Top » Catalog » Hispano Aviacion » HABULLMo1RDB

4,551.42EUR

BULL MØ1 2.600mm "RED BULL"
[HABULLMo1RDB]

$BULL MØ1 2.600mm \"RED BULL\"$

BULL MØ1 2.600mm "RedBull"

An innovative structural design and its original design make the BULL Mo1 original and elegant.
Its NACA shots made by our aeronautical engineers make the Bull Mo1 possibly the most advanced aircraft in the market in terms of the design of "fluid dynamics" on an RC jet.
Fully built in "vacuum technology" with new materials and the most advanced techniques.
The construction quality is higher compared to the standard in the market.
Quick and easy to build.
The large opening at the top allows easy access for the installation of all electronic components and thus can be completely inspected. It has a lower access for the installation and testing of the turbine, with a completely new system for anchoring the turbine.
The flight characteristics are incredible at all speeds, but where it demonstrates its power is in its slow and harmonious flight.
Thanks to this feature, the BULL Mo1 can be flown by novice pilots, but they will delight the most extreme pilots.
The BULL Mo1 has been designed to be used with turbines from 13 Kg to 20 Kg. It is also possible to install a Vector trust to perform 3D maneuvers.
Factory building and custom painting service is available

Wingspan 2.600 mm
Lenght: 2.260 mm
Weigh kit aprox. 6.990 g
Turbine 13 a 20 Kg

under request

Reviews

Quick Find

Shopping Cart

1 x	OPUS-V / Jet-CC-BF
2 x	Motor DLE 170 M- Paramotors
4 x	Motor DLE 430 cc - Paramotors
3 x	Silent-blocks DLE 170M
1 x	50N turbine start protection tube
1 x	Fibra de vidrio 80 g/m² (2 m x 100 cm)
1 x	Parachute BACKUP X100
1 x	Extra hard 250 ccm complete gasoline fuel tank
1 x	Conector FESTO G1/8 Quick 4mm 90º
1 x
1 x	Propeller diller for DA50, DLE55 red
1 x	Filler Gauges
1 x	Propeller FALCON 32,5x11 PUSHER Carbono
2 x	Propadapter for motor A50
3 x	Small Crow DLE-170M
1 x	DLA 116 crankshaft
1 x	Propadapter for motor A60-V2
1 x	Propadapter for motor A50-V3
1 x	Adapters for 7.5 - 35cc aircraft and naval engines
2 x	Big Crow DLE-170M
1 x	Green silicone 0,25 qmm wire (50 m)
1 x	Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm
1 x	80 mm rods set for direction control
1 x	Towing hook
2 x	Short ball link M2 (6 uds)
1 x	Cable grommet Ø 5 mm (4 uds)
1 x	Conexion PREMIUM MAXI fuselaje/alas 200 cm one4one
1 x	Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs)
1 x	Cable set PREMIUM , fuselage/wing one4one
1 x	JEEMO Kit ARF Basic (2 color Carbon finish) XTRALIGHT
1 x	20x1000 mm Ring Strap Back To Back
1 x	Black silicone 1,0 qmm wire (50 m)
1 x	Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs)
1 x	Mini Avanti S 1.4m blue/white/red CLASSIC
1 x	Ferrita con funda
1 x	SE Ring 200 mm (2 pcs)
1 x	SE Ring 360 mm (2 pcs)
1 x	Blind nut M5 (4 pcs)
1 x	Ball link M3 (10 pcs, flat ball)
1 x	Fuselage Bags JEEMO
1 x	Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs)
1 x	TURBINATOR 2 ORANGE/SILVER 1778 mm Combo
