Top » Catalog » Hispano Aviacion » HABULLMo1R

3,950.00EUR

BULL MØ1 2.600mm RED
[HABULLMo1R]

BULL MØ1 2.600mm RED

An innovative structural design and its original design make the BULL Mo1 original and elegant.
Its NACA shots made by our aeronautical engineers make the Bull Mo1 possibly the most advanced aircraft in the market in terms of the design of "fluid dynamics" on an RC jet.
Fully built in "vacuum technology" with new materials and the most advanced techniques.
The construction quality is higher compared to the standard in the market.
Quick and easy to build.
The large opening at the top allows easy access for the installation of all electronic components and thus can be completely inspected. It has a lower access for the installation and testing of the turbine, with a completely new system for anchoring the turbine.
The flight characteristics are incredible at all speeds, but where it demonstrates its power is in its slow and harmonious flight.
Thanks to this feature, the BULL Mo1 can be flown by novice pilots, but they will delight the most extreme pilots.
The BULL Mo1 has been designed to be used with turbines from 13 Kg to 20 Kg. It is also possible to install a Vector trust to perform 3D maneuvers.
Factory building and custom painting service is available

Wingspan 2.600 mm
Lenght: 2.260 mm
Weigh kit aprox. 6.990 g
Turbine 13 a 20 Kg

under request

Reviews

Quick Find

Shopping Cart

1 x	Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x	Carbon Non-Woven, 240 g/m² 100 cm x 20 m
1 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
2 x	Carbon Non-Woven, 160 g/m² 127 cm 1 m
1 x	Demoulding wedge red (40 x 20 mm) 5 pcs
1 x	Carbon Non-crimp ST 200 g/m² 50 cm x 5 m
1 x	Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x	Carbon Non-Woven, 240 g/m² 100 cm x 2m
1 x	ARAMID honeycomb 1300x2600x2 mm
1 x	Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x	Carbon Non-crimp ST 200 g/m² 50 cm x 20 m
1 x	Carbon fibre sleeve 12k 170 mm x 5m
1 x	Carbon Non-Woven, 160 g/m² 100 cm 5m
2 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
2 x	15 mm reinforced hinge
2 x	Nylon hinge 15x0,3 (10 pcs)
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x	Large flex hinge (12 uds)
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
1 x	Gates hinge 30x16 mm (2 pcs)
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
2 x	Small pinned hinge (12 uds)
2 x	Long pinned hinge (12 uds)
1 x	Pin type hinge Al 6x98 mm (2 pcs)
2 x	Nylon hinge 20x20x0,3 (10 pcs)
2 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
3 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
2 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
2 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	Gates hinge
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	Micro flex hinge (12 uds)
1 x	Long pinned hinge (6 uds)
1 x	Flap hinge (6 pcs)
1 x	Gates hinge aluminium (1 pcs)
2 x	Shirt Hispano Aviación
1 x	Vest clothes Hispano Aviación
1 x	Fiberglass plate 1200x1000x0,2 mm
1 x	Peel ply 95 g/m² (plain weave) 20 mm x 100 m
1 x	Carbon plate 550x350x2.5 mm ECOTECH
1 x	ABS 500 x 400 x 0,5 mm (white)
1 x	Styrene plate 320x120x1.0 mm
1 x	Carbon plate 550x350x3.0 mm ECOTECH
1 x	Styrene plate 320x120x0.5 mm
1 x	Foam plastic plates (310x210x5 mm)
1 x	Carbon plate 550x350x4.0 mm ECOTECH
1 x	Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	White smoke bombs AX-60 (5 pcs)
2 x	White smoke canister 100 g
1 x	Initior Receiver FRX2 Wireless
1 x	Yellow smoke canister 100 g
1 x	Smoke set "S"
1 x	White smoke bombs AX-3 (10 pcs)
1 x	"S" set for boats
1 x	Blue smoke canister 100 g
1 x	AX-60 starters (5 pcs)
1 x	Smoke set "Glider"
2 x	Electric rocket starters (6 pcs)
1 x	Parachutist
1 x	Yellow smoke canister 65 g
2 x	Ventral support for AX-18/AX-60
2 x	Yellow smoke canister 140 g
1 x	Initior Transmitter FTX2 Wireless
3 x	Remote electric ignition system
1 x	"S" set for planes
3 x	AX-60 starters (5 pcs)
1 x	PVC grid straight 290x185x0.32 mm
1 x	CM-3
1 x	TP/TopFuel - JST-EH 4/5S Adapter
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	Strip 2,5x1,25x330 mm
1 x	ABS Strip 1.5x3.0x1000 mm
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
2 x	Flap hinge 33x9 mm (6 pcs)
1 x	Carbon Non-Woven, 240 g/m² 100 cm x 5m
1 x	Program 5v SIO RS 232
1 x	Crystal Universal RX 35.070 Ch 67
1 x	Crystal TX 35.050 Ch 65
2 x	Pin hinge 34x16 mm (10 uds)
1 x	Blade holder metal LAMA
1 x	Flybar support metal LAMA
1 x	Gates hinge black 30x16 mm (2 pcs)
1 x	ROBART POINT HINGE 4,7mm (5 pcs)
1 x
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	Cooler motor type 300
1 x	Cooler motor type 400
1 x	Radial heatsink for MPJ AC25/35-xx motor
1 x	Motor holder for AC 28/7
1 x	Small flex hinge (12 uds)
1 x	Green smoke canister 140 g
1 x	Glass fabric 425 g/m² aero,10x1m
1 x	Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 5 m
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x	PVC grid diagonal 290x185x0.32 mm
1 x	Glass fabric 390 g/m² (silane, twill) 100 cm x 20m
1 x	Glass fabric 390 g/m² aero,10x1m
1 x	Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m
1 x	Peel ply 95 g/m² (plain weave) 100 mm x 100 m
1 x	Peel ply 64 g/m² (plain weave) 150 cm x 10m
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Oracover Brown 2 m
1 x	Smoke set "M"
1 x	White smoke bombs AX-9 (10 pcs)
1 x	T-Motor U7-V2.0 Kv420
1 x	Red smoke canister 65 g
1 x	Black smoke bombs AX-60 (5 pcs)
1 x	White smoke bombs AX-18 (5 pcs)
1 x	BULL MØ1 2.600mm "McLAREN-GULF"
1 x	ULTIMATUM 2.0 m yellow/blue

15,087.25EUR