Top » Catalog » Hispano Aviacion » HABULLMo1RDB

4,551.42EUR

BULL MØ1 2.600mm "RED BULL"
[HABULLMo1RDB]

$BULL MØ1 2.600mm \"RED BULL\"$

BULL MØ1 2.600mm "RedBull"

An innovative structural design and its original design make the BULL Mo1 original and elegant.
Its NACA shots made by our aeronautical engineers make the Bull Mo1 possibly the most advanced aircraft in the market in terms of the design of "fluid dynamics" on an RC jet.
Fully built in "vacuum technology" with new materials and the most advanced techniques.
The construction quality is higher compared to the standard in the market.
Quick and easy to build.
The large opening at the top allows easy access for the installation of all electronic components and thus can be completely inspected. It has a lower access for the installation and testing of the turbine, with a completely new system for anchoring the turbine.
The flight characteristics are incredible at all speeds, but where it demonstrates its power is in its slow and harmonious flight.
Thanks to this feature, the BULL Mo1 can be flown by novice pilots, but they will delight the most extreme pilots.
The BULL Mo1 has been designed to be used with turbines from 13 Kg to 20 Kg. It is also possible to install a Vector trust to perform 3D maneuvers.
Factory building and custom painting service is available

Wingspan 2.600 mm
Lenght: 2.260 mm
Weigh kit aprox. 6.990 g
Turbine 13 a 20 Kg

under request

Reviews

Quick Find

Shopping Cart

1 x	O-ring Saito FG-73 5cyl
1 x	Motor Saito FG-90 R3, 90 cc
1 x	Carburator gasket MOKI
2 x	Muffler DLE 20-RA
1 x	DLE 85 Ignition unit
1 x	Motor DLE 120 cc
1 x	CILINDER FOR DLE55, DLE111, DLE222
2 x	Cap Hispano Aviación
2 x	Blade holder metal LAMA
2 x	RM-85FSI 4-stroke inline gasoline engine
1 x	Motor Saito FG-100 TS, 100 cc
1 x	Motor Saito FG-36, 36 cc
1 x	Escape O-Ring ZIMMERMANN FG-84/90 R3
1 x	Cooler motor type 280
3 x	Cooler motor type 300
2 x	Motor holder for AC 28/7
2 x	Radial heatsink for MPJ AC25/35-xx motor
2 x	BALSA trip 6.0x6.0x1000 mm
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	BALSA trip 3.0x5.0x1000 mm
1 x	Propeller POWER-PROP 14x9
1 x	Propeller POWER-PROP 13x10
1 x	Propeller APC 12x3.8 SF
1 x	Propeller APC 12x6 Electric Pusher
1 x	Propeller APC 11x4.5 Electric Pusher
1 x	Propeller APC 11x7 SF
1 x	Aluminum Bayonet / strongal D35 mm / 1 m
1 x	Xplorer3 anemometro
1 x	Hot Glue Stick BLACK
1 x	Z Bender - S Type Tool
1 x	Propeller POWER-PROP 16x10
1 x	Propeller POWER-PROP 10x7 Izda
1 x	Propeller APC 12x8 Electric
1 x	Propeller electric carbon 10x7
1 x	PROPELLER ELECTRIC glass 9,5x6
1 x	Propeller electric carbon 6.5x4
1 x	Propeller POWER-PROP 10x7
1 x	Propeller POWER-PROP 11x9
1 x	Propeller APC 10x5 Electric Pusher
1 x	Propeller electric carbon 7x7
1 x	Propeller POWER-PROP 14x8
1 x	Propeller POWER-PROP 14x9 Izda
1 x	Propeller APC 10x4.7
1 x	Xoar Electric Beechwood Prop 12x6
1 x	Xoar Electric Beechwood Prop 15x8
1 x	Xoar Electric Beechwood Prop 24x8
1 x	Xoar Electric Beechwood Prop 22x10
1 x	Xoar Electric Beechwood Prop 16x7
1 x	Xoar Electric Beechwood Prop 21x10
1 x	Baseplate servo
1 x	Starter 12v (Max 90 and 15ccm)