1 x	SE Ring 300 mm (2 pcs)
1 x	Mini Avanti S 1.4m white/red
1 x	Blind nut M4 (4 pcs)
2 x	Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x	Cable set PREMIUM, fuselage/wing
1 x	Suncover 100cc Red
2 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	Glases Flitemaster
1 x	M2,5 5Diam black ball link V2 (2 pcs)
1 x
1 x	Glases Nimbus "Black"
1 x	SERVO HOLDER
1 x	15 mm floating pad (30 pcs)
1 x	1 m servo "Premium" wire (white/red/blue)
1 x	Jeemo Dolly
1 x	Boomerang ELAN STARS & STRIPES Combo
1 x	Jeti Black cap
1 x	Short ball link M1.6 (6 uds)
1 x	TWIST planeador gomas
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 lilac pcs)
1 x	Ferrita 27x14x7 mm
1 x	Blind nut M6 (4 pcs)
1 x	IKARUS plane
2 x	28x5 mm wires output (2 pcs)
1 x	Protective open Cover for wires Ø 13 mm 1000 mm
1 x	Protective Cover for wires Ø 20 mm 1000 mm
1 x	45 mm rods set for direction control
2 x	Allen wheel collar M3x5
1 x	Ferrita 14x8x5.5 mm
1 x	JR silicone servo wire 0,35 qmm / 5m
1 x	Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x	Ball link M3 RPA's-UAV's
2 x	38x4,5 mm wires output (2 pcs)
1 x	Aluminium cap bolt washer M4 green (8 pcs)
1 x	Cable grommet 9.5 mm (4 uds)
1 x	LOWER TOW HOOK
1 x	12 mm floating pad (49 pcs)
1 x	M2/M1/6 3Diam short black ball link V1 (2 pcs)
1 x	Joint with bearing M3 22x5,5
1 x	Aluminun wheel collar 3 mm Ø (4 uds)
1 x	1.2L Kevlar tank for this mini SebArt Jet
1 x	Blind nut M3 (4 pcs)
1 x	Mini Avanti S 1.4m yellow/black
1 x	Tape GFK 38 mm
1 x	M3 Maxi ball link (2 uds)
1 x	Glases Ace
1 x	Blind nut M6 (4 pcs)
1 x	Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	M2,5 5Diam metal ball link V3 (2 pcs)
1 x	Ring 320 mm length (5 pcs)
1 x	Glases Moritz
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	Long ball link M3 (6 uds)
2 x	SE Ring HACKER 300 mm (2 pcs)
1 x	Allen wheel collar M4x6
1 x	SE Ring 450 mm (2 pcs)
1 x	Foil for sticking flaps and ailerons
1 x	Canopy Latch
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	RANGER Jet CANADA 1.854mm combo
2 x	Avanti XS Jet , Fuselage Stand (SebArt)
1 x	BULL MØ1 2.600mm "RED BULL"
1 x	ULTIMATUM 2.0 m green/black
1 x	Y-Hose connector 3-3-3 mm
1 x	Y-Hose connector 4-4-4mm
1 x	Landing gear strap medium (4 uds)
1 x	Fail Safe air retract
1 x	Body for landing gear Ø 4 mm
1 x	Motor 2212 (1000KV) Quadcopter F450
1 x	Quick hose connector 4-4 mm
1 x	Quick hose connector 4-4 mm
1 x	Y-Hose connector 6-6-6 mm
1 x	Landing gear retract neumatic (Jet Legend)
1 x	Landing gear axle Ø 5 mm (2 uds)
1 x	Motor Advance 50-6
1 x	Tap FESTO 6-6 mm
1 x	Air pressure gauge
1 x	Manometer 4 mm
1 x	T-Hose connector 2-2-2 mm
1 x	Quick hose connector 6-6 mm
1 x	Mini neumatic retract landing gear
1 x	T-Hose connector 6-6-6 mm
1 x	T-Hose connector 3-3-3 mm
1 x	Y-Hose connector 2-2-2 mm
1 x	Body for landing gear Ø 3 mm
1 x	Trailing leg 131 mm
1 x	PHASOR RACE 2035/2100 2D
1 x	Mini neumatic retract 3 mm landing gear (Het-rc)
1 x	Neumatic retractable landing gear (Aero-Naut)
1 x	Faucet FESTO
1 x	Tap FESTO 4-4 mm
