Top » Catalog » Hispano Aviacion » HABULLMo1G

3,950.00EUR

BULL MØ1 2.600mm GREEN
[HABULLMo1G]

BULL MØ1 2.600mm GREEN

An innovative structural design and its original design make the BULL Mo1 original and elegant.
Its NACA shots made by our aeronautical engineers make the Bull Mo1 possibly the most advanced aircraft in the market in terms of the design of "fluid dynamics" on an RC jet.
Fully built in "vacuum technology" with new materials and the most advanced techniques.
The construction quality is higher compared to the standard in the market.
Quick and easy to build.
The large opening at the top allows easy access for the installation of all electronic components and thus can be completely inspected. It has a lower access for the installation and testing of the turbine, with a completely new system for anchoring the turbine.
The flight characteristics are incredible at all speeds, but where it demonstrates its power is in its slow and harmonious flight.
Thanks to this feature, the BULL Mo1 can be flown by novice pilots, but they will delight the most extreme pilots.
The BULL Mo1 has been designed to be used with turbines from 13 Kg to 20 Kg. It is also possible to install a Vector trust to perform 3D maneuvers.
Factory building and custom painting service is available

Wingspan 2.600 mm
Lenght: 2.260 mm
Weigh kit aprox. 6.990 g
Turbine 13 a 20 Kg

under request

Reviews

Quick Find

Shopping Cart

1 x	Gasket, Aluminium-Plate >reed valve carrier DA-85, DA-100L, DA-1
3 x	Exhaust gasket DA50R DA100 DA200
1 x	Carburator spacer block DA-50R
1 x	Carburetorgasket DA-85, DA-100, DA-100L and DA-120
1 x	Gasket, from red carb carrier to crankcase DA-150L/170
1 x	Cylinder DA-50R, DA-100, DA-100L
1 x	Reed valve carrier, without reed valves DA-150L/170
1 x	Rear crankcase DA-50R
1 x	Pitts Muffler for D.A. 100
1 x	Hifht speed needle DA-50R/100I
1 x	Gasket, Carburetor DA-150/170
1 x	Ignition unit for DA-70/100/120/150/170/200
1 x	Gasket carburetor carrier->crankcase DA-85 DA-100L DA-120 DA-200
1 x	Prop washer DA-50R/60/70
1 x	Cer clip DA-50R, DA-60 DA-100 DA-100L DA-120, 1 piece
1 x	Cylindergasket DA 170
1 x	Gasket, from reed valve carrier to carb carrier DA-150L/170
1 x	Crankcase Gasket set for DA-60 / DA-120
1 x	Cylinder Gasket set for DA-60 / DA-120
1 x	Motor DA 100L
1 x	Motor DA 120
1 x	Cylinder for DA-85/170 (1 piece)
1 x	Cylinder for DA-60 and DA-120
1 x	Low speed needle DA-50R/100I
1 x	Gasket, Aluminium-Plate >reed valve carrier DA-170
1 x	Crankcase gasket DA-100
1 x	Hifht speed needle DA-50R/100I
1 x	Bearing upper rod DA-50R, DA-60, DA-100, DA-100L, DA-120
1 x	Paramotor BackPack XXS (without accessories)
1 x	Parachute PV6 for F3J
1 x	Parachute BACKUP X100
1 x	MAX pilot ARTF
2 x	LUCAS pilot ARTF
1 x	Wing OXY 0,5 pulgadas2
1 x	Para-RC Trike "RC-Bullix"
2 x	Rescue 1,8m2 / BackPack
1 x	Aramid 50 daN 50 m
2 x	Para-RC "RC-Evo-Cross" Rescue
1 x	Trike XL motor set (motor+esc+prop)
1 x	Wing OXY 5,0 m2
1 x	Paramotor Trike XL
1 x	Windsock Ozone L -1200 mm
1 x	Motor DLE 430 cc - Paramotors
1 x	CNC FPV Display screen&Transmitter Holder Vertical
1 x	Piston pin for DA50R/DA100
1 x	Carb Carrier, red DA-150L/170
1 x	Anntena Panel 5,8 GHz - 14 dBi
1 x	Vest clothes Hispano Aviación
1 x	5.8G Receiver Helical Antenna with protecting case (SMA plug) 12
