Top » Catalog » Hispano Aviacion » HABULLMo1B

3,950.00EUR

BULL MØ1 2.600mm BLUE
[HABULLMo1B]

BULL MØ1 2.600mm BLUE

An innovative structural design and its original design make the BULL Mo1 original and elegant.
Its NACA shots made by our aeronautical engineers make the Bull Mo1 possibly the most advanced aircraft in the market in terms of the design of "fluid dynamics" on an RC jet.
Fully built in "vacuum technology" with new materials and the most advanced techniques.
The construction quality is higher compared to the standard in the market.
Quick and easy to build.
The large opening at the top allows easy access for the installation of all electronic components and thus can be completely inspected. It has a lower access for the installation and testing of the turbine, with a completely new system for anchoring the turbine.
The flight characteristics are incredible at all speeds, but where it demonstrates its power is in its slow and harmonious flight.
Thanks to this feature, the BULL Mo1 can be flown by novice pilots, but they will delight the most extreme pilots.
The BULL Mo1 has been designed to be used with turbines from 13 Kg to 20 Kg. It is also possible to install a Vector trust to perform 3D maneuvers.
Factory building and custom painting service is available

Wingspan 2.600 mm
Lenght: 2.260 mm
Weigh kit aprox. 6.990 g
Turbine 13 a 20 Kg

under request

Reviews

Quick Find

Shopping Cart

1 x	7 Servo SET 9g DS MG + Full servo extension cable set for Avanti
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
2 x	Foil for sticking flaps and ailerons
2 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	Tape GFK 38 mm
2 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	20x1000 mm Ring Strap Back To Back
1 x	Tape GFK 25 mm
1 x	20x200 mm battery rings
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x	SE Ring 200 mm (2 pcs)
3 x	Ring 320 mm length (5 pcs)
1 x	SE Ring 300 mm (2 pcs)
2 x	Cinta Goldfix 1m
1 x	Trike XL motor set (motor+esc+prop)
1 x	Rescue 1,8m2 / BackPack
2 x	Paramotor BackPack XXS 2
1 x	Parachute PV6 for F3J
1 x	Ballast 700gr OPALE
2 x	Savox HV Brushless Servo SB-2270SG (Swashplate)
3 x	Jeti Black cap
1 x	Extinguisher CO2 - 2 Kg
1 x	Blue aluminium servo arm V1-Hitec 20 mm M2
1 x	Servo MKS HV6120H
1 x	Oracover Yellow CADMIO 10 m
1 x	Cross Connector 4.0 mm x 1000 mm
1 x	Servo HITEC D-955 TW Titanium
1 x	Conector Servo female 4 pines
1 x	EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
1 x	ALU servo arm 90º 3 mm shaft
1 x	Antenna holder bracket double
4 x	Servo Robbe FS 128 BB MG HV Digital
1 x	SE Ring 400 mm (2 pcs)
1 x	Suncover 100cc Red
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	SE Ring 250 mm (2 pcs)
1 x	SE Ring 350 mm (2 pcs)
2 x	SE Ring 480 mm (2 pcs)
1 x	Tape GFK 50 mm
1 x	Adapter 4,0 mm M6
1 x	Adapter 3,0 mm M8
1 x	4 mm Prop Adapter M6
1 x	3,2 mm Prop Adapter M5
1 x	Para-RC "RC-Evo-Cross" Rescue
1 x	Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x	Aluminun wheel collar 3 mm Ø (4 uds)
1 x	Adapter 3,2 mm M6 for spinner 40 mm fixed propeller
1 x	Jeti Advance Plus Program Card
2 x	3 mm Long Prop Adapter M5
1 x	Hacker X-Pro USB interface V2
1 x	Allen wheel collar M3x3
1 x	Adapter 3,2 mm M8
1 x	Tarjeta programadora RAY G2
1 x
1 x	10 mm dogdrive props
2 x	SAVOX SH 0254 servo
1 x	Windsock Ozone L - 700 mm
