Top » Catalog » Hispano Aviacion » HABULLMo1R

3,950.00EUR

BULL MØ1 2.600mm RED
[HABULLMo1R]

BULL MØ1 2.600mm RED

An innovative structural design and its original design make the BULL Mo1 original and elegant.
Its NACA shots made by our aeronautical engineers make the Bull Mo1 possibly the most advanced aircraft in the market in terms of the design of "fluid dynamics" on an RC jet.
Fully built in "vacuum technology" with new materials and the most advanced techniques.
The construction quality is higher compared to the standard in the market.
Quick and easy to build.
The large opening at the top allows easy access for the installation of all electronic components and thus can be completely inspected. It has a lower access for the installation and testing of the turbine, with a completely new system for anchoring the turbine.
The flight characteristics are incredible at all speeds, but where it demonstrates its power is in its slow and harmonious flight.
Thanks to this feature, the BULL Mo1 can be flown by novice pilots, but they will delight the most extreme pilots.
The BULL Mo1 has been designed to be used with turbines from 13 Kg to 20 Kg. It is also possible to install a Vector trust to perform 3D maneuvers.
Factory building and custom painting service is available

Wingspan 2.600 mm
Lenght: 2.260 mm
Weigh kit aprox. 6.990 g
Turbine 13 a 20 Kg

under request

Reviews

Quick Find

Shopping Cart

1 x	Profile ABS half cane 3x1000 mm
1 x	Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x	Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
2 x	ABS angle 5,0x5,0x1000 mm
1 x	Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x	Profile ABS half cane 2.5x1000 mm
1 x	ABS angle 1.5x1.5x1000 mm
1 x	ABS angle 4,0x4,0x1000 mm
1 x	U Profile ABS 2,0x4,0x1000 mm
1 x	Profile ABS Square 4 x 1000 mm
2 x	Cross Connector 4.0 mm x 1000 mm
2 x	Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
2 x	Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x	20x1000 mm Ring Strap Back To Back
2 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	Marker ties (20 pcs)
2 x	SE Ring 450 mm (2 pcs)
2 x	SE Ring 250 mm (2 pcs)
2 x	Ring 320 mm length (5 pcs)
1 x	SE Ring 330 mm (4 pcs)
2 x	Tape GFK 50 mm
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
2 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	Spikes Band (5 m)
1 x	SE Ring 350 mm (2 pcs)
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	Foil for sticking flaps and ailerons
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Tape GFK 25 mm
1 x	Turnbuckle M2x29/43 (2pcs)
1 x	SE Ring 240 mm (2 pcs)
1 x	Tape GFK 38 mm
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	GameCommander USB Universal
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	Carbon Non-crimp ST 100 g/m² 50 cm x 10 m
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	JR silicone servo wire 0,35 qmm / 5m
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	ABS tube 6.0x5.0x1000 mm
1 x	6 mm M3 variable inclined horn
1 x	Support Pitot JETI
1 x	Support conector MPX (6 pcs)
1 x	Rubber profile 8-2 mm 2M
2 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	L-Connector 1.0 mm x 1000 mm
2 x	Profile ABS half cane 8.0x1000 mm
2 x	Profile ABS Square 1 x 1000 mm
1 x	L-Connector 1.5 mm x 1000 mm
1 x	Profile ABS Square 2 x 1000 mm
2 x	Profile ABS half cane 4x2.5x1000 mm
