors
1 x	Canister combo DLE 111 cc
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	Beech dowels 4.0 x 1000 mm
1 x	Cilinder DLE 30 - DLE 60
1 x	Canister combo DLE 170 cc
1 x	Beech dowels 10 mm x 1000 mm
1 x	CENTRAL PROPELLER BOLT FOR DLE85/111/120
1 x	Carburetor DLE 30
1 x	Liston HAYA 3 x 10 x 1000 mm
1 x	Small Crow DLE-170M
1 x	DLE 85 / DLE111 / DLE120 Prop Washer
1 x	Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg
1 x	ABS "T" angle 10.0x10.0x1000 mm
1 x
1 x	Threaded coupler M3 (10 uds)
1 x	Birch plywood plate 600x300x3.0 mm
1 x	Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x	Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
1 x	quality beech plywood BIRCH 600x300x2.0 mm
1 x	Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x	Flat washer 4.3 mm (20 pcs)
1 x	Propeller MENZ-S 16x10 3-Blades
1 x	Propeller MENZ-S 19x8
1 x	Propeller MENZ-S 20x6 Pusher
1 x	BULL MØ1 2.600mm GREEN
1 x	EXTRA NG 85" 2159mm yellow/blue
1 x	DLE 85/111/120 Crankshaft keyway
1 x	Hardener Aero EPH 161 (250 g)
1 x	White gelcoat 1 Kg
1 x	resin-hardener L-385 H-385 (5000 g)
1 x	PIX Hawk with accesories
1 x	ABS rectangular profile 10x5.0x1000 mm
1 x	ABS I Strip 10x5x1000 mm
1 x	DUPLEX 2.4EX Central Box 210
1 x	Fibra de vidrio 80 g/m² (2 m x 100 cm)
1 x	3 mm Long Prop Adapter M5
1 x	Adapter 3,0 mm M6 for spinner 40 mm fixed propeller
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Adapter 3,2 mm M6
1 x	COMPACT drive 26/45-20 DL=175 motor
1 x	Excentric gearbox for 2,0mm axis (4,5:1)
1 x	Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs)
1 x	Flat washer 2.2 mm (20 pcs)
1 x	Servo NARO Max Std
1 x	Hovercraft sailcloth
1 x	2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x	Propeller Pleg CAM Carbon 15x8
1 x	Propeller MENZ-S 15x8 3 blades
1 x	Propeller MENZ-S 16x8
1 x	Propeller MENZ-S 16x8 3-Blades
1 x	Threaded insert M5 (10 pcs)
1 x	FunCub NG verde RR
1 x	Wheel collar 6 mm Ø (4 uds)
1 x	Antenna MULTIPLEX 2.4 GHz 400mm RX-9/12/16-DR pro
1 x	A/C quality beech plywood 600x300x0.6 mm
1 x	Magnetic Interruptor MULTIPLEX
1 x	Wheel collar 2 mm Ø (4 uds)
1 x	Wheel 28 mm
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Set transmisions BULL Mo1 (dura/aluminium)

30,798.85EUR