Top » Catalog » Hispano Aviacion » HABULLMo1O

3,750.09EUR

BULL MØ1 2.600mm ORANGE
[HABULLMo1O]

BULL MØ1 2.600mm ORANGE

An innovative structural design and its original design make the BULL Mo1 original and elegant.
Its NACA shots made by our aeronautical engineers make the Bull Mo1 possibly the most advanced aircraft in the market in terms of the design of "fluid dynamics" on an RC jet.
Fully built in "vacuum technology" with new materials and the most advanced techniques.
The construction quality is higher compared to the standard in the market.
Quick and easy to build.
The large opening at the top allows easy access for the installation of all electronic components and thus can be completely inspected. It has a lower access for the installation and testing of the turbine, with a completely new system for anchoring the turbine.
The flight characteristics are incredible at all speeds, but where it demonstrates its power is in its slow and harmonious flight.
Thanks to this feature, the BULL Mo1 can be flown by novice pilots, but they will delight the most extreme pilots.
The BULL Mo1 has been designed to be used with turbines from 13 Kg to 20 Kg. It is also possible to install a Vector trust to perform 3D maneuvers.
Factory building and custom painting service is available

Wingspan 2.600 mm
Lenght: 2.260 mm
Weigh kit aprox. 6.990 g
Turbine 13 a 20 Kg

under request

Reviews

Quick Find

Shopping Cart

2 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
2 x	ABS tube 16.0x14.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	ABS tube 4.0x3.0x1000 mm
1 x	ABS tube 3.0x2.0x330 mm
1 x	ABS tube 7.0x5.0x1000 mm
1 x	Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm)
1 x	Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm)
1 x	Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
1 x	ABS tube 4.0x2.0x1000 mm
2 x	ABS tube 14.0x10.0x1000 mm
1 x	ABS tube 8.0x6.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
2 x	ABS tube 5.0x4.0x1000 mm
2 x	ABS tube 5.0x4.0x156 mm
2 x	ABS tube 9.0x8.0x1000 mm
1 x	Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	ABS tube 10.0x8.0x1000 mm
2 x	Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x	Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm)
2 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
2 x	ABS tube 20.0x18.0x1000 mm
1 x	ABS tube 3.0x1.0x1000 mm
1 x	ABS tube 6.0x5.0x1000 mm
1 x	ABS tube 8.0x7.0x1000 mm
2 x	ABS tube 9.0x7.0x1000 mm
1 x	Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x	Aluminum Bayonet / strongal D25 mm / 1 m
1 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x	ABS tube 7.0x6.0x1000 mm
1 x	Cable grommet Ø 3.2 mm (4 uds)
1 x	Ball link M3 (10 pcs, flat ball)
1 x	Profile ABS Square 3 x 1000 mm
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	Towing hook
1 x	Angle of incidence meter
1 x	Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
1 x	Landing gear clamp for Ø 4 mm (4 uds)
1 x	Polyurethan FESTO hose 3x0,5 mm, transparent
1 x	Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x	ABS tube 12.0x10.0x1000 mm
1 x	ABS tube 5.0x3.0x1000 mm
2 x	Tailwheel for 1-3 kg models
1 x	Starter 12v (Max 180 and 30ccm)
1 x	Vest clothes Hispano Aviación
1 x	Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm)
1 x	Teflon rollers 40 mm x 15 mm Diam.
1 x	Peel ply 95 g/m² (plain weave) 20 mm x 100 m
1 x	Glass fibre braided sleeve (45mm) roll 10m
1 x	Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm)
1 x	Styrene plate 320x120x1.0 mm
1 x	Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m
1 x	Straightened rod Ø 1.2 mm x 1500 mm
1 x	Crystal Universal RX 35.090 Ch 69
1 x	Crystal TX 35.050 Ch 65
1 x	Crystal Universal RX 35.140 Ch 74
1 x	Quicklock washer 4 mm (10 pcs)
1 x	Aluminium wide washer M4 Black (4 pcs)
1 x	Lock washer 4.3 mm (20 pcs)
1 x	Flat washer 1.7 mm (20 pcs)
1 x	Carbon tube 3K-Matt (L 1000 mm, Ø25 mm, Ø23 mm)
1 x	Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm)
1 x	Shirt Hispano Aviación
1 x	Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm)
2 x	Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm)
1 x	Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m)
1 x	Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm)
1 x	Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm)
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x	Cyanocrylate MD GA460 odourless 20g
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x	Aro pasacable Ø25 mm (4 pcs)
1 x	Sandwich carbon + poplar 2mm + carbon 290x160 mm
1 x	LA500 Autogyro
1 x	EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
1 x	Conector AS150 7mm antichispazo (Set: 2 pares)
1 x	2 mm female connector (2 pcs) with safety connector
1 x	Connectors banna oro 4 mm (M/F) (ultralight)
1 x	Connectors banna oro 8,0 mm 5 pcs(Female)
1 x	Connectors DEANS 4 pins (1 pair)
1 x	Optotronix Aurora Plug
1 x	Connectors banna oro 3,5 mm (M/F)
1 x	Conector BEC female (10 pcs)
1 x	2 mm male connector (2 pcs) with safety connector
1 x	Gold antispark 4 mm plug
1 x	Actuador lineal HLS12-100210-7.4v
1 x	Grub screw M3x3 shouldered (2 pcs)
1 x	Screw M3x16
1 x	Head lower part
1 x	Balls 4 mm
1 x	Bearing 3x6x2,5
1 x	Head core
1 x	Head runner
1 x	Blade holder upper
1 x	Tail boom
1 x	Screws flush mount M2
1 x	Head spacer
1 x	Head core bushing
1 x	Rotorshape Elevator
1 x	Side rudder
1 x	Side Plate
1 x	Rotorhead pushrod
1 x	Steering lever
1 x	Washer 2.2×4
1 x	Raer wall
1 x	Screws M1,6x6 Allen
1 x	Head upper part
1 x	30 cm DEANS female connector
1 x	Gold antispark 5,5 mm plug
1 x	XH male balance (2S) connector (2 pcs)
1 x	Connectors banana oro 6,0 mm Ultralight (M/F)
1 x	XH female balance (2S) connector (2 pcs)
1 x	Connectors banna oro 4 mm (M/F)
1 x	Connectors banna oro 6,0 mm (M/F)
1 x	Banna gold connector 2,5 mm (100 M/F pairs)
1 x	Wing connector 8pin with pin strip, plug & socket
1 x	Conector BEC male (10 pcs)
1 x	XH male balance (4S) connector (2 pcs)
1 x	Connectors DEANS (T)
1 x	EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
1 x	XH male balance (3S) connector (2 pcs)
1 x	XH male balance (5S) connector (2 pcs)
1 x	Connectors banna gold 5,5 mm (M/F)
1 x	Banna gold connector 2,5 mm (M/F)
1 x	Connectors banna oro 0,8 mm (M/F)
1 x	XH female balance (5S) connector (2 pcs)
1 x	Conector Servo female 4 pines
1 x	Actuator Electric 25 mm
1 x	FEMA DEFLECTOR LEVER FOR WHEEL BRAKE,
1 x	28 mm tailwheel unit
1 x	Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b
1 x	Electric Landing Gear "Black Edition" ULTIMATUM 2.0 (Elektron Re
1 x	Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel)
1 x	Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)

4,142.74EUR