1 x	Brass control horn M4 short for wire (4 pcs)
1 x	Propeller balancer
1 x	6 mm M3 variable inclined horn
1 x	Straightened rod Ø 1.5 mm x 1000 mm
1 x	Cable with accesories
1 x
1 x	Brass control horn M4 long for wire (4 pcs)
1 x	12.7 mm 2:1 black termoretract tube
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
1 x	Suncover 100cc Red
1 x	Soporte filtro FESTO (4 pcs)
1 x	EasyFLY Addon
1 x	Carbon fiber rod 1.0 mm x 1000 mm
1 x	Horn 6/27 with M3 Bearing
1 x	Adjustable brass horn threaded M3
1 x	Duralumium F3A horn 30x10x23,5 mm (2 pcs)
1 x	Support ECU Xicoy X-45
2 x	Horn DUBRO 1/2A
1 x	Digital scale up to 40 kg
1 x	Truck-trailer for gliders 720 x 239 mm
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x	ANGEL 48" pp red/blue/white
2 x	Fundas para el transporte F3A alas
1 x	Sun Cover PC 21 XXL (JMB Jets)
1 x	55% silver electrodes (2 pcs)
1 x	Horn 5/15 with M2 Bearing
1 x	6,4x1000 mm 2:1 blue termoretract tube
1 x	Carbon fiber rod 5.0 mmx1000 mm
1 x	Slave-cable USB Easy Sim
1 x	Horn 5/10 with M2 Bearing
2 x	Truck-trailer for gliders 720 x 285 mm
1 x	Straightened rod Ø 0.5 mm x 1000 mm
2 x	Angle of incidence meter
1 x	ORACOVER Fluor red (2 m)
1 x	6 mm blue aluminium threaded horn with patella
1 x	Brass hexagonal rod Ø 3 mm x 1000 mm
1 x	4,8x1000 mm 2:1 black termoretract tube
1 x	Brass rod Ø 0.5 mm x 1000 mm
1 x	100g Flux Paste for Silver Solder
1 x	Fresa corte diamante Ø 2.3mm (bola)
1 x	Field folding model stand
1 x	Support Filtro FESTO
1 x	Cut tube
1 x	Straightened rod Ø 0.8 mm x 1000 mm
1 x	Support pumb/filter Xicoy X45
1 x	Straightened rod Ø 1.2 mm x 1500 mm
1 x	Field folding model stand SebArt
1 x	Recessed MPX connector support (6 pcs)
1 x	Horn 20x28,5 mm (2 pcs)
1 x	Control horn long w/ball
1 x	Interface Realflight Simulator
1 x	Simulador RealFlight RF-9.5 S (sin emisora)
1 x	Carbon fiber rod 10 mm x 1000 mm
1 x	22 mm Cut Disc Proxxon/Dremmel
1 x	20 mm carbon horn
1 x	Parachute P4
2 x	Opale Rucksack
1 x	EDGE 540-A 105" (2660 mm)
1 x	PPM Encoder Module
1 x	ULTRA STICK 10 cc ARF
1 x	EXTRA 330 LX 2.34m ARF (LX-09) Pilot
1 x	SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm
1 x	TRAINER RC Pilot V2 90" w/r ARF
1 x	CARBON CUB FX-3 100-200CC ARF, 165" - 4200 mm (Hangar9)
1 x	Straightened threaded rod M3 - 1m
1 x	Horn for flap control (1 pcs)
1 x	ABS Strip 1.0x3.0x1000 mm
1 x	Set cintas unión paracaídas 145 cm
1 x	Straightened rod Ø 8.0 mm x 1000 mm
1 x	Straightened threaded rod M2-1m
1 x	Straightened rod Ø 3.0 mm x 1000 mm
1 x	Straightened rod Ø 7.0 mm x 1000 mm
1 x	6 mm red aluminium threaded horn with patella
1 x	Carbon fiber rod 1.5 mm x 2000 mm
1 x	Support conector MPX (6 pcs)
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	Brass control horn M4 short for wire (10pcs)
1 x	ABS tube 20.0x18.0x1000 mm
1 x	ABS "T" angle 2.0x2.0x1000 mm
1 x	ABS angle 10,0x10,0x1000 mm
1 x	ABS Strip 1.5x2.0x1000 mm
1 x	ABS angle 2,0x2,0x1000 mm
1 x	BULLIT Wing 1095 mm
1 x	Aluminium tube with fibreglass case ø35x1.5mm, 1m
1 x	Pilatus PC-21 50E RED/WHITE (SebArt)
1 x	ZEUS F3A 2m
1 x	Lipo KAVAN 5000 mAh 11.1v 40/80C
1 x	Pilatus PC-21 50E BLUE/WHITE (SebArt)
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg
1 x	resin-hardener L-385 H-385 (5000 g)
1 x	Horn micro type4 Ø 0,5 (2 pcs)

25,872.32EUR