1 x	Parachute P4
1 x	Opale Rucksack
1 x	OPTOTRONIX Aurora LCU
1 x	PowerBox PowerExpander SRS
1 x	500 ml sealer (DOPE)
1 x	Plasti Dip Liquid Tape 429 ml black
1 x	PowerBox DigiSwitch V2 JR/JR
1 x	Switch magnet for gas cap and magnet switch actuators
1 x	PowerBox iGyro 3xtra
2 x	Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor)
1 x	Servo-V-Limiter 5.2V
1 x	DPSI Micro SingleBat 5.9V/7.2V magnetic switch
1 x	BlueCom™ Adapter (iOS)
2 x	PowerBox iGyro SRS + GPS Modul
1 x	PowerBox OLED display
2 x	DPSI OCP Overload protection
1 x	Extension 30 cm (Futaba)
1 x	Extension silicon 50 cm (Graupner)
2 x	200 mm extensión servo HITEC/JR
1 x	Extension silicon 30 cm male (Futaba)
1 x	Extension silicon 25 cm (Graupner)
1 x	Cable silicona female batt. receptor 30 cm (Futaba)
1 x	0,14 mm PVC servo wire extension, ZH micro conector.
1 x	Extension silicon 30 cm male (Graupner)
1 x	Futaba Female 40 cm extension
1 x	Solvent Plasti Dip 1000 ml
1 x	Plasti Dip Liquid Tape 429 ml orange
1 x	ABS tube 4.0x3.0x1000 mm
1 x	Spray EC Red 400ml
1 x	Plasti Dip Liquid Tape 429 ml black
2 x	Spray YELLOW Inca Lexan 150ml
1 x	Presto SF Light Filler styrene-free (420 g)
1 x	1000 ml sealer (DOPE)
1 x	Release wax 250ml
1 x	DPSI Micro-DualBat 5.9V / 7.2V MPX-JR
1 x	PowerBox MagSensor red connector
1 x	OLED-Display for PowerBox Mercury SRS
2 x	DUPLEX 2.4EX Central Box 210
1 x	DPSI Micro - DualBat 5.9/7.2 MPX-2xMPX dual
1 x	PowerBox Cockpit SRS (incl. SensorSwitch)
1 x	Power Box GPS Sensor III
1 x	PowerBox iGyro SRS
1 x	BlueCom™ Adapter (Android / WP)
2 x	DUPLEX 2.4EX Central Box 220 + 2x Rsat2
1 x	Extension for LC-Display 50cm
1 x	Extension silicon 50 cm (Futaba)
1 x	Mini Infrared Thermomiter
1 x	Stickers-digit for marking
1 x	Transmitter GRAUPNER MZ-24 Pro
1 x	Canopy Latch
1 x	Servo Robbe FS 525 BB MG HV
1 x	Beech dowels 2.0 x 1000 mm
1 x	Aluminium sheet 500x250x0,5mm
1 x	Brazo servo aluminio 1.25/1.5" Futaba/MKS/Savox
1 x	20-25mm Servo Arm
1 x	10-15mm Servo Arm
1 x	10-15mm Servo Arm HITEC
1 x	Recessed MPX connector support (6 pcs)
1 x	Support Antena 2.4 Ghz (2 pcs)
1 x	Support ECU Xicoy X-45
1 x	Support Filtro FESTO
1 x	Tube support Ø 6mm (10 pcs)
1 x	Antenna Hole Cap V1 (Silver)
1 x	Support XT60 conector (2 pcs)
1 x	Support FUEL DOT V3
1 x	Soporte grifo FESTO (2 pcs)
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Support Flush MPX Conector (6 pcs)
1 x	Tapa estado carga XT-60 (6 pcs)
2 x	White 2,4 GHz antenna exit guides (2 pcs)
1 x	Support pump Xicoy X45
2 x	SUPER STRANGTH SERVO ARMS FUTABA LONG (8 PCS)
1 x	Turbina X132 H "Compact Version"
1 x	SE Ring 360 mm (2 pcs)
1 x	A30-M/L/XL Backmountset complete
1 x	Battery LiFe TopFuel 3100 mAh 3s MTAG 30C
1 x	Esc MasterBasic 55SB
1 x	Alu-Cross for Backmount of A60-V2-Backmountmotors
1 x	Turbina KINGTECH K142 G4M
1 x	Turbine KingTech K30G Restart
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	SE Ring 240 mm (2 pcs)
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	Spikes Band (5 m)
1 x	Turbina X45 H "compact"
1 x	Esc MasterBasic 40SB
1 x	A60 Motor Mount Alu complete set
1 x	Bearings for motors hacker A50
1 x	Battery charging cable XT60
1 x	Battery LiFe -2100/25C-3S 9.9V
1 x	Battery LiFe -3800/25C-3S 9.9V
1 x	Turbina KINGTECH K320 G5
1 x	Turbine KINGTECH K160 G4
1 x	Filter KingTech
1 x	KingTech K45TP G4 Turboprop