1 x	Landing gear axle Ø 4 mm (2 uds)
1 x	Servo arm with 5 mm hole to FEMA 9810A
1 x	Wheel cover holder Ø 6 mm (2 uds)
1 x	PHASOR RACE 2035/4100 1D
1 x	40 mm air cylinder
1 x	T-Hose connector 4-4-4mm
1 x	Motor Advance 30-10 F3A
1 x	Check valve quick hose connector 4-4 mm
1 x	Quick hose connector 3-3 mm
1 x	Festo Adaptor Tygon Large/4mm
1 x	Servo arm with 4 mm hole to FEMA 9810A
1 x	Combo FOXY C3530-570 + FOXY 80 amp
1 x	Combo FOXY C3530-700 + FOXY 80 amp
1 x	FOXY G2 C3530-700
1 x	Combo RAY C3542-1000 + ESC 60A
1 x	Motor brushless 1806 - 2300 Kv Cuadracopter
1 x	GLOW 5C + accesories
1 x	FALCON 24X12 CARBON PROPELLER (GAS)
1 x	152x46 Ø6.0 mm aluminium core wheel
1 x	Propeller diller for DLE170
1 x	3-blades 29x12 carbon prop Super Silence
1 x	115x29 mm (4.50") Type jets aluminium core wheel
1 x	Propeller diller for DLE111 and DA85-150
1 x	Propeller diller for EME35 and DLE35
1 x	PC-21 XXL Bags
1 x	VIPER SL YELLOW PNP 2270 mm
1 x	PC-21 2.880 mm WHITE/RED
1 x	Charger GensAce IMARS Dual Channel AC200W/DC300Wx2
1 x	TA1200 Charger Compatible with Smart and Standard LiPo Batteries
1 x	55% silver electrodes (2 pcs)
1 x	1000 ccm complete gasoline fuel tank
1 x	3-blades 24x12 carbon prop Super Silence
1 x	30x14 prop Super Silence
1 x	64x20 mm (2.5") Type jets aluminium core wheel
2 x	Alu-Cross for Backmount of A60-V2-Backmountmotors
1 x	3-blades 27x12 carbon prop Super Silence
1 x	35x14 mm hard foam KOVO wheel (2 pcs)
2 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	DUBRO - 102MM / 4" DIA BIG WHEELS (400RV) - 2PCS
1 x	76 mm light wheels (2 pcs)
1 x	1000 ccm gasoline fuel tank
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	73x24 mm hard foam KOVO wheel (2 pcs)
1 x	Tacometer mini ignition RCEXL
1 x	24x14 prop Super Silence
1 x	101x28 mm (4.0") Type jets aluminium core wheel
1 x	VIPER SL NAVY PNP 2270 mm
1 x	FELIX JR Red/Yellow 1750 mm
1 x	PC-21 XXL 3.395 mm
1 x	MIRAGE 2000 Camuflage PNP
1 x	PC-21 2.880 mm RAAF Sheme
1 x	MB339 Saudi PNP
1 x	VIPER SL Thunderbird PNP 2270 mm
1 x	MIRAGE 2000 TIGER PNP
1 x	PC-21 2.880 mm (w/o oracover)
1 x	Power Box GPS Sensor III
1 x	6 mm Quick clamp_S (10 pcs)
1 x	ALBATROS L-39 G2 "Camo Tiger" Turbine ready
1 x	Servo HITEC HS-125 MG
1 x	Extension for LC-Display 50cm
1 x	SERVO DES 658 BB MG
1 x	Extension for SensorSwitch 30cm
2 x	Servo M2x9/16 screw (4 pcs)
1 x	Aluminun wheel collar 5 mm Ø (4 uds)
2 x	Spring lock washer 4.1 mm (20 pcs)
1 x	STEERING FRONT WHEEL SYSTEM BIDULE 55
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Cap closure 33/23.5mm (2 uds)
1 x	Tapping Screw M2.2x13 (10 pcs)
1 x	Titanium M3x0,5x8 mm Flat Head screw (4 pcs)
1 x	Screw M3x20 (10 pcs)
1 x	Socket Head Screw M2x10
1 x	Spring lock washer 2.1 mm (20 pcs)
1 x	Tornillo cabeza boton M4x12 mm (5 pcs)
1 x	Spring pin Ø 1 x 6 mm (10 pcs)
1 x	Tape GFK 25 mm
1 x	Locking cable tie 4.6x203 (uds)
1 x	20x200 mm battery rings
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	M3 Maxi ball link (2 uds)
1 x	Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs)