2 x	Profile ABS half cane 2.0x1000 mm
1 x	Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x	Profile ABS half cane 5.0x1000 mm
1 x	Profile ABS triangular 4.0x1000 mm 60º
1 x	ABS "T" angle 4.0x4.0x1000 mm
1 x	ABS "T" angle 10.0x10.0x1000 mm
1 x	ABS angle 6,0x6,0x1000 mm
2 x	Big-Malibu XL Roof box with surfboard rack GREY
1 x	Stickers-digit for marking
1 x	M3 Maxi ball link (2 uds)
1 x	Ball link M1.6 (6 uds)
1 x	M2,5 5Diam metal ball link V3 (2 pcs)
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	M2,5 5Diam black ball link V2 (2 pcs)
1 x	M2/M1/6 3Diam short black ball link V1 (6 pcs)
1 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x	Power supply NT 25 Amp.
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Cinta Goldfix 1m
2 x	SE Ring 400 mm (2 pcs)
1 x	Power supply NT 40 Amp.
1 x	SE Ring 300 mm (2 pcs)
2 x	SE Ring 360 mm (2 pcs)
1 x	SERVO HOLDER
2 x	Motor HP 220/30/A3 P4 5:1
1 x	Motor Advance 50-6
1 x	Extinguisher CO2 - 2 Kg
2 x	ASH 31 Mi Scale:1/3 - 7m, elevator
1 x	LOWER TOW HOOK
1 x	Motor Advance 30-10 F3A
1 x	Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor)
1 x	Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CW thr
1 x	Savox HV Brushless Servo SB-2270SG (Swashplate)
1 x	SAVOX SH 0254 servo
1 x	50N turbine start protection tube
1 x	L-Connector 4.0 mm x 1000 mm
1 x	Tank GFK Opus/JEt 300 ml
1 x	Ring support P-20 OPUS V-Jet 60mm
1 x	ABS rectangular profile 10x5.0x1000 mm
1 x	ABS angle 10,0x10,0x1000 mm
1 x	Spinner fixed propeller 60 mm / 5,0 mm
1 x	HAWK 100 ARF scale 1:4.75 2480 mm - PAINTED AH106
1 x	Birch plywood plate 600x300x1.5 mm
1 x	A/C quality beech plywood 600x300x1.5 mm
1 x	A/C quality beech plywood 1520x750x3.0 mm
1 x	Birch plywood plate 600x300x3.0 mm
1 x	Lite Plywood panel 600x300x3.0 mm
1 x	Birch plywood plate 600x300x4.0 mm
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x	Lite Plywood panel 600x300x2.0 mm
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	BD-5 Pro ARF
1 x	Balsa panel 2.0x100x1000 mm
1 x	BALSA triangular 8x8x1000 mm
1 x	Balsa panel 5.0x100x1000 mm
1 x	Birch plywood plate 600x300x4.0 mm
1 x	Birch plywood plate 600x300x2.0 mm
1 x	Balsa panel 1.0x100x1000 mm
1 x	A/C quality beech plywood 600x300x8.0 mm
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	Balsa panel 1.5x100x1000 mm
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x	A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x	A/C quality beech plywood 1520x750x4.0 mm
1 x	Balsa panel 10x100x1000 mm
1 x	A/C quality beech plywood 600x300x0.6 mm
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	ULTIMATUM 2.0 m white
1 x	ULTIMATUM 2.0 m green/black
1 x	resin-hardener package L-385 with hardener H-385
1 x	Hardener Aero EPH 161 (500 g)
1 x	Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g
1 x	resin-hardener L-385 H-385 (1250 g)
1 x	Servo JETI DSHV 3D13T (13 Kg)
1 x	MEKP Harderner 100 g
1 x	Hardener P-25, canister 2.5Kg
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg
1 x	Carbon plate 350x150x1.0 mm
1 x	Epoxy Resin L (2.5 Kg)
1 x	Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg
1 x	resin-hardener L-385 H-385 (625 g)
1 x	Shirt Hispano Aviación
1 x	BULL MØ1 2.600mm GREEN
1 x	BULL MØ1 2.600mm ORANGE
1 x	Canopy BULL MØ1 2.600mm
1 x	ULTIMATUM 2.0 m yellow/blue
1 x	Bags BULL Mo1 2.6m "Luxe"
1 x	Wing Joiner ULTIMATUM 2.0 m

32,092.82EUR