1 x	KingTech Turbineoil 5L
1 x	DYMOND VTX UBS Programming adapter
1 x	ProgBOX MASTER Hacker
1 x	Lock nut M2 (20 pcs)
1 x	Lock nut M5 (10 pcs)
1 x	Adapter lead MPX/EC3
1 x	Nitroverdu 500 ml
2 x	DPSI LR-S (with push buttons)
1 x	Wheel FEMA 112 mm / 6 mm
1 x	DPSI RV Mini 6 Magic with Gas-Cap switch
1 x	Extension lead 15 cm Multiplex
1 x	servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x	PowerBox PIONEER incl. microSwitch
1 x	DUPLEX 2.4 EX MVario2
1 x	DUPLEX 2.4 EX MBar
1 x	Beech dowels 4.0 x 1000 mm
1 x	Servo BLUE Bird BLS-H71B v2
1 x	Propeller APC 11x8.5 Electric
1 x	Couple M4 for wire (10 pcs)
1 x	Propeller APC 10x7 SF
1 x	29,0 mm propeller (left propeller)
1 x	Propeller APC 14x12 Electric
1 x	Propeller APC 10x6 Electric
1 x	Propeller APC 10x4.7 SF Pusher
1 x	Locking cable tie 2.5x100 (uds)
1 x	Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x	16x10 tree blades propeller Master Airscrew
1 x	Aramid 50 daN 50 m
1 x	Adapter 5,0 mm M6 for spinner 40 mm fixed propeller
1 x	14 mm Portholes for screws (10 pcs)
1 x	Adapter 3,0 mm M6 for spinner 40 mm fixed propeller
1 x	Locking cable tie 3.2x142 (uds)
1 x	Propeller POWER-PROP 7x7
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Set cintas unión paracaídas 145 cm
1 x	Propeller APC 12x10 Electric
1 x	Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x	Wing OXY 5,0 m2
1 x	12x6 tree blades propeller
1 x	10x7 tree blades propeller
1 x	Adapter 2,3 mm M5 for spinner 30 mm fixed propeller
1 x	Lock washer 2.2 mm (20 pcs)
1 x	Long ball link M3 (6 uds)
1 x	M2/M1/6 3Diam long black ball link V1 (6 pcs)
1 x	Long ball link M2 (6 uds)
1 x	Lock nut M2.5 (10 pcs)
1 x	Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x	Charger 220/110v
1 x	Spray adhesive AEROFIX 2
1 x	Painting GHT Lexan Black 150 ml
1 x	Set freno para ruedas Dia. 127 mm
1 x	150 Newtons FEMA absorber
1 x	Wheel FEMA 165 mm / 8 mm
1 x	DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch
1 x	Compact on-board starting system (9512)
1 x	Adapters for 7.5 - 35cc aircraft and naval engines
1 x	Restrictor FESTO 3/3 mm
1 x	Extension silicon 100 cm (Futaba)
1 x	Extension silicon 75 cm (Graupner)
1 x	Extension silicon 30 cm female (Graupner)
1 x	Extension silicon 30 cm female (Futaba)
1 x	Cable silicona macho batt. receptor 30 cm (Graupner)
1 x	Circlick securite
1 x	Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x	silicon 100 cm Futaba Extension Ø 0,35 mm
1 x	Propeller set 400 (2R+2L)
1 x	Propeller mounting nuts Black / Silver Rocket 400 or Phatom simi
1 x	FA27.2×8.9 Prop-2PCS/PAIR
1 x	Propeller APC 11x7 Electric
1 x	8 mm Adapter for AXI53xx
1 x	Landing gear strap large (4 uds)
1 x	DPSI magnetic switch actuator (PCB)
1 x	Extension for SensorSwitch 60cm
1 x	PowerBox 12
1 x	DUPLEX 2.4EX MUI 150 Sensor
1 x	DC24 II Transmitter case insert
1 x	PowerBox MAG Sensor
1 x	Magnetic Interruptor MULTIPLEX
1 x	COPILOT Multiplex
1 x	Arnes cruzado Confort de Luxe PROFI
1 x
1 x	ULTIMATUM 2.0 m Red Bull
1 x	ULTIMATUM 2.0 m orange/blue
1 x	BULL MØ1 2.600mm (mono color)
1 x	Softshell Hispano Aviación
1 x	Cable S.BUS 3 salidas 300 mm
1 x	Regulador NAVY 540R
1 x	R617 FS 2,4 GHz receiver
1 x	Motor PERMAX BL-O 3520-920 (Extra 330 SC)
1 x	LENTUS Multiplex Fundas alas
1 x	ULTIMATUM 2.0 PRO "McLAren"
1 x	BULL MØ1 2.600mm YELLOW
1 x	Wing Joiner ULTIMATUM 2.0 m

51,206.78EUR