1 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	Antenna Cloverleaf 5.8 GHz Tx - Rx
1 x	Electric starter suitable for the DLE111, DLE120 and DLE85.
1 x	Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x	Digital precision scale up to 2000 g
1 x	Panasonic Eneloop AA 1,2 V battery 19>00 mAh
1 x	Squared carbon wing joinner 5x5x220 mm
1 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x	Sanyo Eneloop AAA 1,2 V battery 800 mAh
1 x	Starter 12v (Max 180 and 30ccm)
1 x	Ball link Aluminio M3 (2 pcs)
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Hot Glue Stick RED
1 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x	Oil FUCHS 1 liter
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x	Softshell Hispano Aviación
1 x	Shirt Hispano Aviación
1 x	Vest clothes Hispano Aviación
1 x	Ignition RM-25V
1 x	Adapter 5,0 mm M6 for spinner 40 mm fixed propeller
1 x	Locking cable tie 2.5x100 (uds)
1 x	Savox HV Brushless Servo SB-2270SG (Swashplate)
1 x	Landing gear Rocket 400
1 x	Shaft sleeve LAMA
1 x	Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x	2,3 mm Prop Adapter M5
1 x	Adapter 2,3 mm M5 for spinner 30 mm fixed propeller
1 x	Flybar support metal LAMA
1 x	Adapter 5,0 mm M8
1 x	Helices DJI Mavic Air STEALTH "Black" (4x Ud)
1 x	P 17×5.8 Prop-2PCS/PAIR
1 x	Carb Carrier, red DA-85, DA-100L and DA-120
1 x	Beech dowels 10 mm x 1000 mm
1 x	15 cm PTFE-tubing for 25 mm tubes
1 x	60 mm long Prop hub for ZG45SL, ZG62/S/SL and ZG80B
1 x	Beech dowels 2.0 x 1000 mm
1 x	BALSA triangular 6x6x1000 mm
1 x	Beech dowels 4.0 x 1000 mm
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	27x10 prop Super Silence
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Propeller APC 14x10 Electric
1 x	Cylinder for DA-60 and DA-120
1 x	Cer clip DA-50R, DA-60 DA-100 DA-100L DA-120, 1 piece
1 x	Cooler motor type 400
1 x	Cooler motor type 150
1 x	BALSA leading edge 8x10x1000 mm
1 x	3-blades 20x10 carbon prop Super Silence
1 x	Mahogany wood slat 1.5x1.5x1000 mm
1 x	BALSA trip 8.0x8.0x1000 mm
1 x	3-blades 29x12 carbon prop Super Silence
1 x	Walnut wood slat 1.5x1.5x1000 mm
1 x
1 x	3-blades 28x12 carbon prop Super Silence
1 x	3-blades 21x12carbon prop Super Silence
1 x	BALSA trip 10x10x1000 mm
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	BALSA triangular 8x8x1000 mm
1 x	30x14 prop Super Silence
1 x	500 ccm gasoline fuel tank
1 x	500 ccm complete gasoline fuel tank
1 x	24x14 prop Super Silence
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	100g Flux Paste for Silver Solder
1 x	24x10 prop Super Silence
1 x	Linden wood slat 2.0x2.0x1000 mm
1 x	1000 ccm complete gasoline fuel tank
1 x	Pine wood slat 10x10x1000 mm
1 x	28x12 prop Super Silence
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	55% silver electrodes (2 pcs)
1 x	10cm Flexible Stainless Steel Exhaust Tubing D=25mm
1 x	OBECHI sheet 2.0x3.0x1000 mm
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	1000 ccm gasoline fuel tank
1 x	3 mm metalic joint for DA-35 or DA-75 cilinder/elbow
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	3,9 mm ZG20-ZG38 servo arm
1 x	Pine wood slat 6.0x6.0x1000 mm
1 x	ULTIMATUM 2.0 m green/black
1 x	ULTIMATUM 2.0 m white
1 x	Connectors banna oro 3,5 mm (M/F)

19,061.41EUR