1 x	Blind nut M5 (10 pcs)
1 x	SE Ring 250 mm (2 pcs)
1 x	Set transmisions BULL Mo1 (dura/aluminium)
1 x	Oracover Black 10 m
1 x	Extension for SensorSwitch 60cm
1 x	Blue silicone 0,5 qmm wire (50 m)
1 x	PVC 0,35 qmm servos wire Graupner (100 m)
1 x	PowerBox Evo
1 x	MicroMatch PowerBox
1 x	Protective Cover for wires Ø 6 mm 1000 mm
1 x	PowerBox PowerExpander SRS
1 x	Servo HITEC D-955 TW Titanium
1 x	SERVO DES 806 Pignons
1 x	PVC 0,14 qmm servos wire Hitec/Mpx (5 m)
1 x	PowerBox MAG Sensor
1 x	10m servo "Premium" wire (white/red/blue)
1 x	Brazo servo aluminio HITEC HS-125MG/5125MG
1 x	PowerBox Competition SR2
1 x	PVC 0,14 qmm servos wire JR/Graupner (5 m)
1 x	Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
1 x	PVC 0,08 qmm Futaba servos wire (5 m)
1 x	PowerBox iGyro SRS + GPS Modul
1 x	Soporte metal para servos
1 x	2 piece mounting frame Battery 3200 / 4000
1 x	Pushrod greyline 4/3 with coupler M3
1 x	Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs)
2 x	Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled
1 x	Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs)
1 x	Tow hook for tug
1 x	Boomerang SPRINT V2 Yellow/Black
2 x	Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs)
1 x	Towing hook <3m
1 x	Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs)
1 x	Fixed launching hook
1 x	Fully Threaded Steel Rod M2,5 (2 uds)
1 x	TURBINATOR 2 RED/WHITE 1778 mm Combo
1 x	Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs)
2 x	Threaded insert M4 (4 pcs)
1 x	Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs)
1 x	60x25 mm tail wheel "type F3A"
1 x	PC-21 2880 mm Propeller 5 blade 20x10 K45TP Scale composite
1 x	Rotorshape Autogyro
1 x	Screw M4x12 (10 pcs)
1 x	Socket Head Screw M2x5
1 x	Socket Head Screw M2,5x12
1 x	Tapping Screw M2.9x13 (10 pcs)
1 x	Threaded insert M3 (4 pcs)
1 x	Screw M3x8(10 pcs)
1 x	Screw M3x16 (10 pcs)
1 x	Screws 2,2 x 6,5 mm (20 pcs)
1 x	Screw M3x5 (10 pcs)
1 x	Servo M2x5/16 screw (4 pcs)
1 x	Screw M3x30 (10 pcs)
1 x	Threaded insert M6 (10 pcs)
1 x	Treaded hexagonal socket insert M4 Br (4 pcs)
1 x	Spring lock washer 2.6 mm (20 pcs)
1 x	Socket Head Screw M2x8
1 x	Servo M2x7/16 screw (4 pcs)
1 x	Threaded insert M5 (10 pcs)
1 x	Tapping Screw M2.9x9.5 (10 pcs)
1 x	Tapping Screw M2.2x9.5 (10 pcs)
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	PPS-4D Propeller
1 x	Gear for MICRO BB
1 x	Servo Dymond D 37 Eco
1 x	Blind nut M2 (10 pcs)
1 x	XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell
1 x	Anodized alum. M4x0,7x25 mm Button Head screw (4 blue pcs)
1 x	Silicone red 4,0 qmm wire (25 m)
1 x	POWERBOX Magic Jeti Switch Royal SRS, Champion SRS
1 x	Servo GO-12S70MG 20.5kg.cm 0.06s/60º
1 x	Aluminium cap bolt washer M3 blue (8 pcs)
1 x	6 mm hexagonal ball link M3 (10 pcs)
1 x	Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs)
1 x	Tank ULTIMATUM 2.0 (3.2 L) PRO
1 x	Avanti XS Jet , Tank for Keroseno (SebArt)
1 x	SERVO DES 588 BB MG
1 x	ULTIMATUM 2.0 PRO "Full Carbon Red"
1 x	Bags de Luxe ULTIMATUM 2.0

98,024.29EUR